Lens profiles not available in Lightroom CC

I have downloaded and installed lens profiles but they do not show in Lightroom CC as choices in the drop down menu? They were there for Lightroom 4 but not since I purchased and installed Lightroom 5 via the Creative Cloud?

I have downloaded lens profiles in an analogous folder on my computer and they work ok, so you're putting them in the right place, assuming you're logged in as user Michael.
The other thing is are the photos you're opening RAW or non-RAW, and is the lens-profile you're hoping to use for RAW or non-RAW, and is it for the same camera manufacturer (Canon, Nikon, etc) as your photos?

Similar Messages

Lens Profiles not working in Lightroom 5.4?

I've got OSX 10.9.2, Lightroom 5.4, latest Camera raw, everything up to date.
When I "Enable Profile Corrections" for an image shot with a Sony a7r and Sony FE 55mm lens, it should automatically retrieve this profile:
/Library/Application Support/Adobe/CameraRaw/LensProfiles/1.0/Sony/SONY (Sony FE 55mm F1.8 ZA) - RAW.lcp
Well, it doesn't. The only Sony lens available in Lightroom's Lens Correction panel is "Sony DT 18-200mm." But there are several dozen Sony lense profiles in the "Sony" directory.
And more puzzling, the camera "Make" menu lists 8 manufacturers (Apple, Canon, DJI, GoPro, Nikon, Sigma, Sony, Tamron) but leaves out a number of others — Fujifilm, Hasselblad, Leica, Mamiya, etc.
And as with Sony, only one Tamron lens is listed.
I've tried re-installing Lightroom fresh, and no luck.
Photoshop works fine and has all the lens profiles.
Anyone else noticing this? Got a fix?
Irked in Cambridge,
Mike

I only shoot in RAW, and I am having this same issue. I shoot Nikon with a Tokina lens. This morning, Tuesday October 14, 2014, I had this setting. I closed the program and restarted it, and now I only have Apple, Canon, DJI, GoPro, Nikon, Sigma, Sony, Tamron lens profiles. There was not an update, nor did I actually change any settings. What is going on here?
I talked to customer support, whom suggested that I was stoned out of my mind because these profiles do not exist in lightroom. I did as the rep asked, followed the link and downloaded the "new" profile. Now I can't get it installed. Meanwhile, my photos are waiting for me to edit them. Can someone please help out here?!

Correct Lens Profile Not Available for Exported/Imported Image Files

Any help with this would be appreciated. I just noticed yesterday that when I have RAW (DNG) files in my LR5.2 library, I can select the correct lens profile to apply. When I take three of those files and merge them together in Photomatix Pro they come back as a single TIFF file. Now LR only has one lens profile available, and it is the wrong one.
This is happening with my Sony NEX-7 and Tamron 18-200mm f/3.5-6.3 XR DI-III VC. With the RAW files, I have a list of Tamron lenses from which to choose, and the correct one is available. For the merged TIFF file, however, only a single Tamron lens is available for selection, and it is not the lens I used.
If anyone has any ideas about this and can get me past it, I would greatly appreciate it.
Thanks,
~Steve

Here's my workflow for this particular situation: After importing the original RAW files, I apply lens correction using the correct profile. I export to another application that creates a new (TIFF) file that comes back into LR. Even though I already applied the correction to the original files, I can see that there is a difference in distortion between the original files and the new TIFF.
If your other application is opening the Raw file directly, it will likely be disregarding either most, or all, Lightroom adjustments even if they are somehow communicated to it. It will come down to whatever independent Raw support is built into the other application.
The other application would still need to (a) "understand" about Adobe lens profiles etc, (b) "know" where to find the appropriate Adobe profile on disk, and (c) be equipped to do the specific and proprietary processing that they refer to. The same applies for all the other Adobe-proprietary processing instructions. The only software I am aware of which can do all this reliably, in partnership with LR, is Adobe Camera Raw plus Photoshop.
I've trained myself that whenever a new file is created in an application outside of LR (including PS), I always re-apply lens correction upon first returning to LR. If I'm interpreting the above responses correctly, I shouldn't need to re-apply lens correction if I applied it to the original files. But again, it's not my observation that this is the case.
If your particular workflow is failing to reflect the first application of lens corrections (as well as perhaps, other specific adjustments) - then what returns to LR will not have undergone those kinds of corrections yet.
I'm also hearing that I may need to download a lens profile for this lens for a TIFF file format. I've never needed to do that before, so perhaps I'll give that a shot.
As I understand it, Photomatix can also accept converted TIFFs or JPGs from LR - instead of Raw fles. I am skeptical that you will realise any "clear water" advantage from sending Raws rather than TIFF (or even, high quality JPG in many cases) from LR into Photomatix - assuming the LR conversion is already optimising the images for the required purpose. You would be doing that step in an interactive environment rather than blindly via a generic converter. Such intermediate bitmaps are in my experience perfectly good candidates for HDR processing, or for exposure fusion (which I prefer - though I don't use Photomatix in particular).
Any workflow which causes LR to in effect Export suitable bitmaps that incorporate all current adjustments, will embody lens corrections as part of that. By the way, the workflow into Photoshop HDR is similarly done by way of converted bitmaps - though in that case it is ACR rather than LR which achieves these converted bitmaps, and into memory rather than into separately saved files, but the outcome is effectively the same.
The only downside is the "cleanup" is to get rid of intermediate TIFFS or JPGs afterwards. I usually put the completed "merged" image at the top of a "stack" containing the component exposures, and collapse the stack down. But the (disposable) intermediates don't get imported to LR, and by setting these to occur in a subfolder or with a distinctive name suffix, they are easily found and deleted in due course.
RP

Lens Profiles not registering in Lightroom 4

I have a number of lens profiles that I have created with Adobe Lens Profile Creator and placed in the designated folder, but when I run Lightroom, they do not appear in the list.
There is an "index.dat" file under folder 1.0 that I suspect needs to be updated, but I don't know how.
I also added a Minolta folder since there was noe befor to place my Minolta lens profiles. This does not show either when I run Lightroom.

Rikk is correct. User created lens profiles should be put under the user specific lens profiles folders.
On Mac, put them under (note there is no space in the "CameraRaw" sub-folder) or any of its sub directories:
Hard Drive>Users>your user name>Library>Application Support>Adobe>CameraRaw>Lens Profiles>1.0
On Windows,
C:\Users\your user name\AppData\Roaming\Adobe\CameraRaw\LensProfiles\1.0
I thought ALPC will default to save to these user speficic locations.

Lens Profile not available for old photos

Hi
I got busy creating a lens profile for my Canon 550 and EFS 15-85 f/3.5-5.6 IS USM as there was no profile listed for this lens when I took some photos in early July. I now find that the profile is now available (for the photos taken in the last week or so) and automatically selected when I select 'Enable Profile Corrections' BUT is still not available for the older photos - can someone tell me how to get the new profile available for the older photos - in fact why does the list not show the new profile??

Thanks Ian
I do all RAW now but to get more photos on my SD card
used JPEG for a time.
Richard

Lens profile not appearing in Lightroom

Hi folks,
I have installed Lightroom 5.4 from CC on Windows 8 and just ensured it is updated.
I am attempting to use a lens profile correction for a Sony E 35mm 2.8 lens (which should have been added in the Lightroom 5.3 update).
When I attempt to select the lens profile, the only lens I have showing under Sony is a DT 18-200mm.
Do I need to activate anything in order to get the Sony 35mm to show?
Cheers

The lens profile is likely built in and always applied so there’s nothing to select; however, if you want to upload a raw file I can check in Photoshop, which actually tells you that it’s using a built-in profile, rather than leaving you wonder. Use http://www.dropbox.com and post a public download link, here, in a reply.

Getting EDI:Partner profile not available.

Hi,
I am a newbie to SAP XI. As I am doing File to IDOC scenario, I am getting error - EDI:Partner profile not available.
My Scenario details:
1. Created RFC Destination, RFC port, logical System and Partner profile in both Sender (XI) as well as Receiver(SAP R/3) systems.
2. Created SWCV, Technical sys, Business Systems in SLD. I used the Logical system created (for SAP R/3) on XI system in my business system.
3. Created Data type, Message type, Message interface, Message Mapping and Interface mapping in Integration Repository and activated them.
4. Imported IDOC from SAP r/3 system during Namespace creation and used it for mapping.
5. used Integration Directory wizard to create Communication channels, Sender & Receiver agreements, Receiver Determination, Interface Determination.
6. Creaed a new business service for sender and added "Adapter Specific Identifier with Logical system created (for SAP R/3) on SAP XI.
7. Activated all Standard Change list items.
The file for the above Scenario has been picked up amd i am getting "Chequered Flag" on both ends in "SXMB_MONI" monitor. When i change over to SAP R/3 to check idocs created (i.e., T.code - we05) my scenario idoc status is 56 and it says.. Status; Idoc with errors added.
I have gone through many of the forum suggestions and blogs regarding this issue, but still not able to resolve my problem.
can somebody suggest me solution please.
Thanks,
Vijay.

Hi,
6. Creaed a new business service for sender and added "Adapter Specific Identifier with Logical system created (for SAP R/3) on SAP XI.
>>>Check this for Reciever Business System.. not for Sender system..
BTW, if you get chequered flag in XI, then idoc data is sent from XI. Can you check all the data from XI is populated in the idoc structure in SAP R/3 in we05...by clicking each segment.. if so, then there is no problem from XI..
check WE20 ..partner profile configuration in R/3 also check inbound parameters are given
Regards,
Moorthy

Partner profile not available.

Dear Folks,
i am doing the scenario JDBC to IDOC. For that i did all the necessary ALE settings and configured the systems. While executing that scenario. In we02, i am getting the error partner profile not available eventhough i configured it. From the error i found that, in technical info, partner number and port are different. And i am getting some Default parnter number and port.
From my observations, i checked the Sender business system and i found that, logical system which was mentioned for this business system is replicating as a default parnter number in the technical info.
please guys i need your valuable suggestions to eradicate this error.
Regards,
Dileep

Hi Mark,
I checked the payload and i am not using header mapping.
I tested the same by doing some modification like, In sender business system, i replaced the default logical system name with which i am using.Then idoc status is changed to status 50. But i am getting the Default port as previously said.
one more thing is , whenever i am getting this partner profile error, it is hitting one of my Company portals. i.e., displaying this partner profile issue in MSS(managerial self service) of HR Portal.
I was little bit confused of why it is hitting the portal?
what would be the key point for their connection?
Please help.
Regards,
Dileep

Re : EDI: Partner profile not available

Hi
while i am transfering material master i am getting the following error
' EDI: Partner profile not available'
How to solve

Hi,
First check the change pointers configuration for matmas and then check configuration part for that partner.
Check these threads for complete information on Change Pointers:
Change pointers
what are change pointers
Regards,
Raju.

IDOC is Getting Fail with - 56 Status EDI Partner profile not available

Hi,
I am trying to Post invoice Data into IDOC on ECC Side.
My Scenario is File u2013 XI u2013 ECC(IDOC).
But It is Getting Fail with 56 Status u201C EDI: Partner profile not available u201C
On Control record I am getting this
Port BLANKKKKKKKKKK
Partner Number CLNTDEC110 Logical system for Client
Partn.Type LS Logical system
Function BLANKKKKKKKKKK
Port SAPDPI
Partner number CLNTSAMPLE
Partn.Type LS Logical system
Partner Role BLANKKKKKKKKKK
My configurations are Like this :----
On ECC Side MY SID is DEC
On ECC side I have two logical system in CLNTDPI100 for PI
 CLNTDEC110 for ECC.
I have Partner profile on ECC system on CLNTDPI100 logical system - we20
Added message type in inbound side of partner Profile (INVOIC-INVOIC02)
ON SAP PI/ XI System MY SID is DPI
IDX 1 has Port name SAPDEC
On Message mapping EDI_DC40 is mapping with constants with below given value
<INVOIC02>
 <IDOC BEGIN="">
 <EDI_DC40 SEGMENT="">
 <TABNAM> </TABNAM>
 <DIRECT>2</DIRECT>
 <IDOCTYP> </IDOCTYP>
 <MESTYP>INVOIC</MESTYP>
 <SNDPOR>SAPDPI</SNDPOR>
 <SNDPRT>LS</SNDPRT>
 <SNDPRN>CLNTDPI100</SNDPRN>
 <RCVPOR>SAPDEC</RCVPOR>
 <RCVPRT>LS</RCVPRT>
 <RCVPRN>CLNTDEC110</RCVPRN>
 </EDI_DC40>
Regards
PS

Check the following :
in We 02 which partner number is displayed just in the posted IDOC -> 2nd coloum in the IDOC list .and verify if the
same you have in Partner profile. Actually this details comes from ECC business system's logical system name which you give in SLD.
in we 19 - take the error iDOC numner and open the IDOC ->click on the first line -> check entries as you mentioned
above sender port should be PI port not empty.you need to check the partner profiles properly
follow these steps
1. create a RFC destination of tyoe H for Pi system- 2. create a Port and assigen the RFC destination to it
3 create logical system for PI BD54 PICLNT001 say , 4 with the same name create a partner profile in We20
 in parter profile maintain the inbbound message parameters and add the PI port as receiver port in it .Give the basic type also .
now
for sender details in ur case PI : u have port (defined in PI IDX1),patner number (LS defined in ECC PICLNT001), parter type LS.
for receiver you have port defined (as above), partner number the logical system for ECC system.
in we 19 ,, edit the control record as above and go to the tab inbound processing and test the internal posting
it should work fine. in the adapte specific attribuet for receiver ECC system , maitain the same LS name , if any wrong entry is
there then change the LS in sld to poing to correct LS/
refer this
http://www.riyaz.net/blog/xipi-settings-in-r3-partner-system-to-receive-idocs/technology/sap/26/
Regards,
Srinivas

Status 56 : EDI Inbound Partner Profile not available

I am trying to load an inbound 856 IDoc from EdI subsystem to SAP. It si giving me an error 56 saying Inbound partner profile not available.
I have set up the partner as Vendor in we20. Is there any other place that I need to set up the partner. We have inbound docs coming in as a customer(KU) but this is first vendor set up
Do you know what I am missing?
When I clicked on status message 56 -- says /ICPLPLIVA/LI/LF/DESADV///T/....key fields missing in EDP21? is the error really meant that?
Thanks in advance

Hi,
Can you tell us about the IDoc control record?
In order to determine whether need to setup LI or KU partner profile.
Please go to WE02 and check the IDoc control record.
What are the values in partner tab?
Port             ???
Partner number   ???
Partn.Type       ???
Function
Port             ???
Partner number   ???
Partn.Type       ???
Partner Role
Regards,
Ferry Lianto

EDI: Partner profile not available

Hi,
We have performed a client copy on the source system.
In RSA, source system check, errors occurred:
The following errors occurred in the source system: RSAR 374
EDI: Partner profile not available E0 332
Entry in inbound table not found E0 414
Entry in outbound table not found E0 400
In WE20, I click on the partner profile, check ok.
Pls assist.

Hi,
Try restore from context menu of the source system, this would recreate the partner profile entries.
regards,
Pruthvi R

EDI: Partner profile not available for the Ack received

Hi All,
All the scenarios are IDOC -->XI --> File
We have different scenarios of IDOC to File, where SAP sends IDOC to two (we have 5 here letu2019s say 2) diff FTP locations one say FTP1 and other FTP2 and we used 3 business systems in SLD.
1)      one for Sender SAP system(say BS_SAP) and assigned a Logical System say LS_SAPCLNT100
2)     Second one for the receiver FTP1 and assigned a Logical System LS_FTP1
3)     Third one for the receiver FTP2 and assigned a Logical System LS_FTP2
And we are getting the error in the Sender SAP System for the acknowledgement sent from the FTP1 server EDI: Partner profile not available for the LS_FTP1 when we send the IDOC to FTP1 and EDI: Partner profile not available for the LS_FTP2 when we send the IDOC to FTP2.
This is because in SAP we do not have the Logical Systems for LS_FTP1 and LS_FTP2.
Now my question is how to get rid of this? Do we need to create Logical systems in SAP for third Party Systems?
If not how to overwrite and use a single LS for all of the third party Business Systems?
Please suggest .
Regards,
Sridhar Reddy

And we are getting the error in the Sender SAP System for the acknowledgement sent from the
FTP1 server uF0E0EDI: Partner profile not available for the LS_FTP1 when we send the IDOC to FTP1 and EDI: Partner profile not available for the LS_FTP2 when we send the IDOC to FTP2.
did you get a chance to go through the below threads:
ERROR: idoc in R/3
check out the blogs mentioned in the above link...
Also check the last point (9) mentioned in the below blog:
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi

EDI: Partner profile not available R/3 -- XI

Hallo,
when I send an IDoc-Message from R/3 to XI, I get following error:
"EDI: Partner profile not available" (transaction we05)
I have created the partner profiles in we20, but there are not available.
What could be the reason of this error?
I have created in XI a logical system "SAPR3" (transaction bd54) and I have assigned it the idoc-inbound-parameter (transaction we20). also the logical system of the business system "R3System" in the "adapter specific identifications" is "SAPR3".
So, is the "partner no name" of the idoc from the sender-system (r3) the reason? in transaction we05, it is called WMS.
Thanks in advance.
regards
Stefan

<<You need to set Outbound parameters.
<<Inbound parameters are set in case of XI to R/3 scenario
The sap-documentation (HowTo_IDOC_XI_Scenarios.pdf) says, that you should create a partner-profile in R3 with outbound-parameters and that you should create a partner-profile in XI with inbound-parameters for the direction r3 --> xi
Is this wrong?
following informations are from transaction we05 in XI:
recipient information
port:
partner number: XI
partner type: LS
function:
sender information
port: sapi4711
partner number: WMS
partner type: LS
partner role:
Which of them should I create as logical system in transaction bd54 (XI)?
Which of them should I use for partner no. in transaction we20 (XI)?
Should I create outbound or inbound-parameters?
Thanks.
Regards
Stefan

IDoc eror as "EDI. Partner profile not available

Hi All,
I got IDoc eror as "EDI. Partner profile not available " in WE09. Please clarify as to what exactly the error message means, " EDI. Partner profile not available ".
Thanks
Yash

Yash
I guess you need to maintain partner profile for that Business Partner using T code WE20. That's what it means.

Lens profiles not available in Lightroom CC

Similar Messages

Maybe you are looking for