Report to find total absences of all the employees for 2006

we have to find the total absences of all the employees for the year 2006. is there any good report to do this job

If u wnt absence data then u can create query in SQ01.
or
Hope thts wht u wanted ,pls change the code accordingly as per ur need,just refer it as demo code -
REPORT  ZGILL_ABSDATA                           .
tables: pa2001.
data: begin of itab occurs 0,
      Pernr like pa2001-pernr,
      Subty like pa2001-subty,
      begda like pa2001-begda,
      endda like pa2001-endda,
      ABWTG like pa2001-ABWTG,
      KALTG like pa2001-KALTG,
      end of itab.
start-of-selection.
select pernr subty begda endda abwtg kaltg  from pa2001 into table itab
where begda ge '20060101' and
endda le '20061231'.
if sy-subrc eq 0.
write:/2 'Emp No',
       12 'Abs Type',
       18 'Start Date',
       28 'End Date',
       40 'Abs Days',
       50 'Calen Days'.
loop at itab.
write:/2 itab-pernr,
       12 itab-subty,
       18 itab-begda,
       28 itab-endda,
       40 itab-abwtg,
       50 itab-kaltg.
clear itab.
endloop.
else.
message i000(000) with 'No data found'.
endif.

Similar Messages

  • Maximum limit of total length of all the characters for a custom OM infotyp

    Hi,
    Can anyone let me know whats the maximum limit of total character length for a OM infotype.
    I need to create an OM infotype using PPCI Tcode.
    When I am defining the HRI Structure....when total length of all the field is exceeding 900 I am unable to create infotype....I want to confirm whether it is some configuration problem or whether max limit set by SAP is 900 ?

    Hi,
    The max length of infoobject is 60
    for more info
    Re: Creating OM infotype
    /people/sap.user72/blog/2006/05/27/long-texts-in-sap-bw-modeling
    Thanks!
    Edited by: M Prasanth on Jan 19, 2009 1:01 PM

  • I've seen all the posts for fixing the wifi on the 4s, none of them work!  So, who can tell me why my iPhone 4S cannot find any wifi when it used to easily, and when it does it can never connect?

    I've seen all the posts for fixing the wifi on the 4s, none of them work!  So, who can tell me why my iPhone 4S cannot find any wifi when it used to find wifi, and when it does find a wifi network it can never connect?  You think apple would have a clue how to fix it!  Because turning the wifi on and off doesn't work, resorting network settings doesn't work, even restoring phone to factory default doesn't work...

    Did not work. I've selected iMessage to ON and left it. After a few hours I recieved a message "activation unsuccessful. Turn on iMessage to try again". This has been going on for the past 3 days.

  • Where can I find a guide to all the options and settings available via the "about:" pseudo-URL? (Using FF 3.6.8)

    When I last used Firefox support, several years ago, I saw mention of a long list of options and settings available, using a kind of local URL, beginning with "about:". I can't find it now. The text "forums" that I saw then seem to have disappeared and been replaced by support for dummies who might be frightened if they saw a page containing more than just a tiny amount of information.
    The question is: where can I find this guide, listing all the available options and settings so that I can make my own decisions?

    I must have forgotten; it wasn't exactly FF support, but Mozillazine. '''Thank you for the pointer'''. The "long list" I was thinking of was in fact about:config, which is pointed to by that page.
    Given all that, I think it should be easier to find Mozillazine from the FireFox support pages.

  • In the Itunes Wishlist there is no price button that you can psuh to buy the items. So I cant buy my whole wishlist without doing it all seperatly and I dont know the total price of all the items. Please help!

    In the Itunes Wishlist there is no price button that you can push to buy the items. So I cant buy my whole wishlist without doing it all seperatly and I dont know the total price of all the items. Please help!

    Both the button and the total cost appear to have been removed in the current version of iTunes - I don't have them either and other people have posted about it as well. You can try leaving feedback for Apple and maybe they'll be added back in a future update : http://www.apple.com/feedback/itunesapp.html

  • How to find out all the OKCODEs for a particular screen?

    I am working on t-code CL20N and trying to record with t-code SHDB, in the second screen when I press enter it is coming out, but when I run CL20N without SHDB it is going through all the screens perfectly, SHDB is not working for CL20N.
    Is there any other way to find out all the OKCODEs for a particular screen/s?

    Hi,
    First look for any push button or menu item which can take you to the second screen instead of hitting enter directly in tcode CL20N . If any such button exist in the TCode, u can use the same button in SHDB also for moving to the  second screen.
    Thanks,
    Rajinikanth G

  • Total amount of all the items of invoice at document level to present ....

    We have two cubes one is sales document count cube (header data) and other one is sales transation cube (item level data) . Invoice net val is there in sales document count cube and profit center, principal and item category is ther in sales transation cube.
    our requirement is ,total amount of all the items of invoice at document level to present along with principal, profit center & item category.
    This has to be done in the document count cube and not the transaction cube.
    note: multi provider is not solution. There any solution at query level?

    hi
    If your using 2 ODS one for header and one for Item to 2 Cubes.....
    Then just create a update rule between Item data ODS to Document CUbe mapping the new keyfigure ( Net value of total of all items in sales order )
    If not tel me how the cubes and ODS are fed the data
    Assign points if useful
    Regards
    N Ganesh

  • How to find out what are all the change pointers assoicated for an idoc ??

    Hi ,
    How to find out what are all the change pointers activated for an idoc ??
    Thanks,
    Varma

    Verma,
    You can check what are the active Change Pointers for the message type in tcode <b>BD50</b>
    Use tcode <b>BD61</b> to check whether change pointers are active or not??
    Hope this helps..

  • Is it possible to find all the documents for a serial number ?

    Hi all,
    I'm using materials with serial numbers in complaints.
    Is it possible to find all the documents for this serial number ?
    Is it possible to check if this serial number is allready in use in any document ?

    Hi Mengelkemier,
    I think you're posting in the wrong forum.  This forum is intended to be used to discuss virtualizing Exchange Server on the the vSphere platform.  The question you're asking seems to be a mobile device specific question.
    You would probably get better visibility posting on a forum dedicated to your particular device.  And for what it's worth, some devices will let you sync all of your email and others will only let you sync a certain amount.  It's dependent on the device you're using.
    Good luck in finding your answer.
    Matt

  • Where can I find a retail copy of MAC OSX Snowleopard, that has all the drivers, for both desktop and Laptops?

    Where can I find a retail copy of MAC OSX Snowleopard, that has all the drivers, for both desktop and Laptops?

    No. 10.6.3 was the last retail release of Snow Leopard. Download the 10.6.8 Combo updater and put it on a flash drive to make it easier to install the largest part of the update.
    Also, don't push the same disk image of SL to your Macs unless they are exactly the same model as it was originally installed on. The wrong hardware drivers will otherwise be in use.

  • Siri can not find my location and all the other apps do not even

    siri can not find my location and all the other apps do not even
    iPad 3 IOS 6.0.1

    Do you have a wifi signal?  In order for the wifi only iPad to get any location fix, it needs to be connected to a wifi node - it's only way to determine locations is by looking up the wifi networks hardware address in Apple's wifi node location database of approximate locations (as mentioned already, it has no GPS chipset to use GPS location data).

  • Hi, I have the new mac, and I cant find how to download all the audiobooks I've purchased, I've gone to purchased, but they are no where to be seen,m can anyone help. Robert

    Hi, I have the new mac, and I cant find how to download all the audiobooks I've purchased? I've gone to purchased, but they are no where to be seen,m can anyone help. Robert

    You cannot redownload audiobooks at all.  The audiobook industry does not allow this.
    As always have been the case, you should copy everything from your old computer, or your backup copy of your old computer, to your new one.

  • How to find total recs in a local table for a particular condition

    Hi,
    How to find total recs in a local table for a particular condition?
    Thanks,
    CD

    Well, you may want to try this as well, and compare to the LOOP way.  Not sure what kind of overhead you may get doing this way. Here ITAB is our main internal table, and ITAB_TMP is a copy of it.  Again I think there may be some overhead in doing the copy.  Next, delete out all records which are the reverse of your condition.  Then whatever is left is the rows that you want to count.  Then simply do a LINES operator on the internal table, passing the number of lines to LV_COUNT.
    data: itab type table of ttab.
    data: itab_tmp type table of ttab.
    itab_tmp[] = itab[].
    delete table itab_tmp where fld1 <> 'A'.
    lv_count = lines( itab_tmp ).
    Regards,
    Rich Heilman

  • Find the Employees for whom Manager is not available

    Hi
    I wish to find all the Find the Employees for whom Manager is not available?
    Can anyone Pls throw some light how I can?
    Regards,
    Sreeram

    Hi
    Get all the Positions without "A002 - Reports" Relationship from table HRP1001 (excluding A002 from input screen).
    After finding the positions, get ee no.s for those positions from table PA0001.
    Hope this helps.
    Best Regards
    Reddy

  • % distribution of all the employees in a particular org unit

    Hello To all,
    I am working in Objective Setting and Assessments, I am having a one reporting requirment where I need to show % distribution of all the employees in a particular org unit. I kept 0ORGUNIT in row and Keyfigure 1ROWCOUNT in column,
    I have created a formula for % distribution of all the employees -> %GT " No. fo Records"
    I am bit confused that weather i should take %GT or %CT, %RT
    Wt is difference between that formulas.
    Kindly suggest
    Thanks
    Shalini

    Hi Shalini,
    %CT gives the share of the result, for example in a Regios if you have 10 employees then for each row it gives the employee share for that Region.
    %GT gives the share of the result from the Grand Total, for example if you have 10 regions then it caluculates each row it gives the employee share from all the Regions Grand Total.
    %RT gives the share from the Report Result for each employee.
    In your case you need to use the %GT, then for each region result area it gives % of distribution of all the employees.
    Hope this helps.
    Veerendra.

Maybe you are looking for

  • How to disable AutoCommit at DataSource level for 9.2

    Hi, I am trying to persist my JMS messages into timesten datastore for which connection received from timesten needs to be with AutoCommit disabled. Any idea how to do it in Weblogic 9.2 admin console/JDBC data source level? Thanks, Alan

  • Extractor for Purchase Prices?

    Hi all, We would like to use the new extractor for Purchase Prices (Retail) named 0RT_PURCHPRICE_PUORG_ATTR in BI Content 7.03. However, I got issue in activating this data source in BI 7.0. I am wondering if any other BI experts have experiences. An

  • Trouble Setting up Flickr from iPhoto '09

    I already have a Flickr account and I want to send photos from iPhoto to Flickr. When I click on an album and then on the Flickr button, iPhoto asks me if I'd like to set up iPhoto to publish to Flickr. I press "Set Up", which sends me to the Flickr

  • Disk Utility DVD+R DL Burn Error..Please Help

    I am trying to burn my backup image of Retail OS X Leopard 10.5.6 onto a DVD+R DL so that I can re-format my macbook because I have been experiencing some issues lately. The image is verified but about half way through the disk writing process, it sa

  • My problems after update 10.7.4

    I can't burning cd in my mbp after update 10.7.4 but can read other cd and I can't find external display when I connect it... without restart my mbp bad things