Lenovo A6000 RAM management observations

Hi lenovo,
I have made few observations which i believe are issues and need to fixed by lenovo.
I have been using Lenovo A6000 since a week and noticed the following.
1. Initially the RAM on first boot was around 460 MB.
2. After using it for 2 days, i observed the RAM was around 50-100mb free.
3. When i play a game and pause it and go to home and again when i open it, the games starts from the beginning but not from where i paused it.  This is not the case with apps.
4. Sometimes the apps like Skype, Ucbrowser does not get installed on the SD card and displays message as " Unable to install on the location"
5. When i set pattern Unlock, i have to press a bit hard at the points to get it unlocked.
6. The RAM sometime shows very low(50- 100 MB free) and sometimes show around 400mb free.
There is a problem with RAM algorithm for sure.
I have updated the phone to the latest update available.

Also sometimes
1. autorotate gets activated automatically.
2. Audio profiles changes to outdoor automatically.

Similar Messages

  • Lenovo A6000 - Power manager app

    Hi,
    Recently, Our friends bought more number of Lenovo A6000 mobiles.
    We checked the power manger app is missing in the application list.
    Existing power manager will support on A6000? If yes, Please share the link.
    In android phone, It must be needed app. We tried with third party app in playstore. it's not good so far.
    So, I request lenovo team to give a power manger app support to the lenovo A6000 series. it will be helpful.
    Or, Plesae suggest the best power saver app.

    Thanks jakas.
    It's working fine.
    Also, Pls update if you found any other app which is great power saver.

  • Failure of Contact manager on updating of lenovo A6000

    After updating my Lenovo A6000 to Craft-A6000-m_S021_150616, Am receiving text messages on failure of the contact manager. Please Advice

    ORA-19506: failed to create sequential file, name="b9n2a0hi_1_1", parms=""
    ORA-27028: skgfqcre: sbtbackup returned error
    ORA-19511: Error received from media manager layer, error text:
    MMS-3158: tina_stream ended prematurelyYou don't have a RMAN problem, you have a tape storage system problem. TINA logfiles should show, why the backuppiece can't be created. RMAN is the victim,not the culprit.
    I'm not familiar with TINA, so I don't know whether all parameters are valid, this should also be checked.
    Werner

  • Lenovo A6000 very low ram

    I am facing very low ram issues. even after clearing ram by default ram cleaner I only get 110-115 mb ram. 
    I also donot recieve real time whatsapp notifications but i am receiving gmail notifications even after clearing ram.

    when i first time boot my lenovo A6000 i had around 400mb ram free, then after 3days of reguler usage now i have only 50 to 100mb ram free.
    when i kill all apps by deafault kill app it shows between 180 to 250mb ram free but again after 10-15sec it shows between 50 to 100mb ram free.
    i also updated my device current version  - Kraft-A6000_S029_150212.
    ram is very low beacuase of this vibe ui ?
    please lenovo solve this low ram issue.
    Moderator comment: Please don't create new threads regarding the same issue/question as it splinters the discussion.

  • Lenovo A6000- Failure of Contact Manager on Update

    After updating my Lenovo A6000 to Craft-A6000-m_S021_150616, Am receiving tect messages on failure of the contact manager. Please Advice

    Hi,  I found there are other issue apart from contact manager crash issue after upgrade from Jelly bean to KitKat 1. in the same way google chrome is also crashing after trying to open gmail and start enetering username2. caller name is not displaying while getting incoming or outgoing calls3. I found some suggestion in the same community website that first take a backup, delete all the contacts, and them import it back to solve the issue. But why we need to do these, why this issue is happening after upgrade4. however I deleted contacts and tried export from the storage. While doing so, Contacts->Menu->Import/Export contacts->Import from storage, it finds and displays all the .vcf files. Very good, but there is no select button to 'select all' the vcf file to import to the address book. I don't want to sit and select each .vcf file from the list to import it as there hundreds of contacts. I think 'select all' option is missing after upgrade.  I heard, in kitkat version some performance issue is fixed but now it seems to be many basic functionality features are not working after upgrading.  We are all waiting for your response and good kitkat upgrade notification in our mobile.  Thanks,Sharath

  • Heating issue lenovo a6000 plus

    What is the normal temperature of A6000 Plus ??

    Hi,i have observed the same issue with my Lenovo A6000 Plus.I inserted memory card (7GB was full out of 8GB) loaded with images, songs, videos etc.Phone started heating up badly just like heater when i launch gallery app to check images & videos. but it failed to load images.Then i checked music app to play some sound tracks. i faced the same i.e. songs did not get fetch from SD card.I went in battery settings to check what application is consuming battery.  i found that "Mediaserver" application is consuming battery above 70%. Same SD card i inserted in other phones like Motorola. there it works smoothly without any heating issue.I guess lenovo team should fix this problem because eventhough we insert formated SD card, one day it will get full and will face this problem in future too.

  • One suggestion! for Lenovo A6000 Plus!

    When i press the left sensor of my Lenovo A6000 Plus phone,the "desktop manager" is comes up which is not very useful. Is there any option to alter the setting to view "Recent App View" while pressing the left sensor?? It takes more time to hold that left sensor in order to get the "Recent App View" which is quite irritating as well as time taking!
    So lenovo if this modification setting is not included with the phone itself then can you please add this option at your next software updates. Thnak you!

    Unfortunately, there is no fix for this Flipkart denied to take this mobile back.The only hope is next lollipop update will fix it.. Sadly, another thing LENOVO removed many developer options. The transition scale, animation scale etc are not found

  • Hi Guys i have uninstalled the games which are pre installed in lenovo a6000

    Hi Guys,
    Please help me with these, is there any way that i can get back my pre installed apps back. i have uninstalled few games in lenovo a6000 and i have not rooted my phone and i dont have any backup for those. In this case can i get back those. If yes can you please help me how to get back.
    Solved!
    Go to Solution.

    Hi sasi4urs,
    The only way to restore the preloaded apps is to do a factory restore. Alternatively you can download it via PlayStore.
    Thanks.
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • Disappoint​ing camera of lenovo a6000

    Same picture clicked multiple times and result is a piece of crap, each n everytime same picture most of time blurred .it seems the camera app having some kind of focussing problem.
    Since i am also using sony Ericsson phone with 5 mp at back is superior than what lenovo a6000's 8mp.

    the shots r hit n miss mostly miss

  • Poor RAM management in Photoshop CS4 - need help!

    I have done numerous hours of research over the years only to give up and come back to this subject later on. I will try again!
    I must ask: is there ANY way to get Photoshop CS4 to automatically flush used RAM after closing image files? I'm tired and annoyed of CS4 eating more and more RAM without freeing anything after an image has been closed. An image shouldn't still eat up memory when it isn't even open anymore. It seems to be terrible RAM management of the program itself and how Adobe has forgotten to write that little snippit of code to clear the RAM after an image has been closed.
    I know this is not because of:
    Cache levels
    Setting too large of a saved history state; purging history cache or any kind of cache still never frees RAM
    A lack of updates; I have been up to date with CS4 very punctually as they were released
    The computer I am on; this poor RAM management has been around since CS2 and it's the same on the last 4 computers I have used
    Does CS5 still do this too?

    Your historically conditioned to believe software apps should swap data a standard way. The way your using the system is probably not the most effective processing for your workflow.
    -  I have hundreds of TIFFS that take 60-120MB each in processing, and 8gb  of RAM. The more total RAM actually usable that I can use the better.  How the heck can using less of what is actually available RAM enhance my  workflow? Standard are standards for a reason. The ink industry for  printing is non-standardized and people waste $3-5 billion+ a year only  increasing on unused ink that is still remaining in their cartridges, because there is no standard way of manufacturing ink, filling cartridges, or monitoring how much ink is actually left in a cartridge. I'd love for more standards in more markets. Unless natively stable, all other programs on my computer work flawlessly with said demonized traditional methods and standards, even in high bandwidth applications a hell of a lot more intensive than  Photoshop CS4 will EVER be. Currently people keep disregarding the fact that in my situation CS DOESNT FREE THE RAM.  CS4 is balloon. Balloon inflate. Never deflate even when emptied. Overflow into other rooms of critical OS space where balloon shouldn't be when it fill the room full. How many analogies must I give? Must I use sign language? Binary?
    You don’t have enough experience with these topics. This is actually a
    true statement. Most companies with systems large and small have to
    think about what it costs to process specific jobs. If one in a thousand
    jobs swap, a decision must be made to know how much it would cost to
    retrofit a very expensive environment to keep that one job swap from
    occurring. Most times it is better to let the swap happen for this
    non-mission critical item than pay $50,000 to upgrade all systems.
    I said NON EMERGENCY SITUATIONS.  Emergencies are once in a while. You're repeating what I said like a parrot, but in different longer sentences with more words telling me I don't get what I'm talkinga bout. You're missing the full picture of what I am actually saying. That 1 in 1000 overflow would be exactly true in my situation with 7GB used, but it's not. Why not? Because the CS4 balloon will not deflate itself or reuse the empty space inside the balloon when it's needed, and the OS isn't given back any of the empty space to work with to know it doesn't need to page anything. In turn CS4 is going to try and scratch too when the OS is telling it that is has no more RAM left when indeed it does, but its hiding it in its own reserve balloon from itself. If a company needed just 700MB more room and either they spend $50k to upgrade to that, or get CS4 to release some space once in awhile, they'd sure as hell bother Adobe or write their own mod to force CS4 to release unused allocated RAM to get it.
    Self inflicted only because I want to push the limit of what is actually usable on my machine, not some 'safe zone' with high tolerance. My system is tuned for a fine line of performance and I know what it can hande. I know what it uses and it does not spike usage for random OS operations. It can handle 7GB to 7.2GB of RAM of freely used RAM to one active program if it needs that big of a workspace to work. If CS4 isn't going to reuse the hollow areas in that balloon, then that's not my fault. My OS can handle the fine tuning, and CS4 is what cannot, obviously, since it can see that much RAM but not use the last %10 correctly.

  • Lenovo A6000 keeps rebooting after upgrading to Kraft-A6000_S029_150212

    I just updated my new Lenovo A6000 smartphone to Kraft-A6000_S029_150212 version. Since then, it is continuously rebooting. It comes up, stays for 5 seconds, UI hangs and then reboots.Need urgent help on how to recover.With great difficulty, was able to switch off the phone as it wasn't giving me enough time to power off. The continuous booting up sound was irritating people sitting nearby and I wasn't even able to turn off that sound.

    Will check with service centre and update here. FYI - I had received the phone on 13-Feb-2015 and as soon as i switched it on, it prompted for a software upgrade. So I upgraded (over WiFi) with whatever was the latest software version available at that time. After that upgrade also, the phone used to automatically reboot atleast 3-4 times a day randomly. I thought that could be a bug in that version and to take care of that, I upgraded to the latest version this morning only to end up in constant reboot mode. So not sure if this could be a manufacturing defect too. Thanks.

  • A question about Manage Observer by Grid Control

    Hello everybody
    My Enviroment:
    Primary Database:
    Single Instance 11.1.0.7
    S.O.: SLES 10 SP2 x86_64
    Standby Database:
    Single Instance
    S.O.: SLES 10 SP2 x86_64
    Observer:
    Oracle Client Administrator 11gR1 x86_64
    S.O.: SLES 10 SP2 x86_64
    Reading Oracle Documentation, I found at Oracle Data Guard Documentation that I have to install the full Oracle Database 10g software kit to manage observer by Enterprise Manager.
    My question is I have to install Oracle Database 10g Software to manage observer by Oracle Grid Control 11g??
    Thanks a lot

    user12100209 wrote:
    Thanks CKPT for awnsering.
    Yes I know that I have to deploy Observer at diferent server.
    So I don't have to install Oracle Database Software to manage Observer by Grid Control 11g. That 's was looking for.
    Thanks a lot.May be here small confusion. I mean to say of course you have to install ORACLE_HOME(client) but no need to install/push from GRID.
    You can perform installation at system level instead from GRID. Hope this clears.

  • How to disable Vibrate on typing on lenovo a6000?

    Hi. Please help me on how to disable vibration on typing on my lenovo A6000. Thankyou.

    Let the keyboard pop then long press the "," button it will show you Google keyboard settings. Enter settings
    Then go to prefrences and unchecked the vibrate on keypress option then device won't vibrate when u keypress

  • Lenovo A6000 displaying all contats as unknown(Not even displaying Caller's Phone Number in details)

    Hi guys,
    I recently bought a lenovo A6000 smartphone. Whenever i receive a call it is not showing any Caller ID details(not even Caller's Phone number). It is showing as Unknown caller and in details there is no information regarding phone number.
    Can somebody please help me in fixing this issue.
    Thanking you in advance.

    It looks to me that itsTalkTalk you should be annoyed with, someone moving into an adjacent flat, so the address will be very similar, calls whoever they want to use, you seem to think it's BT but don't say why you think it's BT, and says they want service, the customer service rep incorrectly identifies your mothers flat and says there is already a line in the flat, do you want to take it over, they obviously said yes, this is what generated the letter from TT, and when you called them they should have rejected the takeover and the whole job would have been cancelled, this obviously didn't happen. The line in the exchange is swapped over, that's why for a short period your mother had another number on the line, confirmed by the fact you got a call from another number , called it back and your mother answered, and she got a call on that number from someone calling their own mother, but yours answered... The person from the other flat reports a fault, line not working, it never could work as the order was a takeover not a provide, Openreach send an engineer who moves the physical cable pair from your mothers flat to the other persons flat to give them service, because they have a valid account and your mother no longer has. TT should have followed your instruction when you said you hadn't asked for the line to be taken over, and presumably the new 'neighbour' should have taken more care when calling their provider with the address, and shouldn't have said yes to taking over an existing line when they couldn't have been sure there was a line in their flat. Its not much help, but these things happen in multi occupancy residences, especially when someone doesn't know if a line exists where they are moving to, and who the service provider with that line is. Even if you are correct and the new neighbour with your mothers 'line' is with BT, they are unlikely to be able to do anything for a TT customer, it's up to TT to sort this out for you and your mother.

  • Ram Management Problem.

    I have a Mid 2012 12-inch MacBook Pro running 10.7.5 with a serious ram problem. I work in a research lab and use my computer to run a lot of memory heavy software, so I maxed out my mac with 16GB last winter. It has worked beautifully since installation, but recently I've run into some trouble. About a week ago I changed the name of my home directory following instructions on this forum, and ever since, my 16gb of ram has been terribly mismanged and nearly always consumed. I only have this broswer open with one tab and no other applications running and this what my memory usage looks like.
    I've been using the purge command in terminal to help manage this problem, but with 16 gigs I shouldn't have a RAM problem. Once I have my typical slew of applications open my memory gets maxed out and the Page outs start logging up (This only started a week ago). Is it possible something with my RAM managment was messed up when my home directory was renamed? Does anyone have any suggestions of how I can find the root of this problem and trouble shoot it?

    Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
    This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
    Step 1
    If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
    Triple-click the following line on this page to select it. Copy the selected text to the Clipboard (command-C):
    { sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
    Step 2 (optional)
    Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
    Boot into Recovery. When the OS X Utilities screen appears, select
    Utilities ▹ Terminal
    from the menu bar. A Terminal window will open.
    In the Terminal window, type this:
    res
    Press the tab key. The partial command you typed will automatically be completed to this:
    resetpassword
    Press return. A Reset Password window will open. You’re not  going to reset a password.
    Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select
     ▹ Restart
    from the menu bar.

Maybe you are looking for