Letter e with two dots above it

I am trying to write the correct spelling of Citroen, how do I get the letter e with the 2 dots above it.

type "alt+u", then "e".... gives ë ! or... Citroën even!
(BTW: "two dots" are called an "umlaut".)

Similar Messages

Topic: TCP/IP Message gets Appended with two dots...(Urgent)

Dear All,
I am working on a requirement where I am sendind a message
(underlying protocol used TCP/IP) using a program
developed using Java Sockets.
It sends the messgage on desired mechine and port but two dots(..)
gets appended with this message .
I am really not able to figure out from where these dots are coming ,
is it the network that appends these dots.
Any clue will be helpful.
An early response is highly appriciable.
Thanks and Regards
Dushyant Bhardwaj

You should use a BufferedWriter instead of a PrintWriter, since you're using a BufferedReader. these streams tend to work best in pairs. The readLine requires a newline, so
import java.io.*;
import java.net.*;
public class TestSW
        public static void main(String[]args)
                BufferedWriter output;
                BufferedReader networkBin;
                Socket socket=null;
                try{
                        socket = new Socket("127.0.0.1",5050); // connect to echo server
                        output = new BufferedWriter(new OutputStreamWriter(socket.getOutputStream()));
                        networkBin = new BufferedReader(new InputStreamReader(socket.getInputStream()));
                        output.write("testing");
                        output.newLine();
                        output.flush();
                        System.out.println(networkBin.readLine());
                }catch(IOException e){
                        e.printStackTrace();
                }finally{
                        if(socket != null){
                                try{socket.close();}catch(IOException ce){}
}

HT4623 Tried updating to IOS 7. Now my phone is stuck on a white screen with two dots and two dashes.

Tried updating my iPhone 4S with IOS 7. It is now frozen on a white screen with two black dots and two black dashes. It will flip to another screen once in a while that says "Slide to setup." But when I do, it goes back to the screen with the dots and dashes.

What happened with your phone? I'm experiencing the same problems at the moment.

How to type an e with an ' over it or an o with two dots of it.

I'm putting a title in my home movie and in the "Staring" portion I have names with an e that is supposed to have an ' over it and one name with an o with I need to put to dots over it. How do I do this?

I was hitting Option e and not the ' key. It still shows up as ' in multiple programs. None have it show up with e with ' over it.
If you are pressing OPTION-e and OPTION-e then all you will end up with is an apostrophe. As stated above, press OPTION-e and e (no OPTION key for the second press). I tested this in iMovie '08 using the default font associated with the "Transparent - Black" title option (i.e., the Helvetica Neue font with default encoding for the application) and it works fine for me.

Incorrect behavior in App-V Sequencer if contains filename beginning with two dots ".."

I'm trying to sequence a package that has a file named "..a". (don't ask me why they named it this way...)
When trying to save this package, the App-V sequencer will say it has encountered an error and the package was not saved.
To reproduce, simply try creating a new package, and create a new empty file and rename it to "..a" (extension included). When you try to save the package, the error should pop up.
It looks like the leading double dot might be confusing the sequencer into somehow treating it as a file in the parent directory, because under the package editor it shows the file as having an empty name, and being outside of the AppVPackageRoot folder.

It is reproduced easily - but this is the first app that I have ever heard of that does this. You could possibly open a case with Microsoft.
Steve Thomas, Senior Consultant, Microsoft
App-V/MED-V/SCVMM/Server App-V/MDOP/AppCompat
http://blogs.technet.com/gladiatormsft/
The App-V Team blog: http://blogs.technet.com/appv/
The MED-V Team Blog: http://blogs.technet.com/medv
The SCVMM Team blog: http://blogs.technet.com/scvmm/
“This posting is provided "AS IS" with no warranties, and confers no rights. User assumes all risks.”

Problem keep getting the eye and two dots

Sound like many people are haven the same problem and no reply back from Verizon yet.
Cell phone sit there, and goes into this mod, "Eye with two dots" on the display. Lock the cell, and after some time, does a reboot.
I removed the battery, and thought cold restart, came back to the same spot, lock.
Fix from store outlet: told to reboot the software and prior to that, remove all the items..
sound like a long shot, how come no feed backf rom Verizon IT people.
Jayme

Hey there Jayme!
If we have many people having the same issue, I appreciate you speaking up a bit more. Let's see what's going on here. Let me clarify, while your phone is idle, it will randomly come up with a screen with an eye and 2 dots, correct? Then it will turn off and back on? If that is what's going on, a hard reset and erasing all information is probably the best step. This issue may be caused by an application or possibly something in the software. Reverting back to the way it was out of the box can determine this.
I also apologize about not getting back to you until now. This is a peer-to-peer forum and we only interject when the question isn't answered by one of our lovely community members. Please feel free to contact us on Facebook or Twitter @vzwsupport. Thanks!
MichelleG_VZW

MAC PRO (Early 2008) RAID CARD ISSUE - SYSTEM FREEZEHello (hopefully someone can shed some light on my issue) I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i m

Hello (hopefully someone can shed some light on my issue)
I own as above a MAC PRO (Early 2008) this has a RAID card installed along with two 15k.7 cheetah hdd (320gb) and a spare drive, (which i made a regular drive)
a while ago i had to replace the RAID card battery, so i did this, over a year later the same thing happened again, but as previous just left it and the system seemed fine for ages, until last night i was working in PHOTOSHOP and everything just froze and the screen kind of appeared GREEN, could not do a single thing. So restarted the mac, this time grey screen for ages and a message appeared, (macs version of blue screen) (see attached).
I restarted the machine and this time a flashing question mark folder!
could not do a thing.
so i found my copy of snow leopard and got the computer to run this and at least launch the DISK UTILITY and (Interestingly in the drop down menu RAID UTILITY was also in the menu) but it did not matter which utility i used the (RAID or DISK) neither could see any of drives, just the dvd drive.
so looked around on you tube and various forums and discovered if i take out the RAID CARD and re-plug the main lead from the RAID card back in to the LOGIC BOARD I would be reverting the MAC to a normal regular non-RAID computer.
After performing this HARDWARE task and inserting all three HDD, and running the DISK utility from the drop down menu via the SNOW LEOPARD disc.
(interestingly since the RAID card had been removed the RAID UTILITY from the drop down menu no longer appeared). running disk utility I can now only see the regular (spare) hdd and DVD Drive, but the two RAID HDD , again, still do not show up DISK UTILITY?
O.K. so i could chuck out the RAID card (AND RAID HDD) and just go with a regular set-up, and run a back restore from Time Machine on a NEW hdd purchased.
but what is wrong with the RAID, is the card at fault or are both HDD used for the RAID knackered? can i perform any tests, to see whats what?
thanks for your help in advanced.

hello people, the issue was in fact the GRAPHICS card nothing to do with the HDD or RAID system ( although this did cause issues with the RAID system it basically lost its way) below is my replay to another similar problem some one else had!
working in photoshop and then everything stopped working and the lot froze! only option was to force shutdown (via button).
and try to restart, hoping all was fine, this was not the case :-(
I had the added issue of the RAID card system, that i have, this was confused to say the lease and would not behave or work, causing the start up to hang.
so i thought the HDD must be bust and the root cause. ( but soon learnt it was not the cause )
...bought a new HDD removed the RAID card and replugged the cable from RAID card into LOGIC board, ( making the computer act like any normal non-RAID system). I managed to install the OSX, using the snow leopard disk way. once the mac was running, i started to notice the screen would flicker and started to see 'artefacts'. so i started to reveal my symptoms to the web and forums and soon discovered that my graphics card could be the issue all along?.
(nvidia geforce 8800gt 2x dvi).
I read up on that a fix, could be either A. reply the thermal paste, as the card could be over heating or B. stick the card in the oven trick.
Tried option A. first and nothing still issues, so last night took the plunge carried out option B. and ta da it worked! i even managed to run
from my new HDD my lasted install OS X, absolutely fine. I then thought, maybe i could repair my RAID so replugged all the HARDWARD back in and
carried out a disk repair and disk permissions on drives( took a small amount of time), via the SNOW LEOPARD disc - (Disk utilities) and this worked and now have my system working as it was just over 6 days ago.
what was the cost to get this? bought a new hdd so 40.00gbp and thermal paste and cleaner kit ( your still need to do this ) search video card trick on you tube.
and renew thermal paste, approx 15.00gbp, technically i don't need the new HDD, but it was all part of the trial and error way i went. ( i do have extra storage as a result!)"

I am working with two computers in my profession (Mac/PC). I want to download testversions, lets say Premiere Elements 13, for Mac and PC using my adobe login. Is this possible?

I am working with two computers in my profession (Mac/PC). I want to download testversions, lets say Premiere Elements 13, for Mac and PC using my adobe login. Is this possible?

Sure. Elements is cross-platform, anyway.
Mylenium

For All Entries with two tables

Hi All,
         Can we use FOR ALL ENTRIES with two tables. for example
SELECT * FROM MKPF INTO TABLE T_MKPF
         WHERE BUDAT IN S_BUDAT.
SELECT * FROM MARA INTO TABLE T_MARA
         WHERE MTART IN S_MTART AND
                        MAKTL IN S_MAKTL.
SELECT * FROM MSEG INTO TABLE T_MSEG
       FOR ALL ENTRIES IN "T_MKPF AND T_MARA"
              WHERE MBLNR EQ T_MKPF-MBLNR AND
                             MATNR EQ T_MARA-MATNR.
can we do it like this or any other way to do this plz tell. I waitting for your responce.
Thanks
Jitendra

Hi,
u cannot do like this....chek some documentation on it..
1. duplicate rows are automatically removed
2. if the itab used in the clause is empty , all the rows in the source table will be selected .
3. performance degradation when using the clause on big tables.
Say for example you have the following abap code:
Select * from mara
For all entries in itab
Where matnr = itab-matnr.
If the actual source of the material list (represented here by itab) is actually another database table, like:
select matnr from mseg
into corresponding fields of table itab
where .
Then you could have used one sql statement that joins both tables.
Select t1.*
From mara t1, mseg t2
Where t1.matnr = t2.matnr
And T2..
So what are the drawbacks of using the "for all entires" instead of a join ?
At run time , in order to fulfill the "for all entries " request, the abap engine will generate several sql statements (for detailed information on this refer to note 48230). Regardless of which method the engine uses (union all, "or" or "in" predicates) If the itab is bigger then a few records, the abap engine will break the itab into parts, and rerun an sql statement several times in a loop. This rerun of the same sql statement , each time with different host values, is a source of resource waste because it may lead to re-reading of data pages.
returing to the above example , lets say that our itab contains 500 records and that the abap engine will be forced to run the following sql statement 50 times with a list of 10 values each time.
Select * from mara
Where matnr in ( ...)
Db2 will be able to perform this sql statement cheaply all 50 times, using one of sap standard indexes that contain the matnr column. But in actuality, if you consider the wider picture (all 50 executions of the statement), you will see that some of the data pages, especially the root and middle-tire index pages have been re-read each execution.
Even though db2 has mechanisms like buffer pools and sequential detection to try to minimize the i/o cost of such cases, those mechanisms can only minimize the actual i/o operations , not the cpu cost of re-reading them once they are in memory. Had you coded the join, db2 would have known that you actually need 500 rows from mara, it would have been able to use other access methods, and potentially consume less getpages i/o and cpu.
In other words , when you use the "for all entries " clause instead of coding a join , you are depriving the database of important information needed to select the best access path for your application. Moreover, you are depriving your DBA of the same vital information. When the DBA monitors & tunes the system, he (or she) is less likely to recognize this kind of resource waste. The DBA will see a simple statement that uses an index , he is less likely to realize that this statement is executed in a loop unnecessarily.
Beore using the "for all entries" clause and to evaluate the use of database views as a means to:
a. simplify sql
b. simplify abap code
c. get around open sql limitations.
check the links
http://www.thespot4sap.com/articles/SAPABAPPerformanceTuning_ForAllEntries.asp
The specified item was not found.
Regards,
Nagaraj

Help me on HSlider with two thumbs

Hi Friends,
I have a problem with HSlider. I am working on a slider with two thumbs. I have a requirement to overlap two thumbs. But the problem with overlapping is i can slide in reverse also. I need to restrict that. Please suggest me solution and save my time.
I will explain with example:
I have a slider to select classes from 1 - 12. For this i am using HSlider with two thumbs.
Now a user can select class range between 1 - 12. i.e., 5-6 or 8-9 or 2-9 etc..
I am giving an option to select 1-1 or 4-4 or 5-5 by overlapping the thumbs.
Now the problem i am facing is : user can select 9-5 or 6-1 or 5-3 etc, because i am giving chance to overlap thumbs.
But i have to restrict that behaviour... The user should not be able to select reverse.
I tried to Override getSnapValue method to restirct that behavior. But it is not working as expected. Please suggest me a solution for this. Please share me if you have any example which is having same or similar behavior.
Thanks,
Venu S.

Hi Bhasker,
Thanks for immediate response.
Here is my code:
package
import mx.controls.HSlider;
import mx.controls.sliderClasses.SliderThumb;
import mx.core.mx_internal;
use namespace mx_internal;
public class CustonSlider extends HSlider{
public function CustonSlider (){
override mx_internal function getSnapValue(value:Number, thumb:SliderThumb = null):Number{
if (!isNaN(snapInterval) && snapInterval != 0){
var val:Number = getValueFromX(value);
trace("value min max val "+value+" "+minimum+" "+maximum+" "+val);
//if (thumb && (thumbs.numChildren > 1) && !allowThumbOverlap)
if (thumb && (2 > 1) && !allowThumbOverlap){
var check_bounds:Boolean = true;
var bounds:Object
bounds = getXBounds(thumb.thumbIndex);
var prevThumb:SliderThumb =thumb.thumbIndex > 0 ?
//SliderThumb(thumbs.getChildAt(thumb.thumbIndex- 1)) :
SliderThumb(getThumbAt(thumb.thumbIndex- 1)) :
null;
var nextThumb:SliderThumb =
//thumb.thumbIndex + 1 < thumbs.numChildren ?
thumb.thumbIndex + 1 < 2 ?
//SliderThumb(thumbs.getChildAt(thumb.thumbIndex + 1)) :
SliderThumb(getThumbAt(thumb.thumbIndex + 1)) :
null;
if (prevThumb){
bounds.min -= (prevThumb.width / 2);
trace("bounds.min "+bounds.min);
// check if thumb is at minimum, if not we can ignore the bounds logic
if (val == minimum)
if (getValueFromX((prevThumb.xPosition - prevThumb.width/2)) <= minimum)check_bounds =
false;}
else
if (val >= minimum)check_bounds =
false;}
if (nextThumb){
bounds.max += (nextThumb.width / 2);
trace("bounds.max "+bounds.max);
// check if thumb is at maximum, if not we can ignore the bounds logic
if (val == maximum)
if (getValueFromX((nextThumb.xPosition + nextThumb.width/2)) >= maximum)check_bounds =
false;}
else
if (val <= maximum)check_bounds =
false;}
trace("check_bounds : "+check_bounds);
if (check_bounds)val = Math.min(Math.max(val, getValueFromX(Math.round(bounds.min)) + snapInterval),
getValueFromX(Math.round(bounds.max)) - snapInterval);
return getXFromValue(val);}
return value;}
I am calling the above snippet in my application.
But it is not working as i expected. Let us consider two thumbs as left thumb and right thumb, the left thumb should not move to right and rite thumb should move to right thumb. I can achieve this functionality if i set the boolean property "allowThumbOverlap" to false. But if i did this i cannot select range between 1-1 0r 4-4 or 9-9 etc. I have to give a chance to select range between 1-1 or 4-4 or 9-9 etc
Message was edited by: SVenu_2703

Working with two buttons in jsp

hi
My working with jsp's in struts.
I have a jsp with two buttons "Save" and "Delete".
My requirement is, on clicking either the "save button" or "Delete button" in jsp, it should call the corresponding code in the Action class.
wht is the logic required to call the corresponding code in the Action class ?
Thanks

hi
Thanks nani and jHyena for ur reply , but its not working, can u tell me where i went wrong, how to set them in jsp and action class.
This is my Action class
public class EditUserDetailsAction extends Action {
      * Generated Methods
      * Method execute
      * @param mapping
      * @param form
      * @param request
      * @param response
      * @return ActionForward
     public ActionForward execute(ActionMapping mapping, ActionForm form,
               HttpServletRequest request, HttpServletResponse response) throws DaoException {
               System.out.println("---------------in execute() befor try/catch-----------");
//**************************the problem is here calling in if()/else, how should i call i?**************
      if() {
                try{
                    EditUserDetailsForm editUserDetailsForm = (EditUserDetailsForm) form;
                    System.out.println("------------ execute()-----------------");
                    DaoImplementer daoImpl = new DaoImplementer();
                    Integer editUid       = (Integer) editUserDetailsForm.getUser_Id();
                    String editName       = (String) editUserDetailsForm.getName();
                    String editTitle      = (String) editUserDetailsForm.getTitle();
                    String editEmail      = (String) editUserDetailsForm.getEmail();
                    Integer editTelephone = (Integer) editUserDetailsForm.getTelephone();
                    String editUserName = (String) editUserDetailsForm.getUserName();
                    String editPassword   = (String) editUserDetailsForm.getPassword();
                    daoImpl.registerUser(editUid, editName, editTitle, editEmail, editTelephone, editUserName, editPassword);
                    System.out.println("------------sent to model components---------------");
                    System.out.println("----------forwarding to edituserdetail.jsp----------");
                    return mapping.findForward("editUserDetails");
               catch (Exception e) {
                    System.out.println("@@@ ---Exception in EditUserDetailsAction class--@@@@");
                    throw new DaoException("Error adding userDetails: ",e);
               return mapping.findForward("addUserDetails");
Here is the jsp
<html:html locale="true">
<head>
    <html:base />
    <title>editUserDetails.jsp</title>
    <script type="text/javascript">
         function save_display(){
              var x = confirm("Save: Are you sure ?")
              if( x == true ){
                   confirm("Save: OK")
              else{
                   text("Save: Cancelled")
         function delete_display(){
              var y = confirm("Delete: Are you sure ?")
              if( y == true ){
                   confirm("Delete: OK")
              else{
                   alert("Delete: Cancelled")
         function funSave(){
              document.form[0].ID.value = id;
              form[0].ID.value.action="<%=request.getContextPath()%>/division/editDesignation.app?save=save";
               form[0].ID.value.method="post";
               form[0].ID.value.submit();
         function funDelete(){
              function funSave(){
                    document.form[0].ID.value=id;
                    form[0].ID.value.action="<%=request.getContextPath()%>.app?save=save";
                    form[0].ID.value.method="post";
                    form[0].ID.value.submit();
    </script>
     <meta http-equiv="pragma" content="no-cache">
     <meta http-equiv="cache-control" content="no-cache">
     <meta http-equiv="expires" content="0">
     <meta http-equiv="keywords" content="keyword1,keyword2,keyword3">
     <meta http-equiv="description" content="This is my page">
     
</head>
<body>
<html:javascript formName="editUserDetailsForm"/>
<html:form action="/editUserDetails" onsubmit="return validateEditUserDetailsForm(this);">
               user_Id : <html:text property="user_Id"/><html:errors property="user_Id"/><br/>
                  name : <html:text property="name"/><html:errors property="name"/><br/>
                 title : <html:text property="title"/><html:errors property="title"/><br/>
            telephone : <html:text property="telephone"/><html:errors property="telephone"/><br/>
                 email : <html:text property="email"/><html:errors property="email"/><br/>
             userName : <html:text property="userName"/><html:errors property="userName"/><br/>
             password : <html:password property="password"/><html:errors property="password"/><br/>
                       <html:submit property="save" value="Save" onclick ="funSave()"/>
                       <html:cancel property="delete" value="delete" onclick="funDelete()"/>
</html:form>
</body>
pls let me know how to set the hidden variables within the above jsp .
and in Action class how to call it.
I would be very thankful to u guys.
Thanks

GTS BP with two adress numbers.

Hi All,
I am facing with an issue that a BP is assinged with two address numbers. Ideally it should be one with our case .
It was tranfered from ECC and for a ECC customer master only one adreess number can be exist.
The 2nd adress was changed from ECC but unfortunatly instead of updating the existing one , it created one more adress line in GTS .
When I checked in BUT020 table for this BP two adresses are assigned and no external adress for either of both add. numbers.
I tried with other sample customer masters but neither able to re-create nor the cause of the issue.
Kindly help by suggesting any check points , settings..Let me know if any other information is needed.
Thanks ,
Raj KB .

Hi Raj,
I have seen a similar issue before but on a larger scale.
The previous incident was caused by a number range overflow that was not solved in the correct manner.
Instead of correcting the problem in GTS first, the master data was re-transferred again from ECC in an attempt to overwrite the incorrect data.
But because the number range was not corrected in GTS first the re-transfer created a lot of inconsistent entries in the BUT020 and ADRC tables.
The attempted solution caused an incorrect relationship between ADRC and BUT020 for the (over 350k) BPs involved.
This may not be the case in your scenario but it's the only root cause I can think of without having access to you system.
Please inquire about the number ranges if the above sounds familiar.
Going forward you should run program /SAPSLL/BP_ADDR_CLEANUP from SE38 in simulation mode to see what gets picked up.
Best Regards,
Eoin

I have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3

i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4

Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns

WinXP with two users - can we have two separate iTunes, one for each user?

Question: On my Dell WinXPPro SP3 desktop with two users (myself and my wife), can each user have a separate iTunes - so what each of us does with iTunes has no effect on the other?
Details: Yesterday, June 29 2012, I bought a new iPad 3 with WiFi only, my first Apple product. My #1 motive for buying it is to copy movie files (avi, m4v, mp4, etc.) from my WinXP setup (PC plus hard drive) to my new iPad to watch the movies in bed on the new iPad. I understand that I shall need to install iTunes on both the iPad and the PC in order to move or copy the existing movies from the PC side to the iPad. (I also understand that I won't be able to use iCloud because iCloud will not run on WinXP, only Vista and Win7.) [By the way, if iTunes will NOT help me do what I want to do, please let me know. But that is not my question.]
I am only one of two users on the PC. My wife is the second user on the PC. She already installed iTunes on the PC for her own use. She is an avid iTunes user. Most of the time, she does not use this PC. She has her own WinXPPro SP3 Dell laptop, which is what she uses 99% of the time. She has also had an iPod for some time, hence her use of iTunes. And now, for the last two weeks, she also has a new iPhone 4S and her own iPad. So her use of iTunes will grow. The important point is the following - whatever I do on my side, I do not want to interfere with or disrupt her use of iTunes. Not even for a second.
So, can I install or re-install or somehow set up iTunes on MY user on the PC so that it does not in any way use or affect her iTunes? If the answer is "yes", please give me a step-by-step and list all details. Is there a YouTube that shows this specifically?
More details: Right now, in C:\Program Files, before I have tried to install anything myself, there are already folders for Apple Software Update, iPod and iTunes, which derive from my wife's installations of these Apple programs some time ago. I have just now run the Apple Software Updater, which first updated itself on this PC to version 2.1.3.127 and then updated her iTunes on this PC to version 10.6.3.25. (As a result, the following processes/services are now running, which normally don't run when I am the user:
C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe
C:\Program Files\iPod\bin\iPodService.exe
C:\Program Files\iTunes\iTunesHelper.exe
Also, the following processes will launch the next time I reboot this PC (which normally don't launch when I am the user):
C:\Program Files\Common Files\Apple\Apple Application Support\APSDaemon.exe
C:\Program Files\iTunes\iTunesHelper.exe )
My wife says her iTunes is NOT set for Family Share. (That sounds correct to me, for now and forever.)
Summary: So, how do I install iTunes for myself (for the first time) for my user on this PC so it does not - even for a second - interfere or affect my wife's use of her iTunes on all of her devices?
Thanks !!!

Mr. Wiclee - thanks for the link.
When I said I had not "installed" iTunes on my iPad, I suppose I meant I have not yet signed in to iTunes, ever. I suppose when I sign in to iTunes the first time on my new iPad, I will be required to create a new iTunes account? Then refer to such new iTunes account when I launch iTunes for the first time on my PC as myself? Or will I still need to use Method Three in your link?
The crucial thing is this - when I turn on iTunes on the PC for the first time with me as User, I do NOT want it to connect to my wife's iTunes account. On my PC, I would want iTunes to ask me who I am, so I can then sign in with my new iTunes account that I had just created on my iPad. How can I be sure to accomplish this goal?
In my PC, if I look at Documents and Settings and compare the two folders for we two different users, one for me and one for my wife, I can see that my wife's has Application Data and Local Settings for her various Apple programs. However, so do I in my User even though I have not yet installed any Apple programs on my side. I am concerned that when I finall launch iTunes when I am user, it will open up in my wife's iTunes account, which I truly want to avoid.
Thanks. Please advise.

One MIRO document with two different vendors for two different line items

Can it possible to make MIRO for a PO which is having two conditions(Basic price+Freight) with two different vendors.
MIRO document needs:
GR/IR Clearing    Dr.
Freight Clearing Dr.
Vendor RM(X)         Cr.
Vendor Freight(Y)   Cr.
Is it possible to post the above document at a time not individually for each condition.

Hi,
Yes, It is possible to post Material and delivery cost in one document.where in material supplier is different than the Frieght vendor.
Itm PK BusA Acct no.   Description                    Tx     Amount in   USD
001 89       130001     Stock-Ingredients               244 0            880.00
002 96       320001     GR/IR Account - Ing.            244 0          1,200.00-
003 86       520002     Ingredients - PPV               244 0          3,297.87
004 50       320008     GR/IR Account - Duty            244 0            797.87-
005 50       320009     GR/IR Account - Fre.            244 0          2,180.00-
Thanks
Dinabandhu

Letter e with two dots above it

Similar Messages

Maybe you are looking for