Legend View Not Working in Compound view OBIEE 10.1.3.4.1

Hi All,
One of our project reports( OBIEE 10.1.3.4.1) need to render result set in the compound view format.
Compound view should comprise of Title view,Table View and Legend View respectively.
All of the above views have been combined in the compound view,but the legend view is not appearing in the compound view.
A point to be noted here is the result set is being fetched from the stored proc.
Any thoughts?Please advise.
Hope its not a limitation:)
Regards,
Prasad

Thanks for responding my Query,
Here I have to get the report with "COMPUND LAYOUT" with "LEGEND" But Legend should disply first I mean top of the compound Layout.
I implimented report like this..
1) I developed a Normal report in "Answers" for this report I created one Dashbaord prompt as well.In the dashbaord I used "REQUEST Variable" for dynamically get the result based on the I/P given in the "Prompt".
2) So, then I kept Dashboard promt and Report on the Dashboard Section as a single Section .
3) If I give any I/P in the PROMPT based on that report get populated with LEGEND would be top and COMPOUND LAYOUD should be bottom.
4) But I got only Compound Layout only LEGEND was not get populated on the DB.
Do you have solution for this? Please let me know how to do?
Regards,
Prasad.

Similar Messages

Audio fade not working in compound clip

How are you doing? When I have a compound clip of multiple audio files, the fade handle doesn't seem to be affecting the audio like it did before the update.
Below is an example...

actually, that audio compound clip is not inside the compound clip. What you are seeing is multiple audio files compounded together. When I do this, the fade does not work. I can automate the level line, but the fade handles are ineffective.

Voyager Legend will not work with my laptop

I have an HP Pavilion dv6-3120us Entertainment Notebook PC with Windows 7(64-bit). I recently purchased a new bluetooth headset and am unable to get it to work with my laptop. The Previous headset was a Plantronics Voyager Pro which worked great with my laptop, all I had to do was pair it and that was that. My new headset is the Plantronics Voyager Legend and after pairing, it starts installing drivers and all but one are fine.
Bluetooth AV Ready to use
Bluetooth Remote Control Ready to use
Bluetooth AV Remote Control Target Ready to use
Bluetooth Peripheral Device No Driver Found
Bluetooth Hands-free Ready to use
I've uninstalled, reinstalled several times and it didn't help, It shows that the device is paired, but doesn't reroute audio to the headset or the microphone. It shows in audio devices but says disconnected, when I click on 'connect', nothing happens and 'set as default' is grayed out and I cannot select it. I know that there is a separate bluetooth USB adapter available, but I'm using the headset mostly for my phone (which works fine) and occasionally my laptop so I don't really want to purchase it. I've already contacted Plantronics about the issue and this was their response:
"Thank you for contacting Plantronics Technical Support.
If you are using built in blue tooth and not our blue tooth USB adapter unfortunately we cannot assist you with your built in blue tooth, Plantronics does not supply drivers, here is our statement with regards to using built in blue tooth:
If you are pairing the headset directly to your computer, the drivers that are required are for your computer's internal Bluetooth adapter. You will need the drivers supplied by your computer's manufacturer in order for you to use your Bluetooth headset as an audio device.
Different computer manufacturers and computer models will use different internal Bluetooth adapters, so you'll have to contact your computer manufacturer to get those drivers. Most major computer manufacturers have a "Drivers" or "Drivers and Downloads" page on their web site in which you can enter your computer model in order to retrieve available drivers. You can typically find the Bluetooth drivers under the "Network" category. "
I've checked for bluetooth driver updates and it says that none are available, I've also uninstalled and reinstalled the bluetooth drivers from the laptop. Sorry that this is a short novel, but I wanted to make sure to give all available details, any help or advice would be welcome. Thank you in advance.

Hi Nt_winters,
Thank you for all the information, it is very useful. I understand you are having an issue with HP Pavilion dv6-3120us Notebook with Windows 7 and your new Plantronics Voyager Legend. In the device manager are all unknown devices removed as well as the Bluetooth devices for the headset? Broadcom is recommended for Plantronics Voyager Legend headsets. Here is a link to that driver.
Hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Agents not working in the upgraded OBIEE 11G

Hi All,
Recently we hae upgraded our BI Suite(10.1.3.4.1) to 11G(11.1.1.5.0)
We are able to see all of our ibots(Agents) in the new 11G instance and I have added new recipients, set the schedule for the seedding cache.
But when I try to run the Agent (Start Immediately), Agent ending up with a warning Invalid subscribers skipped
Even we have configured the email setup(SMTP) in the enterprise manager and we are able to receive the mail attachments.
But our goal is to add the usernames in the recipients tab and set the seeding cache option for the specified users.
How can we achieve this in OBIEE 11G
Any help would be much apprecialted....
Thanks
Praveen Chandu.

Hello Everyone,
The write back feature is working fine. There was an issue privilege setting in rpd.
Now one field is getting editable while pressing Update button in the dashboard report and type new value and pressing Apply button, data is getting updated in to DB table.
To aviod the manual entry i want to enter a value from some kind of dropdown or any choice box. So could you please let me know how can i achieve this functionality.
Thanks in advance.
Regards
Niraj

Chart view is not working in obiee11.1.1.5.0

Hi,
All types of chart views are not working(analysis compunt layout) in obiee11.1.1.5.0 version.please refer my below scren short
http://imageshack.us/photo/my-images/209/chatnotworkingobiee1111.jpg/
note:
1) no luck below link
OBIEE 11g - Cannot view charts
2) some of the servers working fine. after deployed skin some times making this kind of problem
Thanks
Deva
Edited by: Devarasu on Apr 4, 2012 10:51 AM
Edited by: Devarasu on Apr 4, 2012 11:20 AM

Hi,
Its reolved. our sking and style dvn files not yed updated earliear...after updated and restarted its working fine.
thanks
Deva

If statement within a view is not working correctly ?

Hi all,
maybe i am wrong but i think the if statement within a view is not working correctly. See code down below.
I would like to use the Hallo World depending on the page attribute isFrame with or without all the neccessary html tags. Therefore i have embedded the htmlb tags in an if statement. But for any reason if isframe is initial it isn't working. It would be great if anybody could help me.
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if not isframe is initial. %>
<htmlb:content design="design2003">
     <htmlb:page title = "Top Level Navigation view">
<% endif. %>
hallo world
<% if not isframe is initial. %>
     </htmlb:page>
</htmlb:content>
<% endif. %>
thanks in advance and best regards
Matthias Hlubek

Matthias,
The short answer: your example is <b>NOT</b> going to work. The long answer will probably 5 pages to describe. So first let me rewrite the example so that it could work, and then give a short version of the long answer. Do not be disappointed if it is not totally clear. It is rather complicated. (See the nice form of IF statements that are possible since 620.)
<%@page language="abap"%>
<%@extension name="htmlb" prefix="htmlb"%>
<% if isframe is <b>NOT</b> initial. %>
<htmlb:content design="design2003">
<htmlb:page title = "Top Level Navigation view">
    hallo world
</htmlb:page>
</htmlb:content>
<% else. %>
hallo world
<% endif. %>
So why does your example not work? Let us start with a simple tag:
<htmlb:page title = "Top Level Navigation view">
</htmlb:page>
Now, for each tag, we have effectively the opening part (<htmlb:page>), an optional body, and then the closing part (</htmlb:page>). We are now at the level of the BSP runtime processing one tag. What the runtime does not know, is whether the tag wants to process its body or not. Each tag can decide dynamically at runtime whether the body should be processed. So the BSP compiler generates the following code:
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
ENDIF.
tag->DO_AT_END( ).
You should actually just debug your BSP code at ABAP level, and then you will immediately see all of this. Now, let us mix in your example with our code generation. First you simplified example:
<% if isframe is NOT initial. %>
<htmlb:page title = "Top Level Navigation view">
<% endif. %>
<% if isframe is NOT initial. %>
</htmlb:page>
<% endif. %>
And then with our generated code. Look specifically at how the IF/ENDIF blocks suddenly match!
if isframe is NOT initial.
DATA: tag TYPE REF TO cl_htmlb_page.
CREATE OBJECT tag.
tag->title = 'Top Level Navigation view'.
IF tag->DO_AT_BEGINNING( ) = CONTINUE.
endif.
if isframe is NOT initial.
ENDIF.
tag->DO_AT_END( ).
endif.
You can see that your ENDIF statements are closing IF blocks generated by the BSP compiler. Such a nesting will not work. This is a very short form of the problem, there are a number of variations, and different types of the same problem.
The only way to solve this problem, is probably to put the body into a page fragment and include it like I did above with the duplicate HelloWorld strings. But this duplicates source code. Better is to put body onto a view, that can be processed as required.
brian

Help viewer does not work after update to 10.4.4

Since updating to 10.4.4 my Help viewer does not work, and all of the troubleshooting fixes suggested in other threads have not had any success in resolving this. I've noted that when I go to Users>Library>Documentation>Help there is no mac.help file - can someone tell me if that means that I've lost the file altogether and need to reinstall it? I get to the first screen of the viewer, but the links from there don't work. Thanks for any help that you can provide!

Thanks for your suggestion. I downloaded OnyX and ran the cleaning function. After restarting, I opened Help and once again the first screen appeared fine. But again most of the links did not work, though those under the "What's New" heading did work. I might add that I had previously tried a variety of suggestions posted in another thread, which included deleting from the caches folder in Home>Library several files such as com.apple.helpui and help.plist in the Preferences folder. (As noted in my previous post this evening, I also created another user but that also did not have any effect.) Any other ideas? Thanks

Since iOS 4.2.1 Update - Document viewer Apps do not work right!

Before I updated to iOS 4.2.1 Air Sharing (Document Viewer) was working (so were all my Document Viewers), but currently, they do not work correctly. I have checked about three others...all have the following problems:
Since I updated (to iOS 4.2.1), all the documents open up to FULL SCREEN mode (which it had never done before, since the very beginning of the AppStore). Full Screen mode means that it looks like a Word Document on the computer, with the margins showing. This is rediculous for the screen of an iPhone or iPod Touch. There is no need to see the margins. Also, the font size is so small that it makes it almost impossible for most people without a magnifying glass. The document used to open up to a "zoomed in" view of the text. This allows the person using the application to actually read the text. This also allowed scrolling up and down easily. Now, with the new Full Screen view, to get the text large enough to see, you have to double tap (or spread your fingers on the screen to scale it big enough) on the text to read it. Then, when you scroll up and down, it sometimes scrolls side to side or diagonally (into the white margins), making reading cumbersome.
The other problem with the new view is that the font sizes are all messed up. The normal font (whether 9 pt. to 16 pt.) looks the same. The italic font looks bigger than the normal font, though it is the same point size. It skews the page and alters what the original documents looks like.
I have contacted the developer of Air Sharing to complain, but he said the following:
Hello,
Thank you for the test file. I do see what you're referring to. We use Apple's built-in Office viewer for Air Sharing. This means to display files like .docx ones, we use Apple's viewer. It's possible they changed their viewer in the most recent iOS update to cause this change. Because it's not our viewer we have no control over how it displays such files. Other apps using Apple's viewer will encounter the same issue. I wish there was more we could do on our end to help resolve this problem.
Cheers,
Elliot Chase
Avatron Software, Inc.
Please tell someone to fix this situation. I can provide you with information (and screen shots of before and after) to back up all my complaints. Thank you for listening.

Ah, so that could be a good search term.
Things get a bit more weird though. I was looking through the commands in the drop down menu and saw under "Archive" this: "Put/Send the Apps you bought to this computer" (rough translateion in English) So I tried that out.
I could only do that by going to "Store" and (**** how to say that in English) "Allow" this computer to do that. This is weird as this is the same computer that I have always used for anything to do with the iPhone! I have now 2 computers that are allowed to sync, and it is one machine. Beats me!
At a certain point the transfer proces stopped again and again I was requested to "empower" this computer again, as out of the 65 apps now 21 were not allowed to be transfered! That did not work. It now keeps telling me that I have 2 computers allowed for transferring apps and these last 21 can not be put in the library.
I am a bit at my wits end!
But really thanks for trying to help out! It seems that 4.2.1 has some real problems when reading through the discussions!
Cheers!

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work. The QuickTime components necessary to view, edit, import and export various types of films are not installed. The components included in the iMovie installer. R

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

I get this error when I go to imovie, I have instalerat on via appstore, but it does not work.
The QuickTime components necessary to view, edit, import and export varioustypes of films are not installed. The components included in the iMovie installer.Reinstalling iMovie.

In portal BookMark and save view are not working

we already published the web application via iView in our portal.
What I am looking for is to bookmark an already published web application within EP portal. E.g. I open the web application with specific filter and make some drills. Now I want to bookmark this report situation and save the generated url under my favorites.
For me this is not working. When I click the bookmark option noting happened. My address bar url also not changed; no bookmark URL was created.
Save view also is not working
Please help ......

Hi SKM,
did u solve your problem?
Greetingz
Lars

IBM cognos TM1 Executive viewer is not working on direct Access

Hi,
We are implementing DirectAccess in our environment and testing applications in test lab. It has been observed that executive viewer is not working on Direct Access but working fine over VPN mobile checkpoint. When DA client click on open view button it
gives error
" Additional information:
Unable to connect to server XYZ.com using TCP-IP port 7112. Please make sure that IBM cognos TM1 executive viewer server is started and the port is not blocked by any proxy server or firewall"
but from client telnet is working on port 7112. All ports between DA server and application server are open 3389,7112 and 80.
Also select database option is grayed out and user is unable to select the database. When switching to VPN its working fine.
We are using Executive viewer 9.4.
Any help would be appreciated.

It sounds like this program may not be capable of talking over IPv6, which DirectAccess uses. First make sure that when you connect it is trying to talk to a hostname and not an IPv4 address. If your program is calling for "192.168.1.100" - this is never
going to work over DirectAccess. It must call for a name that DirectAccess can resolve to an IPv6 address for communication over DA.
If you confirm it is talking to a name, and then if you confirm that you can do other things to that same name (can you RDP into the server for example?), then that confirms that DirectAccess traffic flow is working to that name/server.
If RDP works but the application still doesn't work, then the application is probably incapable of IPv6. You can either ask IBM if they have a newer version that does talk IPv6, otherwise I have a utility available that can intercept packets from these kinds
of problematic applications and flip the packets into IPv6 on the DA client. Let me know if you need any further information on that: http://www.ivonetworks.com/news/2013/05/ivo-networks-announces-app46-for-directaccess/

Urgent : SSRS reports zoom in option is not working in IE9 compatability view

Hi,
We have SSRS reports which when viewed in IE 9 compatability view, zoom in option is not working properly.
SSRS report have 4 charts inside a rectangle. when zoom in from 100% to 50% only rectangle shrinkes not the charts.
Please let me know why it is happening and solutions if any?
Rakesh Jayaram http://blogs.msdn.com/b/rakesh_ramblings/

Hi Wendy Fu,
Thanks for your support. Below are the steps and screenshots as per your requirement.
/*******************Below are the steps to replicate ************************/
This document explain IE9 compatibility issue with SSRS report (SSRS 2008 R2 and IE9)
Tools and software used:
Reports are rendered on Share Point 2010 server which uses SSRS 2008 R2.
Reports are accessed using web browser IE9, IE10 ….
Problem statement:
To work OTHER reports compatibility mode in IE should be ON
To work SSRS reports (mainly zoom) compatibility mode in IE should be OFF
OTHER report is being used by customer and they will start using SSRS reports as well. While using both OTHER reports and SSRS reports customer do not prefer to keep switching between compatibility modes.
“Browser Mode: IE9”
Steps to reproduce Zoom issue for SSRS report with Compatibility mode is given below:
Step-1: Select Tools menu -> Compatibility View Settings
Below setting is suggested for OTHER users so tick as shown below,
Step-2: On decision center select link and Open the report home page and click the link to open the report.
Step-3: On SSRS reports Change Zoom level from 100% to say 50%. Here all charts are not moved with container frame.
If “Browser Mode: IE8” is set with following steps then this issue does not happen.
Press F12 and from and select IE8 as shown below.
Press F12 again so this will set the mode and then try Zoom option it works fine. However this setting temporary and will remain for the session only.
If compatibility mode is OFF then also this does not happen. Please see image below.
Rakesh Jayaram http://blogs.msdn.com/b/rakesh_ramblings/

Validation-code of a view is not working in portal

my validation code is working fine when testing in local view's application. the same view is attached to portal through fpm. while testing the same view in srm portal it is not working.can anybody suggest me why it is happening so. i will be thankful.

have you checked in debugging.....

Cascading Dynamic Parameters Do Not Work In Crystal Viewer 2008?

I have generated a report with Crystal Reports 2008 that uses a dynamic cascading parameter. I work in waste management and the report I create in Crystal is used as a "template" with the tonnages collected from all of our customers. Our less technically minded employees can then open this report with Crystal Reports Viewer 2008, use the drop down menus to select only the customer they need a report for and then export this to PDF for delivery.
The report as designed works perfectly in Crystal Reports, but the parameter does not work in Crystal Viewer.
Some of our customers have more than one physical location that we service. The cascading dynamic parameter in my report allows you to select the customer name, and then it only shows the locations linked to that customer, so the end user can select only the relevant location(s) for the report. The cascading parameter is dynamic and allows multiple selections, and is linked to a Saved Data formula. The report is saved with the data.
When the report is opened in Viewer, one of two things happens. If the report is saved in Crystal Reports and a specific customer/location is selected, then ONLY those selected customer/locations are available in the Viewer. If ALL the customers/locations are selected in Crystal Reports and saved, then in the Viewer they are all available, but selecting one customer does NOT narrow down the locations (i.e. it does not "cascade") and instead ALL of the locations are available even if they do not apply to the customer.
If I use a single dynamic parameter and select ALL of the customers (for example), then when this is opened in Crystal Viewer all of the customers are available from the parameters drop down and the report works fine. As soon as this is tried with a cascading parameter however, Crystal Viewer falls down.
Does anyone know of a workaround to this or if there is something I am doing wrong?

I am using the free Crystal Report 2008 Viewer along with designing reports with Crytal Reports ver 12.3. With a test file from SAP called "Interactive Parameters", the parameter feature works to refresh the report. The parameters that are supplied in the sample report work with Viewer. They show up under the parameter list in the parameter side panel in Viewer and are available to make record selections. When I add a parameter to the sample report in Crystal 2008 and then view the report in Viewer, my parameters are unavalable for record selection while the original parameters remain available. Futher, my parameters are displayed under a section called "Current Data Set" in the Parameter side panel, while the selectable parameters are displayed under the "Parameter" section in the parameter side panel. There must be a setting that is treating the parameters I create differently form the parameters created in the original sample report. Any help would be appreciated.

ITunes album view not working and no album art?

Hi all -
Bought a 64GB iPhone 5 and uploaded my music via my desktop - all seems to have run fine, except that album artwork isn't showing for many of them, even when I select the option "View artwork".
I've read on another thread that ID3 tags of 2.3 or lower are not supported, but find it hard to accept there's no compatibility here - so am presuming user error rather than Apple trying to force users to manually update all their albums (I have 57GB of music - don't want to update album art on everything!)
Also, I've just downloaded and installed iTunes on my laptop, and connected the iPhone to laptop. However, the album view options aren't working. All songs are simply listed by album name, but none of the column listing features work either (ie, sort by name, genre, etc).
I presumed iTunes had crashed, but restarting the laptop and the same happens. Am on latest software for iTunes and iOS 6.
One more curiosity - how do I download my music from the iPhone to the desktop? I had presumed it would do this automatically (ie, into the iTunes media folder) but so far nothing.
Or is it simply the case that iTunes is preparing to download all music into the desktop, hence why it's not working properly? Simply because there's no notice of anything happening.
Apologies for any newbie questions - found myself using the iPad quite a lot for apps, but never for music as it was only the 16GB version, so have been sold into joining the Apple walled garden. Would be nice to get these issues sorted out, though.

Hi David
Yes, I found the importer now. I also fixed my problem, but with 'brute force':
For each of the folders not being indexed, including the ~/Library/Mail folder, I turned on Privacy in the Spotlight System Prefs and then turned it off again. This seems to have fixed things. I did this for some old document folders too and that also seems to have worked.
So far so good. thanks again. For now I'm marking this as solved.

Legend View Not Working in Compound view OBIEE 10.1.3.4.1

Similar Messages

Maybe you are looking for