License for jms implementation
Hi, I am planning to implement a light-weight JMS implementation to suit my work. I want to know whom to contact for getting a go-ahead regarding the license for specification. Could anyone from Sun team if they have seen this post respond OR anyone who knows the process to be followed.
Thanks
~Venkat
Hi v.
I do not think u need any license for the specification.
Similar Messages
-
License for Crystal Report for Visual Studion 2005
Hi All,
I am developing reports for my application using crystal reports for VS 2005. I read on microsoft site (http://support.microsoft.com/kb/318102 ) that the free server software supports three active requests to the server. It further says that developer will need to purchase additional licenses to increase scalability. I think that our application would need the additional license. However, i was unable to find a link on business objects site were i can buy the additional license for crystal report for VS 2005. The link takes me to license for Crystal report 2008. It would be great if you can answer my following questions:
- what version of crystal reports do we need to purchase?
- do we need license for each implementation or do we need license for the developers only.
Thank you.
Best regards,
AbdulGreat questions! Let's get at em, one at a time:
How would you define a print job?
- A print job will essentially be consumed any time the print engine (crpe32.dll) needs to do work. So, processing one report = a print job. However, say you have one subreport, now the number of print jobs = 2. Now, say the subreport is in the details section and runs once per record. And you have 100 records. You will be running 1 + 100 print jobs. Paging to another page consumes a print job. Zooming consumes a print job, exporting and printing to a printer consumes a print job. So, depending on the report and the number of users, print jobs may be used up quite quickly. You can increase the print job limit by modifying the PrintJobLimit in the registry. For CR 2008, the reg entry is here:
HKLMsoftware usiness objectssuite 12.0
eport application serverinprocserver
(the above is used irrespective of the SDK (CR, RAS, BOE))
I am not using report viewer to render the report. I use 'ExportToDisk' method to save the report in word or pdf format. Does 'ExportToDisk' make one print job?
- see above. Again, if the report has a subreport, this will consume at least two print jobs.
How much time does a typical print job takes to complete?
- no way to tell in general terms. There are too many variables that will affect this. From how complex the report to database connections to version of runtime
What care shall I take to reduce the print job time?
- Best you can do is ensure that you are destroying the report object once you are done with it (report.close, report.dispose)
Will using Report Application Server (RAS) or Business Objects Enterprise increase the number of concurrent print jobs? If yes then by what amount?
- no it will not
To utilize Report Application Server (RAS) or Business Objects Enterprise, do I just need to use a specific SDK or is there some thing more to it?
- You do need to use the RAS assemblies for RAS, BOE assemblies for BOE. More information is below.
Sample RAS apps:
https://boc.sdn.sap.com/samples/84/1194
An article on RAS:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b840c0-623f-2b10-03b5-9d1913866b32
A power point as to which may be the best SDK to use:
https://boc.sdn.sap.com/node/972
Differences between all the SDKs (webinar):
https://www.sdn.sap.com/irj/sdn/crystalreports-dotnet?rid=/webcontent/uuid/106b8996-067e-2b10-2f8a-d8c136b3e330
BOE samples:
https://boc.sdn.sap.com/samples/84/1193
BOE SDK library:
http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm
Ludek -
IS JMS implementation available for BMQ?
Hi,
I have an exposure to BMQ middleware and we have been accessing this thru the C libraries and now since we are moving to java, i would like to know if there is JMS support for BMQ and if so where can i find/download the JMS implementation
Hi Dheepak,
I think you are referring to MessageQ. There is a pure
java client, although it is not a JMS client. I'm not sure
how it is packaged or licensed. Contact BEA sales and they
should be able to track it down for you. If they have trouble,
feel free to give them my name.
Tom, BEA
Dheepak wrote:
> Hi,
> I have an exposure to BMQ middleware and we have been accessing this thru the C libraries and now since we are moving to java, i would like to know if there is JMS support for BMQ and if so where can i find/download the JMS implementation
-
JMS implementation of P2P protocol: need for statefulness!
Hello!
I have to implement the Chord peer-to-peer protocol using JMS. I'm thinking of using a message-driven bean per node in order to manage asynchronous communication (and I've been able to make this work).
The problem is that the protocol requires that every node keep some information about its neighbours, about the data it manages, etc.
This means I have to keep a state of the node, which doesn't seem to be possible if I use EJBs.
I think that a possible solution might be to couple the message-driven JMS bean with a session bean, and instruct the message-driven been to forward to the session bean the messages it receives. This should allow the session bean to manage the state of the node, while leaving the communication stuff to the message-driven bean.
My doubts are:
- How can the message-driven bean find and contact the associated session bean?
- Is this design practical?
Thank you!You are accessing the runtime mbean of a JMS destination. The JNID name of a destination is not available on the runtime destination MBean.
If you are using jms-system-resource to deploy your JMS module, you should be able to access the deployment mbean of the destination. The starting MBean for JMS is JMSSystemResourceMBean in this case. -
Examples for JMS Error Queue implementation in BPEL
Hi ,
Please anyone provide me examples for JMS error queue implementaion in BPEL.
Regards
Narsi pHi Narsi p,
Please remember to mark answers accordingly... Helpful or correct, following the forum rules
https://forums.oracle.com/forums/ann.jspa?annID=330
Can you tell us more about what are you trying to achieve here?
If you are just trying to configure an error queue to put the messages that couldn't be delivered, you can do this in weblogic directly.
Configuring an Error Destination for Undelivered Messages
http://docs.oracle.com/cd/E17904_01/web.1111/e13727/manage_apps.htm#JMSPG254
Cheers,
Vlad -
License for testing and production systems
Hi Experts
Can any one help me out on implementing license in my B1 System.
According to our contract we have licensed following user types:
User Type
Licensed
AddOn Access License 25
Professional User 5
Software Development Kit - Development Version 20
We have Test/development system in one hardware and Production system on different hardware. Please advice me how to request/allocate license for my test/development system and production system.
We tried creating a Test System in SAP Market place and requested license for test system. While requesting license for production system, it is found that the license is exceeded. In other words, developent system license also counted.
Please advice me on the best practices of B1 license implementation.
Thanks and regards
Ajith GHi,
Our customer wants to Keep the production data secure. Developers and consultants should not have the access to it.
Then you have only two options:
1.Either you should maintain a standalone b1 server for the developers and consultants to test their solutions and scenarios.
2.Otherwise you can create users in sql studio for accessing only the test database.
So that as per your requirement
All configurations and sample data will be kept in a test environment where developers and consultants can do their work.Once everything is correct Admin will do the transfer to production.
Note:New users can be created in the sql studio under Databases-><Company Db>->Security->Users, Rt.click new user -
Concurrency for JMS Sender Adapter - Async/Sync Bridge
Hi,
We have implemented a number of Async/Sync bridges using JMS Adapters, and are encountering problems scaling the solution.
Async-Sync Bridge Scenario:
JMS Sender Adapter -> Integration Server -> Sync ABAP Proxy (CRM) -> JMS Receiver Adapter
The bridge is using the Adapter Framework modules: RequestResponseBean & ResponseOnewayBean within the Sender Adapter.
The problem is that concurrency of processing seems to be driven from the number of Java Server Cluster Nodes on the Adapter Engine. The JMS sender adapters do not appear to read from the external messaging system (MQ) in a concurrent fashion. They appear to process in a sequential manner per Adapter:
1. Read from request Message Queue (MQ)
2. Send request for processing (IS)
3. Wait response message
4. Receive response message
5. Write response message to Message Queue (MQ)
6. Read from request Message Queue (MQ)
7. Send request for processing (IS)
8. Wait response message
9....
We need to be able to introduce some means of scaling the solution so that mesages can be read from the MQ request message queue in a concurrent manner. Hopefully we can do this without adding more javer server nodes to the Adapter Engine.
We were looking intot he possibility of tuning AS Java properties that control the number of connections to the Messaging System of the Adapter Engine but this has not provided a solution.
Any information on this topic would be much appreciated.
regards
MurrayAs far as I know, the only wasy for JMS adapter to do concurrent reads from a queue is by having multiple server nodes. This is document in note 856346, point 6.2
Thanks
KK -
Java TV 1.1 License for Maven
Hello, there.
Can anybody tell me whether I can or not upload Java TV 1.1.1 sources (and recompiled classes) to Maven Central Repository?
I'm a TV application developer.
And I want to make a JavaTV artifact for development.
I read the license text, but I don't think I'm a layer.
Here comes what I want to do.
1. Download JavaTV 1.1.1 Source distribution.
2. Make an artifact only contains javax.tv.* and javax.media as JSR-927 specified.
3. Deploy it to the Maven Central Repository.
4. Use it for compilation.
I swear I won't touch anything.
SUN COMMUNITY SOURCE LICENSE
(Rev. Date January 5, 2006)
Java TV API Technology v. 1.1
RECITALS
Original Contributor has developed Specifications and
So urce Code implementations of certain Technology; and
Original Contributor desires to license the Technology
to a large community to facilitate research,
innovation and product development while maintaining
co mpatibility of such products with the Technology as
delivered by Original Contributor; and
Original Contributor desires to license certain Sun
Trademarks for the purpose of branding products that
are compatib le with the relevant Technology delivered
by Original Contributor; and
You desire to license the Technology and possibly
certain Sun Trademarks from Original Contributor on
the terms and conditions specified in this License.
In consideration for the mutual covenants contained
herein, You and Original Contributor agree as follows:
AGREEMENT
1. Introduction. The Sun Community Source
License and effective attachments ("License") may
include five distinct licenses: Research Use, TCK,
Internal Deployment Use, Commercial Use and Trademark
License. The Research Use license is effective when
You execut e this License. The TCK and Internal
Deployment Use licenses are effective when You execute
this License, unless otherwise specified in the TCK
and Internal Deployment Use attachments. The
Commercial Use and Trademark licen ses must be signed
by You and Original Contributor in order to become
effective. Once effective, these licenses and the
associated requirements and responsibilities are
cumulative. Capitalized terms used in this License
are defined in the Glossary.
2. License Grants.
2.1. Original Contributor Grant. Subject to Your
compliance with Sections 3, 8.10 and Attachment A of
this License, Original Contributor gra nts to You a
worldwide, royalty-free, non-exclusive license, to the
extent of Original Contributor's Intellectual Property
Rights covering the Original Code, Upgraded Code and
Specifications, to do the following:
a) Research Use License:
(i) use, reproduce and modify the Original
Code, Upgraded Code and Specifications to create
Modifications and Reformatted Specifications for
Research Use by You,
(ii) publish an d display Original Code,
Upgraded Code and Specifications with, or as part of
Modifications, as permitted under Section 3.1 b) below,
(iii) reproduce and distribute copies of
Original Code and Upgraded Code to Licensees and
students for Research Use by You,
(iv) compile, reproduce and distribute
Original Code and Upgraded Code in Executable form,
and Reformatted Specifications to anyone for Research
Use by You.
b) Other than the licenses expressly granted in
this License, Original Contributor retains all right,
title, and interest in Original Code and Upgraded Code
and Specifications.
2.2. Your Grants .
a) To Other Licensees. You hereby grant to each
Licensee a license to Your Error Corrections and
Shared Modifications, of the same scope and extent as
Original Contributor's licenses under Section 2.1 a)
above relative to Research Use, Attachment C relative
to Internal Deployment Use, and Attachment D relative
to Commercial Use.
b) To Original Contributor. You hereby grant to
Original Contributor a worl dwide, royalty-free,
non-exclusive, perpetual and irrevocable license, to
the extent of Your Intellectual Property Rights
covering Your Error Corrections, Shared Modifications
and Reformatted Specifications, to use, reprodu ce,
modify, display and distribute Your Error Corrections,
Shared Modifications and Reformatted Specifications,
in any form, including the right to sublicense such
rights through multiple tiers of distribution.
c) Other than the licenses expressly granted in
Sections 2.2 a) and b) above, and the restriction set
forth in Section 3.1 d)(iv) below, You retain all
right, title, and interest in Your Error Corrections,
Shared Modifications and Reformatted Specifications.
2.3. Contributor Modifications. You may use,
reproduce, modify, display and distribute Contributor
Error Corrections, Shared Modifications and
Reformatted Specif ications, obtained by You under this
License, to the same scope and extent as with Original
Code, Upgraded Code and Specifications.
2.4. Subcontracting. You may deliver the Source
Code of Covered Code to othe r Licensees having at
least a Research Use license, for the sole purpose of
furnishing development services to You in connection
with Your rights granted in this License. All such
Licensees must execute appropriate document s with
respect to such work consistent with the terms of this
License, and acknowledging their work-made-for-hire
status or assigning exclusive right to the work
product and associated Intellectual Property Rights to
< p>You.
3. Requirements and Responsibilities.
3.1. Research Use License. As a condition of
exercising the rights granted under Section 2.1 a)
above, You agree to comply with the following:
a) Your Contribution to the Community. All Error
Corrections and Shared Modifications which You create
or contribute to are automatically subject to the
licenses granted under Section 2.2 above. You are
en couraged to license all of Your other Modifications
under Section 2.2 as Shared Modifications, but are not
required to do so. You agree to notify Original
Contributor of any errors in the Specification.
b) So urce Code Availability. You agree to
provide all Your Error Corrections to Original
Contributor as soon as reasonably practicable and, in
any event, prior to Internal Deployment Use or
Commercial Use, if applicable. Origina l Contributor
may, at its discretion, post Source Code for Your
Error Corrections and Shared Modifications on the
Community Webserver. You may also post Error
Corrections and Shared Modifications on a web-server
of Your choice; provided, that You must take
reasonable precautions to ensure that only Licensees
have access to such Error Corrections and Shared
Modifications. Such precautions shall include,
without limitation, a password p rotection scheme
limited to Licensees and a click-on, download
certification of Licensee status required of those
attempting to download from the server. An example of
an acceptable certification is attached as Attachment
A-2.
c) Notices. All Error Corrections and Shared
Modifications You create or contribute to must include
a file documenting the additions and changes You ma
Edited by: 880157 on Aug 18, 2011 6:50 AMHello,
I'm trying to run the samples wich came with the
reference implementation 1.1_01 of the Java TV,but
I'm a bit confused, the media.TestMedia cant runon
my machine.
I try to run with normal java (jdk 1.5) and usingthe
all new CDC toolkit emulator,
with both I can run the SvcDispXlet , but neitherrun
the TestMedia, that should play an .mov video, if
someone interest in helping me, I can send all the
information, perhaps we can open a topic just for
this...
Some questions...:
1 - Anyone run this samples?
2 - There are any other way of run Java TV Xlet,
except using XletView ( I will make applicationsfor
ISDB-T and will NOT use MHP at all...) ??????
3 - There are a complete (final) version of theJava
TV implementation(non-free its good too)? -
Oracle 8i vs 9i JMS implementation?
Hi,
We are thinking about using 9i instead of 8i.
We know that 8i is not 100% JMS compliant but the question is - is 9i?
In short, does it support the onMessage method, more than one session per connection and JNDI lookup? Oh, and do you still need to downcast to subscribe to topics?
If anyone out there knows the answers you could save us some time and effort.
Any other comments would also be welcome.
Many Thanks
Kevin.Hi,
I was wondering what you have learned about this issue, Oracle 9i JMS implementation. My specifics are that I am trying to learn whether or not Message driven beans are supported, and if not, what the recommended method is for managing many Async message listeners to a topic. I think that 9i only supports J2EE 1.1 which would imply no MDB support.
Thanks,
Peter -
Creating data server for JMS Queues in ODI
hi,
I am trying to create data server for JMS Queues in ODI.
I am getting following error:
java.sql.SQLException: Cannot load connection class because of underlying exception: 'javax.jms.JMSException: Cannot find the Connection Factory (jms/QueueConnectionFactory) in JNDI'.
To implement this, I am giving following parameters:
JNDI driver : com.evermind.server.rmi.RMIInitialContextFactory
JNDI url : ormi://localhost/default
JNDI resource : jms/QueueConnectionFactory
Please help.
Thanks,
MonikaHi,
according to docs
http://docs.oracle.com/cd/E23943_01/integrate.1111/e12644/hypersonic_sql.htm#ODIKM590
i see
JDBC Driver: org.hsqldb.jdbcDriver
JDBC URL: jdbc:hsqldb:hsql://<host>:<port>
could you modify
JDBC Driver : org.hsqldb.jdbc.JDBCDriver
JDBC Url : jdbc:hsqldb:hsql://localhost
according to docs?
Thanks -
Which License is good OEM, OLP or Volume Licensing for small company
Dear Admins,
Actually I am setting up a lab for a small company with 25 users. Confused which license to purchase. Vendor sent us quotation in which he mentions we have to purchase "HP Server DL-380 -G8 Intel Xeon 2.5GHZ " in order to install windows server
2008 R2 OEM Edition CD. Actually I just want to know. Can't we purchase a assembled computer/Machine and purchase Windows Server 2008 R2 OEM CD for successful implementation?. Now, My question to you is. What is this OLP and OEM. Does OLP mean
we can install Windows Server in assemebled computer or machine and OEM means only dedicate company machine is capable to install OEM edition, Just confused, Please let me know. It is just a small company with 25 users. What do you recommend. Thank you for
your support.
Best Regards,
Fahad Ahmed.Hi Fahad,
Couple of things to remember as well
OEM licences comes with the machine probably you have seen laptops and desktop has a windows key sticker that's an OEM license. Only limitation with OEM is you can't use OEM license anywhere else then the machine you have bought it with. If an OEM license
machine dies license will die as well.
With volume license you have the freedom to move around the license. If you have only one license on one machine at one time.
Also when you buy a windows server license it comes with 5 user CALs. So that's why you have to buy 20 more.
Now if you want to know what are the CALs, so CAL is a Client Access License require for a
user/device to access windows server. For example if you have a user and he wants to access share files or printer from the server you will require a user CAL. So if 25 users will access the Server you will require 25 CALs.
Best thing to do is to speak with your account Manager from Dell or HP regarding the license side as normally they are really good in helping.
Hope this helps :) -
Difference between EDN-DB and EDN-JMS implementation
Experts,
Looking for a difference between EDN-DB and EDN-JMS implementation. We have EDN implementation going on, where multiple source systems will be publishing business events. Events can be published using SOA Suite or JMS Bridge from AQ and MQ. In this scenario which implementation approach is suited better ?Oracle Apps Adapter can be used for many other products other than E-Business Suite (JD Edwards E1, OTM, and others). The apps adapter was mainly used in ERP systems and was strong when you needed have added functionality other than just polling a db for a status / calling a stored procedure... It could connect out to other business services, xml gateways and so-on.
From a technical aspect / development perspective I always thought of that the Oracle Apps Adapter simplifies the development but, may is not flexible. The App Adapter's strength is the services that are difficult to integrate with (business services, xml gateway). If you need to hook in to these types of services, use the APPS adapter. (Again like it is named the "Apps Adapter" its for interacting w/ other applications to enable real-time processing / functionality.
That being said the dbAdapter can be very powerful but, like it is named is database focused (to poll some table to know when to kick off other logic and enable real-time functionality through database interaction.
Looking at the Oracle 12C Roadmap I had heard that there is more planned for the Oracle Apps Adapter moving forward, especially as Anuj said in the "Financial Apps" side of the isle at Oracle. Who knows what is real and what isn't though =]
Hope this helps!
-Luke -
SQL standard 2012 licenses for SCCM 2012 R2
Hi,
We are implementing SCCM R2 for customer, is the license for SQL standard 2012 included in price for SCCM licenses, we have around 5000 mahcines to be managed also a Secondary with express edition installed .
can secondary and primary have different version of SQL for replication ? or it should be same version?
is there a requirement for SQL standard like processor (How many number of processer can be used if this
license is free of cost for SCCM2012 (any limitations ) ) Is license cost calculated based on processor ?
also how many DB can be installed with standard on single instance ? can we use it for WSUS, MDT DB?
how will i get this SQL standard free version from Microsoft any download location.
Please advise.
Thanks
ShuaibSQL Server Standard is included with all System Center products. As Tim said CPUs are irrelevant in this case.
You can use whatever versions of SQL you like as long as they are supported. However isn't it always best to standardise.
You can install as many databases as you like as long as they are System Center related - the ones you mentioned are OK.
The customer should download SQL from their Microsoft Volume Licensing Center. If they choose the SQL that is bundled with System Center it will be pre-populated with a license key.
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
Licenses for 5545x. "How to install licenses from CD?"
Hello
I have (4) new ASA5545x'
I also received (2) sets of the following licenses which came CD in white cardboard envelopes:
-Cisco ASA 55xx Series
Any Connnect Mobile
ASA 5545 License
Product: ASA-AC-M-5545=
The Product key is in the envelope
-Cisco ASA 5545-X CX AVC
and Web Security Essentials (3 year Promo)
ASA 5545 License
Product: ASA5545-AW3Y-PR=
The Product key is in the envelope
-Cisco Any Connect 55xx Series
Phone Licenses
Product: ASA-AC-PH-5545=
The Product key is in the envelope
The ASA's will be configured for HA
Can someone provide a step-by-step guide for this implementation.The Mobile and Phone licenses must be installed on the ASA proper. Here is a link to the procedure.
While you are on the ASA licensing portal, also check on your unit to make sure you have the (free) 3DES-AES license activated. If not, you can also request that on the portal.
The AVC and WSE license combo is on the NGFW / CX module and must be activated from within the PRSM (Prime Security Manager - the management GUI) after you've performed the initial setup per the Quick Start Guide. Here is a link to the "Managing System Licenses" section of the PRSM User Guide. -
Does the Weblogic JMS implementation use the Time-To-Live values?
I am trying to send a message to a Queue with a time-to-live. The only way that
I can get this to work is by going into the console, and setting a default value
on either the Queue or the connection factory. But this is not the behavior I
want. I would like to do this programmatically instead so it can be property
driven and a Sys Admin can change it easily.
I downloaded the JMS spec and saw that you are supposed to set the time to live
when calling the MessageProducer's send message. I did this, but it doesn't work.
Is anybody else having this problem? Does Weblogic's JMS implementation just
ignore this value? Or do I have my Queues and other JMS components set up incorrectly?
P.S. All of my time-to-live overrides are set to -1 in the console, so my time
to live set in the program should be respected.
Tom,
I was able to track it down to a programming error. Thanks for your help.
Dan
Tom Barnes <[email protected]> wrote:
>Hi Daniel,
>
>Yes, client-specified message expiration works. I suspect
>a programming error. First take a look and make sure that you are
>not making the common mistake of trying to set the value
>directly on the message, rather than on the producer - as per
>the JMS spec and JMS javadoc, setting this value directly
>on message will have no effect as the producer's value
>will always override it. If this isn't the case,
>please post your code and I'll take a look.
>
>FYI Note that all management fields can be programmatically
>set as well. Since you want programmatic administrative
>control, this means that you have the option of
>programmatically configuring the destination's time-to-live
>override field if you so wish.
>
>Tom
>
>Daniel Livesay wrote:
>
>> I am trying to send a message to a Queue with a time-to-live. The
>only way that
>> I can get this to work is by going into the console, and setting a
>default value
>> on either the Queue or the connection factory. But this is not the
>behavior I
>> want. I would like to do this programmatically instead so it can be
>property
>> driven and a Sys Admin can change it easily.
>>
>> I downloaded the JMS spec and saw that you are supposed to set the
>time to live
>> when calling the MessageProducer's send message. I did this, but it
>doesn't work.
>> Is anybody else having this problem? Does Weblogic's JMS implementation
>just
>> ignore this value? Or do I have my Queues and other JMS components
>set up incorrectly?
>>
>> P.S. All of my time-to-live overrides are set to -1 in the console,
>so my time
>> to live set in the program should be respected.
>
Maybe you are looking for
-
Why is this happening???? Only This Ilife application is like this I reinstalled my ilife 11 and everything is up to date???
-
What is a good photo duplicate finder software?
What is the best photo duplicate finder software for my new iMac?
-
Apple TV home sharing not working with iTunes 11.2.2
Home sharing has been turned on on both the apple tv as well as iTunes. I'm trying to access my computer library. I've tried all the methods on the support page. Both iTunes and ATV are up to date. All help would be great. Thanks!
-
Cache as bitmap and blend modes problems
Hello, I have little problem here. Let's say I have movieClip mc1 and inside it has movieClip mc2 (nested). If I set any blend mode to mc2 and then turn cacheAsBitmap on for mc1, the blend mode is not displayed at all. I have noticed this problem in
-
Hi - I tried setting a button <mx:Button> width via CSS but the "width" tag does not effect the button. Rich