After doing a Google search, I click on a link and go to the searched web page. When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out". Any idea what is going on with the browser?

Type '''about:config''' in the Location (address) bar and press the "Enter" key. When you see a warning, click '''I'll be careful, I promise!''' button.
* Preferences that have been modified are shown as '''bold (user set)'''.
* Preferences can be '''Reset to the default''' or changed via the right-click context menu.
-> In the '''Filter bar''', type '''browser.sessionhistory.max_entries'''
* Right click the preference '''browser.sessionhistory.max_entries''' and click '''Modify'''
* Change value from 0 to whatever you want over 0 (Default value is 50)
* click OK
-> Close the '''about:config''' tab and then Restart Firefox.
See this post:
* https://support.mozilla.com/en-US/questions/860894#answer-229574
Check and tell if its working.

Similar Messages

I have 102 movies on my iTunes. When I access my library on Apple TV, it only shows 27 movies. Any ideas what is going on, or how I can resolve issue?

I restarted computer (PC) and all of my Apple TVs (3), and it still only shows 27 movies. I don't know if these movies are in my iCloud, but they are the same movies for all the Apple TVs.

I ran into this problem this morning, and after spending an hour trying to figure out what the heck happened after the 6.0 upgrade, I finally figured out my problem.
Check the, "Home Videos" category via your Apple TV. I have no idea why this happened after the upgrade, but my videos and playlist now show up in the "Home Videos" category.

What is going on with the Iphone4 home button. I see lots of people having issues, but not resolution. I am running 4.2, but based on what I have read, 4.3 does not help. Apple has to do something about this, as it is affecting lots of people.

What is going on with the Iphone4 home button locking up? I see lots of people having issues with the button becoming unresponsive, but no resolution.
Suggestions include:
Upgrade
Restrore
ReSync
Push harder,
etc.
I am running 4.2, but based on what I have read, 4.3 does not help. Apple has to do something about this, as it is affecting a large portion of the user community.

lfossier1 wrote:
Apple has to do something about this, as it is affecting a large portion of the user community.
No they do not and no it is not affecting a large portion of the user community.
If it is an actual hardware issue, the only fix is to repair or replace the hardware.
If it is a software issue, restoring as new will fix it.

I get unable to process your request when trying to download new episode of a tv show. Any ideas what is going on?

Got my email saying my new episode was avaiable for download.
I clicked on it.
I got "unable to process your request. try later"
What's going on?

The plot thicktens!
I was able to go to Purchased page, click on cloud and am downloading episode: that's good. I've had to do this in the past once or twice, too.
Here's what NOT to do: DON'T go to the iTunes page of the TV show you have a season pass for to download the episode from there. I think that's what I did several months ago for an episode of a different show I'd subscribed to. I found when I got to the page for the show there was no indication there that I had purchased the season. None of the "purchase" tabs on the right side of the screen said "Downloaded." Well, I really wanted the episode and didn't want to wait (can't remember if I'd tried my purchased page or not). Once I downloaded the episode ~ which I was charged for, even though I'd purchased a season pass ~ I ended up with two locations in my iTunes TV shows page. So, I have two thumbnails for the same show: one says "Season 4" and the other says "Season 2~4." I asked apple support about fixing it and they sent me a (for me) long, tedius list of instructions to follow which I never did.
Last night, my episode wasn't in my Purchased page (i.e. I couldn't download it from the cloud) so I went to the iTunes store page for the TV show. I have, contradictorily, been able to download from there, too, in the past, when my email link hasn't worked... even though, as advised above, sometimes it doesn't work. Last night, I got the same indication that iTunes had NO idea that I had purchased a season of the show. Under the large pic in the upper left corner of the page it still says "buy season pass" and none of the payment tabs on the right of each episode indicate that I've purchased any. However, I have 18 purchased episodes of the season in my library and I downloaded them by receiving an email from iTunes alerting me that a new episode was ready for download.
Downloading from the cloud is the way to do it, if you can.

I used to send photos from my Lumix Tz-40 camera directly to my iPad using the cameras WIFI. Since I installed IOS7 the connection no longer works. Anyone got any ideas. I have already installed the latest version of Panasonic's Image App (1.7.1)

I used to send photos from my Lumix Tz-40 camera directly to my iPad using the camera's WIFI. It was all working well until I installed IOS7. The connection no longer works. The camera still keeps the iPad in its connection history. The camera's wifi network still appears when I select a WiFi network from the iPad but the Wifi status icon never appears on the iPad. So the connection is never made.
Anyone got any ideas. I have already installed the latest version of Panasonic's Image App (1.7.1)

Hi there,
You're running an old version of Safari. Before troubleshooting, try updating it to the latest version: 6.0. You can do this by clicking the Apple logo in the top left, then clicking Software update.
You can also update to the latest version of OS X, 10.8 Mountain Lion, from the Mac App Store for $19.99, which will automatically install Safari 6 as well, but this isn't essential, only reccomended.
Thanks, let me know if the update helps,
Nathan

Ipod nano 3rd Gen no longer shows in iTunes devices, any ideas?

This ipod operates fine but when I connected it to iTunes (latest version) on my iMac it doesn't register as a device so I can't sync etc. Connecting an iPad DOES show up in iTunes devices.
The above problem appeared in Ox Snow Leopard and in just installed Mountain Lion.
Any help would be much appreciated

The latest version of iTunes may hide the sidebar. To show the sidebar, from the menu bar, under View, select Show Sidebar.
With the sidebar visible, does your iPod appear in the sidebar, under DEVICES?

TS3276 My gmail or icloud mailbox has no incoming mail, showing that the mailboxes are connected but nothing coming in, mailbox rebuild option is greyed out. any ideas?

My mail has suddenly stopped receiving any incoming mail, I have gmail and of course icloud but nothing coming in or going out. I've ran the connection doctor and it's showing that the connection to the internet is fine, so where is the mail?
Cannot rebuild mailbox as the option is greyed out...any ideas?
I can access my gmail via the internet so posts will be seen.
thanks, any advice will be welcome as i'm at a loss.

I've ran the connection doctor and it's showing that the connection to the internet is fine
What about the connections to the mail servers?

Anything that I copy on my desktop gets deleted automatically after a few seconds. Any idea what is going on ?

I have a problem with my MBP.
One day something weird started happening. Every time I would copy / save / download something on my desktop it got deleted automatically after a few seconds. On very very rare occasions this would not happen.
This has been going on for 3 months now and I haven't found any sollution. The last option is to format and reinstall Lion but I hope there is a faster/better solution than that.
I have a 2011 15-inch MBP with the up-to-date Mac OS X Lion.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software -- potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions -- they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are four lines of text in monospaced type, which are UNIX shell commands. They’re harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of running these commands, search this site for other discussions in which they’ve been used without any report of ill effects.
Some of the commands will line-wrap in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
To begin, launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search. A text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Copy or drag -- do not type -- the line below into the Terminal window, then press return:
kextstat -kl | awk ' !/com\.apple/ { print $6 $7 } '
Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.)
Step 2
Repeat with this line:
sudo launchctl list | sed 1d | awk ' !/0x|apple|com\.vix|edu\.|org\./ { print $3 } '
This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
Step 3
launchctl list | sed 1d | awk ' !/0x|apple|edu\.|org\./ { print $3 } '
Step 4
ls -1A {,/}Library/{Ad,Compon,Ex,Fram,In,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Sta}* 2> /dev/null
Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, change it to something like “[email protected]” before posting.
Remember, steps 1-4 are all drag-and-drop or copy-and-paste, whichever you prefer -- no typing, except your password.
You can then quit Terminal.

Changing date (and sequence) of events by changing dates of photos no longer seems to work. Any idea what to do?

I am scanning in old slides and negatives (from the 1960s and 70s), and I want to get the resulting "events" in sequence from when the photos were taken, rather than when they were scanned. So I have been changing the dates of the photos, and previously this resulted in the associated event moving to the proper sequence. This definitely worked a month or so ago, both with prints scanned in on a flat-bed scanner, and also with slides and negatives scanned with a Veho scanner. That was faulty, however, and so it has been replaced with a Plustek 7500i scanner, using SilverFast scanning software, and importing the resulting images into iPhoto. I have recently tried to change the dates of the resulting events, and it doesn't seem to work as it used to. There has been an update to iPhoto 9.1.3 since my earlier success.
Take for example one event, CS73A. Hovering over the event in the "All events" display gives dates of 1 Apr 2011 to 2 Apr 2011; these are the dates the slides were scanned in. If I open the event and choose the Info tab, it gives the event date as 02/03/1973 (which is the approximate date that I changed it to). I had done a batch change on the event this time, so the date and time on the first slide is 2 March 1973 09:30:48. Each successive slide is 1 minute later, and the last is 2 March 1973 10:08:48 (38 slides). I asked for the dates in the files to be changed as well.
I don't know what I'm doing that's different from before. The only things I can think of are (a) something has changed in the iPhoto update, or (b) the SilverFast software stores the scanning date in some part of the EXIF that iPhoto can read but not change. I don't have tools to examine the EXIF unfortunately.
What to do?

Chris, I have run into the same problem.
Try this:
Open an event with more than one photo in it.
Adjust the date of one or more photos. The event date does not update.
Delete any one photo. The event date now updates to match the above date change.
Undo the delete photo. The event date stays matching.
Change the date of any photo again. The event date updates now every time.
If you close the event and reopen it, you have to start over with the delete one photo thing.
I don't understand it but it works here.
I also have had the problem of events not sorting themselves in order of the dates when VIEW, SORT, BY DATE is selected. This seems to affect only the events were photo date changes had been made. Using the delete thing seems to keep the events in order.
Another funny thing: When I put photos into iMovie the times in iMovie show as 7 hours off the photo time.
I think Apple owes us an update to iLife!

Any idea what this errorr means? the data type of the reference does not match the data type of the variable

I am using Veristand 2014, Scan Engine and EtherCat Custom Device. I have not had this error before, but I was trying to deploy my System Definition File (run) to the Target (cRio 9024 with 6 modules) and it failed. It wouldn't even try to communicate with the target. I get the 'connection refused' error.
I created a new Veristand project
I added the Scan Engine and EtherCat custom device.
I changed the IP address and auto-detected my modules
i noticed tat Veristand didn't find one of my modules that was there earlier. (this week)
So, i went to NiMax to make sure software was installed and even reinstalled Scan Engine and Veristand just to make sure.
Now, it finds the module, but when i go to deploy it getsto the last step of deploying the code to the target, and then it fails.
Any thoughts?
Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Preparing to synchronize with targets...
• Querying the active System Definition file from the targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.
• Start Date: 4/10/2015 11:48 AM
• Loading System Definition file: C:\Users\Public\Documents\National Instruments\NI VeriStand 2014\Projects\testChassis\testChassis.nivssdf
• Preparing to deploy the System Definition to the targets...
• Compiling the System Definition file...
• Initializing TCP subsystem...
• Starting TCP Loops...
• Connection established with target Controller.
• Sending reset command to all targets...
• Preparing to deploy files to the targets...
• Starting download for target Controller...
• Opening FTP session to IP 10.12.0.48...
• Processing Action on Deploy VIs...
• Setting target scan rate to 10000 (uSec)... Done.
• Gathering target dependency files...
• Downloading testChassis.nivssdf [92 kB] (file 1 of 4)
• Downloading testChassis_Controller.nivsdat [204 kB] (file 2 of 4)
• Downloading CalibrationData.nivscal [0 kB] (file 3 of 4)
• Downloading testChassis_Controller.nivsparam [0 kB] (file 4 of 4)
• Closing FTP session...
• Files successfully deployed to the targets.
• Starting deployment group 1...
The VeriStand Gateway encountered an error while deploying the System Definition file.
Details:
Error -66212 occurred at Project Window.lvlibroject Window.vi >> Project Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
Possible reason(s):
LabVIEW: The data type of the reference does not match the data type of the variable.
=========================
NI VeriStand: NI VeriStand Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
• Sending reset command to all targets...
• Stopping TCP loops.
Waiting for TCP loops to shut down...
• TCP loops shut down successfully.
• Unloading System Definition file...
• Connection with target Controller has been lost.

Can you deploy if you only have the two 9401 modules in the chassis (no other modules) and in the sysdef? I meant to ask if you could attach your system definition file to the forum post so we can see it as well (sorry for the confusion).
Are you using any of the specialty configurations for the 9401 modules? (ex: counter, PWM, quadrature, etc)
You will probably want to post this on the support page for the Scan Engine/EtherCAT Custom Device: https://decibel.ni.com/content/thread/8671
Custom devices aren't officially supported by NI, so technical questions and issues are handled on the above page.
Kevin W.
Applications Engineer
National Instruments

I am having problems with mail after upgrading to snow leopard. When I send an email to somebody, I would get a reply from them but the content of the reply were old emails from months ago. Any ideas what's going on?

For ex. The subject of my email was "List of kids dancing this weekend". Then i would compose my email and send it to the recepient. They responded to my email with the same subject "List of kids dancing this weekend" but the content of the email was the email I received from somebody else months ago. This "phenomenon" happened serveral times already. Please help!

Check this post out
http://hints.macworld.com/article.php?story=20110516152604993
Turns out the auto-complete database is a SQLite DB stored in this folder. Probably the ownership and/or permissions are messed up on your system. Mine (under Snow Leopard) show ownership by me and rw privilege for all files in that directory, including MailRecents....

When I click on run to start my download of itunes a box from internet explorer pops up and says "The connection to the server was reset." Any idea what's going on?

In attempting to install itunes on a laptop I keep encountering a problem with internet explorer. When I click on run a box pops up and says, "The connection from the server was reset." I don't know how to get past this.

Use a different browser.

I want to know what is going on with the photo attachments. Since the first 7 upgrade my photo attachments no longer work. Is there something I need to do to make them work?

Just want to know why my photo attachments for my iPhone and iPad no longer work since the first 7 upgrade. Is it something I'm doing? How do I get them to work?

Just want to know why my photo attachments for my iPhone and iPad no longer work since the first 7 upgrade. Is it something I'm doing? How do I get them to work?

HT1481 I have an ipod shuffle which i need to reset as i can not sinc it on my laptop which is using windows 8, but when i open itunes i d not have the 'source panel' on the left hand side which should show up my ipod. any ideas what i need to do? please

Hi I have an ipod shuffle which worked well on my old pc but since i have tried to link it with my new laptop I cant get it to sinc. I have athorised the device to my laptop so i thought it maybe worth resetting it but all the info I have read tells me that to reset my ipod i need to open i tunes and on the left hand side in the 'source panel' i will find my ipod listed but when i open itunes i do not have a source panel so i cant reset it. i have spent days trying to get this problem sorted and am about to throw the thing away. I have tried to manually sinc the thing, i have installed and reinstalled the latest version of itunes, i have restarted my laptop but i dont know what to do next. any help would be very much appreciated. Many thanks in advance

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Does anyone know what is going on with the standalone LR 6 I loose it everytime I close down program or turn machine off, I have installed it 6 times already, says CC does not work, however its downloaded as well as 8.0 manager

I need some assistace to what is up with LR 6 standalone with free CC loose program everytime program is shut down or machine is turned off, says CC is not working,

I need some assistace to what is up with LR 6 standalone with free CC loose program everytime program is shut down or machine is turned off, says CC is not working,

After doing a Google search, I click on a link and go to the searched web page. When I go back to the Google page using the back button the links I originally clicked on no longer show as "greyed out". Any idea what is going on with the browser?

Similar Messages

Maybe you are looking for