Lenovo Yoga Tab 2 1051L. Bluetooth keyboard not working after WIN 10 upgrade

Hello, Today upgradet my Lenovo Yoga Tab 2 1051L from win 8.1 to win 10 and bluetooth keyboard is not detecting any more. 1. Does any one already upgradet to win 10 on LeonovoYoga Tab 2 to win 10 ?2. Is anyone having similar issue ?3. Any suggestion at this point ? Thank you in advance!

I have yet to upgrade on my 1051.
Looks like Lenovo uploaded new drivers for windows 10.
http://support.lenovo.com/us/en/products/tablets/yoga-series/yoga-tablet-2-1051
Have you update to these drivers?
Looks like there is a bios update as well.
Side note:
I have upgraded to 10 on another tablet(stream 7)
Once everything was updated and I gave it time to settle in I had no issues.

Similar Messages

Bluetooth keyboard not working after 10.7.2 update

Just got around to installing the 10.7.2 update this morning, and afterwards could not connect my Apple bluetooth keyboard. I've also had some difficulty with my Apple mightymouse (yes, it's old, but I love it). I tried restarting with the keyboard and mouse off and trying to re-connect using the Bluetooth preferences, both SMC reset and PRAM reset, repairing disk permissions, and all of the suggestions on this thread: https://discussions.apple.com/message/16377827#16377827
So far nothing has worked. My mouse began working again after the initial restart with both bluetooth devices off, but the keyboard isn't being detected in either the Keyboard setup or the Bluetooth setup assistance. The keyboard, however, was detected by my iPad, and was working with this computer before the update. I've made sure that the bluetooth on my iPad is off so as not to confuse it, and it's still not working.

Well, I found a solution. After removing the bluetooth preferences as directed in this article (which didn't help me, but might somoeone else): http://ismashphone.com/2011/08/how-to-fix-bluetooth-pairing-in-mac-os-x-lion-iss ues.html
There was a software update that fixed this. Thank goodness. So if like me you're just getting around to doing the update, after the big 10.7.2 one, check software update again. I assumed it would be all rolled in to the same update, but that was not the case.

Bluetooth keyboard not working after sleep *windows8* FIX

Its pretty simple actually. It might not work for you, but let me know if it does. Untill bootcamp drivers are updated, I found that disabling the Bluetooth Network adater under Networking And Sharing in the control panel will allow my Keyboard to function again after waking up. If you find that your keyboard is still paired, but not responding when your Windows 8 install wakes up after sleep, this might fix the problem for now.
If you have a notebook, I read on another forum that if you enable Bluetooth Collaboration under the device settings in Device Manager, you can fix this issue also. Google for it if your interested.

I've noticed on mine that if it is coming out of Ssafe Sleep (you can see the progress bar at the bottom of the screen if it is) then the keyboard does take a bit to active.
This may not be your problem however just be sure you've been patient enough after waking.

Bluetooth Keyboard not working on iMac after upgrading to 10.10.3

I upgraded to Yosemite 10.10.3 and my bluetooth keyboard stopped working after a while. iMac (Late 2012) sees it but don't want to pair. You can see it on screenshot (never mind Russian interface).
I tried everything:
a) resetting PRAM
b) resetting SMC
c) turning bluetooth on/off
d) changing assumes in keyboard
etc, etc...
Nothing helps. Can somebody help?

HI Michelle
i have the same problem Also using an iMac21 inch late 2012. Has been working perfectly until 10.10.3. Now when the iMac wakes from sleep neither the mouse or keyboard are connected. The only recourse is to force a hard restart with the power button.
i have tried all your above items and also to no avail. I have set sleep to wait indefinitely & that has resolved my issue. Albeit with an increase in energy use.
I Would be grateful if anybody had some tips on how to resolve this situation.
thanks
paul

T40 KEYBOARD NOT WORKING AFTER STARTUP

IBM THINKPAD LAPTOP
T40 237372M
OS WINDOWS XP PRO SP3
•86 key keyboard with imbedded numeric keypad and
integrated UltraNav dual-pointing system, featuring TrackPoint and customized touch pad
SUBJECT; KEYBOARD NOT WORKING
AFTER STARTUP UNABLE TO OPEN SOFTWARE OR USE TEXT IN NOTEPAD AND OPENOFFICE
I HAVE A TEMPORARY SOLUTION TO OVERCOME THIS PROBLEM BY;
1 )USING MOUSE OPEN START/ THEN NOTEPAD
STILL UNABLE TO ENTER TEXT
2) OPEN START/ONSCREEN KEYBOARD CLICK ON LOCK THEN EXIT
3)GO BACK TO NOTEPAD ENTER TEXT, NOW WORKING I THEN EXIT
WITHOUT SAVING
I TRIED REINSTALLING XP AND LOST MS WORD THAT IS WHY I AM USING OPEN OFFICE
I THOUGHT IT MAY HAVE BEEN THE SP3 UPDATE BUT AFTER USING IBM SYS REINSTALL
DURING RE INSTALL I WAS UNABLE TO USE TEXT FOR WINDOWS LOGIN
THE ONLY KEYS TO USE WERE ÁÉÍÓÚ BEING LATIN CHARACTERS WITH ACUTE SIGN
CAN ANYONE CAN HELP ME THANKS

Hi and welcome to the forum!
Does the keyboard work fine inside the BIOS?
Also try booting from LiveCD of Ubuntu, if issue remains then the keyboard is faulty.
Keep us informed.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

When apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
Do a reset
restore with back up and if required as new

My outgoing mail is not working after the upgrade OS to mavericks. my mail client version is 7.1 . please help me resolve this issue

My outgoing mail is not working after the upgrade OS to the mavericks. my mail client version is 7.1 . please help me out resolve this issue

Please let me know , How we can reinstall apple mail ? .
1 . We updated OS to mavericks few machine in last december and still does't works SMTP (Out going mail) on those MAC.
2. After that most recently we updated OS to mavericks few machine those are working will with SMTP server .
a)Not showing any SMTP connection in TCP trace ,
b) Connection docter every time Says "Connecting to the server "
3, Then we have installed thunderberd (another mail) client on maverick os, which OS related to apple mail client not woking . It seems other mail client is working well with SMTP server .
Please help me .
Thanks,
Ranesh..

Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

@ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
@ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!)
@ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack. i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot.
Thanks fo rall yor help!

The MSS ECM FPM Steps are not working after the upgrade

Hi all,
The MSS ECM FPM Steps are not working after the upgrade. We use Java Webdynpro and MSS ECM (SP17), version 603.
On cliking the FPM steps, nothing is happening, however we can navigate using the buttons.
But this functionality was working before the upgrade.
Please let me know what should I do.
Thanks,
Sarayoodharan.K

clinet provided in the backend system was not correct during SSO certificate using tx-code strustsso2 - Cleint should be 000

TX2500Z touchscreen does not work after Windows7 upgrade from HP specific to S/N, etc on laptop.

My TX2500Z touchscreen does not work after I upgraded to Windows 7. I cannot find any support or drivers, etc. to fix. I bought Windows 7 directly from HP specific to my P/N and S/N on my TX2500Z. Any help? Thanks.

after 2,5 days (spending half a day within the apple shop as well with this problem) i have it all back on track.
i did a lot of different things: trying to remove and reinstall iPhoto; did a SL installation over the old SL I had on my HD; backing up all the data of course before and reformatting my HD and installing a new clean SL version on it + a new clean version of iLife9 with all the updates and than I migrate with migrate assistant all the data and setting with time machine back onto it, but all this didn't work, because it also migrated the error/bug through time machine with it.
so at the end i just installed a brand new, clean SL version on my hard drive, than I did the updates and put all my data, photos, docs, movies, mail, bookmarks, music, etc manual back into the system (drag and drop from my external HD, where i had an exact copy of my internal HD) and did all the settings again in all the different programs.
the only thing i used migrant assistant with time machine for was for the programs. it seems to work now all fine and i even got more free space on my HD, because some of the old stuff i always carried with me but i never used, i didn't take over.
basically everything is clean now. At least i hope and works fine. touch wood!

Why is Time machine backup not working after Mavericks upgrade?

Why is Time machine backup not working after Mavericks upgrade?

I had the same problem due to the Fire Wire port. Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device. I find it strange that as soon as I installed Mavericks. The drive does work using USB. It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

Re: Safari 7.0 zoom not working after Mavericks upgrade.

Re: Safari 7.0 zoom not working after Mavericks upgrade.

Hey there sarunelis,
It sounds like after updating to 10.9 the zoom function is not functioning at all. It sounds like you may need to check for 3rd party plugins. This article will help you check for that.
Safari: Unsupported third-party add-ons may cause Safari to unexpectedly quit or have performance issues
http://support.apple.com/kb/ts3230
Thank you for using Apple Support Communities.
Regards,
Sterling

Amd video drivers not working after win 10 upgrade

AMD video drivers not working after win 10 install. running on microsoft basic driver, call hp smartfriend assistance. appearently there is a fix but hp will not help unless i pay 100.00$ US because the warranty has expired on my notebook.Have a pavilion dv7 was running AMD Mobility Radeon HD5000 series. Thank you hp will not be purchasing an hp product again. Alienware here i come.

Not much we can do since your model is not supported by Toshiba for Win 10 upgrade according to THIS list so there is no Win 10 driver for your TouchPad. That button, however, is not the only way to disable/enable the TouchPad. FN+F9 does it and you can fix it where, when you plug in an external mouse, it will automatically be disabled.

Bluetooth keyboard not working.....power light flashes

Hi everyone,
My iMac bluetooth keyboard stopped working on the weekend. The green light adjacent the keyboard's power switch started flashing rather than staying on. I replaced the batteries but that didn't seem to help. My bluetooth mouse is working fine. Has this happened to anyone?
Cheers,
Jeremy

Yes it has happened to me. Just added it to my long list of repairs. Do you have Applecare? In July, I had to have the logic board replaced. After the tech installed it, wham!!! Power supply was gone. Then it was the hard drive 3 weeks ago, after a few hundred bucks to get everything backed up then Lo-and-behold the keyboard over the last weekend. I called apple and then ran thru a few things. Like have you checked the batteries, try toggleing the on switch, unplug and replug it back in. After 10 minutes, the rep said "I can send you a new one." So if you do have Apple care, call and get a new keyboard. I just hope it is the keyboard and not the bluetooth.

Bluetooth Mighty Mouse and Keyboard not working in Win XP!

Hi All,
I simply cannot get my Bluetooth Mighty Mouse and Keyboard to work in Win XP via Bootcamp! The bluetooth icon appears in the tray and even shows that they are connected but they do nothing at all. One thing to note is that they show up as connected but with no password. Could this be the problem? If I reconnected the two with new passcodes for XP, would they still work when I reboot in OSX?

upgrading to vista sorted things out!

Lenovo Yoga Tab 2 1051L. Bluetooth keyboard not working after WIN 10 upgrade

Similar Messages

Maybe you are looking for