License problem, Could you help me?

I have install a license to my ecc6 system using slicense.
but when I use saplicense command in AIX os, I get this message:
tsmtestserver:prdadm 8> saplicense -test pf=/sapmnt/PRD/profile/PRD_DVEBMGS00_tsmtestserver
Protocol saplicense test:
Read sapsytem name
       ok, sapsytem name = PRD
Read message server host
       ok, host = tsmtestserver
Read message server service port
       ok, service port = sapmsPRD
Connect to message server
       ok, connect done
Read hardware key from message server
       ok, got hardware key
Detach from message server
       ok, detached
Check hardware key
       ok, hardware key = R1067493288
Connect to database
       ok, connected
Check license
       ok, check done
Disconnect database
       ok, database disconnected
test result: license test failed
no valid license found ***
tsmtestserver:prdadm 9> saplicense -show
saplicense: no license entries found
tsmtestserver:prdadm 10> saplicense -get
saplicense: HARDWARE KEY = R1067493288
why in OS, the system do not know the license I installed from GUI.
thanks

Hai,
Try this, saplicense -test pf=<Profile> TRACE=2. This will you locate the source of the problem.
http://help.sap.com/saphelp_nw04/helpdata/EN/a7/512caf407a11d1893b0000e8323c4f/frameset.htm
You should have made some typing error will installing the license, please check the following link for some useful SAP Notes.
http://help.sap.com/saphelp_nw04/helpdata/EN/67/4c8838c04b275de10000009b38f8cf/content.htm
Regards,
Yoganand.V

Similar Messages

Question about sap license audit,could you help me

how many users can my test system use ? Does SAP concern the users I used in test system ?
could you give me some information about that? thanks a lot.

Hi,
We have hundreds of user on our production system, and several developer user and have been go live several years ago (SAP R/3) and proceed license audit annualy.
Typically, license audit is calculated by the number of user on your production system and the number of developer user on your (development) system. Hence, the number of usual user (which is not developer user) on your test system should not be brought into SAP license audit calculation.
to proceed, first you have to clasify contractual user type via SU01, and then proceed it using USMM transaction.
hope it help you,
rgds,
Alfonsus Guritno

From Sweeden - could you help me please ( i've tryed to do that for almost one day)

i thing i have aloop problem, could you help me please. i trying to do if user not put in correct value (number instead of a letter or vice versa ) how can the program go back to first menu ( i have been studying for 3 weeks)
enter code here
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
namespace @break
class Program
static void Main(string[] args)
//Meny
Console.WriteLine("\n HÄNGA GUBBE\n");
Console.WriteLine(" 1) Lägg till ord");
Console.WriteLine(" 2) Lista alla ord");
Console.WriteLine(" 3) Spela");
Console.WriteLine(" 4) Avsluta");
int Valet;
Console.Write("\n\tVälj 1-4: ");
Valet = int.Parse(Console.ReadLine());
switch (Valet)
case 1:
Console.WriteLine("\n lägg ett till ord! ");
break;
case 2:
Console.WriteLine("\n Lista med alla ord :\n");
string[] array = { " Lev", " Skratta", " Gledje", " Gråt", " Njut" };
Array.Sort<string>(array);
foreach (var c in array)
Console.WriteLine(c);
Console.WriteLine("\n");
break;
case 3:
string guesses, bokstäver;
Console.Write("\n Hur många fel får man ha? ");
guesses = (Console.ReadLine());
Console.WriteLine(" Utmärkt, då spelar vi!\n");
Console.WriteLine(" Felgisningar :" + "0/" + guesses);
Console.Write(" Gissade bokstäver " );
bokstäver = (Console.ReadLine());
Console.WriteLine("Aktuellt ord");
Console.Write("Gissa bokstav : "+bokstäver+" \n");
break;
case 4:
Console.WriteLine("\n HEJ DÅ! \n");
Console.Beep();
break;
//avbryter while loopen, avslutar spelet

What do you mean by "lots of problem"? The code I posted certainly compiles and runs just fine. Copy the following code into your Program.cs file in Visual Studio and run it and you will see that it works:
using System;
namespace ConsoleApplication1
class Program
static void Main(string[] args)
//Meny
Console.WriteLine("\n HÄNGA GUBBE\n");
Console.WriteLine(" 1) Lägg till ord");
Console.WriteLine(" 2) Lista alla ord");
Console.WriteLine(" 3) Spela");
Console.WriteLine(" 4) Avsluta");
bool exit = false;
do
int Valet;
Console.Write("\n\tVälj 1-4: ");
try
Valet = int.Parse(Console.ReadLine());
catch (Exception)
Console.WriteLine("Error....!");
continue;
switch (Valet)
case 1:
Console.WriteLine("\n lägg ett till ord! ");
break;
case 2:
Console.WriteLine("\n Lista med alla ord :\n");
string[] array = { " Lev", " Skratta", " Gledje", " Gråt", " Njut" };
Array.Sort<string>(array);
foreach (var c in array)
Console.WriteLine(c);
Console.WriteLine("\n");
break;
case 3:
string guesses, bokstäver;
Console.Write("\n Hur många fel får man ha? ");
guesses = (Console.ReadLine());
Console.WriteLine(" Utmärkt, då spelar vi!\n");
Console.WriteLine(" Felgisningar :" + "0/" + guesses);
Console.Write(" Gissade bokstäver ");
bokstäver = (Console.ReadLine());
Console.WriteLine("Aktuellt ord");
Console.Write("Gissa bokstav : " + bokstäver + " \n");
break;
case 4:
Console.WriteLine("\n HEJ DÅ! \n");
Console.Beep();
exit = true;
break;
//avbryter while loopen, avslutar spelet
} while (!exit);
If you can't get this to work despite someone actually giving the exact code you should probably ask some developer to help you.
If you have some logical issues in your code that's another issue. Please start a new thread if you have a new question.
Note that the forums are not for anyone else to write an entire application or class for you though :)
Please remember to close your threads by marking helpful posts as answer.

TS1453 Hi, I bought Apple tv traying to rent a movie but there problem with itunes, and there is on apple tv don't have my country. could you help me please how can I solve this problem?

Hi, I bought Apple tv traying to rent a movie but there problem with itunes, and there is on apple tv don't have my country. could you help me please how can I solve this problem?

Whinston,
I live in Azerbaijan. Recently I bought apple tv in New York. When I come back to my country tried to rent movies from my country but couldn't find my country name on apple tv menu, so there is a problem I don't know how to fix it. is there have another way to take a rent movies?

Hello. the last month i face a problem with youtube at my macbook. most videos stop playing after maybe 20 - 25 sec. the same time the time bar stops moving. could you help me solve the problem? thank you

hello. the last month i face a problem with youtube at my macbook. most videos stop playing after maybe 20 - 25 sec. the same time the time bar stops moving. could you help me solve the problem? thank you

hello. the last month i face a problem with youtube at my macbook. most videos stop playing after maybe 20 - 25 sec. the same time the time bar stops moving. could you help me solve the problem? thank you

TS3716 My relatively new ipod touch 16 gb either does not show up as a drive or everytime says it does not recognize my ipod when connected to add music. I didn't have problems loading music originally, but this is a new occurrence. Could you help?

My relatively new ipod touch 16 gb either does not show up as a drive or everytime says it does not recognize my ipod when connected to add music. I didn't have problems loading music originally, but this is a new occurrence. Could you help?

Hey, Thanks a lot. It took quite a bit of time to resurrect this ipod. I tried the upgrade again, but still would not recognize my ipod. So I went to the next step and reset my ipod, wiping of all of the information like it was new. This helped my laptop see the ipod on itunes, but did not sync. So, I deleted the itunes off my computer completely, restarted and then reinstalled the newest itunes, and then restarted. Finally, it recognized my ipod and started to download each song. It took awhile as there was 602 songs, but finally it works. Yea!!! I never had any problem with my old nano, but this touch has been another animal for sure. Thank you again and also the community for information. This was a helpful forum and will recommend to others if they get stuck with their ipod or iphone. Take care, Karen

Apple Mobile Device USB Driver is listed in device manager, but has a yellow "!". I try reinstall,disable,enable the drivers but the problem persist. Could you help me ?

Hi
I connect my ipad to my pc (Windows xp SP3) and I can see my ipad and photos in my computer. When I install the itunes 11 , after installation , I can't connect the ipad again or any other apple device. The Apple Mobile Device USB Driver is listed in device manager, but has a yellow "!".
I have try to reinstall the drivers from c:\progamfiles\common files\apple\... but the problem persist. Could you help anyone about this ?

You need to completely uninstall iTunes from your computer and then download and install it again.
You do know that Microsoft has a web site, right?

I have tried to ask for a refund in apple store but after clicking on 'Report a problem' at the corresponding purchase I wasn't routed to Apple's website. Could you help?

I have tried to ask for a refund in apple store for an application that I downloaded by mistake. It works only for iPad and iPhone and not for my mac.But after clicking on 'Report a problem' at the corresponding purchase I wasn't routed to Apple's website. Could you help?

Hi Peggy,
There's an endless combination of Internet plugins that you might need for a particular website, from Flash to Java, to Windows Media to some other streaming/media protocol. Probably what's helpful here is either of the name of the plugin that you're being asked for or the website(s) you're accessing that require them. I suspect it's probably a media plugin, like Flash, Windows Media or some DivX type plugin but that's just a guess with the information provided.

My friend have problem in his system in macbook pro. after he update it. the macbook get restart every 10min. he so upset. please could you help him? thanks

hello best stor in the world
my friend have problem in his system in macbook pro. after he update it. the macbook get restart every 10min. he so upset. please could you help him?
thanks

thanks, but he wants this updeta.
because has many specile features not found in the old update

I'm experimenting. Could you help me? I have a problem.

I'm experimenting with an app I've made in Xcode. I have a button, that displays the social networks (on click) only if the user drops an image into the image view. Otherwise the button does nothing. I would like to display the alert saying "You have to drop an image into the app." or something like that. Could you help me?
Tiny part of the code is down there...
- (IBAction)shareToService:(id)sender {
    NSMutableArray *shareItems = [NSMutableArray arrayWithObject:[self.textView string]];
    NSImage *image = [self.imageView image];
    if (image) {
        [shareItems addObject:image];
        NSSharingServicePicker *sharingPicker = [[NSSharingServicePicker alloc] initWithItems:shareItems];
        sharingPicker.delegate = self;
        [sharingPicker showRelativeToRect:[self.shareButton bounds] ofView:self.shareButton preferredEdge:NSMaxYEdge];
    else{nil;};

Sorry, I misread that completely. Replace that else clause with something like this:
NSAlert * alert = [[NSAlert alloc] init];
[alert setMessageText: NSLocalizedString(@"Image Required", NULL)];
[alert setAlertStyle: NSInformationalAlertStyle];
[alert setInformativeText: NSLocalizedString(@"You have to drop an image into the app", NULL)];
[alert runModal];

When I upgraded my OS to OS X 10.9 the computer doesn't connect the LAN automatically after sleep. Could you help me?

When I upgraded my OS to OS X 10.9 the computer doesn't connect the LAN automatically after sleep. Could you help me?

just an update on the situation....
the problem is solved. after trying everythng, at last i did a reset on my linksys e3200 router - and BANG!!!
airplay works.
hope this helps someone else.

I can't import orf files ! Could you help me ? thanks

Hi
I haven't any problem to import nef files on lightroom 5 , but I can't import orf files ! Could you help me ?

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Mylenium

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

I moved to new house where I have wifi base station I made extension via TP-link power line adapter and connect my Airport utility 6.3.2, but I don't now how to set up as a second network with one IP address?Could you help me please?

Urvergessen wrote:
+You may have already done this, but do you have the first AirPort Express configured to "Allow this network to be extended"?+
Could not find that setting anywhere.
It's in AirPort Utility, AirPort panel, Wireless tab.
When I'm within the range of the base station I connect normally, but further away the connection drops despite the fact that the other Airport is very close and light is green. Interestingly, my PB Pro has signal almost everywhere in the house, but my iPhone and Mac Mini don't. Most likely just a hardware difference?
In AirPort Utility with the second Express, in the AirPort panel, Wireless tab, have you checked "Allow wireless clients"?
The second AP does show an IP address: 10.0.1.3.
With a "Configure IPv4" setting of "Using DHCP", that suggests that the second Express really is connecting to the first Express. In that case I have no other explanation of your your problem.

Regarding replacement path.. Could you help me please .. ?

Dear all,
I have problem when i use variable replacement path, where it replace another variable.
The scenario is like this:
I have variable cal. month user input where the type is interval (let say it's called var A).
Then i create rep. path variable cal. month:
1. Replace with : Key
2. Use Interval : From Value.
I use this rep. path variable for restricted KF.
When i run the report:
I fill in the value for Var A:
01.2003 - 05.2003
The invalid things are:
1. Rep. Path variable only get the value 01.2003. The impact the KF is only restricted by 01.2003.
It supposed to be restricted by 01.2003, 02.2003, 03.2003, 04.2003.05.2003.
The questions are:
1. How can i overcome this problem?
2. How should i do, if i want to use replacement path in restricted KF that can restrict by 01.2003, 02..2003, 03.2003, 04.2003, 05.2003 ???
Could you help me to suggest what i should do please .. ?
Really need your guidances....
Regards,
Niel.

Hi Niel,
When you use a variable(v1) of processing type replacement path and try to replace it wih another variable the replacement is only by single value. This you can find by details tab in the variable(v1) being created.
Hence you have only options of replacing it wih from value/ to value/ difference.
I didn't undersand why you wish to use variable(v1) wih processing type replacement path when you could have used the input variable type for restriction of the characteristic in the restricted key figure.
I think for your requirement variable processing by manual input is more suitable unless you have some reason for replacement which I didn't undestand.
Thanks and regards,
Sunmit.

Could you help me about table control .. ?

Dear All,
I've a problem in table Control.
I put table control inside tab control (there are many tab in one screen where one tab has one table control).
The schenario of the program, i wanna use table control to maintain the value from some table.
So certainly it has insert/add, delete function.
As we know to do one function in those e.g. add record button, we need specify some code on that button.
So ..
Once when that button is pressed, we can check what button is being pressed using that code.
And it can run well.
But this is the strange one, if i have schenario like this :
1. I click add record button
    I will get the add code through ok_code/SY-UCOMM variable.
2. I scroll down/up the table control.
    (THIS IS THE WEIRD), the ok_code/SY-UCOMM variable still keep having add code. So every we scroll down/up, application also will add one record.
Could you help me to make ok_code/SY-UCOMM blank in every time i scroll down/up the table control ??
Or could you help me how to i specify the code for scroll down/up the table control so I can identify when user is scrolling down/up the table control??
I really need your guidance/suggestion how to overcome it .. ?
Many tks for all your attention.
Best regards,
Daniel N.

Following is a sample code of handling table control in BDC.
REPORT Y730_BDC5 .
*HANDLING TABLE CONTROL IN BDC
DATA : BEGIN OF IT_DUMMY OCCURS 0,
       DUMMY(100) TYPE C,
       END OF IT_DUMMY.
DATA : BEGIN OF IT_XK01 OCCURS 0,
       LIFNR(10) TYPE C,
       BUKRS(4) TYPE C,
       EKORG(4) TYPE C,
       KTOKK(4) TYPE C,
       NAME1(30) TYPE C,
       SORTL(10) TYPE C,
       LAND1(3) TYPE C,
       SPRAS(2) TYPE C,
       AKONT(6) TYPE C,
       FDGRV(2) TYPE C,
       WAERS(3) TYPE C,
       END OF IT_XK01,
       BEGIN OF IT_BANK OCCURS 0,
       BANKS(3) TYPE C,
       BANKL(10) TYPE C,
       BANKN(10) TYPE C,
       KOINH(30) TYPE C,
       LIFNR(10) TYPE C,
       END OF IT_BANK.
DATA : IT_BDCDATA LIKE BDCDATA OCCURS 0 WITH HEADER LINE,
       IT_BDCMSGCOLL LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
   FILENAME                      = 'C:\VENDOR.TXT'
   FILETYPE                      = 'ASC'
TABLES
   DATA_TAB                      = IT_DUMMY.
LOOP AT IT_DUMMY.
IF IT_DUMMY-DUMMY+0(2) = '11'.
    IT_XK01-LIFNR = IT_DUMMY-DUMMY+2(10).
    IT_XK01-BUKRS = IT_DUMMY-DUMMY+12(4).
    IT_XK01-EKORG = IT_DUMMY-DUMMY+16(4).
    IT_XK01-KTOKK = IT_DUMMY-DUMMY+20(4).
    IT_XK01-NAME1 = IT_DUMMY-DUMMY+24(30).
    IT_XK01-SORTL = IT_DUMMY-DUMMY+54(10).
    IT_XK01-LAND1 = IT_DUMMY-DUMMY+64(3).
    IT_XK01-SPRAS = IT_DUMMY-DUMMY+67(2).
    IT_XK01-AKONT = IT_DUMMY-DUMMY+69(6).
    IT_XK01-FDGRV = IT_DUMMY-DUMMY+75(2).
    IT_XK01-WAERS = IT_DUMMY-DUMMY+77(3).
    APPEND IT_XK01.
ELSE.
    IT_BANK-BANKS = IT_DUMMY-DUMMY+2(3).
    IT_BANK-BANKL = IT_DUMMY-DUMMY+5(10).
    IT_BANK-BANKN = IT_DUMMY-DUMMY+15(10).
    IT_BANK-KOINH = IT_DUMMY-DUMMY+25(30).
    IT_BANK-LIFNR = IT_DUMMY-DUMMY+55(10).
    APPEND IT_BANK.
ENDIF.
ENDLOOP.
LOOP AT IT_XK01.
REFRESH IT_BDCDATA.
perform bdc_dynpro      using 'SAPMF02K' '0100'.
perform bdc_field       using 'BDC_CURSOR'
                              'RF02K-REF_LIFNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'RF02K-LIFNR'
                              IT_XK01-LIFNR.
perform bdc_field       using 'RF02K-BUKRS'
                              IT_XK01-BUKRS.
perform bdc_field       using 'RF02K-EKORG'
                              IT_XK01-EKORG.
perform bdc_field       using 'RF02K-KTOKK'
                              IT_XK01-KTOKK.
perform bdc_dynpro      using 'SAPMF02K' '0110'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-TELX1'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFA1-NAME1'
                              IT_XK01-NAME1.
perform bdc_field       using 'LFA1-SORTL'
                              IT_XK01-SORTL.
perform bdc_field       using 'LFA1-LAND1'
                              IT_XK01-LAND1.
perform bdc_field       using 'LFA1-SPRAS'
                              IT_XK01-SPRAS.
perform bdc_dynpro      using 'SAPMF02K' '0120'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFA1-KUNNR'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0130'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFBK-KOINH(02)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
DATA : FNAM(20) TYPE C,
       IDX      TYPE C.
MOVE 1 TO IDX.
LOOP AT IT_BANK WHERE LIFNR = IT_XK01-LIFNR.
CONCATENATE 'LFBK-BANKS(' IDX ')' INTO FNAM.
perform bdc_field       using FNAM
                                IT_BANK-BANKS.
CONCATENATE 'LFBK-BANKL(' IDX ')' INTO FNAM.
perform bdc_field       using FNAM
                                IT_BANK-BANKL.
CONCATENATE 'LFBK-BANKN(' IDX ')' INTO FNAM.
perform bdc_field       using FNAM
                                IT_BANK-BANKN.
CONCATENATE 'LFBK-KOINH(' IDX ')' INTO FNAM.
perform bdc_field       using FNAM
                                IT_BANK-KOINH.
IDX = IDX + 1.
ENDLOOP.
perform bdc_dynpro      using 'SAPMF02K' '0130'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFBK-BANKS(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_dynpro      using 'SAPMF02K' '0210'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-FDGRV'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFB1-AKONT'
                              IT_XK01-AKONT.
perform bdc_field       using 'LFB1-FDGRV'
                              IT_XK01-FDGRV.
perform bdc_dynpro      using 'SAPMF02K' '0215'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB1-ZTERM'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0220'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFB5-MAHNA'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_dynpro      using 'SAPMF02K' '0310'.
perform bdc_field       using 'BDC_CURSOR'
                              'LFM1-WAERS'.
perform bdc_field       using 'BDC_OKCODE'
                              '/00'.
perform bdc_field       using 'LFM1-WAERS'
                              IT_XK01-WAERS.
perform bdc_dynpro      using 'SAPMF02K' '0320'.
perform bdc_field       using 'BDC_CURSOR'
                              'WYT3-PARVW(01)'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTR'.
perform bdc_dynpro      using 'SAPLSPO1' '0300'.
perform bdc_field       using 'BDC_OKCODE'
                              '=YES'.
CALL TRANSACTION 'XK01' USING IT_BDCDATA
                        MODE 'A'
                       UPDATE 'S'
                     MESSAGES INTO IT_BDCMSGCOLL.
ENDLOOP.
FORM BDC_DYNPRO USING PROG SCR.
CLEAR IT_BDCDATA.
IT_BDCDATA-PROGRAM = PROG.
IT_BDCDATA-DYNPRO = SCR.
IT_BDCDATA-DYNBEGIN = 'X'.
APPEND IT_BDCDATA.
ENDFORM.
FORM BDC_FIELD USING FNAM FVAL.
CLEAR IT_BDCDATA.
IT_BDCDATA-FNAM = FNAM.
IT_BDCDATA-FVAL = FVAL.
APPEND IT_BDCDATA.
ENDFORM.
points plz (if this information is usefull).
Regard's
Raghunath.S

License problem, Could you help me?

Similar Messages

Maybe you are looking for