Libvirt via virt-manager virtual network start failed
virt-manager v1.2.1
libvirtd v1.2.16
I tested firewall: iptables && ip6tables work well while.
when I start a virtual network named 'default' (created by libvirt), it occur that:
"Error starting network 'default': internal error: Failed to initialize a valid firewall backend".
thanks for any reply
Last edited by shenhd (2015-06-17 03:56:45)
rob356 wrote:
I had the same problem, but with vagrant and the libvirt provider. I fixed it temporarily by re-building libvirt with a patch that removes the code that throws that error. It looks like in an attempt to fix this bug they went overboard checking if a valid firewall backend was loaded. I commented out that section and everything seems to work fine. Obviously this is not a permanent fix, but I don't know enough about libvirt's codebase to fix it properly. Anyways here is the patch:
--- libvirt-1.2.16.orig/src/util/virfirewall.c 2015-05-23 08:56:12.000000000 -0400
+++ libvirt-1.2.16.new/src/util/virfirewall.c 2015-06-18 10:01:51.954157612 -0400
@@ -932,14 +932,14 @@
virMutexLock(&ruleLock);
- if (currentBackend == VIR_FIREWALL_BACKEND_AUTOMATIC) {
+// if (currentBackend == VIR_FIREWALL_BACKEND_AUTOMATIC) {
/* a specific backend should have been set when the firewall
* object was created. If not, it means none was found.
- virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
- _("Failed to initialize a valid firewall backend"));
- goto cleanup;
+// virReportError(VIR_ERR_INTERNAL_ERROR, "%s",
+// _("Failed to initialize a valid firewall backend"));
+// goto cleanup;
+// }
if (!firewall || firewall->err == ENOMEM) {
virReportOOMError();
goto cleanup;
thx! however, @Basic-Master 's solution is better.
Similar Messages
-
I am trying to install VMware Server 2.0.2 on my HP Laptop running Windows 8 Pro as Host. But I am getting the following warning messages but the install continues to completion:
Warning Msg:
Warning 1909. Could not create shortcut Manage Virtual Networks.lnk. Verify that the destination folder exist and that you can access it.
Warning 1909. Could not create shortcut Server Home Page.lnk. Verify that the destination folder exist and that you can access it.
After installation, I am not able to login to the VM Server. When I click on the VMware Sever login icon, the error that I am getting states: okonita1:8333 -
Oops! Page Not Found
Sorry, the page you were looking for could not be found.
I am at a loss how to correct this error. I have googled, read and followed a lot of the online help that I can find including taking ownership of suspect target folders such as ProgramData, all to no avail.
At this point, I am hoping someone does know what specifically can help resolve my issue and I am asking for help. VMware knowledge base or support are not helpful.
Thanks all,
EnyiDid you run the VMServer setup *as Administrator*?
Did you have IIS installed on your system before you installed VMServer? -
Can't create new virtual machine with Virt-manager
After going through the whole setup, I would get this error through backtrace:
File "/usr/share/virt-manager/virtManager/netlist.py", line 346, in validate_network
netobj.start()
File "/usr/share/virt-manager/virtManager/network.py", line 104, in start
self._backend.create()
File "/usr/lib/python2.7/site-packages/libvirt.py", line 2755, in create
if ret == -1: raise libvirtError ('virNetworkCreate() failed', net=self)
libvirtError: Unable to create bridge virbr0: File exists
Hence, I attempted to follow https://wiki.archlinux.org/index.php/Bridge_with_netctl to set up my network bridge and try again, and I'd still get the same error.
I also tried to do sudo virt-manager but I'd get:
** (virt-manager:16835): WARNING **: Could not open X display
No protocol specified
(virt-manager:16835): Gdk-ERROR **: error: XDG_RUNTIME_DIR not set in the environment.
I want to get KVM working using a gui and so I choice virt-manager, but now I'm stuck and don't know where to go from here.Hi Sir,
Please follow these troubleshooting steps mentioned within the article below :
http://blogs.technet.com/b/scvmm/archive/2012/08/13/kb-how-to-troubleshoot-the-needs-attention-and-not-responding-host-status-in-system-center-2012-virtual-machine-manager.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
Local/Virtual Networks Overlapping
Referencing Azure's FAQ documentation, it states local networks (on-prem) and virtual networks (Azure) cannot overlap. Does that indicate NetCFG will become corrupt if I include 10.0.0.0/8 in the local networks address space with an existing subnet
in that range configured within the joining Virtual Network (Azure)? With some forethought, I want to think of Azure an extension of my internal network and control connectivity using firewall rules instead of maintaining "routing rules" in
Azure.Hi,
As the document said,
overlapping address spaces will cause the NETCFG upload or creating virtual network to fail
The azure virtual network configuraion include element AddressPrefix (LocalNetworkSite), it specifies the address space that is used for the local network site. This is the address space of the on-premises network. The IP address ranges that you specify
must not overlap with the IP address ranges of any other local network sites or virtual network sites.
So i think we need to avoid the ip address overlap.
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Cannot install patches via Connection Manager or Update Manager
I tried installing 137 outstanding updates via Update Manager, but they all failed complaining about digital signatures not being verified.
Then i tried using the online "Connection Manager". I managed to queue the 137 jobs no problem, but then they have been stuck in a pending state all day. Is there something else I'm supposed to do?
Is there any way I can just download a patch cluster like I used on all the previous versions of Solaris... it would be so much simpler. :-)# showrev -p | egrep -e '119107|121118|121453|119108|121119|121454'
Patch: 119107-06 Obsoletes: Requires: 119254-06, 119574-02 Incompatibles: Packages: SUNWcsu, SUNWcsr, SUNWppror, SUNWpprou, SUNWppro-plugin-sunos-base
Patch: 121453-02 Obsoletes: 120776-03, 121086-02, 119107-07 Requires: 119574-02, 119254-06 Incompatibles: Packages: SUNWcsu, SUNWcsr, SUNWppror, SUNWpprou, SUNWppro-plugin-sunos-base, SUNWccccrr, SUNWccccr, SUNWccsign, SUNWcsmauth, SUNWccfw, SUNWdc, SUNWbreg, SUNWcctpx, SUNWccccfg, SUNWccfwctrl, SUNWccinv, SUNWupdatemgru, SUNWupdatemgrr
Patch: 119788-02 Obsoletes: Requires: 119107-02 Incompatibles: Packages: SUNWppror, SUNWpprou
Patch: 121118-05 Obsoletes: Requires: 121453-02 Incompatibles: Packages: SUNWppror, SUNWpprou, SUNWppro-plugin-sunos-base, SUNWupdatemgru, SUNWupdatemgrr
Patch: 121118-06 Obsoletes: Requires: 121453-02 Incompatibles: Packages: SUNWppror, SUNWpprou, SUNWppro-plugin-sunos-base, SUNWupdatemgru, SUNWupdatemgrr
Patch: 120335-02 Obsoletes: Requires: 119107-05 Incompatibles: Packages: SUNWpprou
Patch: 120335-04 Obsoletes: Requires: 121453-01 Incompatibles: Packages: SUNWpprou, SUNWcbreg, SUNWdbreg, SUNWebreg, SUNWfbreg, SUNWhbreg, SUNWibreg, SUNWjbreg, SUNWkbreg, SUNWsbreg, SUNWcupdatemgru, SUNWdupdatemgru, SUNWeupdatemgru, SUNWfupdatemgru, SUNWhupdatemgru, SUNWiupdatemgru, SUNWjupdatemgru, SUNWkupdatemgru, SUNWsupdatemgru
Patch: 121081-05 Obsoletes: Requires: 121453-02 Incompatibles: Packages: SUNWccccrr, SUNWccccr, SUNWccsign, SUNWccfw, SUNWcctpx, SUNWccccfg, SUNWccfwctrl, SUNWccinv
Patch: 121081-02 Obsoletes: Requires: 121453-02 Incompatibles: Packages: SUNWccccr, SUNWccfw, SUNWcctpx, SUNWccccfg
Patch: 122231-01 Obsoletes: Requires: 121453-02 Incompatibles: Packages: SUNWcctpx
# pkginfo -l SUNWupdatemgru SUNWupdatemgrr | egrep 'PKGINST|VERSION'
PKGINST: SUNWupdatemgrr
VERSION: 0.1,REV=2005.05.20.10.51
PKGINST: SUNWupdatemgru
VERSION: 0.1,REV=2005.05.20.10.51
# pkginfo -l SUNWpprou SUNWppror | egrep 'PKGINST|VERSION'
PKGINST: SUNWppror
VERSION: 5.0,REV=2005.01.09.23.05
PKGINST: SUNWpprou
VERSION: 5.0,REV=2005.01.09.23.05
# -
Virt-manager (libvirt) set up bridged network
I have googled and searched and can't find instructions on setting up a bridged network for use with virt-manager. The instructions at
https://wiki.archlinux.org/index.php/KV … Networking
don't really seem to apply to starting vm's with virt-manager. Does anyone have experience setting up a bridged network with libvirt on arch?In case anyone stumbles upon this in the future (as I have done):
Setting this up with virt-manager is pretty simple.
First, you need to create a bridge. You can do this manually or use most of the network management tools for this. I used systemd-networkd (just ignore the stuff about the container). You could also use netctl ore others.
After you created the bridge and added your default network device to it, open the network device of you vm (or create one if there is none) and switch the "Network source" to the bridge you just created. And with that you should be fine.
PS: I just saw that virt-manager seems to be capable of creating bridges by itself, right-click you hypervisor, go to "Details", "Network Interfaces" and create a new bridge. -
0xc000025 - Trying Recovery System via Recovery Manager: Windows failed to start.
Name: Pavilion dv4-2161nr
Prod. Number: WA691UA#ABA
Windows 7 64-bit
I splitted original Hard Disk Partition in three partitions. I formatted those two not containing O.S. Now I want to format the partition containing the O.S.
1) If I choose "Recovery System", will it format all three partitions? Or will it format the partition I choose to?
2) I tryed "Recovery System", but it failed. What can I do?
2.1) I made Recovery DVDs when first used the PC. It loads but it never runs. It's like theres no AutoRun, and there's no ".exe" to execute when I open the first DVD Recovery via Windows Explorer. What am I missing?
2.2) I tryed Recovery System via Recovery Manager. System shuts down and starts reiniciating but it gives the following message "Windows Boot Manger: Windows failed to start. A recent hardware of software change might be the problem. Status: 0xc000025. The boot selection failed because a required device is inacessible". What can I do?
Regards,
Rafael.I tested the Hard Drive and it passed 100% ok.
I tested the Memory and it passed 100% ok.
My PC runs a Win 7 Home Premium.
I've just run a Win 7 Ultimate CD Installation. It formatted the System Partition, but I couldn't get Win 7 installed because when I filled in my Product Key it said the Product Key wasn't right. Is it because Product Key for Win 7 Home Premium wouldn't work on a Win 7 Ultimate installation?
I hoped the Hard Drive would be ok after it had been formatted while I tryed Win 7 Ultimate installation. So I tryed once again to boot with HP Recovery Disc. It stopped at 23% once again. Until 23% there are all noises that get me thinking PC is running ok. When it get up to 23% all noises just stop.
Any ideias?
And thanks once again.
Rafael. -
[SOLVED] Cannot start Virtual Network: "out of memory"
I am attempting to use KVM, Qemu and libvirt to run Windows VM's to test websites in IE. I have gotten everything to work fine except guest to host communication, which obviously is crucial for testing the websites.
Currently i am using macvtap to setup networking, which works beautifully for everything except host to guest networking. The easiest way seems to be to use isolated virtual networks. However, i cannot start any virtual networks. I have tried from inside virtual manager and inside virsh command prompt. I always get "out of memory". I have googled the error and nobody seems to have this problem.
One note, I do NOT have a swap drive. Is this needed for virtual networks?
EDIT:
I have now tried exactly the same on another, identical computer but with swap drive (16gb) and it did not work there either. Both computers have 8gb ram. Seems to be loads free in tops.
Last edited by sup3rman (2015-01-23 12:29:50)sup3rman wrote:
I am attempting to use KVM, Qemu and libvirt to run Windows VM's to test websites in IE. I have gotten everything to work fine except guest to host communication, which obviously is crucial for testing the websites.
Currently i am using macvtap to setup networking, which works beautifully for everything except host to guest networking. The easiest way seems to be to use isolated virtual networks. However, i cannot start any virtual networks. I have tried from inside virtual manager and inside virsh command prompt. I always get "out of memory". I have googled the error and nobody seems to have this problem.
One note, I do NOT have a swap drive. Is this needed for virtual networks?
EDIT:
I have now tried exactly the same on another, identical computer but with swap drive (16gb) and it did not work there either. Both computers have 8gb ram. Seems to be loads free in tops.
I have the same issue on my install. I got so desperate that I actually wiped my laptop and reinstalled everything, same problem. Out of memory error when trying to create the default network. 16GB of RAM, with 96% of it free when I attempted. -
Hi there,
i use the current virt-manager from aur (0.8.2-1) and libvirt (0.7.5-1).
But libvirt crashes when virt-manager tries to connect:
Dec 27 19:30:42 q9400-arch libvirtd: 19:30:42.997: error : virLibNodeDeviceError:618 : invalid node device pointer in virNodeDeviceFree
Dec 27 19:30:42 q9400-arch libvirtd: 19:30:42.997: error : virLibNodeDeviceError:618 : invalid node device pointer in virNodeDeviceFree
Dec 27 19:30:42 q9400-arch libvirtd: 19:30:42.998: error : virLibNodeDeviceError:618 : invalid node device pointer in virNodeDeviceFree
Dec 27 19:30:42 q9400-arch libvirtd: 19:30:42.998: error : virLibNodeDeviceError:618 : invalid node device pointer in virNodeDeviceFree
Dec 27 19:30:42 q9400-arch libvirtd: 19:30:42.998: error : virLibNodeDeviceError:618 : invalid node device pointer in virNodeDeviceFree
Dec 27 19:30:42 q9400-arch libvirtd: 19:30:42.999: error : virLibNodeDeviceError:618 : invalid node device pointer in virNodeDeviceFree
Dec 27 19:30:42 q9400-arch libvirtd: 19:30:42.999: error : virLibNodeDeviceError:618 : invalid node device pointer in virNodeDeviceFree
Dec 27 19:30:43 q9400-arch libvirtd: 19:30:43.000: error : virLibNodeDeviceError:618 : invalid node device pointer in virNodeDeviceFree
Dec 27 19:30:43 q9400-arch libvirtd: 19:30:43.000: error : virLibNodeDeviceError:618 : invalid node device pointer in virNodeDeviceFree
Dec 27 19:30:43 q9400-arch libvirtd: 19:30:43.002: error : virLibNodeDeviceError:618 : invalid node device pointer in virNodeDeviceFree
Dec 27 19:30:43 q9400-arch libvirtd: 19:30:43.003: error : virLibNodeDeviceError:618 : invalid node device pointer in virNodeDeviceFree
Dec 27 19:30:43 q9400-arch libvirtd: 19:30:43.004: error : virLibNodeDeviceError:618 : invalid node device pointer in virNodeDeviceFree
Dec 27 19:30:43 q9400-arch libvirtd: 19:30:43.012: error : virLibNodeDeviceError:618 : invalid node device pointer in virNodeDeviceFree
Dec 27 19:30:43 q9400-arch libvirtd: 19:30:43.022: error : virLibNodeDeviceError:618 : invalid node device pointer in virNodeDeviceFree
Dec 27 19:30:43 q9400-arch libvirtd: 19:30:43.023: error : qemudDomainGetVcpus:4095 : Requested operation is not valid: cannot list vcpu pinning for an inactive domain
Dec 27 19:30:43 q9400-arch libvirtd: 19:30:43.025: error : qemudDomainGetVcpus:4095 : Requested operation is not valid: cannot list vcpu pinning for an inactive domain
Dec 27 19:30:43 q9400-arch kernel: libvirtd[4344] general protection ip:7f969935c7c2 sp:7f9696449c08 error:0 in libc-2.11.1.so[7f96992e1000+14d000]
What's wrong there? Or do i something wrong?
Regards
Last edited by LukeGee (2009-12-27 18:40:06)I updated libvirt to git-20100125. The crashes are gone, but when I try to install a guest, virtinst crashes with the following output:
Starting install...
ERROR internal error unable to start guest: chardev: opening backend "pty" failed
Domain installation may not have been
successful. If it was, you can restart your domain
by running 'virsh start vzoltan0'; otherwise, please
restart your installation.
ERROR internal error unable to start guest: chardev: opening backend "pty" failed
Traceback (most recent call last):
File "/usr/bin/virt-install", line 943, in <module>
main()
File "/usr/bin/virt-install", line 839, in main
start_time, guest.start_install)
File "/usr/bin/virt-install", line 894, in do_install
dom = install_func(conscb, progresscb, wait=(not wait))
File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 660, in start_install
return self._do_install(consolecb, meter, removeOld, wait)
File "/usr/lib/python2.6/site-packages/virtinst/Guest.py", line 758, in _do_install
self.domain = self.conn.createLinux(install_xml, 0)
File "/usr/lib/python2.6/site-packages/libvirt.py", line 1097, in createLinux
if ret is None:raise libvirtError('virDomainCreateLinux() failed', conn=self)
libvirtError: internal error unable to start guest: chardev: opening backend "pty" failed
I have tried almost everything, from reverting to older git checkouts and the 0.6.5 stable release to updating virtinst, virtviewer and virt-manager to the latest hg builds. None of this worked, and I can't seem to find anything about this error on google either.
Does anyone have a solution? -
Could not create virtual machine in virt-manager with kvm
I installed the following packages:
libvirt 0.6.1-1 (modified PKGBUILD from AUR)
kvm 84-1
qemu 0.10.0-1
virtinst 0.400.3-1 (modified PKGBUILD from AUR)
virtviewer 0.0.3-2
virt-manager 0.7.0-1(modified PKGBUILD from AUR)
And my current user belongs to the following groups:
disk lp audio optical storage power locate hal camera kvm libvirt tinh
Here is a part of my rc.conf
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(e100 mii iwl3945 kvm kvm-intel)
DAEMONS=(syslog-ng @hal @network @dnsmasq @oss @cups @fuse @libvirtd !netfs !crond)
List of loaded kernel modules:
modprobe -l | grep kvm
/lib/modules/2.6.28-ARCH/kernel/arch/x86/kvm/kvm.ko
/lib/modules/2.6.28-ARCH/kernel/arch/x86/kvm/kvm-amd.ko
/lib/modules/2.6.28-ARCH/kernel/arch/x86/kvm/kvm-intel.ko
My CPU does support Intel VT.
[tinh@tinh-laptop ~]$ egrep '^flags.*(vmx|svm)' /proc/cpuinfo
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon bts pni monitor vmx est tm2 xtpr pdcm
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon bts pni monitor vmx est tm2 xtpr pdcm
[tinh@tinh-laptop ~]$
My kernel version is:
uname -a
Linux tinh-laptop 2.6.28-ARCH #1 SMP PREEMPT Sun Feb 22 11:03:50 UTC 2009 i686 Genuine Intel(R) CPU T2400 @ 1.83GHz GenuineIntel GNU/Linux
I also attached a screenshot of virt-manager.
Any helps are welcomed.
Thanks
Last edited by tinhtruong (2009-03-10 08:10:50)Maybe the command line shows some errors.Try something like
/usr/bin/kvm -M pc -monitor pty -boot d -hda /dev/vg01/opsi -cdrom /root/debian-500-i386-netinst.iso -net nic,macaddr=00:16:3e:49:da:10,vlan=0 -net tap,script=,vlan=0,ifname=vnet0 -serial pty -parallel none -usb -vnc :0
-hda is where you want to install the machine. Here it's a logical volume, but you can also use an image.
-cdrom is the installation medium
you can probably omit -vnc :0. I used it because I install machines on servers without gui. -
[SOLVED]Modem-manager won't start with Network manager
Hi,
I have a problem with getting modem-manager work under gnome. After first Arch install to this laptop, Network manager didn't show my 3G-modem, so I installed modem-manager and usb_modeswitch. Modem is Huawei E367 and it works well with wvdial. Only problem is to get it working with Network manager.
From output of dmesg I see that there is an error, when Network manager is trying to start modem-manager:
[ 3224.705193] do_trap: 322 callbacks suppressed
[ 3224.705198] modem-manager[3112] trap int3 ip:7ff7baab4143 sp:7fff996e62b0 error:0
[ 3224.719275] modem-manager[3114] trap int3 ip:7f58f4c5e143 sp:7fffc82b2400 error:0
[ 3224.733880] modem-manager[3116] trap int3 ip:7f579dda4143 sp:7fff77910850 error:0
[ 3224.748789] modem-manager[3118] trap int3 ip:7ff752c6f143 sp:7fff8ae42e20 error:0
[ 3224.763501] modem-manager[3120] trap int3 ip:7fb4db83f143 sp:7fff3023cbf0 error:0
[ 3224.777865] modem-manager[3122] trap int3 ip:7fa17a33a143 sp:7fffc1628260 error:0
[ 3224.792165] modem-manager[3124] trap int3 ip:7f00a39fb143 sp:7fff075a0fb0 error:0
[ 3224.806603] modem-manager[3126] trap int3 ip:7f9a62e23143 sp:7fffc2ccfed0 error:0
[ 3224.820736] modem-manager[3128] trap int3 ip:7f3d2994d143 sp:7ffff2581340 error:0
[ 3224.834985] modem-manager[3130] trap int3 ip:7f5adda9a143 sp:7fff8a70a4a0 error:0
From /var/log/messages.log I found also something:
Apr 14 16:02:14 localhost NetworkManager[713]: <info> trying to start the modem manager...
Apr 14 16:02:14 localhost dbus[651]: [system] Activating service name='org.freedesktop.ModemManager' (using servicehelper)
Apr 14 16:02:14 localhost dbus[651]: [system] Successfully activated service 'org.freedesktop.ModemManager'
Apr 14 16:02:14 localhost NetworkManager[713]: <info> modem-manager is now available
Apr 14 16:02:14 localhost modem-manager: libhal_ctx_init() failed: (null)
Apr 14 16:02:14 localhost NetworkManager[713]: <info> the modem manager disappeared
If I try to run modem-manager manually with debug:
$ sudo modem-manager --debug
** ERROR **: libhal_ctx_init() failed: (null)
Make sure the hal daemon is running?
So it seems to be because of hal isn't running, if I try to start hal daemon it fails:
$ sudo /etc/rc.d/hal start
:: Starting Hardware Abstraction Layer [FAIL]
I also tried to start hal at boot by putting it to DAEMONS in rc.conf. but didn't start either.
The laptop is Asus X61SL with x86_64 version of ArchLinux.
Kernel: 3.3.1-1-ARCH
Would be cool if anyone can solve this.
Last edited by Jompu (2012-04-14 20:42:20)Thanks for your quick reply Strike0!
I ran lsusb and usb_modeswitch as you instructed:
[louis@Louis-Laptop ~]$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 04f2:b071 Chicony Electronics Co., Ltd 2.0M UVC Webcam / CNF7129
Bus 002 Device 002: ID 045e:00dd Microsoft Corp. Comfort Curve Keyboard 2000 V1.0
Bus 003 Device 002: ID 046d:c526 Logitech, Inc. Nano Receiver
Bus 001 Device 006: ID 12d1:1506 Huawei Technologies Co., Ltd. E398 LTE/UMTS/GSM Modem/Networkcard
[louis@Louis-Laptop ~]$ sudo usb_modeswitch -v 12d1 -p 1506 -M '55534243123456780000000000000011062000000100000000000000000000'
Password:
Looking for default devices ...
found matching product ID
adding device
Found device in default mode, class or configuration (1)
Accessing device 006 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using first interface: 0x00
Using endpoints 0x01 (out) and 0x82 (in)
Not a storage device, skipping SCSI inquiry
USB description data (for identification)
Manufacturer: Huawei Technologies
Product: HUAWEI Mobile
Serial No.: not provided
Looking for active driver ...
OK, driver found; name unknown, limitation of libusb1
OK, driver "unkown" detached
Setting up communication with interface 0
Using endpoint 0x01 for message sending ...
Trying to send message 1 to endpoint 0x01 ...
OK, message successfully sent
Resetting response endpoint 0x82
Resetting message endpoint 0x01
-> Run lsusb to note any changes. Bye.
It didn't help. Network manager doesn't show anything related 3G.
I don't think it's usb_modeswitch since 3G stick works great with wvdial on same system. Could it be a bug on modem-manager?
I start only the Network manager on boot, but while Network manager tries to start modem-manager, it throws error continuously in dmesg. Error is the same as in first post. -
Hello Group,
We are using Weblogic Version 9.2.3 & facing some problem related to 'jackrabbit' not available. I feel we are facing problem similar to the one mentioned in following link
Re: What causes XAER_RMFAIL : Resource manager is unavailable / unregistered
Following above post, we tried increased the Initial Capacity of this 'jackrabbit' Resource Adapter to 50. Initially it was 1. Although this doesn't change anything. Although it works fine for a few hours but seems like after server has run for a few hours and served some requests it starts showing this exception.
Following is our weblogic-ra.xml file.
<?xml version='1.0' encoding='UTF-8'?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<native-libdir></native-libdir>
<jndi-name>repository</jndi-name>
<enable-access-outside-app>true</enable-access-outside-app>
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<security></security>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params></pool-params>
<logging></logging>
</default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.jcr.Repository</connection-factory-interface>
<default-connection-properties>
<pool-params>
<initial-capacity>50</initial-capacity>
<max-capacity>100</max-capacity>
</pool-params>
<logging></logging>
<properties>
<property>
<name>HomeDir</name>
<value>jackrabbit-preferences</value>
</property>
<property>
<name>ConfigFile</name>
<value>jackrabbit-preferences/repository.xml</value>
</property>
</properties>
</default-connection-properties>
<connection-instance>
<jndi-name>jackrabbit</jndi-name>
<connection-properties>
<pool-params>
<initial-capacity>50</initial-capacity>
<max-capacity>250</max-capacity>
</pool-params>
<logging></logging>
<properties>
<property>
<name>HomeDir</name>
<value>jackrabbit-preferences</value>
</property>
</properties>
</connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Also please find below the exception that we see in the logs.
Caused by: ag.mycompany1.workflow.runtime.DocumentManagementServiceException: null: javax.jcr.RepositoryException: start() failed on resource 'jackrabbit': XAER_RMFAIL : Resource manager is unavailable
javax.transaction.xa.XAException: Internal error: XAResource 'jackrabbit' is unavailable
at weblogic.transaction.internal.XAResourceDescriptor.checkResource(XAResourceDescriptor.java:1143)
at weblogic.transaction.internal.XAResourceDescriptor.startResourceUse(XAResourceDescriptor.java:685)
at weblogic.transaction.internal.XAServerResourceInfo.start(XAServerResourceInfo.java:1181)
at weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerResourceInfo.java:1115)
at weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerResourceInfo.java:274)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:497)
at weblogic.transaction.internal.ServerTransactionImpl.enlistResource(ServerTransactionImpl.java:429)
at weblogic.connector.transaction.outbound.XATxConnectionHandler.enListResource(XATxConnectionHandler.java:118)
at weblogic.connector.outbound.ConnectionHandlerBaseImpl.prepareHandle(ConnectionHandlerBaseImpl.java:670)
at weblogic.connector.outbound.ConnectionHandlerBaseImpl.createConnectionHandle(ConnectionHandlerBaseImpl.java:361)
at weblogic.connector.outbound.ConnectionInfo.createConnectionHandle(ConnectionInfo.java:411)
at weblogic.connector.outbound.ConnectionManagerImpl.getConnection(ConnectionManagerImpl.java:308)
at weblogic.connector.outbound.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:115)
at org.apache.jackrabbit.jca.JCARepositoryHandle.login(JCARepositoryHandle.java:98)
at org.apache.jackrabbit.jca.JCARepositoryHandle.login(JCARepositoryHandle.java:89)
at com.mycompany2.infinity.bpm.vfs.jcr.spring.JcrSessionFactory.createSession(JcrSessionFactory.java:38)
at com.mycompany2.infinity.bpm.vfs.jcr.spring.JcrSessionFactoryUtils.getSession(JcrSessionFactoryUtils.java:72)
at com.mycompany2.infinity.bpm.vfs.jcr.spring.JcrSessionFactory.getSession(JcrSessionFactory.java:33)
at com.mycompany2.infinity.bpm.vfs.impl.jcr.AbstractJcrDocumentRepositoryService.doWithJcrVfs(AbstractJcrDocumentRepositoryService.java:537)
at com.mycompany2.infinity.bpm.vfs.impl.jcr.AbstractJcrDocumentRepositoryService.doWithJcrVfs(AbstractJcrDocumentRepositoryService.java:564)
at com.mycompany2.infinity.bpm.vfs.impl.jcr.AbstractJcrDocumentRepositoryService.retrieveFileContent(AbstractJcrDocumentRepositoryService.java:186)
at com.mycompany2.infinity.bpm.vfs.impl.AbstractDocumentRepositoryServiceImpl.retrieveFileContent(AbstractDocumentRepositoryServiceImpl.java:46)
at ag.mycompany1.workflow.runtime.beans.DocumentManagementServiceImpl$5.withVfs(DocumentManagementServiceImpl.java:112)
at ag.mycompany1.workflow.runtime.beans.DocumentManagementServiceImpl.adaptVfsCall(DocumentManagementServiceImpl.java:417)
at ag.mycompany1.workflow.runtime.beans.DocumentManagementServiceImpl.retrieveDocumentContent(DocumentManagementServiceImpl.java:108)
at sun.reflect.GeneratedMethodAccessor826.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at ag.mycompany1.workflow.runtime.beans.interceptors.CallingInterceptor.invoke(CallingInterceptor.java:18)
at ag.mycompany1.workflow.runtime.interceptor.MethodInvocationImpl.proceed(MethodInvocationImpl.java:95)
at ag.mycompany1.workflow.runtime.beans.interceptors.POJOExceptionHandler.invoke(POJOExceptionHandler.java:23)
at ag.mycompany1.workflow.runtime.interceptor.MethodInvocationImpl.proceed(MethodInvocationImpl.java:95)
at ag.mycompany1.workflow.runtime.beans.interceptors.GuardingInterceptor.invoke(GuardingInterceptor.java:87)
at ag.mycompany1.workflow.runtime.interceptor.MethodInvocationImpl.proceed(MethodInvocationImpl.java:95)
at ag.mycompany1.workflow.runtime.beans.interceptors.AbstractLoginInterceptor.performCall(AbstractLoginInterceptor.java:142)
at ag.mycompany1.workflow.runtime.beans.interceptors.AbstractLoginInterceptor.invoke(AbstractLoginInterceptor.java:80)
at ag.mycompany1.workflow.runtime.spring.SpringBeanLoginInterceptor.invoke(SpringBeanLoginInterceptor.java:58)
at ag.mycompany1.workflow.runtime.interceptor.MethodInvocationImpl.proceed(MethodInvocationImpl.java:95)
at ag.mycompany1.workflow.runtime.spring.SpringSessionInterceptor$1.doInConnection(SpringSessionInterceptor.java:104)
at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:342)
at ag.mycompany1.workflow.runtime.spring.SpringSessionInterceptor.invoke(SpringSessionInterceptor.java:52)
at ag.mycompany1.workflow.runtime.interceptor.MethodInvocationImpl.proceed(MethodInvocationImpl.java:95)
at ag.mycompany1.workflow.runtime.spring.SpringConfigurationInterceptor.invoke(SpringConfigurationInterceptor.java:94)
at ag.mycompany1.workflow.runtime.interceptor.MethodInvocationImpl.proceed(MethodInvocationImpl.java:95)
at ag.mycompany1.workflow.runtime.beans.interceptors.PropertyLayerProviderInterceptor.invoke(PropertyLayerProviderInterceptor.java:85)
at ag.mycompany1.workflow.runtime.interceptor.MethodInvocationImpl.proceed(MethodInvocationImpl.java:95)
at ag.mycompany1.workflow.runtime.beans.interceptors.DebugInterceptor.invoke(DebugInterceptor.java:25)
at ag.mycompany1.workflow.runtime.interceptor.MethodInvocationImpl.proceed(MethodInvocationImpl.java:95)
at ag.mycompany1.workflow.runtime.spring.SpringTxInterceptor$1.doInTransaction(SpringTxInterceptor.java:62)
at org.springframework.transaction.support.TransactionTemplate.execute(TransactionTemplate.java:128)
at ag.mycompany1.workflow.runtime.spring.SpringTxInterceptor.invoke(SpringTxInterceptor.java:47)
at ag.mycompany1.workflow.runtime.interceptor.MethodInvocationImpl.proceed(MethodInvocationImpl.java:95)
at ag.mycompany1.workflow.runtime.interceptor.MethodInvocationImpl.execute(MethodInvocationImpl.java:55)
at ag.mycompany1.workflow.runtime.beans.InvocationManager.invoke(InvocationManager.java:46)
at $Proxy175.retrieveDocumentContent(Unknown Source)
at ag.mycompany1.workflow.runtime.spring.DocumentManagementServiceBean.retrieveDocumentContent(DocumentManagementServiceBean.java:70)
at sun.reflect.GeneratedMethodAccessor826.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at ag.mycompany1.workflow.runtime.spring.SpringServiceFactory$SpringServiceInvocationHandler.invoke(SpringServiceFactory.java:159)
at $Proxy175.retrieveDocumentContent(Unknown Source)
at com.infinity.bpm.ui.preferences.AbstractDocumentServicePreferencesManager.loadPreferences(AbstractDocumentServicePreferencesManager.java:318)
at com.infinity.bpm.ui.preferences.AbstractDocumentServicePreferencesManager.getPreferences(AbstractDocumentServicePreferencesManager.java:269)
at com.infinity.bpm.ui.preferences.AbstractDocumentServicePreferencesManager.getPreferencesEditor(AbstractDocumentServicePreferencesManager.java:133)
at com.mycompany2.infinity.bpm.bcc.configuration.TrafficLightViewPropertyProvider.<init>(TrafficLightViewPropertyProvider.java:85)
at com.mycompany2.infinity.bpm.bcc.configuration.TrafficLightViewPropertyProvider.getInstance(TrafficLightViewPropertyProvider.java:103)
at com.mycompany2.sims.workflow.tlv.TrafficLightDataLoader.persistData(TrafficLightDataLoader.java:129)
at com.mycompany2.sims.workflow.tlv.TrafficLightDataLoader.loadData(TrafficLightDataLoader.java:73)
at com.mycompany2.sims.workflow.SyncSettingsBean.reload(SyncSettingsBean.java:73)
at com.mycompany2.sims.workflow.EnterpriseSettings.isWorklistConfigured(EnterpriseSettings.java:143)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.myfaces.el.PropertyResolverImpl.getProperty(PropertyResolverImpl.java:457)
at org.apache.myfaces.el.PropertyResolverImpl.getValue(PropertyResolverImpl.java:85)
at com.sun.facelets.el.LegacyELContext$LegacyELResolver.getValue(LegacyELContext.java:141)
at com.sun.el.parser.AstValue.getValue(AstValue.java:96)
at com.sun.el.ValueExpressionImpl.getValue(ValueExpressionImpl.java:183)
at com.sun.facelets.el.TagValueExpression.getValue(TagValueExpression.java:71)
at com.sun.facelets.tag.TagAttribute.getObject(TagAttribute.java:233)
at com.sun.facelets.tag.TagAttribute.getBoolean(TagAttribute.java:79)
at com.sun.facelets.tag.jstl.core.ChooseWhenHandler.isTestTrue(ChooseWhenHandler.java:49)
at com.sun.facelets.tag.jstl.core.ChooseHandler.apply(ChooseHandler.java:67)
at com.sun.facelets.tag.jsf.ComponentHandler.applyNextHandler(ComponentHandler.java:314)
at com.sun.facelets.tag.jsf.ComponentHandler.apply(ComponentHandler.java:169)
at com.sun.facelets.tag.CompositeFaceletHandler.apply(CompositeFaceletHandler.java:47)
at com.sun.facelets.tag.jsf.core.ViewHandler.apply(ViewHandler.java:109)
at com.sun.facelets.compiler.NamespaceHandler.apply(NamespaceHandler.java:49)
at com.sun.facelets.compiler.EncodingHandler.apply(EncodingHandler.java:25)
at com.sun.facelets.impl.DefaultFacelet.apply(DefaultFacelet.java:95)
at com.sun.facelets.FaceletViewHandler.buildView(FaceletViewHandler.java:524)
at com.sun.facelets.FaceletViewHandler.renderView(FaceletViewHandler.java:567)
at org.apache.myfaces.trinidadinternal.application.ViewHandlerImpl.renderView(ViewHandlerImpl.java:182)
at org.apache.myfaces.lifecycle.RenderResponseExecutor.execute(RenderResponseExecutor.java:41)
at org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:132)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:140)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at org.apache.myfaces.webapp.filter.ExtensionsFilter.doFilter(ExtensionsFilter.java:147)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at ag.mycompany1.web.jsf.common.ExceptionFilter.doFilter(ExceptionFilter.java:45)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:290)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._invokeDoFilter(TrinidadFilterImpl.java:250)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:207)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:161)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at ag.mycompany1.web.jsf.common.LoginFilter.doFilter(LoginFilter.java:250)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3251)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
: start() failed on resource 'jackrabbit': XAER_RMFAIL : Resource manager is unavailable
Any help in this regard is highly appreciated. Thanks.Hi,
Can you please try increase the below MaxXACallMillis setting in Weblogic set 'Maximum Duration of XA Calls' to a bigger value
MaxXACallMillis: Sets the maximum allowed duration (in milliseconds) of XA calls to XA resources. This setting applies to the entire domain.
http://docs.oracle.com/cd/E12840_01/wls/docs103/jta/trxcon.html
The parameter is exposed through administration console: services --> jta --> advanced --> "Maximum Duration of XA Calls:"
Check the below docs for more information
WLS 10.3: Intermittent XA error: XAResource.XAER_RMERR (Doc ID 1118264.1)
Hope it Helps -
Hi All,
I am facing below issue without any change in the config from weblogic
Managed servers are coming up and running without any issue
But when we are doing any operation from application then its failing
java.sql.SQLException: Unexpected exception while enlisting XAConnection java.sql.SQLException: XA error: XAResource.XAER_RMFAIL start() failed on resource 'myDomain': XAER_RMFAIL : Resource manager is unavailable
Regards
LokeshHi,
Can you please try increase the below MaxXACallMillis setting in Weblogic set 'Maximum Duration of XA Calls' to a bigger value
MaxXACallMillis: Sets the maximum allowed duration (in milliseconds) of XA calls to XA resources. This setting applies to the entire domain.
http://docs.oracle.com/cd/E12840_01/wls/docs103/jta/trxcon.html
The parameter is exposed through administration console: services --> jta --> advanced --> "Maximum Duration of XA Calls:"
Check the below docs for more information
WLS 10.3: Intermittent XA error: XAResource.XAER_RMERR (Doc ID 1118264.1)
Hope it Helps -
Hi,
We are using DM Dynamic Work flow in Project Server 2010 environment. When we tried to create a project the project is creating and teh workflow is not starting-- in the queue jobs the start work flow is failing withput blocking correlation -- below is teh
eror message which we are getting
Exception Starting Workflow: Exception has been thrown by the target of an invocation.. Trace: at System.RuntimeMethodHandle._InvokeConstructor(Object[] args, SignatureStruct& signature, IntPtr declaringType) at System.Reflection.RuntimeConstructorInfo.Invoke(BindingFlags
invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes) at Microsoft.SharePoint.Workflow.SPWorkflowManager.LoadPluggableClass(String
classname, String assembly, Object[] parameters) at Microsoft.SharePoint.Workflow.SPWorkflowManager.GetService(SPWorkflowAssociation association, SPWorkflowEngine engine) at Microsoft.SharePoint.Workflow.SPWorkflowManager.RunWorkflowElev(SPWorkflow workflow,
Collection`1 events, SPWorkflowRunOptionsInternal runOptions) at Microsoft.SharePoint.Workflow.SPWorkflowManager.StartWorkflowElev(Object context, SPWorkflowAssociation association, DateTime elevationTimeUtc, SPWorkflowEvent startEvent, SPWorkflowRunOptions
runOptions) at Microsoft.SharePoint.Workflow.SPWorkflowManager.<>c__DisplayClass13.<StartWorkflow>b__12(SPSite superUserSite, SPWeb superUserWeb) at Microsoft.SharePoint.Workflow.SPWorkflowManager.StartWorkflow(Object context, SPWorkflowAssociation
association, SPWorkflowEvent startEvent, SPWorkflowRunOptions runOpts) at Microsoft.SharePoint.Workflow.SPWorkflowManager.StartWorkflow(Object context, SPWorkflowAssociation association, String eventData, SPWorkflowRunOptions runOptions) at Microsoft.Office.Project.Server.BusinessLayer.Workflow.<>c__DisplayClass36.<StartWorkflow>b__33()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass4.<RunWithElevatedPrivileges>b__2() at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback
secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated secureCode) at Microsoft.Office.Project.Server.BusinessLayer.Workflow.StartWorkflow(Guid projectGuid, Guid enterpriseProjectTypeUid, Boolean isNewProject,
Guid previousEntepriseProjectTypeUid, Boolean skipStage, Guid stageToSkipTo):
WorkflowExceptionStartingWorkflow (35115). Details: id='35115' name='WorkflowExceptionStartingWorkflow' uid='c09fc55c-4f19-49f4-8e49-17d3af3d9916'.
Error:
WorkflowCannotStartWorkflow (35100). Details: id='35100' name='WorkflowCannotStartWorkflow' uid='42c15879-e40c-4d04-b76d-bde108da3a67'.
Queue:
GeneralQueueJobFailed (26000) - WorkflowStartWorkflow.WorkflowStartWorkflowMessage. Details: id='26000' name='GeneralQueueJobFailed' uid='60422e4b-033b-4b41-aa71-503f4d7e20f4' JobUID='64b29d91-4f4e-4719-b199-d2dae88cfbd3' ComputerName='NP2EPMS600V' GroupType='WorkflowStartWorkflow'
MessageType='WorkflowStartWorkflowMessage' MessageId='1' Stage=''. For more details, check the ULS logs on machine NP2EPMS600V for entries with JobUID 64b29d91-4f4e-4719-b199-d2dae88cfbd3.
Request you to help as we are facing this issue from 2 days we tried most of the options like creating new workflow and the same issue persisits for the new once also.
Thanks
Geeth
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful.Hi Paul,
We are using a third party tool called UMT Project Essentials 2012, recently we have removed the tool from sharepoint central admin and uninstalled from the server.
We tried deleting some missing assemblies features web parts which are referencing to that tool but still we are not able to start the workflow and the same issue persists.
below are the log file for your reference.
09/19/2014 02:04:37.96 Microsoft.Office.Project.Server (0x100C) 0x1C20 SharePoint Foundation Workflow Infrastructure 72fu Unexpected Load
Workflow Class: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.IO.FileNotFoundException: Could not load file or assembly 'UMT.CostModule.Workflow, Version=2.0.0.0, Culture=neutral, PublicKeyToken=4ec97d0ba92f048f'
or one of its dependencies. The system cannot find the file specified. File name: 'UMT.CostModule.Workflow, Version=2.0.0.0, Culture=neutral, PublicKeyToken=4ec97d0ba92f048f' at System.Reflection.Assembly._nLoad(AssemblyName fileName,
String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity,
StackCrawlMark& stackMar... b72f3008-fc65-400c-815d-393ccd1c8932
09/19/2014 02:04:37.96* Microsoft.Office.Project.Server (0x100C) 0x1C20 SharePoint Foundation Workflow Infrastructure 72fu Unexpected ...k,
Boolean forIntrospection) at System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) at System.Reflection.Assembly.Load(String
assemblyString) at Microsoft.SharePoint.Workflow.ServiceConfigurationElement.get_AssemblyObject() at Microsoft.SharePoint.Workflow.ServiceConfigurationElement.get_ClassType() at Microsoft.SharePoint.Workflow.SPWorkflowExternalDataExchangeServiceCollection.Add(ServiceConfigurationElement
serviceCfg) at Microsoft.SharePoint.Workflow.SPWinOeHostServices.EnsurePluggableServices(SPSite site, SPWorkflowExternalDataExchangeServiceCollection services, ExternalDataExchangeService existingServices) at
Microsoft.SharePoint.Workflow.SPWinOeHostServices..ctor(SP... b72f3008-fc65-400c-815d-393ccd1c8932
09/19/2014 02:04:37.96* Microsoft.Office.Project.Server (0x100C) 0x1C20 SharePoint Foundation Workflow Infrastructure 72fu Unexpected ...Site
site, SPWeb web, SPWorkflowManager manager, SPWorkflowEngine engine) === Pre-bind state information === LOG: User = HALAMERICA\fhouspepmadmd LOG: DisplayName = UMT.CostModule.Workflow, Version=2.0.0.0, Culture=neutral, PublicKeyToken=4ec97d0ba92f048f
(Fully-specified) LOG: Appbase = file:///C:/Program Files/Microsoft Office Servers/14.0/Bin/ LOG: Initial PrivatePath = NULL Calling assembly : Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c.
=== LOG: This bind starts in default load context. LOG: Using application configuration file: C:\Program Files\Microsoft Office Servers\14.0\Bin\Microsoft.Office.Project.Server.Queuing.exe.config LOG: Using machine configuration file from
C:\Windows\Microsoft.NET\Framework64\v2.0.50727\config\mac... b72f3008-fc65-400c-815d-393ccd1c8932
09/19/2014 02:04:37.96* Microsoft.Office.Project.Server (0x100C) 0x1C20 SharePoint Foundation Workflow Infrastructure 72fu Unexpected ...hine.config.
LOG: Post-policy reference: UMT.CostModule.Workflow, Version=2.0.0.0, Culture=neutral, PublicKeyToken=4ec97d0ba92f048f LOG: The same bind was seen before, and was failed with hr = 0x80070002. --- End of inner exception
stack trace --- at System.RuntimeMethodHandle._InvokeConstructor(Object[] args, SignatureStruct& signature, IntPtr declaringType) at System.Reflection.RuntimeConstructorInfo.Invoke(BindingFlags invokeAttr,
Binder binder, Object[] parameters, CultureInfo culture) at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes) at
Microsoft.SharePoint.Workflow.SPWorkflowManager.LoadPluggableClass(String classname, String assembly, Object[] parameters) b72f3008-fc65-400c-815d-393ccd1c8932
09/19/2014 02:04:37.96 Microsoft.Office.Project.Server (0x100C) 0x1C20 SharePoint Foundation Workflow Infrastructure 98d8 Unexpected System.Reflection.TargetInvocationException:
Exception has been thrown by the target of an invocation. ---> System.IO.FileNotFoundException: Could not load file or assembly 'UMT.CostModule.Workflow, Version=2.0.0.0, Culture=neutral, PublicKeyToken=4ec97d0ba92f048f' or one of its dependencies. The
system cannot find the file specified. File name: 'UMT.CostModule.Workflow, Version=2.0.0.0, Culture=neutral, PublicKeyToken=4ec97d0ba92f048f' at System.Reflection.Assembly._nLoad(AssemblyName fileName, String codeBase, Evidence
assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark&
stackMark, Boolean forIntrosp... b72f3008-fc65-400c-815d-393ccd1c8932
09/19/2014 02:04:37.96* Microsoft.Office.Project.Server (0x100C) 0x1C20 SharePoint Foundation Workflow Infrastructure 98d8 Unexpected ...ection)
at System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) at System.Reflection.Assembly.Load(String assemblyString)
at Microsoft.SharePoint.Workflow.ServiceConfigurationElement.get_AssemblyObject() at Microsoft.SharePoint.Workflow.ServiceConfigurationElement.get_ClassType() at Microsoft.SharePoint.Workflow.SPWorkflowExternalDataExchangeServiceCollection.Add(ServiceConfigurationElement
serviceCfg) at Microsoft.SharePoint.Workflow.SPWinOeHostServices.EnsurePluggableServices(SPSite site, SPWorkflowExternalDataExchangeServiceCollection services, ExternalDataExchangeService existingServices) at
Microsoft.SharePoint.Workflow.SPWinOeHostServices..ctor(SPSite site, SPWeb web,... b72f3008-fc65-400c-815d-393ccd1c8932
09/19/2014 02:04:37.96* Microsoft.Office.Project.Server (0x100C) 0x1C20 SharePoint Foundation Workflow Infrastructure 98d8 Unexpected ...
SPWorkflowManager manager, SPWorkflowEngine engine) === Pre-bind state information === LOG: User = HALAMERICA\fhouspepmadmd LOG: DisplayName = UMT.CostModule.Workflow, Version=2.0.0.0, Culture=neutral, PublicKeyToken=4ec97d0ba92f048f
(Fully-specified) LOG: Appbase = file:///C:/Program Files/Microsoft Office Servers/14.0/Bin/ LOG: Initial PrivatePath = NULL Calling assembly : Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c.
=== LOG: This bind starts in default load context. LOG: Using application configuration file: C:\Program Files\Microsoft Office Servers\14.0\Bin\Microsoft.Office.Project.Server.Queuing.exe.config LOG: Using machine configuration file from
C:\Windows\Microsoft.NET\Framework64\v2.0.50727\config\machine.config. LOG: Po... b72f3008-fc65-400c-815d-393ccd1c8932
09/19/2014 02:04:37.96* Microsoft.Office.Project.Server (0x100C) 0x1C20 SharePoint Foundation Workflow Infrastructure 98d8 Unexpected ...st-policy
reference: UMT.CostModule.Workflow, Version=2.0.0.0, Culture=neutral, PublicKeyToken=4ec97d0ba92f048f LOG: The same bind was seen before, and was failed with hr = 0x80070002. --- End of inner exception stack trace
--- at System.RuntimeMethodHandle._InvokeConstructor(Object[] args, SignatureStruct& signature, IntPtr declaringType) at System.Reflection.RuntimeConstructorInfo.Invoke(BindingFlags invokeAttr, Binder binder,
Object[] parameters, CultureInfo culture) at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes) at Microsoft.SharePoint.Workflow.SPWorkflowManager.LoadPluggableClass(String
classname, String assembly, Object[] parameters) at Microsoft.SharePoint... b72f3008-fc65-400c-815d-393ccd1c8932
09/19/2014 02:04:37.96* Microsoft.Office.Project.Server (0x100C) 0x1C20 SharePoint Foundation Workflow Infrastructure 98d8 Unexpected ....Workflow.SPWorkflowManager.GetService(SPWorkflowAssociation
association, SPWorkflowEngine engine) at Microsoft.SharePoint.Workflow.SPWorkflowManager.RunWorkflowElev(SPWorkflow workflow, Collection`1 events, SPWorkflowRunOptionsInternal runOptions) b72f3008-fc65-400c-815d-393ccd1c8932
09/19/2014 02:04:38.06 w3wp.exe (0x183C) 0x1520 SharePoint Foundation
Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://np2epms600v:32843/e088435160fb48758ab14cf625ed7499/MetadataWebService.svc'
Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:cb6b4635-9c5f-4ad4-b755-0e5fb699d335'
09/19/2014 02:04:38.07 w3wp.exe (0x0CD4) 0x1D24 SharePoint Foundation
Topology e5mb Medium WcfReceiveRequest: LocalAddress: 'http://np2epms600v.corp.halliburton.com:32843/e088435160fb48758ab14cf625ed7499/MetadataWebService.svc'
Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges' MessageId: 'urn:uuid:cb6b4635-9c5f-4ad4-b755-0e5fb699d335' a6d541cf-f5b9-4c7b-9e6b-d2637dd025b6
09/19/2014 02:04:38.07 w3wp.exe (0x0CD4) 0x1D24 SharePoint Foundation
Monitoring nasq Medium Entering monitored scope (ExecuteWcfServerOperation) a6d541cf-f5b9-4c7b-9e6b-d2637dd025b6
09/19/2014 02:04:38.07 w3wp.exe (0x0CD4) 0x1D24 SharePoint Server
Taxonomy fuc5 Medium MetadataWebServiceApplication.GetChanges called on 'Managed Metadata Service' starting. a6d541cf-f5b9-4c7b-9e6b-d2637dd025b6
09/19/2014 02:04:38.08 w3wp.exe (0x0CD4) 0x1D24 SharePoint Server
Taxonomy fuc6 Medium MetadataWebServiceApplication.GetChanges called on 'Managed Metadata Service' completed. a6d541cf-f5b9-4c7b-9e6b-d2637dd025b6
09/19/2014 02:04:38.08 w3wp.exe (0x0CD4) 0x1D24 SharePoint Foundation
Monitoring b4ly Medium Leaving Monitored Scope (ExecuteWcfServerOperation). Execution Time=4.88944823992994 a6d541cf-f5b9-4c7b-9e6b-d2637dd025b6
09/19/2014 02:04:38.12 Microsoft.Office.Project.Server (0x100C) 0x1C20 SharePoint Foundation Workflow Infrastructure 72fq Unexpected Start
Workflow: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.IO.FileNotFoundException: Could not load file or assembly 'UMT.CostModule.Workflow, Version=2.0.0.0, Culture=neutral, PublicKeyToken=4ec97d0ba92f048f'
or one of its dependencies. The system cannot find the file specified. File name: 'UMT.CostModule.Workflow, Version=2.0.0.0, Culture=neutral, PublicKeyToken=4ec97d0ba92f048f' at System.Reflection.Assembly._nLoad(AssemblyName fileName,
String codeBase, Evidence assemblySecurity, Assembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection) at System.Reflection.Assembly.InternalLoad(AssemblyName assemblyRef, Evidence assemblySecurity,
StackCrawlMark& stackMark, Bo... b72f3008-fc65-400c-815d-393ccd1c8932
09/19/2014 02:04:38.12* Microsoft.Office.Project.Server (0x100C) 0x1C20 SharePoint Foundation Workflow Infrastructure 72fq Unexpected ...olean
forIntrospection) at System.Reflection.Assembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection) at System.Reflection.Assembly.Load(String
assemblyString) at Microsoft.SharePoint.Workflow.ServiceConfigurationElement.get_AssemblyObject() at Microsoft.SharePoint.Workflow.ServiceConfigurationElement.get_ClassType() at Microsoft.SharePoint.Workflow.SPWorkflowExternalDataExchangeServiceCollection.Add(ServiceConfigurationElement
serviceCfg) at Microsoft.SharePoint.Workflow.SPWinOeHostServices.EnsurePluggableServices(SPSite site, SPWorkflowExternalDataExchangeServiceCollection services, ExternalDataExchangeService existingServices) at
Microsoft.SharePoint.Workflow.SPWinOeHostServices..ctor(SPSite ... b72f3008-fc65-400c-815d-393ccd1c8932
09/19/2014 02:04:38.12* Microsoft.Office.Project.Server (0x100C) 0x1C20 SharePoint Foundation Workflow Infrastructure 72fq Unexpected ...site,
SPWeb web, SPWorkflowManager manager, SPWorkflowEngine engine) === Pre-bind state information === LOG: User = HALAMERICA\fhouspepmadmd LOG: DisplayName = UMT.CostModule.Workflow, Version=2.0.0.0, Culture=neutral, PublicKeyToken=4ec97d0ba92f048f
(Fully-specified) LOG: Appbase = file:///C:/Program Files/Microsoft Office Servers/14.0/Bin/ LOG: Initial PrivatePath = NULL Calling assembly : Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c.
=== LOG: This bind starts in default load context. LOG: Using application configuration file: C:\Program Files\Microsoft Office Servers\14.0\Bin\Microsoft.Office.Project.Server.Queuing.exe.config LOG: Using machine configuration file from
C:\Windows\Microsoft.NET\Framework64\v2.0.50727\config\machine.... b72f3008-fc65-400c-815d-393ccd1c8932
09/19/2014 02:04:38.12* Microsoft.Office.Project.Server (0x100C) 0x1C20 SharePoint Foundation Workflow Infrastructure 72fq Unexpected ...config.
LOG: Post-policy reference: UMT.CostModule.Workflow, Version=2.0.0.0, Culture=neutral, PublicKeyToken=4ec97d0ba92f048f LOG: The same bind was seen before, and was failed with hr = 0x80070002. --- End of inner exception
stack trace --- at System.RuntimeMethodHandle._InvokeConstructor(Object[] args, SignatureStruct& signature, IntPtr declaringType) at System.Reflection.RuntimeConstructorInfo.Invoke(BindingFlags invokeAttr,
Binder binder, Object[] parameters, CultureInfo culture) at System.RuntimeType.CreateInstanceImpl(BindingFlags bindingAttr, Binder binder, Object[] args, CultureInfo culture, Object[] activationAttributes) at
Microsoft.SharePoint.Workflow.SPWorkflowManager.LoadPluggableClass(String classname, String assembly, Object[] parameters) at Micr... b72f3008-fc65-400c-815d-393ccd1c8932
09/19/2014 02:04:38.12* Microsoft.Office.Project.Server (0x100C) 0x1C20 SharePoint Foundation Workflow Infrastructure 72fq Unexpected ...osoft.SharePoint.Workflow.SPWorkflowManager.GetService(SPWorkflowAssociation
association, SPWorkflowEngine engine) at Microsoft.SharePoint.Workflow.SPWorkflowManager.RunWorkflowElev(SPWorkflow workflow, Collection`1 events, SPWorkflowRunOptionsInternal runOptions) at Microsoft.SharePoint.Workflow.SPWorkflowManager.StartWorkflowElev(Object
context, SPWorkflowAssociation association, DateTime elevationTimeUtc, SPWorkflowEvent startEvent, SPWorkflowRunOptions runOptions) b72f3008-fc65-400c-815d-393ccd1c8932
09/19/2014 02:04:38.12 Microsoft.Office.Project.Server (0x100C) 0x1C20 Project Server Project Server Workflow
ai7z Verbose Error is: WorkflowExceptionStartingWorkflow. Details: . Standard Information: PSI Entry Point: Project User: HALAMERICA\H139933 Correlation Id: b72f3008-fc65-400c-815d-393ccd1c8932 PWA Site URL:
http://devpsepm4tech.corp.halliburton.com/PWA SSP Name: Project Server Service Application PSError: WorkflowExceptionStartingWorkflow (35115) b72f3008-fc65-400c-815d-393ccd1c8932
09/19/2014 02:04:38.13 Microsoft.Office.Project.Server (0x100C) 0x1C20 Project Server General
b0ry Medium PWA:http://devpsepm4tech.corp.halliburton.com/PWA, ServiceApp:Project Server Service Application, User:HALAMERICA\H139933, PSI: [ProjectServerError] Mismatched Attributes for PSErrorID WorkflowCannotChangeWorkflow. List of
defined attributes: none. List of provided values: 05c80469-125d-44bc-853b-b906f7e1076a, Microsoft.Office.Project.Server.BusinessLayer.QueueMsg.WorkflowChangeWorkflowMessage, 1, DontBlock. b72f3008-fc65-400c-815d-393ccd1c8932
09/19/2014 02:04:38.13 Microsoft.Office.Project.Server (0x100C) 0x0178 Project Server Queue
954
Geeth If you feel that the answer which i gave you is Helpful please select it as Answer/helpful. -
OPMN start failed - but I can see opmn -d running via ps -ef
I am trying to figure out why I keep getting the message OPMN start failed when trying to start OPMN. The thing I don't understand is why I can see the processes opmn -d running when I look via ps -ef.
If I run the opmnctl startall command once more then everything comes up and no error messages.
Any Ideas?I had the same isssue.
Unix Solaris 10, Oracle Application Server 10gr2
After starting the infrastructure database and listener the issuing of opmctl startall (starting HTTP Server, OID, OC4J_SECURITY) failed with opmnctl: opmn start failed from time to time.
In addition, when starting the application server processes (Forms Container...) the processes will rereive a timeout and die later.
Reading the server logs (e.g. $ORACLE_HOME/dcm/logs/emd_logs/log.xml) on the infrastructure but also on the application server delivered :
oracle.ias.repository.schema.SchemaDescription: Unable to establish connection to the Oracle Internet Directory Sever
I came to the impression that the database listener process potentially was not yet fully initialized to receive requests
from the upstarting infrastructure processes due to the fact that the commands will get issued in a startup-script.
Solution : after starting the listener (before starting up the infrastructure processes) I entered sleep 10 (wait 10 seconds) in the startup-script, the problem is gone by now...
Maybe you are looking for
-
Video options almost all grayed out -- but camera works
+(Accidentally posted this in iChat 3.0 forum: meant to post here)+ A number of quite important options are grayed out of my iChat, and I don't know why. For example, under Buddies, I can't select anything under "Send Instant Message". Most important
-
HT201317 when I back up my iphone i lost all the photos in photo stream, where are they?
while I was backing up my phone, i lost all my photos in Photo Stream, can't find them anywhere, where have they gone?
-
Hi, can someone tell me why this update compiles with compilation error? CREATE OR REPLACE PROCEDURE updateName (fname IN varchar2, newname IN varchar2) IS BEGIN Select fname FROM name_tab WHERE fname = fname UPDATE name_tab SET newname = newnam
-
I wanted to know what is the difference between these two types of database links: create public database link <> connect to <> identified by <> using 'XYZ'; and create public database link <> connect to <> identified by <> using '(DESCRIPTION = (ADD
-
Cannot access a work IP address
I am working from a MacBook Pro. I work from home. I cannot access two work websites. I also cannot access my work e-mail. My two work websites have the same IP address. I had AT&T come out after extensive time on the phone with their 2nd tier tech g