Leopard server and external DNS issues?

I am trying to setup a new leopard server for a school with the internet being streamed in from the local borough with filtering for the students via DHCP with a range of 10.x.x.50 - 10.x.x.200. I have all their details (IP, subnet, router) inc their DNS settings. Now I want to create an OD master but am going insane with DNS as the new layout is confusing things. I am using the primary zone name "schoolname.internal" and giving it the manual IP address of the ethernet card 10.X.XX.XXX, I can ping clients around me but the server will not resolve correctly, I am using the external DNS settings provided by the ISP as forwarders.
I will admit that I am still getting my head around DNS and would really like some more details into how to configure Leopard for this, Why can't I use the internal IP address setting of my server for the DNS?
Plus do I need to have DHCP running on the server for OD in Leopard if it is being given by the external borough supplier ?

Ladies and gentlemen, I have the answer.
I stumbled across this accidentally when I was playing desperately in the Finder trying to get some inspiration about this issue.
The problem doesn't lie in the clients... it lies in the Server.
Here is my solution:
1. In the finder, right-click on the external drive, and select "Get Info".
2. Under "General", there should be 2 little check boxes, "Shared Folder" and "Locked".
3. Click on "Shared Folder" to put an X in it.
Thats it!
For some reason Time Machine setup didn't share the folder and so the client machines recognised it as a shared time machine backup source, but couldn't actually find it on the network because it wasn't shared.
Have fun ladies and gentlemen!!

Similar Messages

I transferred files from a NAS server to the Mac Mini Snow Leopard Server and now some of the files have Custom Access and can't be opened by some users. How do I fix this?

We're setting up our Mac Mini Snow Leopard Server, and in the process transferred files that had been stored and accessed from our Blackarmor NAS server over to the Mac. These files were all created on PC's and are Office Excel files, WordPerfect files or PDF's. When you look at the files on the Mac from the Mac and bring up Get Info for the affected file, it says that the file has Custom Access. The files that work properly don't have that configuration. I can access and open the files on some computers, but some users can't open the files from their computer even though they can see it. We're all using PC's and they get the Error: Access Denied-Contact your administrator--or something similar. I've seen on the web similar issues and it may have something to do with ACL permissions. I don't know enough about Mac OS to understand this, but what is baffling is that they can be opened from some PC's but not others, and all of the Users have the same accessibility to the files. Thanks for a solution!!

Oh, on the losing Internet, try this...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
Click OK.
PS. Your English is quite good & completely understandable.

Setup internal and external DNS namespaces best practice

Is external name space (e.g. companydomain.com) and internal name space (e.g. corp.companydomain.com or companydomain.local) able to run on the same DNS server (using Microsoft Windows DNS servers)?
MS said it is highly recommended to use a subdomain to handle internal name space - say corp.companydomain.com if the external namespace is companydomain.com. How shall this be setup? Shall I create my ADDS domain as corp.companydomain.com directly
or companydomain.com then create a subdomain corp?
Thanks in advanced.
William Lee
Honf Kong

Is external name space (e.g. companydomain.com) and internal name space (e.g. corp.companydomain.com or companydomain.local)
able to run on the same DNS server (using Microsoft Windows DNS servers)?
Yes, it is technically feasible. You can have both of them running on the same DNS server(s). Just only your public DNS zone can be published for external resolution.
MS said it is highly recommended to use a subdomain to handle internal name space - say corp.companydomain.com
if the external namespace is companydomain.com. How shall this be setup? Shall I create my ADDS domain as corp.companydomain.com directly or companydomain.com then create a subdomain corp?
What is recommended is to avoid having a split-DNS setup (You internal and external DNS names are the same). This is because it introduces extra complexity and confusion when managing it.
My own recommendation is to use .local for internal zone and .com for external one.
This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Get Active Directory User Last Logon
Create an Active Directory test domain similar to the production one
Management of test accounts in an Active Directory production domain - Part I
Management of test accounts in an Active Directory production domain - Part II
Management of test accounts in an Active Directory production domain - Part III
Reset Active Directory user password

Best Practice - Leopard Server and a Windows Server/Application

Our family owns an accounting practice in Northern California. We all use MacBook Pros running Leopard as our client machines.
Our customers all use QuickBooks for Windows for their accounting software. We currently host and store our customer's QuickBooks company files on a Windows 2003 SBS Server. Our staff connects to the Windows Server to launch QuickBooks and perform our accounting services. We do not use any of the features of the Windows Server besides the ability to log in with multiple user sessions to launch QuickBooks from both internal and remote office locations.
Since we all use MacBook Pros, we'd like to use Leopard Server and implement mail, calendaring, wikis, etc. My dilemma is figuring out if this is technically possible because we need to continue to log into a Windows PC, Server, etc with multiple staff's sessions to perform our accounting services with QuickBooks for Windows.
Can someone suggest a way we can do this? I'm not very technical since I am an accountant! We're hoping this can be done somehow!
Thanks for any suggestion and assistance!
John

We also have Quickbooks as our legacy Windows app.
Quickbooks files for several companies are stored on our Mac OS X Server, which is accessed by a Windows 2003 Server.
I considered using Parallels or VMware, but the administrative overhead seam excessive. (One installation of Windows is too many). Windows Terminal Services seamed the best fit. Additional client access licenses were required from Microsoft as Windows Server only comes with two administrative RDP licenses.
Our staff and staff from accounting and tax consulting firms connect to Quickbooks on the Windows server via RDP. Internally, we have a couple of diskless thin clients, and iMacs with RDP software installed. Externally, both Windows and Mac OS X clients connect to our 10.5 server IPSec VPN, and then to the Windows server, again via RDP.
Performance is acceptable, as here in Australia we now have ADSL service with 1-2Mbps upstream. On my 23" display (Mac OS X 10.5), situated 1200miles away, a RDP connection at 1280x1024 works seamlessly.
On the Mac Server side, we have recently upgraded to Leopard Server, and thus haven't implmented all the fabulous new features such as calendar sharing and wikis, but we are using network spotlight, and of course the Mail server. Additionally, we have a Fujitsu SnapScan which scans documents that are then automatically OCR'd, and made available by network spotlight. All very cool.
Further work to be undertaken;
- Have the Windows server logins authenticate with our Mac OS X Open Directory. Currently account credentials are duplicated.
- Implement public key cryptography for the VPN, so that we can revoke individual client VPN installations
- Implement two factor authentication (probably CryptoCard)
- Batten down the permissions on the Windows server. The default Quickbooks installation required an unacceptable level of user rights.

Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

Is it possible to install Lion on the second hard disk on my Mini (2010) Snow Leopard Server, and switch between Lion and Snow Leopard? I like those voices Lion has in speech.

When baltwosaid NO emphatically, that was described as CORRECT ANSWER. Ditto in the caeses of the radically different answers from Camelotand Matt Clifton
Could it be that CORRECT ANSWER needs better defining by Apple?
That apart, yes, switching might involve rebooting. About the voices, well, I was the other day adding voice to a commentary in a video I was working on. There's only American English accent in SL — Lion I believe has British ones as well.
Why not, I wondered, try to install Lion purely for academic interest, maybe with an SD card (Sandisk Ultra II, 16GB) as Tom Nelson says is possible at http://macs.about.com/od/macoperatingsystems/ss/Perform-A-Clean-Install-Of-Os-X- Lion-On-Your-Mac.htm

Snow Leopard Server and FCServer

Hi.
I'm running FCServer on an iMac, and I'm currently looking for the best solution for giving co-workers outside of our office network remote access to our FCS database. The main purpose for this is for remote users to screen and download episode segments and movies from our database.
I was initially thinking VPN would be the only solution, but then I saw Snow Leopard Server has 'Mobile Access Server' built right into the OS, which appears designed to help users avoid having to use a VPN.
Before I go out and buy SLS for the company, I want to be sure it will work. Am I correct that Snow Leopard Server, and the built-in Mobile Access Server, will allow users outside of our network remote access to our FCSrvr database?
Any help would be greatly appreciated. And if this question is better suited for a different forum please let me know as well.
Thank you!

Hmmm... Thanks for the replies.
I posted this question in the OS X Server forum and got this response:
+"I haven't used Final Cut Server, but I'm pretty sure the Mobile Access Server wouldn't work with it. MAS works with plain HTTP, and the Address Book, iCal, and Mail (SMTP and IMAP) services; but FCServer is only partly HTTP-based, and I don't think even the HTTP part will work due to how MAS authenticates HTTP clients. Also, you might be thinking about using MAS as the same computer as FCServer, and it won't work that way -- MAS needs to be on a separate (internet-facing) computer from the actual origin server (which should be firewalled from the internet).+
+I'd go back to thinking about VPN... "+
Can anyone offer any more insight into this for me? I'm just an audio/video post-production guy, so this is all a little outside of my training.
Any help would be greatly appreciated. Thanks!

SQUIRRELLY Leopard Server and Unable to Backup using Anything!

I upgraded from 10.4 to 10.5.2 Leopard server, and am having some difficulties that I can't resolve.
The server is running on an Intel dual core MacMini, and is primarily used for email. It isn't serving any webpages at the moment. The install was "from scratch" and not some kind of upgrade; only the mail was moved over from the previous server using Mail BFR.
I have been unable to backup the server in any way. I have tried:
• Superduper (2.5) which is how I backed up the previous server without problem
• Carbon Copy Clone
and now
• Time Machine
The first two would run about 2/3 the way thru, and the computer would "freeze" (mouse activity but nothing would work, required hard reset to recover). No logs available as the problem does not leave anything showing the problem.
Time Machine was tried today, and it ran about 1/2 the server (only 18GB) and kernel panic resulted (log below).
Tried all the usual troubleshooting methods; rebuild permissions, ran deep-cleaning, etc.
I hate to have to restart the whole process from scratch.
Thanks

That is definitely the intended operation sorry, this is done so that if you have encrypted the device no one can just plug your phone into a PC and pull all the data off.
Don't forget to mark posts that answers the topic as Accepted Solution.
If you find any post helpful, press Kudos.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Leopard server and windows users

We run a mac + pc environment with some users on macs, many on pcs, and our office server is a windows exchange for email etc. As a multi-location consulting firm, we need to set up a good collaboration system that is hosted internally (to preserve confidentiality) and allows us to create a web-based knowledge creation, sharing and collaboration environment. We have looked at some of the new web services offers, but all are hosted by the providers.
We are considering buying a mac leopard server and have the following questions:
1/ will windows users be able to use the wiki, chat, calendaring and podcast facilities from their laptops without any problems, and will they have the same easy user interface?
2/ does the wiki server enable group collaboration like:
2a/ sending out email notifications on new posts (without changing our exchange server)
2b/ allowing groups to create project and team specific areas
3/ The problem we face is one of adoption. If we can make this as easy as facebook, then lots of people will migrate within 48 hours. But is this possible with the leopard server?
4/ finally, we are based in Singapore and our offices are all in Asia? Do we need a lot of experienced Apple-savvy technical people to create any of these applications, or is leopard server as easy to use as a mac is for a home user?
Any thoughts or inputs would help. FYI, alternatives we are evaluating are jive software's clearspace or basecamp or zoho's web based suites.
thanks / Suresh
Message was edited by: suresh Venugopalan Shankar
Message was edited by: suresh Venugopalan Shankar

suresh Venugopalan Shankar wrote:
1/ will windows users be able to use the wiki, chat, calendaring and podcast facilities from their laptops without any problems, and will they have the same easy user interface?
Yes, the web based interfaces work just fine for both OS's, the chat server is using jabber (clients on about every OS) and the calendaring is using the standards based iCalendar format.
2/ does the wiki server enable group collaboration like:
2a/ sending out email notifications on new posts (without changing our exchange server)
2b/ allowing groups to create project and team specific areas
I don't know of functionality to send out e-mail notifications on new posts, but you can subscribe to RSS feeds of things posted in the blog section of the wiki server. I'd need a little bit more information to understand what you're looking for as far as creating project and team specific areas.
3/ The problem we face is one of adoption. If we can make this as easy as facebook, then lots of people will migrate within 48 hours. But is this possible with the leopard server?
On the front end most of this stuff is very easy to use, and is in my opinion even simpler than facebook and such.
4/ finally, we are based in Singapore and our offices are all in Asia? Do we need a lot of experienced Apple-savvy technical people to create any of these applications, or is leopard server as easy to use as a mac is for a home user?
It's pretty easy to set the server up as long as you read the documentation. There's also a lot of resources online if you have problems (like this forum). It would probably be helpful to have someone familiar with LDAP systems and at least some command line usage on the server, but like I said, the documentation is pretty good. You can go read it to get an idea at http://www.apple.com/server/macosx/resources/
Hope that helps out some.

Internal DNS server and NAT routing issue.

Hi -- I am not terribly experienced with DNS and I am running into an issue that I can't seem to resolve. My company.com DNS information is hosted by an outside ISP for email, web, etc... but I have configured an A record there to point to the public IP to my mac os x server (server.company.com).
We have a cisco router configured with one to one NAT from the public IP to the internal IP for our server in a 192.168.15.x subnet. The same router is running DHCP and and NAT on that subnet under a different public IP provided by our ISP.
Our server is running DNS with recursion and has a "company.private" zone set up for internal services and machine names. Thus, the server is accessible via "server.company.com" from the outside and "server.company.private" from the private LAN.
The problem is that I would like to be able to access some services simply via "server.company.com" both inside and outside the private network. Now, accessing the "server.company.com" services from the private lan does not work because the name resolves to the external IP and the external IP cannot be used internally due to NAT.
Is there a way to configure my internal DNS server to respond with the appropriate private address when receiving a query only to "server.company.com" and forward requests on for anything else on "company.com"?
I know that I could manually duplicate all entries for our domain from my ISP and host the same entries for internal clients, but it would be much easier to only have our server handle requests for itself. The server is running OS X Server 10.4.11.
Thanks

Is there a way to configure my internal DNS server to respond with the appropriate private address when receiving a query only to "server.company.com" and forward requests on for anything else on "company.com"?
Ordinarily, no. Once your server thinks it is responsible for a zone (e.g. company.com) then it will answer all queries for that domain and never pass them upstream. Therefore you'd have to replicate all the zone data, including all the public records, and maintain them both.
The one possible exception to this (I haven't tried) is to create a zone for server.company.com that has your internal address. In theory (like I said, I haven't tried this), the server should respond to 'server.company.com' lookups with its own zone data and defer all other lookups (including other company.com names since they're not in a zone it controls). Might be worth trying.

ICal server and external invitations via 3rd party mail server

Hi everyone,
OS 10.6.5 Server:
Services running
AFP
DNS
iCal
Open Directory
Push Notification
We are currently testing iCal server and have configured it to send out invites via our mail server (which is running on a different server) by creating the com.apple.calendarserver user on our mail server.
Email notifications are then configured under the Enable Email Invitations tab in the iCal service of Server Admin as follows:
IMAP
Email address: [email protected]
Incoming server: mail.mytest.com
Port: 143 (not using SSL)
Username: com.apple.calendarserver
Password: secret
SMTP: mail.mytest.com
Port: 25 (not using SSL)
Server requires authentication
Username: com.apple.calendarserver
Password: secret
My test OD users are able to send out invites both internally to other iCal users and externally via email.
So for example, I invite someone to a meeting and enter their gmail address ([email protected]), the invitation goes out correctly - when I log into gmail I see the invitation.
When responding to the invitation (clicking Yes), the mail server receives the response from gmail and the iCal server collects the message via IMAP.
However, the iCal server doesn't seem to parse the received email correctly as I get the following error in the iCal error logs:
[twistedcaldav.extensions#info] Cannot authenticate proxy user 'com.apple.calendarserver' without X-Authorize-As header
2011-03-03 17:44:03+1100 [-] [mailgateway] 2011-03-03 17:44:03+1100 [AuthorizedHTTPGetter,client] [twistedcaldav.mail#error] Mail gateway failed to inject message <[email protected]> (Reason: 400 Bad Request)
2011-03-03 17:44:03+1100 [-] [mailgateway] 2011-03-03 17:44:03+1100 [AuthorizedHTTPGetter,client] [twistedcaldav.mail#debug] Failed calendar body: BEGIN:VCALENDAR
2011-03-03 17:44:03+1100 [-] [mailgateway] VERSION:2.0
2011-03-03 17:44:03+1100 [-] [mailgateway] CALSCALE:GREGORIAN
2011-03-03 17:44:03+1100 [-] [mailgateway] METHOD:REPLY
2011-03-03 17:44:03+1100 [-] [mailgateway] PRODID:-//Google Inc//Google Calendar 70.9054//EN
2011-03-03 17:44:03+1100 [-] [mailgateway] BEGIN:VEVENT
2011-03-03 17:44:03+1100 [-] [mailgateway] UID:43121576-1183-40C8-82D8-A052754AD1CE
2011-03-03 17:44:03+1100 [-] [mailgateway] DTSTART:20110406T080000Z
2011-03-03 17:44:03+1100 [-] [mailgateway] DTEND:20110406T090000Z
2011-03-03 17:44:03+1100 [-] [mailgateway] ATTENDEE;[email protected];CUTYPE=INDIVIDUAL;PARTSTAT=DECLINED;RO
2011-03-03 17:44:03+1100 [-] [mailgateway] LE=REQ-PARTICIPANT;X-NUM-GUESTS=0:mailto:[email protected]
2011-03-03 17:44:03+1100 [-] [mailgateway] CREATED:20110303T062518Z
2011-03-03 17:44:03+1100 [-] [mailgateway] DESCRIPTION:
2011-03-03 17:44:03+1100 [-] [mailgateway] DTSTAMP:20110303T064335Z
2011-03-03 17:44:03+1100 [-] [mailgateway] LAST-MODIFIED:20110303T064335Z
2011-03-03 17:44:03+1100 [-] [mailgateway] LOCATION:
2011-03-03 17:44:03+1100 [-] [mailgateway] ORGANIZER;CN=com.apple.calendarserver+07b1c044-9d98-4cdc-afe3-48139218ee35
2011-03-03 17:44:03+1100 [-] [mailgateway] @mytest.com:urn:uuid:B72794FB-3242-48D7-AC22-A584D279B9F9
2011-03-03 17:44:03+1100 [-] [mailgateway] SEQUENCE:3
2011-03-03 17:44:03+1100 [-] [mailgateway] STATUS:CONFIRMED
2011-03-03 17:44:03+1100 [-] [mailgateway] SUMMARY:one more test
2011-03-03 17:44:03+1100 [-] [mailgateway] TRANSP:OPAQUE
2011-03-03 17:44:03+1100 [-] [mailgateway] END:VEVENT
2011-03-03 17:44:03+1100 [-] [mailgateway] END:VCALENDAR
2011-03-03 17:44:03+1100 [-] [mailgateway]
I have set a rule on our mail server to bypass any spam filtering for all messages sent to the [email protected] address, but this doesn't seem to make any difference.
Does anyone else have this working ? Any ideas ?
Many thanks
Message was edited by: gen_bunty
null

The issue is not "user authorization". The issue is that the 3rd-party service does not accept all incoming relay requests unless there is authentication with a registered account (which we have). This protects the 3rd-party service from becoming the relaying host for the universe's spoofed and anonymous spam. My deduction is that there is no mechanism in UTL_MAIL to designate not only the 3rd-party ip-address:port (by-passing the local sendmail server) but also providing the username:password for the account there for authentication.
Plan A: I have attempted to follow directions for client-side SMTP Authentication for Relaying on the sendmail.org site.
I have not been successful in completing a simple mailx interactive test, much less completing a UTL_MAIL configuration.
I am scouring the user universe for someone who has put all the pieces together successfully and can advise. . . .
Edited by: StevenInTallyFl on Mar 26, 2010 3:50 PM
to clarify that I cannot get from UTL_MAIL to 3rd-party IP directly

Leopard Wide-Area Bonjour DNS Issue

Hi, all. Got an issue with Leopard's domain name resolver. A while back, I was experimenting with the "use dynamic global hostname" panel in Sharing. I wasn't able to get it to do anything useful (and I don't want help with that; I know what went wrong, and how to fix it, but haven't gotten to do so yet), but here's the thing - after returning the settings to the defaults (unchecking the "use dynamic global hostname" box), it seems to have left something behind in my system configuration.
In particular, when I run "scutil --dns", I see the following two entries in addition to my normal DNS server and the "local" Bonjour resolver (domain names censored):
resolver #3
domain : bonjour.mydomain.com.
options : pdns
timeout : 5
order : 150000
resolver #4
domain : mydomain.com.
options : pdns
timeout : 5
order : 150200
The type of these is "pdns" - "private DNS", or wide-area Bonjour. They look harmless - but the fact that they're there is somehow preventing my machine from being able to resolve any hostname in "mydomain.com" that is a CNAME.
I can get rid of them temporarily by running scutil and removing the key "State:/Network/PrivateDNS" from the database... and then name resolution works normally again. But a reboot, or a change in Bonjour settings (such as enabling or disabling "Back to My Mac"), causes them to come back. I can't figure out how to purge them from the actual system configuration database. Any suggestions?

Here's the fix. Open Keychain Utility in the Utilities folder and choose "System" in the Keychains list in the sidebar. Now you'll probably see two entries of type "DNS Key" with the names "bonjour.mydomain.com" and "mydomain.com". Just delete those Keychain items and you should be back to normal.

Leopard, Leopard server, and time machine.

Okay. First of all, I spent about 30 minutes searching through all the time machine questions here and found nothing like it so I'm sorry if its a duplicate question, but it does seem rather unique.
I have an XServe G5 running leopard server with an 8TB external firewire 800 RAID array that was purpose purchased to act as a time machine backup destination for about 8 machines.
XServe has that drive set up to be the backup destination, everything there is OK.
Here is what happens on the OSX Leopard machines when I go to backup:
1. I open Time Machine preferences.
2. I click on the "Choose Backup Disk..." button.
3. It thinks for about 10 seconds
4. It brings up a list of about 3 possible destinations. I select the one I want "Backups (XServe G5)"
5. I press the gleaming "Use For Backup" Button.
6. It asks for the users name and password. Type away.
7. It comes back to the 'Time Machine Preferences" window. The little on/off switch turned off, and we're back at the "Choose Backup Disk...." button.
This occurs on each machine I wish to backup, be they Mac Pros, or macbooks.
Help?

Ladies and gentlemen, I have the answer.
I stumbled across this accidentally when I was playing desperately in the Finder trying to get some inspiration about this issue.
The problem doesn't lie in the clients... it lies in the Server.
Here is my solution:
1. In the finder, right-click on the external drive, and select "Get Info".
2. Under "General", there should be 2 little check boxes, "Shared Folder" and "Locked".
3. Click on "Shared Folder" to put an X in it.
Thats it!
For some reason Time Machine setup didn't share the folder and so the client machines recognised it as a shared time machine backup source, but couldn't actually find it on the network because it wasn't shared.
Have fun ladies and gentlemen!!

WLC Guest portal - External DNS issue

I have an interesting behavior. When my guest users attach to the guest network, I want them to use some external DNS source and not my organizations DNS servers. So, I set the dhcp scope options to point to other DNS Servers. When I do, the users don't seem to be redirected to the WLC guest portal, they get nothing and because of that, they cannot get to the Internet.
I am not sure why this is happening. The re-direction URL is https://1.1.1.1/login.html?redirect=www.google.com?/ocid=iehp
I don't understand why pointing a guest client to an external DNS servers would cause the guest login page not to come up.

The issue is likely that you are attempting to redirect an HTTPS page. See this link for more information:
http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wlan-security/115951-web-auth-wlc-guide-00.html#anc7
You didn't mention your code rev, but it seems that 8.0 is able to redirect HTTPS for guest portal.

External DNS issue

I installed LDAP on external DNS server.To resolve the LDAP server address all other hosts contact this host.Whereas this host it self is a external DNS server.It is not able to resolve for ldap server address.Could you please helpme in resolving this.I tried adding the LDAP server address in /etc/hosts file.But it doesnt help.
Thanks

I heard somewhere it is doable.
unfortunately I do not have the details and I have never tried it.
It go something like this.
create a new zone
install your ldap server into it
then the global zone can get the address from it.
sorry that is all I have
and I am not sure it will solve your problem

10.5.6 Update and External Monitor issues

I'm starting this new Thread in response to several people like myself who still cannot use an external monitor with a Macbook on this latest update. I did write to Steve Jobs about this issue and I received a call from Ireland assuring me that the graphics update would be incorporated into the new upgrade before Christmas. It clearly hasn't and, in the meantime, I replaced my hard-disk with a 320 Gb and installed Leopard up to 10.5.4 and was back in business. Now, I'm back to square one and can't use the monitor. So I will be writing to Mr Jobs again in the hope that someone takes notice that some of use Macs in a professional capacity. We're in a deep recession and the last thing we need right now are silly issues of this nature.
http://discussions.apple.com/thread.jspa?messageID=8631240#8631240

I'm not sure what to make of this at this point. I ordered a CTO 2.8GHz with 4GB RAM and 320GB HD the day they were announced. First week or so, few if any problems. Then the "UHF" like bands of static began to appear randomly. I use my computer 90% of the time driving an external monitor. I use a separate set up at home and work with duplicates of all cables. The problem occurs on both. I spoke with Apple Care - they patched me over to support and moved me up to Tier one pretty quick, even had me send in my System Profiler information for every combination of screen and graphics card. Then they emailed me a program to capture my monitor info again with every combination of screen and graphics card. No solution. They finally asked to "capture" my computer for their labs and sent me a new one.
Once again, about 2 1/2 weeks of smooth sailing and bam, same issues now occurring. If it's a driver issue, why is everything fine for so long? Also, 10.5.6 and the new firmware have failed to address. Given my above exchanges with Apple, they certainly can't claim they don't know about it.
I've been using Apple Products for a long time. I've seen some real buggy stuff - like when File Vault first came out but this is the worst I've experienced. Seems like poor quality control. If it's a select few machines, I appear to have won the lottery as I've had two of them.
I'm sure this issue is much more wide spread as it is a non-issue if you only use the internal display. Only people consistently driving an external display will even know there is a problem.

Leopard server and external DNS issues?

Similar Messages

Maybe you are looking for