Missing entry point in nicppaiu.dll

Hi:
I'm porting a data acquisition program froim Visual STudio 2003 to 2010. I have all the legacy support installed. When I try to run (debug) I get the following error and my program never starts. The referenced entry point is something that I don't use.
The dialog is attached as It won't let me put it inline.
The version of nicppaiu.dll that I have is dated 6/18/2009 3:14pm and is 917k.
I do have a different project ported that uses NI libraries, but not DaqMx and that runs just fine (uses some of the NI variables and the excel and report classes).
Do I have something installed incorrectly?
Phil reaston
Attachments:
error dialog.rtf ‏641 KB

Hello.
I have a same problem of "nicppaiu.dll".
Please let me konow how can I solve the problem of "Doesn't exist a file of nicppaiu.dll" when I try to execute an application.
My environment is VS2010 with MStudio 2013.
Thank you.

Similar Messages

Missing entry point kglttr after 8.1.7.0 to 8.1.7.4 upgrade

Hi,
After upgrading from 8.1.7.0 to 8.1.7.4 on Windows 2000 server, when I try to start the Oracle service for a SID, I get an error message that the procedure entry point kglttr cannot be found in orageneric8.dll.
The installation was done using a silent install. The user id had full administration rights. The silentInstall.log file indicated a successful completion of the installation. The server was rebooted after the installation.
Any suggestions? I've got a customer site where I need to do this ASAP, and I can't turn the process over to them until I get this fixed...
Thanks,
Garth

Why?To fix some bugs and to enhance your performance
How?Download the 8.1.7.4 patchset from metalink
Regards
Laurent

Zennw32.dll missing entry point

Hi,
I have a couple of machines that are displaying the above error message
when they log in. This only affects about 2 or 3 computers at a time
and happens quite rarely in the past but now more frequently.
the Pc's are imaged from a bulk image and all of the other machines are
running fine.
I've searched for duplicates of the zenlite.dll as was suggested in
other posts but found only one in \program files\novell\zenworks (which
is also set in the environment variables).
Any suggestions would be much appreciated.
Thanks,
Gary.

Thanks Dave,
I'll have a look at that when I get the chance, problem is that
somebody's taken my test machine and re-imaged it.
It'll pop up again though I'm sure.
Gary.
Dave Parkes Wrote:
> With the Zfd6.5 agents on Win98, you get that error when the
> Windows\system\ziswin*.* and zislib*.* files don't get copied over
> correctly by the install, so I'd check those between a working and non
> working set up
>
> Cheers Dave
>
>
> --
>
> Dave Parkes [NSCS]
> Occasionally resident at http://support-forums.novell.com/

"ZENNW32.DLL is misssing the entry point nwappLoadOD."

We are getting the error
"ZENNW32.DLL is misssing the entry point nwappLoadOD."
I have found this in some other threads in this forum, but they did
not go
in a useful direction for me. This error message is appearing on a
WinXP Pro
workstation before the NWgina appears after boot up. Zen policies are
not
working.
The history of this error is that we installed SP1b on ZfD 4. We thenupdated our workstations from client 4.83 to 4.9 and afterwards the
Zen
agent to the MSI version shipping with SP1b. I have tried deleting the
installpath registry key as suggested in TID 2967507 and also followed
the
other suggestions. No luck. I also think I got the same error at some
point
after rolling back from 4.9 client to 4.83, without updating the
agent.
ZfDagent.msi will install fine on a clean machine that has not had the
previous version of the agent or client installed and policies will
work.

> interesting, someone else has reported this problem, but it looked like
> a terminal server issue.
I also found a few thread with this on the forum, but they were with
Win98 or 2k on the workstations, and we have XP, so the client is
different. Also, their problem was different, and the error message about
the missing entry point was just another one of their symptoms. My
problem is that the agent is not working on my XP workstations and I
cannot apply policies or register a workstation (which I can do with the
new wstations where we never had client 4.83 or the Zfd4 agent installed,
and also on our Win98 workstations).
> I'm still not clear on the exact sequence;
Ok, we had client 4.83 and Zfd4 installed. All was well re policies etc.
We updated to SP1b with Zfd, then we updated all our clients from 4.83 to
4.9. Then we deleted the InstallPath key in the registry, uninstalled the
Zfd4 agent and installed the .msi version tht comes with SP1b.
> If so, what options did you choose with client 4.9 during install?
The tech who did the client upgrade tells me that when she did a custom
install of 4.9 (with the old management agent present), she didn't get
the ZfD options in the client she used to get with 4.83. There was only
one box which was ticked and greyed out (i saw this too when I was
playing around). But I have since discovered, that when I took the
management agent off and then uninstalled 4.83 and installed 4.9, I had
all the ZfD options to tick I had with 4.83.
> Have
> you tried 4.9sp1a?
We did try it on a few machines, but found that a staff member who logs
in on lab machines as xxxxx.staff could not log in on the patched
clients. When we put the 'staff.' into the context field in the advanced
section of the login and only his username at the top, it worked! We
tried this on all the patched client machines and it happened on all of
them (I won't be upset if you don't believe me, it's too weird for
words!).
I'll try patching the client and see what happens when I update to
the .msi agent.
Thanks for your help, Shaun.
Renate
>

What do I do when I try to open Fifrefox 4 & get the message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll?

2 days ago, I got a message about upgrading to Firefox 4.0. I didn't do it immediately, due to lack of time. Later that day, I tried to open Firfox & got the message: Firefox can't start because xul.dll is missing. Reinstall the program to fix this. I tried several times to open Firefox & got the same result. I tried rebooting. Same result. So I opened Internet Explorer & went to the Firefox website & followed the instructions to download Firefox 4. After that, I used it last night & left my laptop hibernating last night, then continued to use it this morning. Then I closed Firefox. When I next tried to reopen Firefox, I got the new message: The procedure entry point NS_SetDllDirectory could not be located in the dynamic link library xul.dll. Again, I can only access the internet with Internet Explorer. Also, I have a done a good many Windows updates over the last 2 days as well. What can I do to get Firefox to open? Thank you for your help.

This is what I did to resolve this problem. First, I uninstalled Firefox 4 & removed the Firefox folder left behind. I made sure to NOT select the option to delete personal information. Next, I backed up all of the important files on my computer. Next, I upgraded my Windows 7 to Service Pack 1, which was pending in my updates folder. Then, I went to Mozilla's website & downloaded Firefox 4 again, making sure to select only the Firefox browser and not Thunderbird too. http://www.mozilla.org/ When prompted to close any open programs, I closed Internet Explorer (which I had used to get to the Mozilla website) and I disabled my Norton anti-virus. I then completed the installation & it works just fine now. It loaded all of my personal data, such as bookmarks, it remembered my password, etc. It's fine for my needs, as I'm not a heavy user of special add-ons & plug-ins. Some of those may not work yet with the new version.

The procedure entry point QTCF_CFHTTPMessageSetHeaderFieldValue could not be located in the dynamic link library QTCF.dll.

The procedure entry point QTCF_CFHTTPMessageSetHeaderFieldValue could not be located in the dynamic link library QTCF.dll.
I installed iTunes, then quicktime. After I installed quicktime, I began seeing this pop up everytime I opened iTunes.
iTunes works, this just appears everytime I open it.
I completely uninstalled every apple software on my laptop, then reinstalled everything.
Nothing happened, still the same.
Windows 7
64Bit

Hi,
I have exactly the same problem as the OP. To answer some questions:
I only have one copy of QTCF.dll.
It is in the correct place.
I have deleted it and repaired QT to replace it several times.
I have tried different versions of QT.
Win 7 Pro 64
I ran SysInternals MS Process Monitor to see what was going on. All programs which call this DLL were looking for it in their root directory, which suggested to me that the registry entry was either missing or corrupt, so...
I ran Regsvr32 on the dll and received the following Windows message:
"The module "qtcf.dll" was loaded but the entry-point DllUnregisterServer was not found. Make sure that the "qtcf.dll" is a valid dll or OCX file and then try again"
Now I'm out of ideas.
Cheers,
Tony

Entry point not found msvcr110.dll error

I have Photoshop CC and Lightroom CC both of which were working fine until I installed a PIE Primefilm XA scanner with CyberviewX software. The programs will not open since ibstalling CyberviewX. The following error appears: PSCC has a Photoshop.exe-Entry Point Not Found (The procedure entry point_crtCreateSymbolicLinkW could not be located in the dynamic link library MSVCR110.dll. Any help would be much appreciated. This error only seems to be associated with CS CC and LR CC.

Had the same problem with Lightroom 6. This solved the problem
The Program can't start because MSVCR110.dll is missing from your - Microsoft Community

I get "command.exe entry point not found" NSSUTIL_DoModuleDBFunction dynamic link library softokn.dll :windows8.1 64bit, tried reset and fresh install but NG

I am using a 64bit fresh installation of windows 8.1 laptop with the latest 27.0.1 version of firefox. I have been getting start up error messages. The messages claimed that each of nss3.dll, mozglue.dll,plc4.dll,plds4.dll could not be found in windows. I found a good fix explanation on a site where I could download these missing files and copy them to the system folders on windows (in sytstem32 and sysWOW for 64 bit) Each time the error message popped up the next dll file missing and most recently the message has changed to “ command.exe entry point not found” NSSUTIL_DoModuleDBFunction dynamic link library softokn.dll As I can find no reference to this on the net I was hoping you might be able to shed some light on the problem.
I have tried reinstalling and I have also tried the reset option in troubleshooting but the problem remains after restoring my FF backup settings. A completely fresh installation does remove the problem but the first installation of a new extension add on (but seemingly not plug-in) and the problem returns regardless of which add-on.

I posted this question after the best part of 2 days trying to eliminate this, admittedly small but, irritating error. Some hours later I note the problem has gone away which I think is most likely down to a clean-up job done by the WiseCare 365 software.

What does this message mean on my PC " the procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQlite3.dll.

Why does this message pop up on my PC after i start up " (AppleSyncNotifier.exe-Entry Point Not Found ) the procedure entry point sqlite3_wal_checkpoint could not be located in dynamic link library SQlite3.dll. ? What can I do to fix this problem ?

Found this several months ago when I updated ITunes. I don't know why they still haven't fixed this, but I had to do this again yesterday 10/13/2011 when I updated.
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.

Crystal Reports 2008-Vista-ERROR-crw32.exe Entry Point Not Found in dll

Hi Experts,
I just installed the Crystal Reports 2008 (with SP0) on my Vista (Home) machine. When I try to start the CR 2008, I am getting the below error message:
Error Title: crw32.exe - Entry Point Not Found
Error Message: The procedure entry point ?PrintLegend@CMapXLegend@CSLib300@@QAEXJJJJJ@Z could not be located in the dynamic link library cslibu-3-0.dll
Here are the things I tried to resolve the above problem:
1) Uninstall and Reinstall the CR 2008. - No change.
2) I configured the DEP to accept Crystal Reports (Performance - Advanced - DEP allow).
None of these seem fix the problem.
Can you please help me kick start the Crystal Reports 2008?
Thanks,
Arun

Please try with this:
Run a command prompt as administrator. From the start menu, select "All Programs", then "Accessories" and right-click on the "Command Prompt" shortcut and choose "Run As Administrator". From here you can use the following command to disable Data Execution Prevention (DEP) with the following command:
bcdedit.exe /set nx AlwaysOff
Keeping your command prompt open, run your setup or other process being stopped by DEP. Then, to turn it back on again, do the same and run the following:
bcdedit.exe /set nx AlwaysOn
Regards,
Shweta

Help! I keep getting the following message: the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

Hi,
Since downloading the updated version of itunes around May this year I have had the following problems:
1. This error message appears when my windows account launches:
the procdure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
2. I can't play any of the files in my itunes library. An error message appears indicating it can't find the files.
3. When I plugged my iphone in to update it was corrupted and I have lost all 7000 + songs.
You can guess that I am not a very happy bunny with itunes at the moment!
Please, can anyone suggest how to sort this lot out. I am aware that I've probably lost the ipod songs, but I need to get rid of the error message and be able to play the songs on from my library. I've been without since May now and I'm wondering whether to even bother getting it sorted, but I have quite a few albums purchased on itunes that I don't want to lose!
Thank you for your time.
Michelle

Thank you. I'm going to investigate saving my itunes library to the icloud and then re-trying the Stellar Phoenix recovery now the error messages have gone. If the Stellar doesn't work then I will try the advice in your link. I really appreicate the help you've given me - at least I have my itunes library back! I'm kind of resigned to re-loading my CDs back on - something to keep my busy in the winter months!
I'll let you know how I get on, but it will probably be a few days.I'm not very technical so I have to wait for my husband to get in from work to help me with this side of things. He's been busy working on the Olympics, so I he hasn't had much spare time for a while!
Michelle

Can LabVIEW call a DLL built with VS(2005) C++ with /CLR and Without an Entry Point

My project requires me to convert a C++ program to a DLL and having it called by LabVIEW. Due to the complexity of this C++ program (converted from fortran using f2c -C++ option), it cannot be compiled without using /clr option. I did build the application standalone (/clr), and it functioned fine. When I build it into DLL using VS2005, I was forced to use No Entry point option and without using DllMain in the C++ code. Eventually the DLL was built without error. But after I call it from LabVIEW, I was not getting calculated results as expected. I added a testing function to the C++ code of the DLL and just try to modify a parameter, it will not, but only return the input numbers. I was passing data by pointer and not by value, so I expect this parameter output be modified. I suspect that the DLL didnt get executed at all as it has no entry point specified.
Am I on the right track to approach this task, or I am heading to totally wrong direction here? I believe due to the fact that my C++ was from f2c and use vsf2c.lib and so on, the code is managed code, so that a regular DLL cannot be built from it with an entry point. How can LabVIEW call such a DLL? Am I right on that? I really need your advice here for a right approach to this problem and possible implementation "watch outs"...Thanks!
Bryan

Hi...Finally I was able to compile my code with an entry point defined and without using /clr. I can also call this DLL from LV and got back a variable from a little test function added to the DLL. But the function that was used for my main application in the DLL crashed LV and I got a pop up box from Microsoft Visual C++ Runtime Library: Runtime Error! "This application has requested the Runtime to terminate it in an unusual way, please contact the application's support team for more information". In Visual Studio I also got the following message: (I eliminated most of the "No symbols loaded" messages that are not errors but just info.) I would apprciate if someone can take to look with your more "experienced eyes", many thanks! Bryan.
'LabVIEW.exe': Loaded 'C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2180_x-ww_a84f1ff9\comctl32.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\xpsp2res.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\Shared\nicont.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\Shared\NICONTDT.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\nitaglv.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\lkbrow.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\lkrealt.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\lvdaq.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\lvdesktop.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\lvfp.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\mfc71.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\MFC71ENU.DLL', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\vi.lib\FieldPoint\SubVIs\FPLVMgr.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\lvfprt.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\LvProjectProxy.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\LvRealTimeCoreProvider.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\MVEProvider.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\QtCore4.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\QtXml4.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\QtGui4.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\mxLvProvider.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\nimxlcpp.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\nimxlc.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\Providers\variable.mxx', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\Framework\lvMax.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\MAX\UI Providers\FieldPoint71.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\MathScriptParser.dll', Binary was not built with debug information.
'LabVIEW.exe': Loaded 'Z:\bli\development\projects\galfitDLL\Debug\galfitDLL.dll', Symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.762_x-ww_6b128700\msvcr80.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\Program Files\National Instruments\LabVIEW 8.5\resource\mesa.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\mscms.dll', No symbols loaded.
'LabVIEW.exe': Loaded 'C:\WINDOWS\system32\icm32.dll', No symbols loaded.
The thread 'Win32 Thread' (0xf94) has exited with code 0 (0x0).
The thread 'Win32 Thread' (0x90c) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xfd0) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x284) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xdac) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xa98) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x528) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x614) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xa5c) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xebc) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x5cc) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x700) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xcf0) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xc7c) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x4c8) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0xa4) has exited with code 3 (0x3).
The thread 'Win32 Thread' (0x52c) has exited with code 3 (0x3).
The program '[804] LabVIEW.exe: Native' has exited with code 3 (0x3).

Entry point not found for js32.dll

Dear Friends,
I am trying to connect to a Domino server using NRPC (Native call based) connection. I have added Notes Client path in PATH variable (double checked this). My machine is W2k and Java version 1.4.2.
The following is the code which I am trying to run and getting erorr as,
"The procedure entry point JS_NewStringCopyN could not be located in dynamic link library js32.dll". I've use Dependency walker tool to ensure that js32.dll contains the specified function. May I know what's going wrong here?
Thanks,
Ketan
import java.util.List;
import java.util.Vector;
import lotus.domino.Database;
import lotus.domino.Document;
import lotus.domino.NotesError;
import lotus.domino.NotesException;
import lotus.domino.NotesFactory;
import lotus.domino.NotesThread;
import lotus.domino.Session;
import lotus.domino.View;
import lotus.domino.ViewEntry;
import lotus.domino.ViewEntryCollection;
public class TestNRPCConnection {
    //session variable
    protected Session session = null;
    //database variable
    protected Database dominodb = null;
     * Constructor which accepts all the parameters to create a non-DIIOP domino connection
     * @param serverName - name of domino server
     * @param dbName - database name
     * @param userIdFileName - user id file path
     * @param userName -
     * @param password
    public TestNRPCConnection(String serverName, String dbName, String userIdFileName, String userName, String password)
      try
        NotesThread.sinitThread();
        this.session = NotesFactory.createSession();
        lotus.domino.Registration r = this.session.createRegistration();
        r.switchToID(userIdFileName, password);
        dominodb = session.getDatabase(serverName,dbName);
        if(dominodb == null)
          throw new Exception ("Couldn't create Domino Connection. Please check the parameters.");
        if( dominodb.isOpen() == false)
          this.close();
          throw new Exception("Couldn't create Domino Connection. Please check the parameters. " +
              " server=" + serverName
              + ", user=" + userName
              + ", user_ID_file=" + userIdFileName
              + ", database_path=" + dbName
              + ", password=" + ((password != null)? "<non-null>" : "<null>")
        else
          System.out.println("View Names are : " + dominodb.getViews());
          System.out.println(" Database is Open " + dominodb.getFileName());
      catch(NotesException e){
        String dominoErrorText = e.text;
        int dominoErrorID = e.id;
        switch (dominoErrorID) {
        case NotesError.NOTES_ERR_DOCNOTSAVED :
          System.out.println("NotesException - . Domino Error Id = " + dominoErrorID + ", Domino Error Text = " + dominoErrorText);
          break;
        case NotesError.NOTES_ERR_VIEWOPEN_FAILED :
          System.out.println("Could not open the specified View <viewname>. Domino Error Id = " + dominoErrorID + ", Domino Error Text = " + dominoErrorText);
          break;
        case NotesError.NOTES_ERR_DBNOACCESS :
          System.out.println("No access to the specified Database <dbname>. Domino Error Id = " + dominoErrorID + ", Domino Error Text = " + dominoErrorText);
          break;
        case NotesError.NOTES_ERR_ILLEGAL_SERVER_NAME :
          System.out.println("The servername specified <servername> isn't correct. Domino Error Id = " + dominoErrorID + ", Domino Error Text = " + dominoErrorText);
          break;
        case NotesError.NOTES_ERR_DBOPEN_FAILED :
          System.out.println("Could not open specified Database <dbname>. Domino Error Id = " + dominoErrorID + ", Domino Error Text = " + dominoErrorText);
          break;
        case NotesError.NOTES_ERR_SSOTOKEN_EXP:
          //Single Sign-on Token has expired.
          System.out.println("NotesException -   Domino Error Id = " + dominoErrorID + ", Domino Error Text = " + dominoErrorText);
          break;
        case NotesError.NOTES_ERR_SERVER_ACCESS_DENIED:
          //Access denied.
          System.out.println("This user is not authorized to open DIIOP connections with the Domino server. Check your DIIOP configuration. NotesException - " + dominoErrorID + " " + dominoErrorText);
          break;
        case NotesError.NOTES_ERR_GETIOR_FAILED:
          //Could not get IOR from Domino Server.
          System.out.println("Unable to open a DIIOP connection with " + serverName + ". Make sure the DIIOP and HTTP tasks are running on the Domino server, and that ports are open. NotesException - " + dominoErrorID + " " + dominoErrorText + ".");
          break;
        default:
          //Unexpected error. Show detailed message.
          System.out.println("NotesException - " + dominoErrorID + " " + dominoErrorText);
        e.printStackTrace(System.out);
      catch(Exception ex)
        ex.printStackTrace();
        System.out.println("Error while creating Domino Connection. Details - " + ex + ". Parameters are, " +
            " server=" + serverName
            + ", user=" + userName
            + ", user_ID_file=" + userIdFileName
            + ", database_path=" + dbName
            + ", password=" + ((password != null)? "<non-null>" : "<null>"));
    public synchronized void close()
      try
        this.dominodb = null;
        if(session != null)
          session.recycle();
        session = null;
      catch(Exception ex)
        ex.printStackTrace();
      finally
        NotesThread.stermThread();
     * Gets documents by the specified view name
     * @param viewName - name of the domino view
     * @return
    public synchronized List getColumnNamesForView(String viewName)
      List columnNames = new Vector();
      List documentList = new Vector();
      try
        View view = (lotus.domino.local.View)this.dominodb.getView(viewName);
        ViewEntryCollection entryCollection = view.getAllEntries();
        if(entryCollection == null)
          return null;
        ViewEntry entry = entryCollection.getFirstEntry();
        int i = -1; //counter
        while (entry != null)
          if (entry.isDocument())
            Document doc = entry.getDocument();
            i++;
            //get the Column Names
            if(i == 0)
              List items = doc.getItems();
              String name = "";
              for(int k=0; ((i==0) && (k<items.size())); k++)
                name = ((lotus.domino.Item)items.get(k)).getName();
                //skip column names starting with $ or ($
                if(name != null)
                  columnNames.add(name);
              if(doc == null)
                continue;
              else
                //clean up task
                doc.recycle();
                doc = null;
              //return columnNames;
              documentList.add(0, columnNames);
          entry = entryCollection.getNextEntry();
        }//end of while
      catch(Exception e)
        e.printStackTrace();
      return documentList;
    public static void main(String[] args){
      TestNRPCConnection domino = null;
      try
        System.out.println("java.library.path = '" + System.getProperty("java.library.path") + "'");
         domino = new TestNRPCConnection(
             "testservername",
             "names.nsf",
            "c:/lotus/domino/data/admin.id",
            "UserName/domain",
            "somepassword");
         System.out.println("Column Names " + domino.getColumnNamesForView("Groups"));
      }catch(Exception e)
        e.printStackTrace();
      finally
        //if(domino != null)
          //domino.close();
}

Hi,
Can you try with a Generic Wrapper like JNative (it contains a method to list all exported functions of a dll : even mangled ones) ?
--Marc (http://jnative.sf.net)

I can no longer start FF and am getting this error message in a pop up box: The procedure entry point XRE_FreeAppData could not be located in the dynamic link library xul.dll. How do I resolve?

Please help

Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is su

After installing a new version of Firefox, I get the error message "The procedure entry point JS_GetOperationLimit could not be located in the dynamic link library js3250.dll" when I try to start firefox. Elsewhere in the forum a complete reinstall is suggested; however, I can't do that because of my company's IT policies. Is there any way to solve this problem WITHOUT a complete reinstall? Thank you!
== This happened ==
Every time Firefox opened
== I installed a new version ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)

If you can't reinstall Firefox yourself then you need to contact your IT department and ask them to check the Firefox installation.
It is possible that some files got broken with the latest update.

Missing entry point in nicppaiu.dll

Similar Messages

Maybe you are looking for