Liaisons dynamique nicppaiu.dll

Hello,
I have just changed my PC and I re-install Microsoft Visual Studio 2003 and Measurment Studio 8. But when I try to run a application(working on my older PC) I have this message:
Le point d'entrée procédure? ***** est introuvable dans le bibliothèque de liaisons dynamique nicppaiu.dll
and my application doesn't launch !
Can someone help me ?
Thank you

Hi,
Does it work if you start a new program from scratch? Which version of OS do have ? Is it the same one as before ? Are you using any NI devices ?
Have you already tried to re install your softwares ?
Regards,
Alexandre M. | Certified LabVIEW Developer
Embedded and Control Systems Engineer (NI France)

Similar Messages

"Le point d'entrée de procédure sqlite3_wal_checkpoint est introuvable dans la bibliothèque de liaison dynamique sqlite3.dll"

Bonjour,depuis hier j'ai à l'ouverture de mon ordinateur le massage suivant
"Le point d'entrée de procédure sqlite3_wal_checkpoint est introuvable dans la bibliothèque de liaison dynamique sqlite3.dll"

Try uninstalling your MobileMe control panel.

J'ai un problème avec safari, il ne veut pas s'installer complètement.J'ai le message d'erreur suivant : "Le point d'entrée de procédure ?nullptr@@3Vnullptr_t@std@@A est intouvable dans la bibliothèque de liaisons dynamique JavaScriptCore.dll."

J'ai désinstallé complètement safari plusieurs fois et réinstallé plusieurs fois sans succès idem pour java.
Je ne trouve pas la solution, si quelqu'un peut m'aider ?

Oui merci je venais juste de trouver l'info et je confirme que la version dans mon dossier n'était pas à jour comparée à celle présente dans le dossier "system32"! Problème résolu
Merci!

Updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error

updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error. Tried suggested steps
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Still getting same error message. Can anyone help me

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Missing entry point in nicppaiu.dll

Hi:
I'm porting a data acquisition program froim Visual STudio 2003 to 2010. I have all the legacy support installed. When I try to run (debug) I get the following error and my program never starts. The referenced entry point is something that I don't use.
The dialog is attached as It won't let me put it inline.
The version of nicppaiu.dll that I have is dated 6/18/2009 3:14pm and is 917k.
I do have a different project ported that uses NI libraries, but not DaqMx and that runs just fine (uses some of the NI variables and the excel and report classes).
Do I have something installed incorrectly?
Phil reaston
Attachments:
error dialog.rtf ‏641 KB

Hello.
I have a same problem of "nicppaiu.dll".
Please let me konow how can I solve the problem of "Doesn't exist a file of nicppaiu.dll" when I try to execute an application.
My environment is VS2010 with MStudio 2013.
Thank you.

On my computer when I turn it on I get this response - The procedure entry point squilt3_wal-checkpoint could not be located in the dynamic SQLite3.dll

On my computer when I turn it on I get this response - entry point squilt3-wal-checkpoint couldnot be located in the dynanamic SQLite3.dll.
Thahks for any help

Hi whatsthe77,
Welcome to Apple Support Communities.
You may want to follow the steps in this article to reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Have a great day,
Jeremy

Le point d'entree de procedure AVCFPlayerEnableHardwareAcceleratedVideoDecoderkey est introuvable dans la bibliotheque de liens dynamiques AVFoundationCF.dll

Suite à mise à jour d'Itunes, au démarrage j'ai ce message d'erreur malgré plusieurs réinstallations et l'install du service pack 1 pour windows7 j'ai encore ce message d'erreur.
Quelqu'un a-t-il rencontré ce problème?
merci

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Le point d'entrée de procédure DeleteCtrlArrayItem est introuvable dans la bibliothèque de liens dynamiques cvirte.dll

Bonjour
Je résume rapidement mon problème : J'utilisais CVI8.0 tout fonctionnait bien, jusqu'au jour où nous avons voulu passer à CVI13.0...
Le projet anciennement compilé sous 8.0 fonctionnait parfaitement bien et depuis il m'est impossible de seulement le lancer!
Une fois la compilation terminée avec la mention "build succeeded" le message d'erreur en pièce jointe apparaît...
Lorsque je lance un debug (32) j'ai le même message qu'en Release (32) sauf que "DeleteCtrlArrayItem" est remplacé par "CmtGetLockEx"?? et bien sur sans fonctionner car suite à cela l'application me dit que l'executable ne peut pas être lancé et se ferme...
Si quelqu'un y peut quelque chose, merci d'avance pour vos retours!
Attachments:
DeleteCtrlArrayItem.png ‏144 KB

Oui merci je venais juste de trouver l'info et je confirme que la version dans mon dossier n'était pas à jour comparée à celle présente dans le dossier "system32"! Problème résolu
Merci!

Depoliement d'une application mobile sous oracle 9i lite

hi all
pls i will explain my problem in french.
j'ai installer oracle 9i server et oracle9i lite ( mobile server) sur le même poste correctement. j'ai aussi installé le developpment kit sans problem. ensuite j'ai créé une base de donné lyno.odb dans le, repertoire OLDB40 et une DSN lyno accedant à cette base. j'y ai créé une table TASK. j'ai publier mon application dans le referentiel du mobile server avec succès.
j'ai crée un utilisateur TOM et configurér parfaitement. le problem est le suivant: à partir d'un poste de mon intranet, je veux télécharger un client "TOM". losque la synchro commence, j'ai bien contact mobile server qui fait 100% et lorsque synchrinize application data comment, je reçoie le message d'érreur suivant:" le point d'entrée de la procedure okcreateDsnEx est introuvable dans la bobliothèque de liaisons dynamique olobj40.dll".
pouvez-vous me venir en aide en m'expliquant pourquoi cet erreur et comment rectifier??
c'est la premiere fois que je déploie une apllication mobile avec webtogo.
cher Gourou je compte sur vous.
merci d'avance.
Lyno le novisssss

Publish the VB application
Create a user
Grant ACL to the user/application
Sync the client
This will create a mobile database and download the VB files to your PPC device. See Developer Guide for Windows CE for more information

Shockwave player v12 on mac has stopped Director player from working. Why?

Hello. I'm a very longstanding Adobe user, but a complete newcomer to the forum.
My problem? We have a suite of e-learning courses which are built in Flash, but which use a Director player (11.5) to launch them from CD-Rom. The new release of shockwave player (version 12) has stopped our courses working on a mac. We tried rebuilding the player file with Director 12, but this didn't resolve the problem. Can anyone help? Thanks.

Hi
We are in the same case. Since 1999, we have also built an e-learning suite on CD with Director 5 to 11.5 for Mac and Windows. And now, we have some problems with Shockwave 12 on OSx 10.7.
On Windows 8, there was already an error with shokwave: " L'ordinal 1265 est introuvable dans la bibliothèque de liaisons dynamique IML32.dll "
. It was enough to delete two files: « IML32.DLL » et « DIRAPI.DLL ». See on Adobe site :
http://www.macromedia.com/fr/support/director/ts/documents/sw10_restart.htm
Per haps, its the same case. We look for a solution...
Best regards
Jean-Luc

XMP and Python (also DLL compilation help needed)

Has anyone tried using the XMP SDK through Python? I know python fairly well, but not C++. I would like to code in python if possible.
From what I have gathered I have a few options:
1. Use Python's built-in 'ctypes' methods (not sure if this will only work with C as opposed to C++)
2. Use Boost
3. Use Sip
Does anyone have any experience with any of these (or any other solutions)?
The current route that I am experimenting with is using ctypes. For this to work I will need to compile the XMPCore and the XMPFiles projects into .dll's (as opposed to the default .libs). I have seen quite a few posts on this forum asking how to go about doing this, but have found no answers. I have been able to succesfully compile a .dll for XMPCore but not for XMPFiles. I am using Visual Studio 2008 and cannot figure out how to compile XMPFiles without producing errors such as:
2>WXMPFiles.obj : error LNK2019: unresolved external symbol "void __cdecl XMP_EnterCriticalRegion(struct _RTL_CRITICAL_SECTION &)" (?XMP_EnterCriticalRegion@@YAXAAU_RTL_CRITICAL_SECTION@@@Z) referenced in function "public: __thiscall XMPFiles_AutoMutex::XMPFiles_AutoMutex(void)" (??0XMPFiles_AutoMutex@@QAE@XZ)
2>TIFF_Handler.obj : error LNK2001: unresolved external symbol "public: virtual __thiscall TXMPMeta<class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > >::~TXMPMeta<class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > >(void)" (??1?$TXMPMeta@V?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@@@UAE@XZ)
These are the steps that I have taked:
1. Download and add the Quicktime SDK, Expat XML Parser, and Zlib libraries to the proper folder paths
2. Open the provided XMPToolkit.sln in VS8
2. Build > Build Solution. Produces two static libraries, XMPCoreStaticDebug.lib and XMPFilesStaticDebug.lib. (This works! ... but I want dll's)
3. Change the properties of the XMPCore and XMPFiles projects:
Configuration Properties -> General-> Configuration Type: Dynamic Library (dll)
4. Clean Solution; Build Solution
This results in many errors. Most of which are like the two listed above.
Anybody have any advice /input in regards to using python with the XMP SDK and/or compiling these two libraries into .dll's ?
Thanks for any help!!!

I you have installed the java runtime engine then put the j3D libraries in that drectory tree in the jre\lib\ext directory, and .dll`s in the bin directory. I you have not installed the jre then do so. That will create the java.library.path you need. to run java programs. Each compiler has its own procedures for running an app from the IDE, check your docs if that`s what you are doing.
regards

Xerces-c_3_0.dll is missing

I haven't been able to start Adobe Encoder CC as a Stand alone or from with in premiere CC. I get can't start because xerces-c_3_0.dll is missing error. I uninstalled like it says and redownload then reinstall after a reboot. I've done this process twice.

What version of AME CC are you running?
Was this working fine and then one day all of a sudden this started?
The only time I have seen this happening is with an Antivirus app thinking that Adobe DLLs are viruses (which they are not) and quarantining them. For some reason they especially like to pick on Dynamic Link DLLs which is communication DLLs between Adobe apps. So check out antivirus application and see if one of them have done this. Also let us know if that is the case and what antivirus app you have and we can try to talk to that company to help resolve this.

Writing DLL operating on complex arrays

Hello,
I'm writing Dynamic Library (DLL) which should operate on complex matrix, and I have a problem with function parameters.
My target is DLL which uses FFTW libraries for calculating Fast Fourrier Transformate on complex signals given by matrix.
How should I define function? I make it on many ways,
extern "C" __declspec(dllexport) int fast_fourrier(fftw_complex * in, fftw_complex * out, int size)
extern "C" __declspec(dllexport) int fast_fourrier2(complex * in, complex * out, int size)
extern "C" __declspec(dllexport) int fast_fourrier3(TD1Hdl input, TD1Hdl output);
where TD1Hdl is
typedef struct {
long dimSize;
complex elt[1]; (or cmplx128 elt[1]; )
} TD1;
typedef TD1 **TD1Hdl;
There's only one method which works:
extern "C" __declspec(dllexport) int function(double * re, double * im, double * re_out, double * im_out, int size);
But it's very time-consuming, because I must build another dynamic matrix and write into data from re and im. After calculating FFTW I must separate data onto re_out and im_out. But I think must be easier way to do this, but I'm don't now how to do this.
I'm don't know how to get into the data elt in structure TD1Hdl whitch is used by LabView when calling function on array 1D, type double 8-bytes by Array Handle. I can easily read the dimSize when we connecting to Call Library Function an array, but any modification on substructure elt crashes LabView. I think, that elt is pointer for first element of the matrix but maybe I'm wrong.
I show, that we can also pass a parameters by something like "Adapt to type", which is prototyped by function (void * arg1) and I have absolutely no idea what can I do with this param.
Maybe anybody has writed a external DLL operating on complex array and can help. I'll be grateful for any advices.
Best regards,
Darek

OK, Something has moved forward.
I used this declaration:
extern "C" __declspec(dllexport) int fast_fourrier(TD1Hdl in)
where TD1Hdl is previously used structure. Similar code was generated when I tried "Create .c file" in LabView on Call Library Function Node set for Adapt to type.
LabView correctly passes array size, I have access to fields Im and Re of structure complex, I can write and read them but something is wrong with value conversion between LabView and DLL.
It looks like somewhere was difference in pointers, and pointer on first field of matrix wasn't it, but moved some bytes in any direction. I think that, because when I'm write to array in re and im fields the same value - for example 0.5 in LabView I get that there's about 2.5 E-234.
In next try I filled this matrix with sine function values in loop:
re = sin(2*i), im = sin(2*i+1). In worst way I should get set of values from range [-1,1] on the graph, but I get 0 or value which exceed 1.0E+100.
Could it be caused by compilator version? I'm using Borland C++ Builder 6.
I'm very thankful for interesting of this problem.
Darek

PLUGIN.dll

When I want start PSE11 the message here appears:
Le point d'entrée de procedure HandleWindowFont est introuvable dans la bibliothèque de lien dynamique PLUGIN.DLL
and PSE11 dont start.
I reinstalled PSE11 without success.
Thanks for your help

Do one thing. Press Shift key while you launch Photoshopelementseditor.exe. Do not leave the keys until a dialog box appears asking you to skip loading third party plugins. Press "YES". Reply back if PSE Editor starts after that.

Error while trying to connect to a remote SQL Server DB using multiconnect

As part of our business process, we need to connect to a SQL Server DB external to SAP.
We have done the following:
1. We set up an ODBC connection on our SAP sandbox server to the external SQL server DB.
Name: sdsdev
Connection string: sdsdev\sqlexpress2008
2. We tested the ODBC connection from within ODBC and it works perfectly
3. Using transaction: DBCO we have set up a DB connection known to SAP that we can use in ABAP to retrieve the data.
    It was set up with exactly the same parameters as with the ODBC.
    We used the following connection string so it would know to use the ODBC DBSL profile parameters, with the DSN name
being the same as defined in the ODBC: See below ...
    DB connection: AR_INTERFACE
    DBMS: MSS
    User Name: ARTransfer
    Password: ******
    Conn info: MSSQL_DSN=sdsdev
4. We also made sure we installed the DBSL dynamic library (DLL) on the R/3 system server.
5. We ran a small test program to test connectivity ... as below ...
     exec sql .
         connect to 'AR_INTERFACE'
     end exec.
     right after the above command we check the system log for status. It failed with the following message:
B Wed Feb 09 14:40:40 2011
B Connect to AR_INTERFACE as ARTransfer with MSSQL_DSN=sdsdev
MSSQL_DBNAME=ARTransfer
C Thread ID:3900
C dbmssslib.dll patch info
C patchlevel 0
C patchno 118
C patchcomment Problems with the use of literals in non-unicode
systems (1524929)
C np:(local) connection used on SAPS101B
C OpenOledbConnection : CoCreateInstance failed. rc: 8007007e.
C failed to establish conn to np:(local).
C Retrying without protocol specifier: (local)
C OpenOledbConnection : CoCreateInstance failed. rc: 8007007e.
C failed to establish conn. 0
B ***LOG BY2=> sql error -1 performing CON [dbds#2 @
1056] [dbds 1056 ]
B ***LOG BY0=> <message text not available> [dbds#2 @ 1056] [dbds
1056 ]
The connection failed !
We used all of the information found in OSS Notes we could find.
Has anyone had this problem before ? Is there something obvious we are missing in all this ?
Thank you for your assistance.

Is this Excel or Access? If Excel, try this.
Sub ADOExcelSQLServer()
' Carl SQL Server Connection
' FOR THIS CODE TO WORK
' In VBE you need to go Tools References and check Microsoft Active X Data Objects 2.x library
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "EXCEL-PC\EXCELDEVELOPER" ' Enter your server name here
Database_Name = "AdventureWorksLT2012" ' Enter your database name here
User_ID = "" ' enter your user ID here
Password = "" ' Enter your password here
SQLStr = "SELECT * FROM [SalesLT].[Customer]" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & _
";Uid=" & User_ID & ";Pwd=" & Password & ";"
rs.Open SQLStr, Cn, adOpenStatic
' Dump to spreadsheet
With Worksheets("sheet1").Range("a1:z500") ' Enter your sheet name and range here
.ClearContents
.CopyFromRecordset rs
End With
' Tidy up
rs.Close
Set rs = Nothing
Cn.Close
Set Cn = Nothing
End Sub
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

Liaisons dynamique nicppaiu.dll

Similar Messages

Maybe you are looking for