Leopard lock ups.....

HI, I thought i might share this with you if you are having lock ups in leopard on a G5 with an ATI X800XT graphics card. I have a G5 2.7 with a fresh install of leopard and with the aforementioned card and was getting constant lock ups which resulted in me having to hard power down constantly.Also you could hear the cards fan revving quite a lot as well. If you go into system prefs and set colours to thousands in stead of millions then the constant locking up will stop. ATI and apple need to address this ASAP! But for now its a workaround. Hope this helps

I assume you tried all teh usual voodoo - reset NVRAM, performed AHT etc?
If you need a working system then I'd suggest you restore back to Tiger from your backups and then call Apple.
You could install a small Leopard test partition and have them walk you through troubleshooting steps.
It may be a Leopard driver issue or could be that your system has a real hardware problem.
Good Luck.

Similar Messages

Constant lock ups with Leopard!

I find myself having to hold in the power button to turn my computer off almost everyday now! I am not sure what is causing these constant lock ups! Ever since upgrading to Leopard have I noticed this. Yesterday It happened when trying to open iTunes. Today it happened when I clicked on MAIL. The icon just bounces in the dock and nothing happens. I hit FORCE QUIT and that doesn't work either.
Do I need to clear something out or get rid of something? Even when I try to restart my computer sometimes that will lock up too! The only way to get around any of these issues is to hold in the power button to turn the whole computer off, wait a few seconds and turn it back on. Once its back on, then I have full functionality out the computer again but its getting on my nerves that I have to do this all to often!
I think they are some cool features with Leopard but I am experiencing way to many bugs/problems with it to be 100% happy with it.
As I am writing this posting, I just clicked on my APPLE icon in the top left of the screen and then clicked ABOUT THIS MAC to make sure I was using the most current version, and NOTHING happened!

Try reinstalling. It sounds like you did an upgrade from an earlier version that may have been corrupt to start with. You may be able to do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger) and/or TechTool Pro (4.5.2 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Beach balls and lock ups

ep... need some help with my issues that have been going on for a while.
turning off time machine reduced the temporary lock ups, but they still occur.
also have done a complete reinstall of leopard... issues still occur.
my setup... a mac pro.
programs randomly lock up, show a beach ball and force quits do not respond very quickly (sometimes it takes 1-2 minutes to get out of the stall).
adium, handbrake experience frequent stalls.
ical and fontbook won't open at all... just beachball and eventually quit.
firefox crashes about 2-4 times a day.
terminal is very crashy.
what can i do to solve these issues? i'd gladly reformat but the archive & install (without importing settings) barely improved the situation.
thanks for your time & effort to all those that assist...

holy crap i removed all the windows truetype and font fork (eh?) files from my system and fontbook now loads.
i had a feeling it was font related, but things are looking up...
will post more findings...

Verify Disk results, confusing.. Can they be the cause of system lock ups?

I have been experiencing strange freezes on my Mac Pro 2008 system.
My boot disk is a 50% full 128GB SSD from Crucial and is running beautifully fast however for the past couple of weeks my system often freezes for anything from 3 seconds to 30 seconds and then the Finder restarts.
After the Finder restarts everything continues running smoothly. As if nothing ever happend, no error reports, no apps crashed, nothing.
I have verified disk permissions and verified the disk itself in Disk Utility but I am not quite sure what these results mean and if they could be the cause of these random lock ups.
here are the results:
Verify permissions for “Boot Disk”
Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired.
Group differs on "private/etc/hostconfig", should be 0, group is 20.
Permissions verification complete
Verifying volume “Boot Disk”
Performing live verification.
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Missing thread record (id = 5888152)
Incorrect number of thread records
Checking multi-linked files.
Checking catalog hierarchy.
Invalid volume directory count
(It should be 184294 instead of 184295)
Checking extended attributes file.
Checking volume bitmap.
Checking volume information.
The volume Boot Disk was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
I would really appreciate it if someone that knows their way around this stuff could help me troubleshoot this.
As for the problem of the system locking up it does not happen in the same application consistently.
Often it happens in Firefox but it could equally often happen when working in Photoshop, browsing files in the Finder or trying to access the Spotlight search via the keyboard shortcut.
When the system locks up I get the spinning beach ball and I can still move the mouse and click and even still access CMD+TAB app switcher, switch spaces and all those things, just applications become non responsive.
If you need any more details please let me know.
Thanks for reading,
Jannis

These are innocuous errors that you may safely ignore. However the disk error is a problem. Do the following:
Repairing the Hard Drive
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

Pages '08 lock ups

A couple months ago, I started having issues with Pages '08. It would lock up while I was typing, or even something as simple as scrolling the page down. All I would get was the little rainbow wheel and a locked up document. At first I thought it was just the one file I was working on, but now it happens all the time. It locks up so bad sometimes that it forces a restart of the computer. No other programs are having this issue. Should i just reinstall Pages '08 from the disc or what. Cause this has made my main wordprocessing program completely useless. I'm on Mac OSX 10.5.8

Update:
Well I think I got it figured out. For some reason, the spell checker was causing the problem. I've always had it set to "Check spelling as you type", but for some reason that is now causing Pages to lock up. So my work around is to simply turn off the "Check Spelling as you type" option, and now there are no more lock ups.

Terca 9100 lock ups

Hi!
I recently got my hands on a second hand tecra 9100. I got it free since the previous owner complained about random lock ups or freezes. As i've testaed the laptop myself i experienced this aswell. It can freeze just about anytime but i've never had it running flawlessly for more than 20 minutes i recon. Sometimes it also refuses to start up. I do not know if this is a lock up in the initial startup sequence.
Anyway it will lock up even in bios and i have dissassembled it and put it back together, replaced the RTC battery (with a non rechargable) and removed any hardware not crucial for useage (i.e WiFi card, extra RAm modules, modem card).
I'm clueless, anyone got any idea of what to try next?
Regards Simon

I think you cant fix it by yourself
In your case the ASP should check the notebook and if necessary replace the faulty part/device.

R835 P56X lock ups

From day 1 (purchased a month ago) I'm still having lock ups with this laptop! After few hours of use the screen goes black (sometimes blue), if I try to revive it the fan kicks in at full speed sounding like a leaf blower!
I've reinstalled Win7 with the latest drivers, installed a new SSD instead of the HD and this problem keeps re-occuring randomly (daily)!
I certainly would appreciate any ideas!

I replaced my HDD with a OCZ Vertex 3 SSD for my R835-P56x. It boot in seconds and runs nice and fast, but I get lock-ups and BSOD after several hours (as described above). Not sure if it had the problem with the HDD, because I didnt use the PC very long before upgrading. I am also running a 800MB Dataram RAM Disk (Version 3.5.130) for browser cache, which I suspect could be the culprit. My bios is 3.90 (7/31/2012).
Portege R835-P56x, i5 2410M, 16GB RAM, Vertex 3 SSD 240GB.

Crashes and Lock-ups

I have been experiencing crashes and lock-ups in Premiere CS4.
Last week I was running Encore to burn a DVD and when I noticed the processor was running flat out. I decided to run Core Temp to check the temperatures. At that point my encoding stopped and Encore locked up.
Now I usually have Core Temp start when I load Windows. I have now disabled it and when I ran Premiere last night guess what? No lock-ups. Now this is early days but I suspect Core Temp might be the problem. I hope so. I'll report back with my findings when I have had more time to experiment.
PS I'm running Windows XP SP3, Quad Core 6600 and 4Gb RAM
Cheers,
Tim

You posted near the end of a similar thread in the CS5 forum. I branched your post into a new topic and moved it here to this forum. My post #1 was a request to be more careful where you post.
If you want to see where you originally posted, click on the word "thread" in the phrase "Branched from an earlier thread", located at the top of the post list.
-Jeff

Lock ups XF-I and X1900

Hi I am running
EVGA 33-K8-NF4-AX with the latest Bios
Radeon x900xtx
2 gig OCZ 2-3-2-5 ram
Antec true power 2.0 550watt PS
Sony 80a Dvd burner
70 gig raptor sata dri've
300 gig seagate sata 3 dri've
Sound Blaster Xf-I extreme music
Windows XP SP2
I get random lock ups under any D3D or OpenGL game as long as im on the desktop my sounds function without an issue. Previously I had been using a EVGA 7800 gt with no problems. Under the 7800 gt I did not have any lock u
ps.
Before installing the Radeon x900xtx I did a format of the dri've and a clean install of windows xp with SP2. I have tried catalyst 6.4 and the lock ups were very frequent in catalyst 6.3 they are less frequent and more random. I have upgraded to the latest drivers for every other component on my pc. I posted this here and also I have sent in a ticket to ATI because if I remove the XF-I and go with the real tek 8 channel onboard sound all of the lock ups disapear. When the XF-I is in the pc and it locks up it goes into a sound stutter at random times in any D3D or OpenGL game

I don't think so, Lion with the latest updates is running fine for most of us.
Post the log for your next lockup or the previous one if you can isolate the timeframe.
/Applications/Utilities/Console > system.log

I am getting frequent lock-ups and blue screens during boot up. The lock ups occur during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button. Ideas?

I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.

I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.

Total lock-ups with fan running - translate system.log file please!?

Hi, all. My late 2005 2.3 gig dual G5 has been experiencing random lock ups for as long as I can remember. My system is up to date and I have tested each pair of the 5 gigs of ram that I have and the system freezes with each pair. It can happen at any time, when I am doing absolutely nothing, for example, overnight. I am at my wits end!
Here's the system log file for the latest freezes. Can anyone tell me what's going on here??? I really need to get to the root of this problem. Thanks so so much in advance.
Apr 12 17:32:52 Marc-Weinbergs-Computer kernel[0]: AFP_VFS afpfs_Reconnect: connect on /Volumes/Macintosh HD failed 89.
Apr 12 17:32:52 Marc-Weinbergs-Computer kernel[0]: AFP_VFS afpfs_unmount: /Volumes/Macintosh HD, flags 524288, pid 62
Apr 12 17:44:46 Marc-Weinbergs-Computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: Started\n
Apr 12 17:44:46 Marc-Weinbergs-Computer /Library/Application Support/FLEXnet Publisher/Service/11.03.005/FNPLicensingService: This service performs licensing functions on behalf of FLEXnet enabled products.\n
Apr 12 18:01:06 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:01:49 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:08:29 Marc-Weinbergs-Computer diskarbitrationd[69]: SDCopy [1056]:36091 not responding.
Apr 12 18:16:18 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 18:16:53 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 12 19:24:12 Marc-Weinbergs-Computer ntpd[191]: time reset -0.650307 s
Apr 13 01:05:45 Marc-Weinbergs-Computer ntpd[191]: time reset -0.496917 s
Apr 13 03:15:03 Marc-Weinbergs-Computer cp: error processing extended attributes: Operation not permitted
Apr 13 07:15:03 Marc-Weinbergs-Computer postfix/postqueue[1778]: warning: Mail system is down -- accessing queue directly
Apr 13 03:15:03 Marc-Weinbergs-Computer cp: error processing extended attributes: Operation not permitted
Apr 13 15:53:53 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 13 15:53:54 Marc-Weinbergs-Computer KernelEventAgent[62]: tid 00000000 received unknown event (256)
Apr 13 22:15:48 localhost kernel[0]: standard timeslicing quantum is 10000 us
Apr 13 22:15:47 localhost mDNSResponder-108.6 (Jul 19 2007 11: 33:32)[63]: starting
Apr 13 22:15:48 localhost kernel[0]: vmpagebootstrap: 506550 free pages
Apr 13 22:15:47 localhost memberd[70]: memberd starting up
Apr 13 22:15:49 localhost kernel[0]: migtable_maxdispl = 70
Apr 13 22:15:49 localhost kernel[0]: Added extension "com.firmtek.driver.FTATASil3132E" from archive.
Apr 13 22:15:49 localhost kernel[0]: Added extension "com.firmtek.driver.Sil3112DeviceNub" from archive.
Apr 13 22:15:49 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Apr 13 22:15:49 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Apr 13 22:15:49 localhost kernel[0]: using 5242 buffer headers and 4096 cluster IO buffer headers
Apr 13 22:15:49 localhost kernel[0]: AppleKauaiATA shasta-ata features enabled
Apr 13 22:15:49 localhost kernel[0]: DART enabled
Apr 13 22:15:47 localhost DirectoryService[75]: Launched version 2.1 (v353.6)
Apr 13 22:15:49 localhost kernel[0]: FireWire (OHCI) Apple ID 52 built-in now active, GUID 001451ff fe1b4c7e; max speed s800.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:48 localhost lookupd[71]: lookupd (version 369.5) starting - Sun Apr 13 22:15:48 2008
Apr 13 22:15:49 localhost kernel[0]: USBF: 20.590 OHCI driver: OHCIRootHubPortPower bit not sticking (1). Retrying.
Apr 13 22:15:49 localhost kernel[0]: Extension "com.microsoft.driver.MicrosoftKeyboardUSB" has no kernel dependency.
Apr 13 22:15:49 localhost kernel[0]: AppleSMUparent::clientNotifyData nobody registed for 0x40
Apr 13 22:15:49 localhost kernel[0]: Security auditing service present
Apr 13 22:15:49 localhost kernel[0]: BSM auditing present
Apr 13 22:15:49 localhost kernel[0]: disabled
Apr 13 22:15:49 localhost kernel[0]: rooting via boot-uuid from /chosen: 82827EDF-0263-3B93-BEED-4B114E820B85
Apr 13 22:15:49 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Apr 13 22:15:49 localhost kernel[0]: Got boot device = IOService:/MacRISC4PE/ht@0,f2000000/AppleMacRiscHT/pci@9/IOPCI2PCIBridge/k2-sat a-root@C/AppleK2SATARoot/k2-sata@0/AppleK2SATA/ATADeviceNub@0/IOATABlockStorageD river/IOATABlockStorageDevice/IOBlockStorageDriver/ST3320620AS Media/IOApplePartitionScheme/AppleHFS_Untitled1@10
Apr 13 22:15:49 localhost kernel[0]: BSD root: disk0s10, major 14, minor 12
Apr 13 22:15:49 localhost kernel[0]: jnl: replay_journal: from: 8451584 to: 11420160 (joffset 0x952000)
Apr 13 22:15:50 localhost kernel[0]: AppleSMU -- shutdown cause = 3
Apr 13 22:15:50 localhost kernel[0]: AppleSMU::PMU vers = 0x000d00a0, SPU vers = 0x67, SDB vers = 0x01,
Apr 13 22:15:50 localhost kernel[0]: HFS: Removed 8 orphaned unlinked files
Apr 13 22:15:50 localhost kernel[0]: Jettisoning kernel linker.
Apr 13 22:15:50 localhost kernel[0]: Resetting IOCatalogue.
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 1
Apr 13 22:15:50 localhost kernel[0]: Matching service count = 3
Apr 13 22:15:50 localhost kernel[0]: NVDANV40HAL loaded and registered.
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::start 1
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::end 1
Apr 13 22:15:50 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - entry
Apr 13 22:15:50 localhost kernel[0]: SMUNeo2PlatformPlugin::initThermalProfile - calling adjust
Apr 13 22:15:50 localhost kernel[0]: PowerMac112ThermalProfile::adjustThermalProfile start
Apr 13 22:15:50 localhost kernel[0]: IPv6 packet filtering initialized, default to accept, logging disabled
Apr 13 22:15:50 localhost kernel[0]: BCM5701Enet: Ethernet address 00:14:51:61:ee:78
Apr 13 22:15:50 localhost kernel[0]: BCM5701Enet: Ethernet address 00:14:51:61:ee:79
Apr 13 22:15:51 localhost lookupd[86]: lookupd (version 369.5) starting - Sun Apr 13 22:15:51 2008
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 21611008 to: 7857152 (joffset 0x952000)
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 673280 to: 24382976 (joffset 0x952000)
Apr 13 22:15:51 localhost kernel[0]: jnl: replay_journal: from: 3890176 to: 6294016 (joffset 0x7d01000)
Apr 13 22:15:51 localhost diskarbitrationd[69]: disk0s10 hfs 82827EDF-0263-3B93-BEED-4B114E820B85 NewestSeagate /
Apr 13 22:15:52 localhost kernel[0]: NVDA,Display-A: vram [90020000:10000000]
Apr 13 22:15:52 localhost mDNSResponder: Adding browse domain local.
Apr 13 22:15:53 localhost kernel[0]: hfs mount: enabling extended security on Maxtor
Apr 13 22:15:53 localhost diskarbitrationd[69]: disk1s3 hfs 0DBE2113-B1F5-388F-BF70-2E366A095330 Maxtor /Volumes/Maxtor
Apr 13 22:15:54 localhost kernel[0]: NVDA,Display-B: vram [94000000:08000000]
Apr 13 22:15:54 Marc-Weinbergs-Computer configd[67]: setting hostname to "Marc-Weinbergs-Computer.local"
Apr 13 22:15:54 Marc-Weinbergs-Computer /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
Apr 13 22:15:56 Marc-Weinbergs-Computer diskarbitrationd[69]: disk2s3 hfs 971CABB3-C211-38FC-8E91-6B4F8EA5FA20 B08-09-07 /Volumes/B08-09-07
Apr 13 22:15:56 Marc-Weinbergs-Computer loginwindow[110]: Login Window Started Security Agent
Apr 13 22:15:57 Marc-Weinbergs-Computer kernel[0]: AppleBCM5701Ethernet - en1 link active, 1000-Mbit, full duplex, symmetric flow control enabled
Apr 13 22:15:57 Marc-Weinbergs-Computer configd[67]: AppleTalk startup
Apr 13 22:15:57 Marc-Weinbergs-Computer TabletDriver[119]: #### GetFrontProcess failed to get front process (-600)
Apr 13 22:15:59 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
Apr 13 22:16:00 Marc-Weinbergs-Computer configd[67]: posting notification com.apple.system.config.network_change
Apr 13 22:16:01 Marc-Weinbergs-Computer lookupd[123]: lookupd (version 369.5) starting - Sun Apr 13 22:16:01 2008
Apr 13 22:16:01 Marc-Weinbergs-Computer kernel[0]: HFS: Removed 2 orphaned unlinked files
Apr 13 22:16:01 Marc-Weinbergs-Computer diskarbitrationd[69]: disk3s3 hfs CDA8BCC5-0CE4-33E8-A910-4B0952DBC230 FullBU-09-07 /Volumes/FullBU-09-07
Apr 13 22:16:04 Marc-Weinbergs-Computer configd[67]: target=enable-network: disabled
Apr 13 22:16:05 Marc-Weinbergs-Computer configd[67]: AppleTalk startup complete
Apr 13 22:16:09 Marc-Weinbergs-Computer TabletDriver[237]: #### GetFrontProcess failed to get front process (-600)
Apr 13 22:16:09 Marc-Weinbergs-Computer launchd[241]: com.wacom.wacomtablet: exited with exit code: 253
Apr 13 22:16:09 Marc-Weinbergs-Computer launchd[241]: com.wacom.wacomtablet: 9 more failures without living at least 60 seconds will cause job removal
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:28 EDT 2008] : ATA device 'ST3320620AS', serial number '6QF0L6LR', reports it is functioning at a temperature of 95.0F (35C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:28 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '6QF0L6LR', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'ST3320620AS', serial number '6QF0LGS4', reports it is functioning at a temperature of 100.4F (38C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '6QF0LGS4', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'ST3320620AS', serial number '9RV000FC', reports it is functioning at a temperature of 95.0F (35C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'ST3320620AS', serial number '9RV000FC', appear to still be available. (Total Available: 36) (Use Attempts: 0)
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : ATA device 'Maxtor 6B300S0', serial number 'B6211G0H', reports it is functioning at a temperature of 89.6F (32C) degrees.
Apr 13 22:16:29 Marc-Weinbergs-Computer /Applications/DiskWarrior.app/Contents/MacOS/DiskWarriorDaemon: [Sun Apr 13 22:16:29 EDT 2008] : Spare blocks for ATA device 'Maxtor 6B300S0', serial number 'B6211G0H', appear to still be available. (Total Available: 63) (Use Attempts: 0)
Apr 13 22:16:54 Marc-Weinbergs-Computer /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder: _TIFFVSetField: tiff data provider: Invalid tag "Copyright" (not supported by codec).\n
Apr 13 22:16:54 Marc-Weinbergs-Computer /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder: _TIFFVSetField: tiff data provider: Invalid tag "Copyright" (not supported by codec).\n
etc.

Hi-
The machine seems to be having trouble with loading certain drivers, but, as this isn't a crash log, and doesn't show the "hang-up" or freeze, it's hard to tell.
Noted possibilities are:
-Microsoft keyboard (possible USB power problem)
-firmtek driver (from archive) questionable due to the "archive" annotation
-Wacom tablet driver, causing system problems
Running in Safe mode without freezes would help to determine if one of these drivers is the problem.
Other possibilities are outdated drivers, or simply a need to reinstall the OS.
If unnecessary, removing the driver(s) would be a good idea.
External USB and Firewire devices are all suspect, should all be disconnected, revert to Apple keyboard, and test system performance. Adding one device at a time, and testing each will be necessary to clear each device.
I have experienced system trouble when a Wacom tablet was not connected, but the driver was left installed.
Disabling the driver from Startup items may be necessary to test without the Wacom tablet connected.

System lock ups

lately i've been having a lot of system lockup problms.. you know the ones where that spinning rainbow balls shows up on the screen. you know i never had a problm running adiumx firefox and itunes at the same time, but lately i don't know if its the updates or what, but i'm getting a lot of lock ups, to the point where i can't play videos on itunes, or quicktime without it freaking out and freezing every couple seconds, or when trying to load firefox it take 10 15 secs, and then forever to actually get to a webpage, i do notice when i turn of growl i don't have as many problms, any suggestions.
powerbook g4
mac os x 10.4.8
1ghz processor
512mb ddr sdram
80 gig hd
dvd/cd-rw
got all the latest mac updates, and updates of most of the softwares i have on this computer
12" in powerbook Mac OS X (10.4.3)

teckie:
RAM can very likely be a part of your issue. If your 12" PB is one of the last 3 models it came with 256 MB of RAM. Considering the issues you are having you should consider maxxing it out to 1.25 GB.
ali b. mentioned your HDD. If your HDD has less than 10-20% free space it can contribute to the issue you are experiencing. It also increases the risk of directory issues, consequent data loss and even a crashing HDD.
Thirdly, I am not sure what maintenance procedures you use. But you should consider at least running Unix Maintenance scripts using a utility like MacJanitor, and doing Directory repairs and replacement with a utility like Disk Warrior. In addition, if you have not booted from your install disk and run Repair Disk recently, I suggest you do so.
Take a look at Gulliver's article on Mac OS X Maintenance for some very helpful tips and resources: http://discussions.apple.com/thread.jspa?messageID=607640&#607640
Post back with further questions or comments.
Good luck.
cornelius
Message was edited by: cornelius

System lock-ups after upgrading to Tiger

This topic was previously posted in 'Installation & Setup'.
After 3 days (and 18 views) I got no replies.
Maybe that forum was not appropriate, so I decided to try it in this forum.
About 4 months ago I exchanged my 80 GB Hd in favor of an 200 GB Maxtor 6L200P0. One day later I upgraded OS X 10.3.9 to Tiger (retail DVD).
At that time I experienced a frequent (several times a day) lock-up of my system.
No messages, nothing, not even after powering down and restarting.
After some time I figured out that the lock-ups occurred on Internet access. Clicking on a link in Safari, posting messages on Discussions. Even Mail locked the system a few times. Also Corripio (artwork and lyrics finder for iTunes) caused the system to lock.
After that, I decided to perform an Archive & Install (first time after almost 4 years of using this Mac). Except from having to re-install a number of 3rd party apps. the system seemed to perform well. No lock-ups were experienced for a few weeks.
Problem solved, I thought.
Although far less frequent than before, I do experience those annoying lock-ups a few times a week.
Here are my questions:
What could be the cause of the lock-up?
Is is advisable to perform a Clean Install? What advantage do I have of, it opposite to performing an A&I. I'm reluctant to perform a clean install at the moment, because I haven't found a few serials of commercial and shareware applications yet ( I know, I should have written them down :-/ )
Any hints/tips to track down the exact cause?
TIA
M
P.S. ( I do have a bootable complete backup of my HD on an Maxtor Onetouch II )

Hi, M.
1. You wrote: "What could be the cause of the lock-up?"The number of potential causes range from disk corruption or bad applications to serious hardware problems, such as a defective logic board.
2. You wrote: "Any hints/tips to track down the exact cause?"I suggest treating the "lock up" problem — better described as a "freezes and hangs" problem — similar to a kernel panic as the basic troubleshooting and hardware testing steps are virtually the same. See my "Resolving Kernel Panics" FAQ.
It provides a comprehensive roadmap which you should follow from beginning to end, in the order specified in the FAQ.
2. You wrote: "Is is advisable to perform a Clean Install? What advantage do I have of, it opposite to performing an A&I."The term "Clean Install" does not apply in Mac OS X. That is obsolete Mac OS 9 terminology. The closest Mac OS X equivalent to a "Clean Install" is an Archive and Install with the Preserve User and Network Settings option, which it sounds like you've already tried once previously, but you may want to try again as part of the troubleshooting process I outlined above. See my "General advice on performing an Archive and Install" FAQ for some important tips on this process.
The other options are:
• Archive and Install without the Preserve User and Network Settings option: This reinstalls the OS and wipes out both your accounts and your network configuration, but preserves the previous System folder.
• Erase and Install: Erases the hard drive, i.e. Macintosh HD, and reinstalls the OS from scratch, preserving nothing: your accounts, network settings, and everything else on the drive are deleted.
Of those two, and since you have a bootable backup, the second (Erase and Install) would be the second-to-last thing you would try, the last being taking the machine in for service.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

WRT54GS LOCK-UPS

I currently own a version 6 wrt54G and version 5 wrt54gs and can only eliminate intermittent lock-ups on both routers by downgrading to the earlier version of firmware that shipped with these routers. 1.50.8 version of the firmware for both hardware revisions seems to have ZERO issues with connectivity. Both routers have been running for 2 weeks flat now with ZERO Disconnects. As soon as I update to 1.52.5 the problem reappears so go figure. Anything after 1.50.9 thru to the latest 1.52.5 firmware revisions produces exactly the same connectivity issues. My last conversation with linksys customer support resulted in and I quote "YOU ARE NOT SUPPOSED TO DOWNGRADE TO AN EARLIER FIRMWARE DUE TO THE FACT THAT YOUR ROUTER WILL CATCH FIRE! Never heard anything so absurd in my entire life! No response from a Linksys Tech or Forum Specialist to this post obviously concludes that in fact this is a FIRMWARE RELATED issue and Linksys is doing nothing at all to rectify it. Also I have noticed that virtually all the European Linksys Download sites for this revision of router don't go above 1.50.6 which is the firware that shipped with my router. BULLDOG

I meant xorg-server 1.6.x
I've used this script to reinstall from cache:
pacman -U /var/cache/pacman/pkg/xorg-server-1.6.3.901-1-i686.pkg.tar.gz \
/var/cache/pacman/pkg/xorg-server-utils-7.4-7-i686.pkg.tar.gz \
/var/cache/pacman/pkg/xf86-video-intel-legacy-2.3.2-3-i686.pkg.tar.gz \
/var/cache/pacman/pkg/xf86-video-vesa-2.2.0-1-i686.pkg.tar.gz \
/var/cache/pacman/pkg/xf86-input-evdev-2.2.5-1-i686.pkg.tar.gz \
/var/cache/pacman/pkg/xf86-input-keyboard-1.3.2-2-i686.pkg.tar.gz \
/var/cache/pacman/pkg/xf86-input-mouse-1.4.0-2-i686.pkg.tar.gz

P7N SLI Platinum lock-ups

My specs:
Q6600 stock speed
Kingston HyperX pc8500 2x 1gb. I manually set it to it's rated timings, voltage and frequency. I have also tried different ram, from Exceleram and it makes no difference.
2x Asus EN8800GT 512mb cards (tried using just one card too, tried switching to a different 8800gt card from sparkle too, no change.)
HDD: Have tried several hard drives, pata and sata from probably all the manufacturers, i dont see why i need to post their specs since they problem persists nomatter what hdd i use.
Windows XP SP3 proffessional.
nothing else is in the system, i removed every piece of hardware, like sound card, optical drive, etc. to isolate the problem.
Power supply: Thermaltake ToughPower 700W
BIOS Version: the beta bios posted on this forum that supposedly fixes the video corruption bug (it doesnt). Also tried 1.0 and 1.1
The problem: random lock-ups. Sometimes it doesnt happen for 2 days and then BAM! Its happening every 15 minutes now. It might stop happening for another 12 hours and start locking up again. It only ever happens when im working in 2d applications like browsing, using messenger or IRC, watching videos on youtube or in a media player, or just moving files around or anything mundane like that. it once happened when i wasnt touching the keyboard or mouse at all, i was waiting for some files to finish copying over LAN. I also get the famous video corruption but it is EXTREMELY rare, like once a month. It crashed the last time the video corruption appeared, once i tried to click the player to pause, the system crashed. The system will never lock up while playing games, i play medieval II total war for days without any problems. The store i bought the p7n from tested it for me and they said it worked fine, but they used an ATI card so that may be a clue? Then again, they are really incompetent and didnt run the right set of tests, and ignored what i had told them about the nature of the crashes.
Detailed description of the events: System freezes, first everything except the mouse is frozen but if i try to click with the mouse, it freezes too and the screen flashes a black screen every few seconds. it never recovers and i have to shut it down by holding the power button for several seconds. some of the 2d graphics in windows get corrupted with artifacts, and the mouse does get heavily corrupted usually.
What i've tried:
I thought the mobo was defective but it isnt, i got a new mobo from the store and it has the same problem.
Tried working my way through every combination of memory timings, frequencies and voltages that i thought might make a difference but it has no difference on the crashes.
All the hardware works perfectly in my Asus P5N32-E SLI motherboard (i bought this msi mobo for some different reasons that i wont go into here), so theres nothing wrong with any of my components.
The only item i've not had the oportunity to switch with a different one is the power supply, but again, it works perfectly with all other motherboards that i've tried.
Is this possibly related to the video corruption bug? Does anyone have any idea when the next bios release is due? Please help, it sucks to buy an expensive motherboard that just doesnt work. i'll have to buy a 3rd sli mobo if I cant fix this.
PS: Is it not possible to regulate fan speed for sysfans connected to the mobo's fan connectors? My asus mobo had great fan speed controls in the bios, if this one doesnt have any such options, i call that ridiculous.

I appreciate your effort, guys. I've tried running the memory in 800mhz and on auto timings and on some other timings too (i was kinda desperate and i messed around with the memory configuration for days with no success), and tried auto volt (it gets set to 1.8 which the memory is rated for at 800mhz) and tried 1.9 and 2.0 and 2.1 and 2.2 and i've tried completely different memory modules too that i borrowed, and tried running in single channel with both modules and running just 1 module. none of these experiments had any effect on the crashes :\. But don't you think this could be related to the video corruption bug? I always thought it was, since this problem doesnt seem to happen for me when there is an ATI card in the system. Not that my 8800gt cards are defective in any way either, they are rock solid on my other motherboard.
I have one more theory, some weird inexplicable compatibility problem between this particular PSU and this particular mobo. Think it's a possibility? The psu is the only thing i have not switched out for another component, every other component i have switched for another one that was known to be working fine.
also, there is the extremely distant possibility that the issue is caused by an issue that the mobo might have with BOTH the kingston and the excelleram modules that i tried, however this seems far-fetched. but this problem is a fact and SOMETHING is causing it. i've eliminated almost everything i can think of.

Leopard lock ups.....

Similar Messages

Maybe you are looking for