Lenovo - Drivers and software - ThinkPad T61, T61p web page
Hello,
not sure who is actually in charge of this web page:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67853
but it would be greatly appreciated if it was kept up-to-dated
many thanks
T61p - 15.4" - T7700 - FX 570M 256MB - 4GB RAM - ST916023AS - 4965AGN - BT - FPR - 9 cell - Vista Ult. x86
T21p - 14" - PIII 850MHz - S3 Savage/IX 8MB - 512MB RAM - 100GB 7200rpm - WinXP x86
abarbieri wrote:
Hello,
not sure who is actually in charge of this web page:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67853
but it would be greatly appreciated if it was kept up-to-dated
many thanks
What exactly do youmean? Please explain.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog
Similar Messages
-
There are a lot of drivers and software listed for my T500 on the Lenovo website but the explanation about what they do is very weak. Can I get that info anywhere? I recently updated my system from Win 7 32 bit to 64 bit and some of my drivers had to be replaced (fn+ function key and Ultranav Touchpad to name two). In the process of finding those, I found all the others. Should I consider updating all the listed drivers that are appropriate for my T500 and Win 7 64 bit operating system? Thanks.
DaveInstall the lenovo update utility and it should get all the ones you need
-
Many drivers and software for T530 are still 32-bit, despite being offered for 64-bit operating systems.
lenssd9 wrote:
Many drivers and software for T530 are still 32-bit, despite being offered for 64-bit operating systems.
Which drivers are you looking for?
I took a quick look through the T530 page, and didn't see any that were 32-bit only.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество -
Hi, how to use touch pad (thinkPad T61) to scroll pages up/down, left/right? do I need any drivers?
Hi daneeo, and welcome to the Lenovo User Community!
In the Control Panel for your Mouse there should be an UltraNav tab. Under that tab are all the settings for the touchpad. Check to make sure scrolling is enabled.
If you do not see an UltraNav tab in the Mouse Control Panel, download and install the UltraNav driver and utility:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66898
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67226
Hope this helps!
I don't work for Lenovo. I'm a crazy volunteer! -
After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try againHi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem
-
Audigy 4 - Vista drivers and software urgently nee
you know... i have this sound card (Audigy 4 - non pro) for over one year now, AND i don`t have a good driver and software for windows vista home premium x64. last driver for this sound card is:
. Creative Sound Blaster Audigy series Vista Driver 2.2.0002 (38.30 MB) 6 Mar 07.
i mean... 6 mar. 07
how long do i have to wait for you, to relase all the software it is on windows xp oh, this audigy 4 was not intended to use with vista, wright and you want everybody to buy that x-fi sound card with another set of problems in windows vista. nice marketing solution. good for you ONLY.
i`m just tired waiting. my card doesn`t work as it should, nor as it worked in windows xp.
i need all that software. all of it, working under vista. PRONTO!
you will provide that software, or you just lost me as a customer, and along with me, alot more.
btw, daniel_k was only helping people, by providing drivers and software YOU couldn`t, or you just didn`t wanted to. stop deleting his posts or links to the drivers made by him.
just stop that abbusi've marketing strategy, by not releasing software for older sound cards, and forcing customers to buy your new products. no, that wouldn`t happend.http://forums.creative.com/showthread.php?
-
Drivers and software Hp deskjet 2050 j510a All-in-wonder for Windows 8 Pro x64
Hi,
from when I update my system with Windows 8 Pro I can' t use the printer Hp Deskjet 2050 J510a.
I downloaded the latest version of drivers and software for Windows 8 Pro 64 bit:
DJ2050_J510_Basicx64_1313.exe
The application give me at the and of installation the message:
"installation not completed"
and in details I can see:
"Installation error. Operative system not supported. This software can be installed only in Windows XP, Vista, Seven. Change operative system or install the printer in another computer."
The printer as been recognized from the system, and in panel control I can see it, but when I print any page the printer make only half print and than show me a message of " not original or used printer cartridges, press OK to continue or cancel do delate the print" but the print cannot be completed untill the end.
Cartridges are original; I tested the the printer too in an another computer with different operative system: the printer work correctly.
Thanks for your attentionHello kamran554,
I understand you are looking for the driver to download for your Deskjet 2050 J510a for Windows 8 64bit.
I have located the correct driver for you to download below.
Please click the link to download and install.
HP Deskjet Full Feature Software and Drivers
Good luck to you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
Which drivers and software do I download?
I was told I should only download drivers and software updates from the manufactures website.. which would be hp.. so I went to the software and drivers download page and after entering my product information it gave me a list of downloads which was
Driver - Audio (1)
Driver - Graphics (2)
Driver - Keyboard, Mouse and Input Devices (2)
Driver - Network (3)
Driver - Storage (1)
BIOS (1)
Diagnostic (1)
Order Recovery Media - CD/DVD/USB (1)
Software - Multimedia (5)
Software - Solutions (1)
Utility - Tools (3)
So how do I know which ones I need or do I need to download all of them? I have a compaq cq58 and just want to make sure I keep my laptop up to date!Several ways to check if you have the version listed or an older version. For drivers use Device Manager.Right click each device,such as Audio, choose Properties.You can check the version of the driver and compare it to the description in the file on your software/driver page. Or just use the option on your sofware/driver page to let HP do a Scan to check your versions against what is new.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Drivers and Software will not work on new hard drive
Hello:
Pavilion DV7-4270us
Windows 7 64 bit
I installed new 500 GB hard drive into the above referenced notebook, as previously installed 640 GB hard drive from factory began to fail.
I have downloaded drivers and software for HP Media Smart, HP Simple Pass Fingerprint Reader, and HP Power Manager from HP Download page, and none of these work.
HP Support Assistant was downloaded and it works, however it says no updates needed.
Is this because I installed a hard drive not purchased from HP?
Thank you for any help you could provide.No the laptop does not care where you bought the hard drive. Do you have any devices that are not working right in the Device Manager?
-
After doing a Google search, I click on a link and go to the searched web page. When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out". Any idea what is going on with the browser?
Type '''about:config''' in the Location (address) bar and press the "Enter" key. When you see a warning, click '''I'll be careful, I promise!''' button.
* Preferences that have been modified are shown as '''bold (user set)'''.
* Preferences can be '''Reset to the default''' or changed via the right-click context menu.
-> In the '''Filter bar''', type '''browser.sessionhistory.max_entries'''
* Right click the preference '''browser.sessionhistory.max_entries''' and click '''Modify'''
* Change value from 0 to whatever you want over 0 (Default value is 50)
* click OK
-> Close the '''about:config''' tab and then Restart Firefox.
See this post:
* https://support.mozilla.com/en-US/questions/860894#answer-229574
Check and tell if its working. -
Well, i was on my laptop now and all of a sudden a pop up message appeared and said "your download is complete" so i went to go check it out and it was 'MacProtector'. i cant delete it and it keeps opening unwanted web pages, please help me sort this out someone?
Refer to: http://cantalktech.com/2011/05/08/mac-protector/.
-
I've installed the new safari and it didnt load any web pages
i've installed the new safari and it didnt load any web pages and i dont knw wut to do thank and pleas help as quick as possible
Hello,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
Let us know after that what happens. -
Turning off headers and footers when printing a web page.
Is it possible to turn off (or reduce the size of) the
default header and footer
when printing a web page? I am using Internet Explorer 6.0.2
900, and only want
it to work with my computer and a specific printer.
I am using the directive @page normal { size : portrait;
margin : 0;} in a CSS
stylesheet specified as media="print".
ClancyOn Sat, 19 Jan 2008, David Powers wrote
>However, you are very selective in your quote. Michael
goes on to say
>(and I agree with him on this point):
>
>"The problem with logical inches and all other fixed
units of measure
>is that they do not scale well on systems with different
dot-per-inch
>settings. What may seem just right in Windows at 96 dpi
may be too
>large or too small on other systems.
Of course, but It's not a problem with logical inches per se.
The
logical inch is just another way of looking at what is meant
by the
screen dpi value. Scaling problems, with different dpi
settings, has
always been a Windows problem and results from the way that
the OS
handles scaling. Fonts scale perfectly. Actual windows, and
other
containers, don't. This is a problem programmers have
grappled with
since the first Windows OS. Vista is the first OS to try to
tackle this
problem.
>Thus, percentages or ems work best when cross-platform
compatibility is
>desired."
And that is because the users screen dpi, and hence logical
inches, are
totally irrelevant when specifying ems and percentages.
Ems and percentage equate to a number of pixels, not inches.
The sole purpose of screen dpi setting is to convert anything
sized in
physical inches into a number of screen pixels. That is the
_only_
purpose of screen dpi. It's a very simple algorithm.
(physical) inches x screen dpi value = number of pixels
How do _you_ think a font sized in points (inches) gets
translated to a
specific number of pixels on screen. I'd be interested in
your answer.
For the screen a conversion from physical inches to pixels is
always
necessary because, as you say, pixels are the unit of screen
measurement
but they are not just a "standard" measurement, they are the
only
consistent measurement. It's not the users program that
creates pixels
on screen but the Operating System. The program requests the
OS to
create a given font at a given size and the requested size
_must_ be in
pixels. Windows can't _directly_ create a screen font that's
specified
in points (inches) because it has no notion of what a
physical inch is
on screen. It does know what a logical inch is because the a
logical
inch is defined by the screen dpi value. That's what the
screen dpi
value is for. If a browser programmer wants to bypass the
variability of
screen dpi on different computers then they ignore dpi values
and work
directly in pixels i.e. in ems or percentage. When ems and
percentages
are specified one is dealing only in pixels.
> It makes a lot more sense in terms of website design to
set a
>font-size of 14px than use units that both you and
Michael Bowers
>define as "1/72 of a logical inch".
Of course it makes more sense to set font size specifically
in pixels
because that's the only unit the OS can use to put something
on screen.
I can't see where you get the idea that either Michael Bowers
or I have
said that there is a unit "defined as 1/72 of a logical
inch". Every
Windows program written takes it that there are 72 points to
a
_physical_ inch.
>
>Yes, you *can* use points to set font sizes (or any other
measurement)
>in CSS for onscreen display, but your fixation with
logical inches
>appears to add little of practical value to choosing the
most
>appropriate measures for designing pages to be viewed on
displays of
>various sizes and resolutions.
You are implying I've said things which I haven't. I have
never, at any
time, said one should use points or inches in designing web
pages. You
seem to have missed the point that what I am doing is
explaining why you
see the results you do on screen when those unit are used.
Somewhat more
informed than "Points are only for print because I don't know
what they
mean on screen, so they must be meaningless".
>As Eric Meyer says on page 110 of "Cascading Style
Sheets: The
>Definitive Guide" (2nd Edition), "points can be a very
difficult
>measurement to use in document design."
And again, I've never advocated using them in page design. A
close
reading, however, from page 83 onwards shows that Eric Meyer
has an
imperfect notion of the meaning of screen dpi. Heresy!! He's
hardly
alone, which is why I did a web site.
>
>That's why I recommend leaving points for use in print
style sheets.
>However, if you enjoy making life difficult for yourself
by using
>points for onscreen design, you're perfectly free to do
so.
Once again, I have never advocated that. You are setting up a
straw man
to knock down. You can do better than that.
Richard Mason
http://www.emdpi.com -
Using Windows XP and Firefox 3.6.15 web pages print with some of the script as unintelligible weird looking script or maybe some kind of computer script. This problem also occurs with the web page on which this question is submitted. This doe not occur using IE 8.0 with the same printer.
These have nothing to do with Firefox.
C:\ProgramData\FLEXnet\Connect
\11\ISUSPM.exe
and
C:\Users\Vinegarhill-User Acc\Desktop\Malware Removal Programs\eXplorer.exe
This one - C:\Users\Vinegarhill-User Acc\AppData\Roaming\Mozilla\Firefox\Profiles\ak4dv58c.default\extensions\ \components\afom.exe - is probably the '''AFOM - Memory Recovery & Retention For Firefox Only''' extension.
https://addons.mozilla.org/en-US/firefox/addon/11922/
My advice is to uninstall that extension. IMO, you have too many extensions installed, and are asking for problems with Firefox. I am not against using a lot of extensions in Firefox ''(I typically have 45 to 50 extensions installed, but the mix of extensions you have scares me as potentially problematic.)'' -
Embedding WebI and Crystal reports on a web page
Hi,
I'm new to BO, so please bear with me. I've also posted this to the .NET-side, so sorry if you've seen this post before.
We have a project where we will need to embed WebI and Crystal reports on a web page, i.e. we want the people who access the web page to get the reports (mainly graphs) as embedded content on the web page without any controls and other clutter.
Is this possible and what's the correct way of doing this?
Thanks,
CarlHi,
Thanks for the help!
We still face the original problem, though. I.e. with openDocoument we get the report, controls, tab selections, scroll bars etc. What we actually would like is to get just the contents of a report.
Is there any way of doing it? We're not afraid of coding, we have good developers. Or do we need to schedule report creation to some format (e.g. PDF) and then load the PDF to the web page?
Basicaly it's more important to get this working for WebI reports as we can redo almost all reports from Crystal to WebI. Of course we are happy to find a resolution for both cases.
Br,
Carl-Gustaf
Maybe you are looking for
-
How to get the plugin filename in which the script is written?
Hello. I am looking for the name of the file in which a plugin script is written. I need to get this filename to put it into a property in the dataportal when the plugin executes. And I need the name to update if the file containing the plugin script
-
Delete graphic in InDesign CS5 js
After placing all the corner logos where I need them, occasionally I need to delete original logo. It lets me to delete the graphic, but not the frame: myLogo.remove(); myCornerFrame.remove(); The first line works and the second one doesn't. Thank y
-
Delivery has been locked, cant unlock it
Hi, I have been programmatically locking and unlocking deliveries with the standard deque and enqueue function modules. Suddenly my program got hung and i had terminate the session with Ctrl + Alt + Del After i logged in again i again chose the o
-
I know this has to be posted somewhere but have been able to find a solution for my problem. My form is finished and everything works great, however when I open it in adobe reader to test it, my cursor does not show in the first box which I would lik
-
How do you I get my iPad to have the same cell phone as my phone?
Under FaceTime and IMessage where it said to be reached at I want my cell phone number there how do I change number?