Customizing legend text

Hi!
I've developed a graph in jdev by:
1. Creating a stub for some web service.
2. Creating a data control of the stub.
3. Dragging the data control into a jsp page as a graph.
4. Setting up the graph to show the correct data.
Now I want change the legend text, since it shows the attribute name of the Java object, which is rather ugly. Can anyone tell me how to customize the legend text or point me to some relevant documentation?
I'm using:
BI Beans Graph version [3.2.1.0.13]
JDev 10.1.2.1.0

Hi Sergio
No formatting is not the problem.
After validating my input fields i get the error message: "2 errors occured" as notification above the navigation bar
below both input fields i get my own field error texts in german.
Now i want to have the text "2 errors occured" in german too
thanks,
Jochen

Similar Messages

  • Custom UI Text in DPS in Android Apps

    Hi,
    Is there any documentation on how to customize the sign in button text for DPS Android apps like the one for iOS apps?
    Customizing UI text in DPS iOS apps
    Thanks!

    This feature isn't supported with the Android or Windows viewers.
    Neil

  • LSMW for Customer master text upload

    Hi
    I would want to upload the customer master text using LSMW. I see a message type /DSD/HH_CUSTMASTEXT (Customer master additions) being available.
    has anybody used this for text upload??
    I am not sure how it works, i dont see the provision to enter the text unlike the "SAVE_TEXT function module.
    If any one of you have used it, kindly let me know.
    Thanks
    Manju

    Hi Srinivas,
    yes we could do the text upload using direct input method. I need to invoke it from web methods, it would be difficult with direct input method and hence i was looking for using IDOC's.
    Regards
    Manju

  • Chart Legend, Text Change (Batch)

    Hi,
    I have about 40 reports all with the same charts, and the legend label uses the field labels so they look like "count of open accounts to date."  While I can change the text names when I select the legend text in the Preview pane, it is only a band-aid fix because I don't want to have to manually change this text for all 40 of my reports.  It'll add up to over 200 manual text edits!!
    Please tell me there is a better way!!
    I have CRXI
    Thank You,
    Frank

    Hi Frank
    Take a look here: @ Symbol in formula name when using formula for report chart data
    I think this thread can help you.
    Regards
    Fabio

  • Customer Master text replication

    Hi all,
    does anyone know if it is possible to replicate R/3 customer master texts across to CRM via the standard customer master replication to CRM?
    regards
    Jens

    Hi Jens,
    Yes, it's possible.
    At R/3 side, using t-code SM30, configure table vision V_CRMTXTID to map the customer texts ID's of R3, with the CRM ones.
    Something like this (entry example):
    KNA1 0002 'some description' -> BUT000 0002
    Kind regards,

  • Custom infotype text in various languages

    Hi All,
    How can we maintain the Custom Infotype text in different language in table T582S.
    When I tried using view V_T582S, by default it is giving entries in only logon language.
    Is there any other way to convert the text of custom infotypes to some other languages.
    Thanks in advance.
    Regards,
    Atish

    hi
    check the table T582T.
    regards
    Manish
    reward points if helpful

  • Custom Infotype text in V_T582S or T582S

    Hi All,
    How can we maintain the Custom Infotype text in different language in table T582S.
    When I tried using view V_T582S, by default it is giving entries in only logon language.
    Is there any other way to convert the text of custom infotypes to some other languages.
    Thanks in advance.
    Regards,
    Atish

    Hi sanjay,
    I went through SPRO but couldn't find the same where we can maintain the translation.
    Sesh, I checked in SE11 also, there the translation is enabled but I can't change from lets say EN to FR.
    Is there any other way?
    Regards,
    Atish

  • Legend Text Wrapping

    Is it possible to wrap the legend text for a combination chart? I am placing the legend at the bottom of the chart and have long series names that scroll out of the object box.

    My current problem is similar to what was raised by Chris in September.
    I report mass of data in the same stacked chart with different number of responses. The Legend, which was placed on the top of the chart appears always in one row regardless of 2 or 10 items (responses) are shown. In many cases the Legend line/band runs out of the object.
    Line break on items does not help as they just break one item but not the full legend "band" into two lines. I supposed it will wrap automatically but it does not do so.
    Do you have any idea / solution / tip for me?
    It would be highly appreciated!
    (I am on Engage 2008)
    Cheers, Peter

  • Reg: Reports Grapgh Wizard(Customizing Legend label)

    Hi all,
    I am working on oracle 10g reports.I am creating a report with graph.In my data model i have 2 tables both has the 2cloumns each and the names of the columns are same(like.. Series1,series2).So when i created the report. in the paper lay out when i am select the source for a field it gives Series1,series2,series3,series4.
    So using these i created 2 graphs for two tables. But my issue is when i saw the output.In the legend for 1st graph is series1 and series2 but for 2nd grapg it shows series3 and series4. But actually my requirement is it has to show Series1 and series2 only as these are the actual names of the fields.
    One more example, you might have different cities represented by data markers of different colors. Markers represent data on a graph. If red markers in your graph represent New York, then there is a corresponding red legend marker in the legend area, with legend text reading "New York." But i want to show this in legend as "NY" instead of "New York"....
    Do any one has any idea about this legend label customization.
    Thanks in advance...

    Mascse,
    I'm guessing you've already found the answer but try this if you haven't.
    On the top line of the graph settings, you should see the dataValues. Add the same number of dataLabels and that may solve your problem.
    dataValues="CAT1_num,CAT2_num,CAT3_num,CAT4_num" dataLabels="Front Desk, General, Nursing, Physician"

  • Add custom long text in MM01/02/03

    Hii ,  expert ?
    I need to add custom long text  in MM beside existing basic data text, inspection text, internal comment , purchasing text ,sales text , How to do it ?
    Thanks
    ads

    Hi Alonso,
    I don't have sap environment currently , but there is  link  for further reading ,
    Getting Started with Switching, Enhancing, and Adapting Standard Programs
    SAP Implicit enhamcement points - ABAP
    regards
    Doni

  • How to configure customized rich text editor in a dialog

    I have a customized rich text editor component in my project which i want to use it in a dialog component.
    I tried by changing the xtype value from 'richtext'  to the customized rich text editor path as '/apps/project1/components/shared/text_rte' but i am not able to see the editor.

    See http://stackoverflow.com/questions/1946426/html-5-is-it-br-br-or-br for your <br> example.  <br/> is XHTML, not necessarily needed in HTML5.

  • Select query for sales order for particular customer oder text and storage

    Hi All,
    I am trying to retriev customer order text and customer storage bin from the following select query, but it's giving huge number of records, I want to restrict the number of records.
    Select customer order text, customer storage bin
                       Select STXH–TDOBJECT, STXH–TDID
                       Where  TDOBJECT = VBBP
                              TDID = Y001
                              TDID = Y007
    Please let me know how to restirct the number of records.
    Thanks,
    Ranjan

    Try using the FM 'READ_TEXT'.
    NAME will be the order number concatenated with the item number.
    And you have the ID and OBJECT.  You may also need to use the LANGUAGE.
    Message was edited by:
            Matt Nagel

  • Legend text turns black when converting a .ppt to .pdf

    I have a picture of an Excel graph pasted into Powerpoint as an Enhance Metafile.  When I convert the .ppt to .pdf, the legend text in the graph turns into a black filled box. Can you tell me how to avoid this? Thanks!

    This isn't the proper forum for that. This is for the free Reader application which does not convert files to PDF.
    Depending on what you actually use to convert to PDF, you may need a Microsoft forum or the Adobe Acrobat forum.

  • Custom Language text

    Hi All,
    How to add custom language texts for use in the logon page component?
    Can any help me.
    -Venkat

    Hi,
    Please navigate to the following path
    usr/sap/instance/JC00/j2ee/cluster/server0/apps/sap.com/irj/servet_jsp/irj/root/web-inf/portal/portalapps/com.sap.portal.runtime.logon
    Here Naviagate to lib folder and open up umelogonbase.jar
    You will find a number of properties files. You can simply change the text in any of the langaue files.
    This is the simplest solution that you can have.
    Thanks,
    Harish
    (Please provide reward points for useful answers)

  • Graph Legend text size

    Hello,
    i cant find an attribute to set the text size of the graph legend.
    There are som Plot Attributes to set the font and font length but no Attribute for the size?
    How can i set the size of the grapg legend?
    Thanks
    Norbert Rieper

    You can use a metafont that you create yourself, and thus use a custom size. For example:
    CreateMetaFont ("my font", VAL_DIALOG_META_FONT, newSize, 0, 0, 0, 0);
    SetPlotAttribute (panel, PANEL_GRAPH, plotId, ATTR_PLOT_LG_FONT, "my font");

Maybe you are looking for