Lightroom 6 english version isn't downloading; I don't want the multi language version, which is available
My serial number from version 5 shows up on download page so I can download Lightroom 6 at the upgrade price, but English vesion (where serial number is located) says "not applicable". I see I can download the multi language version, but I don't want that version.
How do I get the English version?
Hi There,
If you have purchased Lightroom 5 in the past, then you have to purchase LR 6 seprately to use it, here is the link: Products
In order to get the trial, here is the link: https://www.adobe.com/products/photoshop-lightroom.html
This comparision link might also help you make up your mind : Compare Lightroom versions | Adobe Photoshop Lightroom CC
Thanks,
Atul Saini
Similar Messages
-
I have Lightroom 4 installed. I cannot download my CR2 files from the Canon 5D Mark III camera. I have downloaded Lightroom 5 thinking it was an update but it appears I have to pay for the program. Any ideas how I can get lightroom 4 to accept my CR2 files ?
The Canon 5D Mk 111 was supported from LR 4.1, see the link below. Just update LR to the latest version. See link below
Camera Raw plug-in | Supported cameras
Adobe - Lightroom : For Windows
Adobe - Lightroom : For Macintosh -
I don't want the updates...If they take away the ease of using my computer! The latest version didn't recognize the FB shortcut. and I use my wireless printer now I don't think I can because it had no updates for the printer after firefox updated I want to be able to back out of the update if it isn't compatible!!!!
I am the original poster, and I got rid of CA Security Suite & and loaded the Avast! which has some great features even on the freeware. No more crashes or freezing & yes I think there is a problem with CA & Firefox, but am not sure what it is. CA was a big time hog. I also got rid of my ISP and installed a Intellinet Wireless G PCI Card & now am completely wireless on my PC. Faster by far than what I was paying $50/month for & I use my Windows Firewall.
-
Hello, I bought a song on iTunes that has a music video to it, but I don't want the song to play the music video. How can I make it so the music video isn't played?
Hello, iBillyxD.
Thank you for the question. The best way to avoid this behavior would be to delete the music video from your library. You can always download it again free by accessing your previous purchases. To delete and item in your iTunes library, select the item and hit delete on your keyboard.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/ht2519
Cheers,
Jason H. -
Oracle states go to OTN for this:If the criteria isn't met I don't want for
Can you easily recover from, bypass or work around the problem? = YES
Does your system or application continue normally after the problem occurs? =
YES
Are the standard features of the system or application still available; is the
loss of service minor? = YES
### Did it work before? If yes, what have you changed? ###
No, We were told this was fixed with 10G so we upgraded to 10G. We have a
report and we want it to execute if it's less than 10 records if not we want a
message to come up that the report needs to be scheduled.
Well we run the report and it displays exceeded record count but the format
still runs so no time saved on the web.
If the record count was exceeded we want to HALT the system and not go any
farther.
Now if we could modify the system message 1825 we would be o.k. But we don't
know if that is going to work. If we could change the message we would be
o.k. with that. that would mean changing the system codes though.
### How is the Report being called (Command line, URL or via Oracle Forms): ###
If false comes back in the beginning then we don't want any report formatting
to be done. Right now the format is done it seems but no data is displayed
because criteria isn't met.
So we dont wnat the formatting to be run when criteria isn't met. But for
some
reason it still runs and takes time.
See we have some reports on the web that can only be ran by date range right
now the clients can only run the reports for a 6 months range.. Well some
clients have a lot smaller record count. So we want to change the way the
reports are ran to a records count. If the count is large than said amount
then a message comes up that states the report has to be scheduled. If the
amount is under said amount then the report runs.
So at this time in the report we do a count then we move onto will the report
run or not if over the amount we want to abort the process but we don't want
the client to see the abort. We definately don't want the client to sit and
wait for the format to run when NO Data is to be returned.
### Error messages and error scenario: ###
So what we want is too see a message "Schedule the report count exceeded" and
NO formatting done. If under amount we want the report to run.
### Provide a detailed step-by-step description of your problem or question: ###
Or is there a way to customize the messages the client / users will see. And
no formatting time for no records returned.
Contact me via : E-mail -> [email protected]
Text continued in next action...
20-SEP-04 18:39:53 GMT
Text continued from previous action...
20-SEP-04 19:18:51 GMT
New info : Is there a way if the error messages have to come up that we can
hide the message or have another screen cover that error message something to
cover the message so that the user doesn't see the error message.
20-SEP-04 19:30:23 GMT
Hi Darlene,
Thank you for using MetaLink. Iam currently working on a very critical issue.I shall review/research your issue at the earliest opportunity and w
ill update the SR / call you as soon as we have relevant information. Thank you
for your patience.
Best Regards,
Seema,
Oracle Support Services
STATUS
=======
@WIP -- Work In Progress
20-SEP-04 19:30:30 GMT
Email Update button has been pressed: Sending email to [email protected]
21-SEP-04 00:32:18 GMT
Hi Darlene!
If you are calling the report from a form, try using the EXIT_FORM line in your code.
Thanks and Regards,
Seema
21-SEP-04 00:33:01 GMT
Email Update button has been pressed: Sending email to [email protected]
21-SEP-04 14:09:20 GMT
New info : We will try it and let you know.
21-SEP-04 14:19:04 GMT
New info : We are not calling the report from a form so this won't work. Any
other way. We are needing to do this badly.
21-SEP-04 14:39:06 GMT
New info : Can I get detailed steps about how to customize the system message
or hide the message when we abort the report?
21-SEP-04 15:38:39 GMT
Hi Darlene!!
As talked to you on phone, here are the steps for you to try.
The below has been run as a test case using emp table in scott schema of a database
1) create a summary coloumn say cs_1 in the data model.
2) point the function to count.
3) Point the source to what ever's count you want it to be pointed to(say empno of emp table of
scott schema)
4) create a user parameter say NO_ROWS
5) in its property palette make its data type number and initial value as 1
6) I had teh following query for my report:
select empno, ename from emp
where rownum <= :no_rows
This means that the report that will be generated will consist of a total no of NO_ROWS(that we
shall be specifying at run time). The before report trigger(mentioned in 7 below) shall assure
that whenever we specify NO_ROWS greater than 5 then the report will display a customized pop up
message.
7) create a before report trigger as:
function BeforeReport return boolean is
user_excp EXCEPTION;
begin
if :cs_1 >5 then
raise user_excp;
return (false);
else
return true;
end if;
EXCEPTION
WHEN user_excp then
SRW.MESSAGE(30, 'Data is more please schedule this report:');
raise SRW.PROGRAM_ABORT;
return (false);
end;
This way when u run a report, an argument is asked whether how many rows do you want to be
displayed as in the parameter NO_ROWS. then you specify the number. If that number is greater
than 5(in this case, due to if :cs_1 > 5 then....) then it will pop up a message saying "Data is
more please schedule this report:"
In case you do not want to specify NO_ROWS..then you need not put that and modify the report
query as "select empno, empname from emp;" i.e. without where clause.
21-SEP-04 16:49:30 GMT
New info : we will try this then update the TAR.
21-SEP-04 16:58:09 GMT
ok you update the tar when you try the above steps.
STATUS:
@CUS
23-SEP-04 02:16:00 GMT
New info : Information from the person that did this suggestion step by step.
I tried this step by step, but unfortunately, it doesn't work the way we want.
First with this suggestion, the user needs to choose how many records they
want
to get, or we default a number of records, in order to run the report. The most
important thing is, whenever you specify the statement return false or raise
SRW.PROGRAM_ABORT in the before report trigger, the system message will pop up.
I really hope that people from Oracle would let us know how to customize the
system message or hide it.
23-SEP-04 14:23:04 GMT
New info : I just thought that we have some sort of message, which I guess is
from the database, when we do claim search on client inquiry. I am just
wondering if we could try the same thing to the report.
The some sort of message looks like this on dev box:
Your search exceeded 5000 records and will surpass the capabilities of this
connection. Please narrow the search criteria and resubmit.
It's just a thought, not sure if it's going to work.
When could we have the DBA Make this change. The servlet.properties???
23-SEP-04 17:30:55 GMT
REQUESTED INFORMATION PROVIDED
===============================
Hi Darlene,
Thank you for providing the requested information. I am currently reviewing/resea
rching the situation and will update the TAR / call you as soon as I have additi
onal information. Thank you for your patience.
Best regards,
Ajit
STATUS
=======
@WIP -- Work In Progress
23-SEP-04 18:04:31 GMT
UPDATE
=======
Hi Darlene,
We cannot modify the system messages nor do I think there is a method to hide the system message. The message that was coming is
due to the raise srw.program_abort command, which is the element through which
we can abort the program.
Thanks
Best Regards
Ajit
@CUS
23-SEP-04 18:29:26 GMT
New info : Can you please look into a way that we can get something to work?
23-SEP-04 18:49:28 GMT
Hi Darlene,
I am sorry to say that but I don't think there is any any workaround to this because the system message is what is generated by the oracle reports i
nternally. Still if you wish you may refer to the otn discussion forum which is
maintained by teh product management group and post a new thread on it. the link
to the forum is Reports
Also since nothing can be done on our side I don't see any reason to keep this TAR open an
d if you wish we can soft close this.
Thanks
Regards
Ajit.
23-SEP-04 13:13:10 : CHANGES MADE VIA MetaLink
NOT YET FORWARDED TO OUR INTERNAL SYSTEMS :
New info : Shouldn't there always be a way to do something? I don't understand
why we were told in 10G that this could be done and now we are told it can't.You can tell Thunderbird to remember your password.
''... they took me off their list because they kept receiving error messages when they sent me a message.''
What is the exact error message? -
I am running OSX 10.6.8 Snow lepard I am trying to install windows on my intel imac 20in late 2006 via bootcamp, and it says I need to download Windows Support Software. I tried, but it says "Download can not continue. The Windows Support Software is not available. I bought the Imac secend hand and did not get the install dvd's with it What can I do?
You don't need to download the Windows support software, because in Snow Leopard, they are only available as a download for the Late 2010 MacBook Air.
Instead, you have to buy Mac OS X Snow Leopard. The Snow Leopard disc contains the Windows drivers for your Mac, so you have to install them after finishing the Windows installation -
I have two iPads and giving 1st gen. to my grandson. Using my Apple idI for both... can we use different passwords to access our "own" apps. Also I don't want the downloaded App to go to both iPads. Been looking for hours for an explanation! Thanks for any help.
Look at this link.
Giving your former iPad to a spouse or family member: the quick guide
http://www.tuaw.com/2012/03/17/giving-your-former-ipad-to-a-spouse-or-family-mem ber-the-quick/
How to Share a Family iPad
http://www.macworld.com/article/1163347/how_to_share_a_family_ipad.html
Using iPhone, iPad, or iPod with multiple computers
http://support.apple.com/kb/ht1202
iOS & iCloud Tips: Sharing an Apple ID With Your Family
http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/
How To Best Use and Share Apple IDs across iPhones, iPads and iPods
http://www.nerdsonsite.com/blog/2012/06/07/help-im-appleid-confused/
Cheers, Tom -
I downloaded an app off the store which said it was free and part of the 5 year promotion.
I've been charged for the app by the store. I don't want the app and there's no one to speak to about it.
Who can I call?
How can I get the app off my phone?
How do I get my money back from something I wouldn't have ordered?You cannot call anyone. You contact them as everyone else does: http://www.apple.com/support/itunes/contact/
You delete the app as you do any other app. Hold an icon until they wiggle. Tap the "x". This is covered in the manual. -
I keep getting a screen that says "Unable to Download" [song] with two choices - "done" or "try again". I have tried both and can't get rid of the screen ( and don't want the song which I never ordered to begin with. Ideas on getting rid of the screen??
Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever. -
How can I know about the latest updates / versions which when available for all the CC products, without having to install and check it with the Desktoip Creative Cloud Application ?
Thanks for looking into this Jeff!
I work with an Inventory module software and is responsible for software detection across several computers. Once an updated version comes up, I update our database with latest software details to get it detected if installed on any machines.
The problem tracking updates with Desktop Creative Cloud Software are;
1)We have to have it installed with the CC applications in-order to get the notification of the latest updates and have to check everyday.
2)Only relates to the latest updates, so in-between we may miss a prior update unknowingly.Hence, the remote machines having those updates may not get detected with the software version update which would create problem in reporting.
3)For all CC products, there is no base or previous updates available for installation if we miss one.
I went through the Adobe Products Update pages [Product updates] which holds good when it comes to Acrobat and Reader software which I follow to track down any newer updates but this is inconsistent when it comes to CC products like in After Effects CC, Dreamweaver CC etc...
So overall to be very specific, is there any one channel I can follow to get the notifications only for the updates on CC products and then may be I can rely on Desktop Creative Cloud for installation if not available anywhere like in product update pages of Adobe ?
Regards,
Subrat -
Which older version can I get of AI for Windows 7. I don't want the Cloud version.
I am running Windows 7 and want a newer version of AI than the one I have (CS version), but I don't want the Cloud version. Can I still get a newer version just not as new as the Cloud version?
Yes, CS6 is still available as a perpetual license
http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html -
How can I find itunes 10.1 for windows. I don't want the cloud in newer version.
How can I find iTunes 10.1 for windows. I don't want the cloud, and my iPod touch won't go back to prior versions.
Had the same problem. Also worked fine on my MacBook, but not on my new iMac. Here's what I did to fix it:
Archive and Reinstall Mac OS (takes about 40 minutes). This reverted my system back to 10.6.2. Just pop in your Mac OS disc that came with your computer. Mine had 10.6.2 on it, and "Archive and Install" is the default option. When it's done, run software update and update everything. Now it all works fine.
Somewhere along the way, some file got corrupted somehow. But doing an "archive and install" of your OS undoes whatever file damage was incurred, and allows everything to update normally via Software Update as it should. -
I rent a film but after the download I don't see the rental voice on itunes, how can I see the film ? Thanks in advance
On your ipad?
It belongs in the videos app. Did you look there? -
I have bought Elements 24 sept and I can´t download it. I want the program sent to me - [personal information removed]
Hi ulf stecksen,
Please find the below document which should be helpful to locate the download link from your Adobe account:
Find a download link on Adobe.com
If you still face issue in locating the Download link from your Account then you can download your Photshop Elements/Premiere Elements from the below links:
http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
Download Premiere Elements products | 12, 11, 10
Then use the serial number to activate your product
Thank you.
Santhosh. -
How to upgrade to the last iOS 6 version (6.1.6?). I don't want the hideous iOS 7!
How to upgrade to the last iOS6 version (6.1.6?)? I don't want the hideous iOS7!
The iOS 6.1.6 upgrade is only for those devices that cannot be upgraded to iOS 7.0.6...that includes things like the iPod Touch 4th generation. If the device can be upgraded to iOS 7.0.6 then there is no option but to go there.
Apple has never supported upgrading to intermediate iOS versions, and infact, takes them off the servers when a new version is released.
The SSL flaw in the lower iOS versions should not be an issue if you use good practices such as caution on unsecure purblic wireless...it does not mean your device can be hacked or entered. Only that wireless communications may be subject to eavesdropping.
Maybe you are looking for
-
Asa 5505 site to site VPN between A to B site, then B site MPLS to internal network
Dear all I am setting up site to site VPN between two site A to B site. Two local site of A and B are connected fine. however for my site B have another internal MPLS to other site. The connection fine from LAN A all the way to LAN B MPLS router,
-
I have system preferences > general > homepage and search engine set as google but my computer keeps using BING! Please help!
-
JSC2.1 Fedora5 and Chinese, jsp design view blank!!!
Dear all, I can run JSC2.1 in Fedora 5 chinese language, but jsp design view is blank, I can not drop any componnent in it and cannot see anything., and if I change JSC2.1 to "-locale en", JSC2.1 is all Okay, please help me
-
Who can tell me what's mean the parameter "-g" of buildserver.
buildserver -f "-g" -o ... i looked for the the manual for buildserver but i can't found it.
-
Hi All, I am triggering IDoc WMTORD during creation of transfer order (FM use for creating TO is L_TO_CREATE_MULTIPLE). Settings in OMKY are done for WMTORD for adding FM "L_IDOC_CREATE_WMTOID01" to that particular warehouse. In the user-exit of WMTO