Lighttpd and apache public_html problem (403)

I've installed lighttpd and enabled mod_userdir, and already added these lines:
userdir.path = "public_html"
userdir.exclude-user = ( "root" )
I've set chmod 711 to the /home/ras0ir and /home/ras0ir/public_html
drwxr-xr-x 3 root root 4,0K Eyl 22 02:04 ./
drwxr-xr-x 21 root root 4,0K Eyl 15 01:18 ../
drwx--x--x 146 ras0ir users 12K Eyl 22 02:14 ras0ir/
However, using both lighttpd and apache, i cant access to http://localhost/~ras0ir/ (I'm getting 403 - Forbidden)
Any ideas about the situation?
http://rafb.net/p/kANYfs25.html -> my lighttpd.conf
Last edited by ras0ir (2008-09-21 23:20:57)

Do you have index file in public_html directory? I don't know lighttpd well, but Apache will show you error 403, when there is no index and directory listing is not allowed (Options Indexes).
Last edited by briest (2008-09-22 17:12:51)

Similar Messages

  • Problem with SSL weblogic plug in and Apache

    We're using mod_wl_22.so with Apache, and after some problems with the mod failing on startup it is now working. We can access the weblogic SSL page fine directly on port 16101 with no warning, when we try via the proxy we get a failure of server Apache bride --------------------------------------------------------------------------------
    No backend server available for connection: timed out after 10 seconds or idempotent set to OFF. And in the wl_proxy.log there is a message that I think relates to the trustedcertfile in our http.conf file. We have a root certificate in pem format as the trustedcertfile.
    ================New Request: [GET /irm_desktop HTTP/1.1] =================
    Thu Jan 27 21:52:15 2011 <258812961651354> INFO: SSL is configured
    Thu Jan 27 21:52:15 2011 <258812961651354> INFO: SSL configured successfully
    Thu Jan 27 21:52:15 2011 <258812961651354> Using Uri /irm_desktop
    Thu Jan 27 21:52:15 2011 <258812961651354> After trimming path: '/irm_desktop'
    Thu Jan 27 21:52:15 2011 <258812961651354> The final request string is '/irm_desktop'
    Thu Jan 27 21:52:15 2011 <258812961651354> SEARCHING id=[sealedinfo-prod:16101] from current ID=[sealedinfo-prod:16101]
    Thu Jan 27 21:52:15 2011 <258812961651354> The two ids matched
    Thu Jan 27 21:52:15 2011 <258812961651354> @@@FOUND...id=[sealedinfo-prod:16101], server_name=[uat.sealedinfo.com], server_port=[443]
    Thu Jan 27 21:52:15 2011 <258812961651354> attempt #0 out of a max of 5
    Thu Jan 27 21:52:15 2011 <258812961651354> Trying a pooled connection for '10.10.10.10/16101/16101'
    Thu Jan 27 21:52:15 2011 <258812961651354> getPooledConn: No more connections in the pool for Host[10.10.10.10] Port[16101] SecurePort[16101]
    Thu Jan 27 21:52:15 2011 <258812961651354> general list: trying connect to '10.10.10.10'/16101/16101 at line 2658 for '/irm_desktop'
    Thu Jan 27 21:52:15 2011 <258812961651354> New SSL URL: match = 0 oid = 22
    Thu Jan 27 21:52:15 2011 <258812961651354> Connect returns -1, and error no set to 10035, msg 'Unknown error'
    Thu Jan 27 21:52:15 2011 <258812961651354> EINPROGRESS in connect() - selecting
    Thu Jan 27 21:52:15 2011 <258812961651354> Setting peerID for new SSL connection
    Thu Jan 27 21:52:15 2011 <258812961651354> 0a0a 0a0a e53e 0000 .....>..
    Thu Jan 27 21:52:15 2011 <258812961651354> Local Port of the socket is 63867
    Thu Jan 27 21:52:15 2011 <258812961651354> Remote Host 10.10.10.10 Remote Port 16101
    Thu Jan 27 21:52:15 2011 <258812961651354> general list: created a new connection to '10.10.10.10'/16101 for '/irm_desktop', Local port:63867
    Thu Jan 27 21:52:15 2011 <258812961648171> WARN: GetSessionCallback: No session match found
    Thu Jan 27 21:52:16 2011 <258812961651354> INFO: SSL certificate chain validation failed: 3015
    Thu Jan 27 21:52:16 2011 <258812961651354> trusted certs = 0
    Thu Jan 27 21:52:16 2011 <258812961651354> dumping cert chain
    Thu Jan 27 21:52:16 2011 <258812961651354> commonName is uat.sealedinfo.com
    Thu Jan 27 21:52:16 2011 <258812961648171> WARN: DeleteSessionCallback: No match found!!
    Thu Jan 27 21:52:16 2011 <258812961651354> ERROR: SSLWrite failed
    Thu Jan 27 21:52:16 2011 <258812961651354> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
    Thu Jan 27 21:52:16 2011 <258812961651354> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
    Thu Jan 27 21:52:16 2011 <258812961651354> Marking 10.10.10.10:16101 as bad
    Thu Jan 27 21:52:16 2011 <258812961651354> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0,  line 794 of ../nsapi/URL.cpp]: at line 3094
    Thu Jan 27 21:52:16 2011 <258812961651354> INFO: Closing SSL context
    Thu Jan 27 21:52:16 2011 <258812961651354> INFO: Error after SSLClose, socket may already have been closed by peer
    Thu Jan 27 21:52:16 2011 <258812961651354> Failing over after WRITE_ERROR_TO_SERVER exception in sendRequest()
    Thu Jan 27 21:52:16 2011 <258812961651354> attempt #1 out of a max of 5
    Thu Jan 27 21:52:16 2011 <258812961651354> general list: trying connect to '10.10.10.10'/16101/16101 at line 2658 for '/irm_desktop'
    Thu Jan 27 21:52:16 2011 <258812961651354> New SSL URL: match = 0 oid = 22
    Thu Jan 27 21:52:16 2011 <258812961651354> Connect returns -1, and error no set to 10035, msg 'Unknown error'
    Thu Jan 27 21:52:16 2011 <258812961651354> EINPROGRESS in connect() - selecting
    Thu Jan 27 21:52:16 2011 <258812961651354> Setting peerID for new SSL connection
    Thu Jan 27 21:52:16 2011 <258812961651354> 0a0a 0a0a e53e 0000 .....>..
    Thu Jan 27 21:52:16 2011 <258812961651354> Local Port of the socket is 63868
    Thu Jan 27 21:52:16 2011 <258812961651354> Remote Host 10.10.10.10 Remote Port 16101
    Thu Jan 27 21:52:16 2011 <258812961651354> general list: created a new connection to '10.10.10.10'/16101 for '/irm_desktop', Local port:63868
    Thu Jan 27 21:52:16 2011 <258812961648171> WARN: GetSessionCallback: No session match found
    Thu Jan 27 21:52:16 2011 <258812961651354> INFO: SSL certificate chain validation failed: 3015
    Thu Jan 27 21:52:16 2011 <258812961651354> trusted certs = 0
    Thu Jan 27 21:52:16 2011 <258812961651354> dumping cert chain
    Thu Jan 27 21:52:16 2011 <258812961651354> commonName is uat.sealedinfo.com
    Thu Jan 27 21:52:16 2011 <258812961648171> WARN: DeleteSessionCallback: No match found!!
    Thu Jan 27 21:52:16 2011 <258812961651354> ERROR: SSLWrite failed
    Thu Jan 27 21:52:16 2011 <258812961651354> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
    Thu Jan 27 21:52:16 2011 <258812961651354> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
    Thu Jan 27 21:52:16 2011 <258812961651354> Marking 10.10.10.10:16101 as bad
    Thu Jan 27 21:52:16 2011 <258812961651354> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0,  line 794 of ../nsapi/URL.cpp]: at line 3094
    Thu Jan 27 21:52:16 2011 <258812961651354> INFO: Closing SSL context
    Thu Jan 27 21:52:16 2011 <258812961651354> INFO: Error after SSLClose, socket may already have been closed by peer
    Thu Jan 27 21:52:16 2011 <258812961651354> Failing over after WRITE_ERROR_TO_SERVER exception in sendRequest()
    Thu Jan 27 21:52:16 2011 <258812961651354> attempt #2 out of a max of 5
    Thu Jan 27 21:52:16 2011 <258812961651354> general list: trying connect to '10.10.10.10'/16101/16101 at line 2658 for '/irm_desktop'
    Thu Jan 27 21:52:16 2011 <258812961651354> New SSL URL: match = 0 oid = 22
    Thu Jan 27 21:52:16 2011 <258812961651354> Connect returns -1, and error no set to 10035, msg 'Unknown error'
    Thu Jan 27 21:52:16 2011 <258812961651354> EINPROGRESS in connect() - selecting
    Thu Jan 27 21:52:16 2011 <258812961651354> Setting peerID for new SSL connection
    Thu Jan 27 21:52:16 2011 <258812961651354> 0a0a 0a0a e53e 0000 .....>..
    Thu Jan 27 21:52:16 2011 <258812961651354> Local Port of the socket is 63869
    Thu Jan 27 21:52:16 2011 <258812961651354> Remote Host 10.10.10.10 Remote Port 16101
    Thu Jan 27 21:52:16 2011 <258812961651354> general list: created a new connection to '10.10.10.10'/16101 for '/irm_desktop', Local port:63869
    Thu Jan 27 21:52:16 2011 <258812961648171> WARN: GetSessionCallback: No session match found
    Thu Jan 27 21:52:16 2011 <258812961651354> INFO: SSL certificate chain validation failed: 3015
    Thu Jan 27 21:52:16 2011 <258812961651354> trusted certs = 0
    Thu Jan 27 21:52:16 2011 <258812961651354> dumping cert chain
    Thu Jan 27 21:52:16 2011 <258812961651354> commonName is uat.sealedinfo.com
    Thu Jan 27 21:52:16 2011 <258812961648171> WARN: DeleteSessionCallback: No match found!!
    Thu Jan 27 21:52:16 2011 <258812961651354> ERROR: SSLWrite failed
    Thu Jan 27 21:52:16 2011 <258812961651354> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
    Thu Jan 27 21:52:16 2011 <258812961651354> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
    Thu Jan 27 21:52:16 2011 <258812961651354> Marking 10.10.10.10:16101 as bad
    Thu Jan 27 21:52:16 2011 <258812961651354> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0,  line 794 of ../nsapi/URL.cpp]: at line 3094
    Thu Jan 27 21:52:16 2011 <258812961651354> INFO: Closing SSL context
    Thu Jan 27 21:52:16 2011 <258812961651354> INFO: Error after SSLClose, socket may already have been closed by peer
    Thu Jan 27 21:52:16 2011 <258812961651354> Failing over after WRITE_ERROR_TO_SERVER exception in sendRequest()
    Thu Jan 27 21:52:16 2011 <258812961651354> attempt #3 out of a max of 5
    Thu Jan 27 21:52:16 2011 <258812961651354> general list: trying connect to '10.10.10.10'/16101/16101 at line 2658 for '/irm_desktop'
    Thu Jan 27 21:52:16 2011 <258812961651354> New SSL URL: match = 0 oid = 22
    Thu Jan 27 21:52:16 2011 <258812961651354> Connect returns -1, and error no set to 10035, msg 'Unknown error'
    Thu Jan 27 21:52:16 2011 <258812961651354> EINPROGRESS in connect() - selecting
    Thu Jan 27 21:52:16 2011 <258812961651354> Setting peerID for new SSL connection
    Thu Jan 27 21:52:16 2011 <258812961651354> 0a0a 0a0a e53e 0000 .....>..
    Thu Jan 27 21:52:16 2011 <258812961651354> Local Port of the socket is 63870
    Thu Jan 27 21:52:16 2011 <258812961651354> Remote Host 10.10.10.10 Remote Port 16101
    Thu Jan 27 21:52:16 2011 <258812961651354> general list: created a new connection to '10.10.10.10'/16101 for '/irm_desktop', Local port:63870
    Thu Jan 27 21:52:16 2011 <258812961648171> WARN: GetSessionCallback: No session match found
    Thu Jan 27 21:52:16 2011 <258812961651354> INFO: SSL certificate chain validation failed: 3015
    Thu Jan 27 21:52:16 2011 <258812961651354> trusted certs = 0
    Thu Jan 27 21:52:16 2011 <258812961651354> dumping cert chain
    Thu Jan 27 21:52:16 2011 <258812961651354> commonName is uat.sealedinfo.com
    Thu Jan 27 21:52:16 2011 <258812961648171> WARN: DeleteSessionCallback: No match found!!
    Thu Jan 27 21:52:16 2011 <258812961651354> ERROR: SSLWrite failed
    Thu Jan 27 21:52:16 2011 <258812961651354> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
    Thu Jan 27 21:52:16 2011 <258812961651354> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
    Thu Jan 27 21:52:16 2011 <258812961651354> Marking 10.10.10.10:16101 as bad
    Thu Jan 27 21:52:16 2011 <258812961651354> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0,  line 794 of ../nsapi/URL.cpp]: at line 3094
    Thu Jan 27 21:52:16 2011 <258812961651354> INFO: Closing SSL context
    Thu Jan 27 21:52:16 2011 <258812961651354> INFO: Error after SSLClose, socket may already have been closed by peer
    Thu Jan 27 21:52:16 2011 <258812961651354> Failing over after WRITE_ERROR_TO_SERVER exception in sendRequest()
    Thu Jan 27 21:52:16 2011 <258812961651354> attempt #4 out of a max of 5
    Thu Jan 27 21:52:16 2011 <258812961651354> general list: trying connect to '10.10.10.10'/16101/16101 at line 2658 for '/irm_desktop'
    Thu Jan 27 21:52:16 2011 <258812961651354> New SSL URL: match = 0 oid = 22
    Thu Jan 27 21:52:16 2011 <258812961651354> Connect returns -1, and error no set to 10035, msg 'Unknown error'
    Thu Jan 27 21:52:16 2011 <258812961651354> EINPROGRESS in connect() - selecting
    Thu Jan 27 21:52:16 2011 <258812961651354> Setting peerID for new SSL connection
    Thu Jan 27 21:52:16 2011 <258812961651354> 0a0a 0a0a e53e 0000 .....>..
    Thu Jan 27 21:52:16 2011 <258812961651354> Local Port of the socket is 63871
    Thu Jan 27 21:52:16 2011 <258812961651354> Remote Host 10.10.10.10 Remote Port 16101
    Thu Jan 27 21:52:16 2011 <258812961651354> general list: created a new connection to '10.10.10.10'/16101 for '/irm_desktop', Local port:63871
    Thu Jan 27 21:52:16 2011 <258812961648171> WARN: GetSessionCallback: No session match found
    Thu Jan 27 21:52:16 2011 <258812961651354> INFO: SSL certificate chain validation failed: 3015
    Thu Jan 27 21:52:16 2011 <258812961651354> trusted certs = 0
    Thu Jan 27 21:52:16 2011 <258812961651354> dumping cert chain
    Thu Jan 27 21:52:16 2011 <258812961651354> commonName is uat.sealedinfo.com
    Thu Jan 27 21:52:16 2011 <258812961648171> WARN: DeleteSessionCallback: No match found!!
    Thu Jan 27 21:52:16 2011 <258812961651354> ERROR: SSLWrite failed
    Thu Jan 27 21:52:16 2011 <258812961651354> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
    Thu Jan 27 21:52:16 2011 <258812961651354> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
    Thu Jan 27 21:52:16 2011 <258812961651354> Marking 10.10.10.10:16101 as bad
    Thu Jan 27 21:52:16 2011 <258812961651354> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0,  line 794 of ../nsapi/URL.cpp]: at line 3094
    Thu Jan 27 21:52:16 2011 <258812961651354> INFO: Closing SSL context
    Thu Jan 27 21:52:16 2011 <258812961651354> INFO: Error after SSLClose, socket may already have been closed by peer
    Thu Jan 27 21:52:16 2011 <258812961651354> Failing over after WRITE_ERROR_TO_SERVER exception in sendRequest()
    Thu Jan 27 21:52:16 2011 <258812961651354> attempt #5 out of a max of 5
    Thu Jan 27 21:52:16 2011 <258812961651354> general list: trying connect to '10.10.10.10'/16101/16101 at line 2658 for '/irm_desktop'
    Thu Jan 27 21:52:16 2011 <258812961651354> New SSL URL: match = 0 oid = 22
    Thu Jan 27 21:52:16 2011 <258812961651354> Connect returns -1, and error no set to 10035, msg 'Unknown error'
    Thu Jan 27 21:52:16 2011 <258812961651354> EINPROGRESS in connect() - selecting
    Thu Jan 27 21:52:16 2011 <258812961651354> Setting peerID for new SSL connection
    Thu Jan 27 21:52:16 2011 <258812961651354> 0a0a 0a0a e53e 0000 .....>..
    Thu Jan 27 21:52:16 2011 <258812961651354> Local Port of the socket is 63872
    Thu Jan 27 21:52:16 2011 <258812961651354> Remote Host 10.10.10.10 Remote Port 16101
    Thu Jan 27 21:52:16 2011 <258812961651354> general list: created a new connection to '10.10.10.10'/16101 for '/irm_desktop', Local port:63872
    Thu Jan 27 21:52:16 2011 <258812961648171> WARN: GetSessionCallback: No session match found
    Thu Jan 27 21:52:16 2011 <258812961651354> INFO: SSL certificate chain validation failed: 3015
    Thu Jan 27 21:52:16 2011 <258812961651354> trusted certs = 0
    Thu Jan 27 21:52:16 2011 <258812961651354> dumping cert chain
    Thu Jan 27 21:52:16 2011 <258812961651354> commonName is uat.sealedinfo.com
    Thu Jan 27 21:52:16 2011 <258812961648171> WARN: DeleteSessionCallback: No match found!!
    Thu Jan 27 21:52:16 2011 <258812961651354> ERROR: SSLWrite failed
    Thu Jan 27 21:52:16 2011 <258812961651354> SEND failed (ret=-1) at 793 of file ../nsapi/URL.cpp
    Thu Jan 27 21:52:16 2011 <258812961651354> *******Exception type [WRITE_ERROR_TO_SERVER] raised at line 794 of ../nsapi/URL.cpp
    Thu Jan 27 21:52:16 2011 <258812961651354> Marking 10.10.10.10:16101 as bad
    Thu Jan 27 21:52:16 2011 <258812961651354> got exception in sendRequest phase: WRITE_ERROR_TO_SERVER [os error=0,  line 794 of ../nsapi/URL.cpp]: at line 3094
    Thu Jan 27 21:52:16 2011 <258812961651354> INFO: Closing SSL context
    Thu Jan 27 21:52:16 2011 <258812961651354> INFO: Error after SSLClose, socket may already have been closed by peer
    Thu Jan 27 21:52:16 2011 <258812961651354> Failing over after WRITE_ERROR_TO_SERVER exception in sendRequest()
    Thu Jan 27 21:52:16 2011 <258812961651354> request [irm_desktop] did NOT process successfully..................

    I see that it is six months ago that I first posted this. Nothing has changed. When I use affixa to create a message with an attachment from my gmail account in firefox, the message is created in drafts, but the gmail window is closed and I have to re-open it. Not critical, but annoying.
    Now there is a plug-in on the affixa site that is supposed to be designed for Firefox, and which affixa support claims should take care of this. And I've downloaded it twice. When you download it and open it, it says that it will be installed when Firefox restarts, and gives you a button to restart Firefox. But after you click that button and firefox disappears and re-appears, the affixa plug-in is NOT in the plugin list.
    Please, somebody, HELP.

  • Problems when using shared instances of struts and apache-commons?

    I found this worrisome statement on this page (http://struts.apache.org/1.3.8/userGuide/configuration.html) regarding sharing jar files across multiple applications:
    <i>When a class is loaded from a shared class loader, static variables used within that class become global as well. This can cause inter-webapp conflicts when the underlying code assumes that the statics are global only within a particular web applicaiton (which would be true if the class was loaded from the webapp class loader). There are many cases where the framework, and the Commons libraries it relies on, use static variables to maintain information that is presumed to be visible only within a single web application. <b>Sharing these JAR files can cause unwanted interactions, and probably cause incorrect behavior</b>.</i>
    For those of you currently using Struts and Apache Commons (and perhaps other open source libraries) have you run into any issues when sharing the jars amongst multiple applications?
    I would like to avoid having multiple applications loading their own copies of these libraries, for obvious reasons.  However, if there are issues with doing so, I may have to relax that position.

    To answer my own questions, while we didn't run into any issues with sharing Struts, it may be a good idea to incorporate the libraries directly into the web app if suspicious behaviour is observed by the application.
    Also, the taglib definitions could not be loaded from the referenced jar files - these had to be placed into the WEB-INF directory, which introduces a synchronization problem - you could conceivably have different versions of the tld's and the base libraries.

  • After i installed ios 7 in my iPhone 4s and I got problem to login into my icloud account. There is a message appear and said  "the operation couldn't be completed (com.apple.appleaccount error 403)" can you help me ? how can i fix this problem ? iPhone 4

    After i installed ios 7 in my iPhone 4s and I got problem to login into my icloud account.
    There is a message appear and said  "the operation couldn't be completed (com.apple.appleaccount error 403)"
    can you help me ? how can i fix this problem ?
    iPhone 4, iOS 7
    iPhone 4S, iOS 7, (com.apple.appleaccount error 403)"

    Error: com.apple.appleaccount error 403
    Recreate Error: On a Iphone/Ipad device that has "already" created the maximum of 3 per device Apple limit of ICloud account creation attempt to create or login to ICloud service tab in Settings. You will be presented with "com.apple.appleaccount error 403" which does not tell the laymen anything useful.
    Cause: IOS 7 reports a "best guess" error instead of detailed error explanation.
    How To Resolve Error: Find a device that has not been used to create an ICloud account the maximum 3 times and use it to create the ICloud account by logging into the Settings/ICloud tab with the Apple ID you want a ICloud account created for.
    Keep in mind this will use up one of the three lifetime allowed ICloud account creations allowed by Apple on that device.
    Also per support: If an existing account is logged into the ICloud service. A. Backup phone using iTunes on a mac/pc. B. At bottome of Settings/ICloud Delete the account "AND" all the user date from the phone. It will offer the Delete all data option. The reason for Deletion(and is why we backed up on a pc vs. the cloud) is when you create the new ICloud account it will backup all of the Device owners information to the wrong persons account.
    Once you have created the new ICloud account log into that account on device that was presenting error: "com.apple.appleaccount error 403" it should allow the ICloud login.
    Once you have verified the "device with error" is ICloud functional delete the ICloud account from the device used to seed the ICloud account and delete again all user data from cloud. Restore the recently created mac/pc Itunes locally created backup to the phone and then go to Settings/ICloud and login with the device owners Apple ID and password and verify your backup to the ICloud settings and Eureka! your done.
    It took less time to do that for me to type this lol.

  • Problem in configuring tomcat and apache

    I am using mod_jk to configure tomcat and apache. In the server.xml file in /TOMCAT_HOME/conf, I have added this line:
    <Listener className="org.apache.jk.config.ApacheConfig" modJk="/TOMCAT_HOME/mod_jk/mod_jk.so" />
    And when I restart the tomcat, I get this error:
    Caused by: java.lang.RuntimeException: Unable to create path to config file :
    /usr/local/tomcat/apache-tomcat-5.5.15/conf/auto/mod_jk.conf
    What this error is and how it will be removed. Any suggestion?
    Joseph

    Seems like a filesystem user rights problem. Perhaps tomcat is running as a seperate user and this user has no rights to write to one of the subdirectories?

  • Compile problem using TOMCAT 5.0 and Apache ANT

    I got some sample from book.
    i just follow the step, place it the class file. it work. it run. show all the detail.
    but when i wan to compile it from java file, error came out
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: Error allocating a servlet instance
         org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
         org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
         org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
         org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
         org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         java.lang.Thread.run(Unknown Source)
    root cause
    java.lang.NoClassDefFoundError: com/jspbook/HelloWorld (wrong name: HelloWorld)
         java.lang.ClassLoader.defineClass1(Native Method)
         java.lang.ClassLoader.defineClass(Unknown Source)
         java.security.SecureClassLoader.defineClass(Unknown Source)
         org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:1634)
         org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:860)
         org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1307)
         org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1189)
         org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:118)
         org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
         org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
         org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
         org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         java.lang.Thread.run(Unknown Source)
    note The full stack trace of the root cause is available in the Apache Tomcat/5.0.28 logs.in CMD:
    set java_home = C:\Program Files\Java\jdk1.5.0_08
    set classpath = C:\Program Files\Apache Software Foundation\Tomcat 5.0\common\lib
    and Apache tomcat originally dont have servlet.jar but servlet-api.jar, i copy the servlet.jar from my friend
    i compile it using Apache ANT
    here the build.xml
    <?xml version="1.0" ?>
    <project name="jspbook" default="build" basedir=".">
      <target name="build">
        <echo>Starting Build </echo>
        <!-- Turn Tomcat Off -->
        <antcall target="tomcatOff"/>
        <!-- Compile Everything -->
        <antcall target="compile"/>
        <!-- Turn Tomcat On -->
        <antcall target="tomcatOn"/>
        <echo>Build Finished </echo>
      </target>
      <target name="tomcatOff">
        <echo>Turning Off Tomcat </echo>
        <exec executable="bash" os="Windows">
          <arg value="../../bin/shutdown.bat"/>
        </exec>
        <exec executable="bash" os="Linux">
          <arg value="../../bin/shutdown.sh"/>
        </exec>
      </target>
      <target name="tomcatOn">
        <echo>Starting Tomcat </echo>
        <exec executable="bash" os="Windows">
          <arg value="../../bin/startup.bat"/>
        </exec>
        <exec executable="bash" os="Linux">
          <arg value="../../bin/startup.sh"/>
        </exec>
      </target>
      <target name="compile">
        <javac
          srcdir="WEB-INF/classes"
          extdirs="WEB-INF/lib:../../common/lib"
          classpath="../../common/lib/servlet.jar"
          deprecation="yes"
          verbose="no">
          <include name="com/jspbook/**"/>
        </javac>
      </target>
    </project>compile success, but error in IE
    paste the sample class file in,restart tomcat. i work again!
    what is the problem!
    even i compile the code inside the Jcreator, after set required libraries to servlet.jar or servlet-api.jar
    compile it, success then run it in IE, same error!!!.
    what should i do.
    stil a beginer in servlet and jsp anyway.

    and Apache tomcat originally dont have servlet.jar but servlet-api.jar, i copy the servlet.jar from my friend servlet.jar is an OLD version, you should only use servlet-api.jar!
    wrong name: HelloWorldPerhaps there is a mistake in the class or packagename of the source file. Post the source here.

  • [RESOLVED] Unable to move dev directory for Apache, keep getting 403

    Hello,
    I'd like to move my default /srv/http directory for my PHP pages to a different location (somewhere in my home directory) for convenience.  This is exclusively for local development.  However, after making the same change in two places, I restarted Apache and keep getting a 403 error.
    Here is my httpd.conf:
    # This is the main Apache HTTP server configuration file. It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
    # In particular, see
    # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
    # for a discussion of each configuration directive.
    # Do NOT simply read the instructions in here without understanding
    # what they do. They're here only as hints or reminders. If you are unsure
    # consult the online docs. You have been warned.
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path. If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so 'log/access_log'
    # with ServerRoot set to '/www' will be interpreted by the
    # server as '/www/log/access_log', where as '/log/access_log' will be
    # interpreted as '/log/access_log'.
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    # Do not add a slash at the end of the directory path. If you point
    # ServerRoot at a non-local disk, be sure to point the LockFile directive
    # at a local disk. If you wish to share the same ServerRoot for multiple
    # httpd daemons, you will need to change at least LockFile and PidFile.
    ServerRoot "/etc/httpd"
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    # Change this to Listen on specific IP addresses as shown below to
    # prevent Apache from glomming onto all bound IP addresses.
    #Listen 12.34.56.78:80
    Listen 127.0.0.1:80
    # Dynamic Shared Object (DSO) Support
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    LoadModule authn_file_module modules/mod_authn_file.so
    LoadModule authn_dbm_module modules/mod_authn_dbm.so
    LoadModule authn_anon_module modules/mod_authn_anon.so
    LoadModule authn_dbd_module modules/mod_authn_dbd.so
    LoadModule authn_default_module modules/mod_authn_default.so
    LoadModule authz_host_module modules/mod_authz_host.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_user_module modules/mod_authz_user.so
    LoadModule authz_dbm_module modules/mod_authz_dbm.so
    LoadModule authz_owner_module modules/mod_authz_owner.so
    LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
    LoadModule authz_default_module modules/mod_authz_default.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    LoadModule auth_digest_module modules/mod_auth_digest.so
    LoadModule file_cache_module modules/mod_file_cache.so
    LoadModule cache_module modules/mod_cache.so
    LoadModule disk_cache_module modules/mod_disk_cache.so
    LoadModule mem_cache_module modules/mod_mem_cache.so
    LoadModule dbd_module modules/mod_dbd.so
    LoadModule dumpio_module modules/mod_dumpio.so
    LoadModule reqtimeout_module modules/mod_reqtimeout.so
    LoadModule ext_filter_module modules/mod_ext_filter.so
    LoadModule include_module modules/mod_include.so
    LoadModule filter_module modules/mod_filter.so
    LoadModule substitute_module modules/mod_substitute.so
    LoadModule deflate_module modules/mod_deflate.so
    LoadModule ldap_module modules/mod_ldap.so
    LoadModule log_config_module modules/mod_log_config.so
    LoadModule log_forensic_module modules/mod_log_forensic.so
    LoadModule logio_module modules/mod_logio.so
    LoadModule env_module modules/mod_env.so
    LoadModule mime_magic_module modules/mod_mime_magic.so
    LoadModule cern_meta_module modules/mod_cern_meta.so
    LoadModule expires_module modules/mod_expires.so
    LoadModule headers_module modules/mod_headers.so
    LoadModule ident_module modules/mod_ident.so
    LoadModule usertrack_module modules/mod_usertrack.so
    LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule setenvif_module modules/mod_setenvif.so
    LoadModule version_module modules/mod_version.so
    LoadModule proxy_module modules/mod_proxy.so
    LoadModule proxy_connect_module modules/mod_proxy_connect.so
    LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule proxy_http_module modules/mod_proxy_http.so
    LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
    LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    LoadModule ssl_module modules/mod_ssl.so
    LoadModule mime_module modules/mod_mime.so
    LoadModule dav_module modules/mod_dav.so
    LoadModule status_module modules/mod_status.so
    LoadModule autoindex_module modules/mod_autoindex.so
    LoadModule asis_module modules/mod_asis.so
    LoadModule info_module modules/mod_info.so
    LoadModule suexec_module modules/mod_suexec.so
    LoadModule cgi_module modules/mod_cgi.so
    LoadModule cgid_module modules/mod_cgid.so
    LoadModule dav_fs_module modules/mod_dav_fs.so
    LoadModule vhost_alias_module modules/mod_vhost_alias.so
    LoadModule negotiation_module modules/mod_negotiation.so
    LoadModule dir_module modules/mod_dir.so
    # enable PHP.
    LoadModule php5_module modules/libphp5.so
    LoadModule imagemap_module modules/mod_imagemap.so
    LoadModule actions_module modules/mod_actions.so
    LoadModule speling_module modules/mod_speling.so
    LoadModule userdir_module modules/mod_userdir.so
    LoadModule alias_module modules/mod_alias.so
    LoadModule rewrite_module modules/mod_rewrite.so
    <IfModule !mpm_netware_module>
    <IfModule !mpm_winnt_module>
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    User http
    Group http
    </IfModule>
    </IfModule>
    # 'Main' server configuration
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition. These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed. This address appears on some server-generated pages, such
    # as error documents. e.g. [email protected]
    ServerAdmin [email protected]
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #ServerName www.example.com:80
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    DocumentRoot "/home/local_user/Documents/development/php"
    # Each directory to which Apache has access can be configured with respect
    # to which services and features are allowed and/or disabled in that
    # directory (and its subdirectories).
    # First, we configure the "default" to be a very restrictive set of
    # features.
    <Directory />
    Options FollowSymLinks
    AllowOverride None
    Order deny,allow
    Deny from all
    </Directory>
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    # This should be changed to whatever you set DocumentRoot to.
    <Directory "/home/local_user/Documents/development/php">
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    # The Options directive is both complicated and important. Please see
    # http://httpd.apache.org/docs/2.2/mod/core.html#options
    # for more information.
    Options Indexes FollowSymLinks
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    # Options FileInfo AuthConfig Limit
    AllowOverride None
    # Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
    </Directory>
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    <IfModule dir_module>
    DirectoryIndex index.html
    </IfModule>
    # The following lines prevent .htaccess and .htpasswd files from being
    # viewed by Web clients.
    <FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
    Satisfy All
    </FilesMatch>
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here. If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    ErrorLog "/var/log/httpd/error_log"
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    LogLevel warn
    <IfModule log_config_module>
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
    LogFormat "%h %l %u %t \"%r\" %>s %b" common
    <IfModule logio_module>
    # You need to enable mod_logio.c to use %I and %O
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here. Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    CustomLog "/var/log/httpd/access_log" common
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #CustomLog "/var/log/httpd/access_log" combined
    </IfModule>
    <IfModule alias_module>
    # Redirect: Allows you to tell clients about documents that used to
    # exist in your server's namespace, but do not anymore. The client
    # will make a new request for the document at its new location.
    # Example:
    # Redirect permanent /foo http://www.example.com/bar
    # Alias: Maps web paths into filesystem paths and is used to
    # access content that does not live under the DocumentRoot.
    # Example:
    # Alias /webpath /full/filesystem/path
    # If you include a trailing / on /webpath then the server will
    # require it to be present in the URL. You will also likely
    # need to provide a <Directory> section to allow access to
    # the filesystem path.
    # ScriptAlias: This controls which directories contain server scripts.
    # ScriptAliases are essentially the same as Aliases, except that
    # documents in the target directory are treated as applications and
    # run by the server when requested rather than as documents sent to the
    # client. The same rules about trailing "/" apply to ScriptAlias
    # directives as to Alias.
    ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
    </IfModule>
    <IfModule cgid_module>
    # ScriptSock: On threaded servers, designate the path to the UNIX
    # socket used to communicate with the CGI daemon of mod_cgid.
    #Scriptsock /run/httpd/cgisock
    </IfModule>
    # "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    <Directory "/srv/http/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
    </Directory>
    # DefaultType: the default MIME type the server will use for a document
    # if it cannot otherwise determine one, such as from filename extensions.
    # If your server contains mostly text or HTML documents, "text/plain" is
    # a good value. If most of your content is binary, such as applications
    # or images, you may want to use "application/octet-stream" instead to
    # keep browsers from trying to display binary files as though they are
    # text.
    DefaultType text/plain
    <IfModule mime_module>
    # TypesConfig points to the file containing the list of mappings from
    # filename extension to MIME-type.
    TypesConfig conf/mime.types
    # AddType allows you to add to or override the MIME configuration
    # file specified in TypesConfig for specific file types.
    #AddType application/x-gzip .tgz
    # AddEncoding allows you to have certain browsers uncompress
    # information on the fly. Note: Not all browsers support this.
    #AddEncoding x-compress .Z
    #AddEncoding x-gzip .gz .tgz
    # If the AddEncoding directives above are commented-out, then you
    # probably should define those extensions to indicate media types:
    AddType application/x-compress .Z
    AddType application/x-gzip .gz .tgz
    # AddHandler allows you to map certain file extensions to "handlers":
    # actions unrelated to filetype. These can be either built into the server
    # or added with the Action directive (see below)
    # To use CGI scripts outside of ScriptAliased directories:
    # (You will also need to add "ExecCGI" to the "Options" directive.)
    #AddHandler cgi-script .cgi
    # For type maps (negotiated resources):
    #AddHandler type-map var
    # Filters allow you to process content before it is sent to the client.
    # To parse .shtml files for server-side includes (SSI):
    # (You will also need to add "Includes" to the "Options" directive.)
    #AddType text/html .shtml
    #AddOutputFilter INCLUDES .shtml
    MIMEMagicFile conf/magic
    </IfModule>
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type. The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #MIMEMagicFile conf/magic
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html
    # MaxRanges: Maximum number of Ranges in a request before
    # returning the entire resource, or one of the special
    # values 'default', 'none' or 'unlimited'.
    # Default setting is to accept 200 Ranges.
    #MaxRanges unlimited
    # EnableMMAP and EnableSendfile: On systems that support it,
    # memory-mapping or the sendfile syscall is used to deliver
    # files. This usually improves server performance, but must
    # be turned off when serving from networked-mounted
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    #EnableMMAP off
    #EnableSendfile off
    # Supplemental configuration
    # The configuration files in the conf/extra/ directory can be
    # included to add extra features or to modify the default configuration of
    # the server, or you may simply copy their contents here and change as
    # necessary.
    # Server-pool management (MPM specific)
    #Include conf/extra/httpd-mpm.conf
    # Multi-language error messages
    Include conf/extra/httpd-multilang-errordoc.conf
    # Fancy directory listings
    Include conf/extra/httpd-autoindex.conf
    # Language settings
    Include conf/extra/httpd-languages.conf
    # User home directories
    Include conf/extra/httpd-userdir.conf
    # Real-time info on requests and configuration
    #Include conf/extra/httpd-info.conf
    # Virtual hosts
    #Include conf/extra/httpd-vhosts.conf
    # Local access to the Apache HTTP Server Manual
    #Include conf/extra/httpd-manual.conf
    # Distributed authoring and versioning (WebDAV)
    #Include conf/extra/httpd-dav.conf
    # Various default settings
    Include conf/extra/httpd-default.conf
    # enable the PHP5 module.
    Include conf/extra/php5_module.conf
    # Secure (SSL/TLS) connections
    #Include conf/extra/httpd-ssl.conf
    # Note: The following must must be present to support
    # starting without SSL on platforms with no /dev/random equivalent
    # but a statically compiled-in mod_ssl.
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>
    Last edited by publicus (2014-02-02 18:06:07)

    WorMzy wrote:
    Switch to the http user and see if you can manually browse to the directory.
    # su -s /bin/bash - http
    Find out where the user can't get to, and fix the permissions.
    You're right.  I can't get there.
    I tried to make Apache start up as me (my user), but got an error that said that it cannot start it up like that.  I think I have a possible solution for the given problem.  I'll my user to the http group and then work from /srv/http.
    I'd love to get some feedback if someone has a different approach .  I love to learn from the experience of others .

  • [Solved]Lighttpd and php/fcgi

    I installed and configured lighttpd and php/fcgi exactly as found http://wiki.archlinux.org/index.php/Lig … nd_Non-SSL except for: ssl and eaccelerator. I am also running php with the lighttpd user instead of phpuser.
    I have done chmod 775 for /var/run/ligghtpd and chown lighttpd -R /var/run/lighttpd and still get these errors.
    2008-05-02 10:14:28: (log.c.75) server started
    2008-05-02 10:14:28: (mod_fastcgi.c.904) bind failed for: unix:/var/run/lighttpd/php-fastcgi.socket-0 Permission denied
    2008-05-02 10:14:28: (mod_fastcgi.c.1340) [ERROR]: spawning fcgi failed.
    2008-05-02 10:14:28: (server.c.908) Configuration of plugins failed. Going down.
    But if I stop /etc/rc.d/spawn-php, and restart my server, everything works perfectly, the phpinfo page, and a basic php include.
    my /etc/php/php.ini
    [PHP]
    ; About php.ini ;
    ; This file controls many aspects of PHP's behavior. In order for PHP to
    ; read it, it must be named 'php.ini'. PHP looks for it in the current
    ; working directory, in the path designated by the environment variable
    ; PHPRC, and in the path that was defined in compile time (in that order).
    ; The path in which the php.ini file is looked for can be overridden using
    ; the -c argument in command line mode.
    ; The syntax of the file is extremely simple. Whitespace and Lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = none ; sets foo to an empty string
    ; foo = "none" ; sets foo to the string 'none'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; This is the recommended, PHP 5-style version of the php.ini-dist file. It
    ; sets some non standard settings, that make PHP more efficient, more secure,
    ; and encourage cleaner coding.
    ; The price is that with these settings, PHP may be incompatible with some
    ; applications, and sometimes, more difficult to develop with. Using this
    ; file is warmly recommended for production sites. As all of the changes from
    ; the standard settings are thoroughly documented, you can go over each one,
    ; and decide whether you want to use it or not.
    ; For general information about the php.ini file, please consult the php.ini-dist
    ; file, included in your PHP distribution.
    ; This file is different from the php.ini-dist file in the fact that it features
    ; different values for several directives, in order to improve performance, while
    ; possibly breaking compatibility with the standard out-of-the-box behavior of
    ; PHP. Please make sure you read what's different, and modify your scripts
    ; accordingly, if you decide to use this file instead.
    ; - register_long_arrays = Off [Performance]
    ; Disables registration of the older (and deprecated) long predefined array
    ; variables ($HTTP_*_VARS). Instead, use the superglobals that were
    ; introduced in PHP 4.1.0
    ; - display_errors = Off [Security]
    ; With this directive set to off, errors that occur during the execution of
    ; scripts will no longer be displayed as a part of the script output, and thus,
    ; will no longer be exposed to remote users. With some errors, the error message
    ; content may expose information about your script, web server, or database
    ; server that may be exploitable for hacking. Production sites should have this
    ; directive set to off.
    ; - log_errors = On [Security]
    ; This directive complements the above one. Any errors that occur during the
    ; execution of your script will be logged (typically, to your server's error log,
    ; but can be configured in several ways). Along with setting display_errors to off,
    ; this setup gives you the ability to fully understand what may have gone wrong,
    ; without exposing any sensitive information to remote users.
    ; - output_buffering = 4096 [Performance]
    ; Set a 4KB output buffer. Enabling output buffering typically results in less
    ; writes, and sometimes less packets sent on the wire, which can often lead to
    ; better performance. The gain this directive actually yields greatly depends
    ; on which Web server you're working with, and what kind of scripts you're using.
    ; - register_argc_argv = Off [Performance]
    ; Disables registration of the somewhat redundant $argv and $argc global
    ; variables.
    ; - magic_quotes_gpc = Off [Performance]
    ; Input data is no longer escaped with slashes so that it can be sent into
    ; SQL databases without further manipulation. Instead, you should use the
    ; function addslashes() on each input element you wish to send to a database.
    ; - variables_order = "GPCS" [Performance]
    ; The environment variables are not hashed into the $_ENV. To access
    ; environment variables, you can use getenv() instead.
    ; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
    ; By default, PHP suppresses errors of type E_NOTICE. These error messages
    ; are emitted for non-critical errors, but that could be a symptom of a bigger
    ; problem. Most notably, this will cause error messages about the use
    ; of uninitialized variables to be displayed.
    ; - allow_call_time_pass_reference = Off [Code cleanliness]
    ; It's not possible to decide to force a variable to be passed by reference
    ; when calling a function. The PHP 4 style to do this is by making the
    ; function require the relevant argument by reference.
    ; - short_open_tag = Off [Portability]
    ; Using short tags is discouraged when developing code meant for redistribution
    ; since short tags may not be supported on the target server.
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    engine = On
    ; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
    zend.ze1_compatibility_mode = Off
    ; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
    ; NOTE: Using short tags should be avoided when developing applications or
    ; libraries that are meant for redistribution, or deployment on PHP
    ; servers which are not under your control, because short tags may not
    ; be supported on the target server. For portable, redistributable code,
    ; be sure not to use short tags.
    short_open_tag = Off
    ; Allow ASP-style <% %> tags.
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    precision = 14
    ; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
    y2k_compliance = On
    ; Output buffering allows you to send header lines (including cookies) even
    ; after you send body content, at the price of slowing PHP's output layer a
    ; bit. You can enable output buffering during runtime by calling the output
    ; buffering functions. You can also enable output buffering for all files by
    ; setting this directive to On. If you wish to limit the size of the buffer
    ; to a certain size - you can use a maximum number of bytes instead of 'On', as
    ; a value for this directive (e.g., output_buffering=4096).
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    zlib.output_compression = On
    ;zlib.output_compression_level = -1
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    implicit_flush = Off
    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated.
    ; A warning appears if the specified function is not defined, or if the
    ; function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func=
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 100
    ; Whether to enable the ability to force arguments to be passed by reference
    ; at function call time. This method is deprecated and is likely to be
    ; unsupported in future versions of PHP/Zend. The encouraged method of
    ; specifying which arguments should be passed by reference is in the function
    ; declaration. You're encouraged to try and turn this option Off and make
    ; sure your scripts work properly with it in order to ensure they will work
    ; with future versions of the language (you will receive a warning each time
    ; you use this feature, and the argument will be passed by value instead of by
    ; reference).
    allow_call_time_pass_reference = Off
    ; Safe Mode
    safe_mode = Off
    ; By default, Safe Mode does a UID compare check when
    ; opening files. If you want to relax this to a GID compare,
    ; then turn on safe_mode_gid.
    safe_mode_gid = Off
    ; When safe_mode is on, UID/GID checks are bypassed when
    ; including files from this directory and its subdirectories.
    ; (directory must also be in include_path or full path must
    ; be used when including)
    safe_mode_include_dir =
    ; When safe_mode is on, only executables located in the safe_mode_exec_dir
    ; will be allowed to be executed via the exec family of functions.
    safe_mode_exec_dir =
    ; Setting certain environment variables may be a potential security breach.
    ; This directive contains a comma-delimited list of prefixes. In Safe Mode,
    ; the user may only alter environment variables whose names begin with the
    ; prefixes supplied here. By default, users will only be able to set
    ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
    ; Note: If this directive is empty, PHP will let the user modify ANY
    ; environment variable!
    safe_mode_allowed_env_vars = PHP_
    ; This directive contains a comma-delimited list of environment variables that
    ; the end user won't be able to change using putenv(). These variables will be
    ; protected even if safe_mode_allowed_env_vars is set to allow to change them.
    safe_mode_protected_env_vars = LD_LIBRARY_PATH
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    open_basedir = /home/:/tmp/:/usr/share/pear/
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.bg = #FFFFFF
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long request, which may end up
    ; being interrupted by the user or a browser timing out.
    ; ignore_user_abort = On
    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; realpath_cache_size=16k
    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; realpath_cache_ttl=120
    ; Misc
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    expose_php = Off
    ; Resource Limits ;
    max_execution_time = 30 ; Maximum execution time of each script, in seconds
    max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
    ;max_input_nesting_level = 64 ; Maximum input variable nesting level
    memory_limit = 32M ; Maximum amount of memory a script may consume (32MB)
    ; Error handling and logging ;
    ; error_reporting is a bit-field. Or each number up to get desired error
    ; reporting level
    ; E_ALL - All errors and warnings (doesn't include E_STRICT)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; Examples:
    ; - Show all errors, except for notices and coding standards warnings
    ;error_reporting = E_ALL & ~E_NOTICE
    ; - Show all errors, except for notices
    ;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
    ; - Show only errors
    ;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
    ; - Show all errors, except coding standards warnings
    error_reporting = E_ALL
    ; Print out errors (as a part of the output). For production web sites,
    ; you're strongly encouraged to turn this feature off, and use error logging
    ; instead (see below). Keeping display_errors enabled on a production web site
    ; may reveal security information to end users, such as file paths on your Web
    ; server, your database schema or other information.
    ; possible values for display_errors:
    ; Off - Do not display any errors
    ; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
    ; On or stdout - Display errors to STDOUT (default)
    ; To output errors to STDERR with CGI/CLI:
    ;display_errors = "stderr"
    ; Default
    display_errors = Off
    ; Even when display_errors is on, errors that occur during PHP's startup
    ; sequence are not displayed. It's strongly recommended to keep
    ; display_startup_errors off, except for when debugging.
    display_startup_errors = Off
    ; Log errors into a log file (server-specific log, stderr, or error_log (below))
    ; As stated above, you're strongly advised to use error logging in place of
    ; error displaying on production web sites.
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line until ignore_repeated_source is set true.
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    report_memleaks = Off
    ;report_zend_debug = 0
    ; Store the last error/warning message in $php_errormsg (boolean).
    track_errors = Off
    ; Disable the inclusion of HTML tags in error messages.
    ; Note: Never use this feature for production boxes.
    ;html_errors = Off
    ; If html_errors is set On PHP produces clickable error messages that direct
    ; to a page describing the error or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://www.php.net/docs.php
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot.
    ; Note: Never use this feature for production boxes.
    ;docref_root = "/phpmanual/"
    ;docref_ext = .html
    ; String to output before an error message.
    ;error_prepend_string = "<font color=ff0000>"
    ; String to output after an error message.
    ;error_append_string = "</font>"
    ; Log errors to specified file.
    ;error_log = filename
    ; Log errors to syslog.
    error_log = syslog
    ; Data Handling ;
    ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
    ; The separator used in PHP generated URLs to separate arguments.
    ; Default is "&".
    ;arg_separator.output = "&"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; Default is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ;arg_separator.input = ";&"
    ; This directive describes the order in which PHP registers GET, POST, Cookie,
    ; Environment and Built-in variables (G, P, C, E & S respectively, often
    ; referred to as EGPCS or GPC). Registration is done from left to right, newer
    ; values override older values.
    variables_order = "GPCS"
    ; Whether or not to register the EGPCS variables as global variables. You may
    ; want to turn this off if you don't want to clutter your scripts' global scope
    ; with user data. This makes most sense when coupled with track_vars - in which
    ; case you can access all of the GPC variables through the $HTTP_*_VARS[],
    ; variables.
    ; You should do your best to write your scripts so that they do not require
    ; register_globals to be on; Using form variables as globals can easily lead
    ; to possible security problems, if the code is not very well thought of.
    register_globals = Off
    ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
    ; and friends. If you're not using them, it's recommended to turn them off,
    ; for performance reasons.
    register_long_arrays = Off
    ; This directive tells PHP whether to declare the argv&argc variables (that
    ; would contain the GET information). If you don't use these variables, you
    ; should turn it off for increased performance.
    register_argc_argv = Off
    ; When enabled, the SERVER and ENV variables are created when they're first
    ; used (Just In Time) instead of when the script starts. If these variables
    ; are not used within a script, having this directive on will result in a
    ; performance gain. The PHP directives register_globals, register_long_arrays,
    ; and register_argc_argv must be disabled for this directive to have any affect.
    auto_globals_jit = On
    ; Maximum size of POST data that PHP will accept.
    post_max_size = 8M
    ; Magic quotes
    ; Magic quotes for incoming GET/POST/Cookie data.
    magic_quotes_gpc = Off
    ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
    magic_quotes_runtime = Off
    ; Use Sybase-style magic quotes (escape ' with '' instead of \').
    magic_quotes_sybase = Off
    ; Automatically add files before or after any PHP document.
    auto_prepend_file =
    auto_append_file =
    ; As of 4.0b4, PHP always outputs a character encoding by default in
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    default_mimetype = "text/html"
    ;default_charset = "iso-8859-1"
    ; Always populate the $HTTP_RAW_POST_DATA variable.
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    include_path = ".:/usr/share/pear"
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    extension_dir = "/usr/lib/php/20060613/"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    enable_dl = Off
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request.
    ; cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; cgi.redirect_status_env = ;
    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    cgi.fix_pathinfo=1
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; fastcgi.impersonate = 1;
    ; Disable logging through FastCGI connection
    ; fastcgi.logging = 0
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    upload_max_filesize = 2M
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    allow_url_fopen = Off
    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    allow_url_include = Off
    ; Define the anonymous ftp password (your email address)
    ;from="[email protected]"
    ; Define the User-Agent string
    ; user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    default_socket_timeout = 60
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, under UNIX:
    ; extension=msql.so
    ; Note that it should be the name of the module only; no directory information
    ; needs to go here. Specify the location of the extension with the
    ; extension_dir directive above.
    ; Module Settings ;
    [Date]
    ; Defines the default timezone used by the date functions
    ;date.timezone =
    ;date.default_latitude = 31.7667
    ;date.default_longitude = 35.2333
    ;date.sunrise_zenith = 90.583333
    ;date.sunset_zenith = 90.583333
    [filter]
    ;filter.default = unsafe_raw
    ;filter.default_flags =
    [iconv]
    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1
    [sqlite]
    ;sqlite.assoc_case = 0
    [xmlrpc]
    ;xmlrpc_error_number = 0
    ;xmlrpc_errors = 0
    [Pcre]
    ;PCRE library backtracking limit.
    ;pcre.backtrack_limit=100000
    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).
    ;pcre.recursion_limit=100000
    [Syslog]
    ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
    ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
    ; runtime, you can define these variables by calling define_syslog_variables().
    define_syslog_variables = Off
    [mail function]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    [SQL]
    sql.safe_mode = Off
    [ODBC]
    ;odbc.default_db = Not yet implemented
    ;odbc.default_user = Not yet implemented
    ;odbc.default_pw = Not yet implemented
    ; Allow or prevent persistent links.
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of uodbc.defaultlrl and uodbc.defaultbinmode
    odbc.defaultbinmode = 1
    [MySQL]
    ; Allow or prevent persistent links.
    mysql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysql.default_password =
    ; Maximum time (in seconds) for connect timeout. -1 means no limit
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
    ; SQL-Errors will be displayed.
    mysql.trace_mode = Off
    [MySQLi]
    ; Maximum number of links. -1 means no limit.
    mysqli.max_links = -1
    ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysqli.default_pw =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mSQL]
    ; Allow or prevent persistent links.
    msql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    msql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    msql.max_links = -1
    [OCI8]
    ; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
    ;oci8.privileged_connect = Off
    ; Connection: The maximum number of persistent OCI8 connections per
    ; process. Using -1 means no limit.
    ;oci8.max_persistent = -1
    ; Connection: The maximum number of seconds a process is allowed to
    ; maintain an idle persistent connection. Using -1 means idle
    ; persistent connections will be maintained forever.
    ;oci8.persistent_timeout = -1
    ; Connection: The number of seconds that must pass before issuing a
    ; ping during oci_pconnect() to check the connection validity. When
    ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
    ; pings completely.
    ;oci8.ping_interval = 60
    ; Tuning: This option enables statement caching, and specifies how
    ; many statements to cache. Using 0 disables statement caching.
    ;oci8.statement_cache_size = 20
    ; Tuning: Enables statement prefetching and sets the default number of
    ; rows that will be fetched automatically after statement execution.
    ;oci8.default_prefetch = 10
    ; Compatibility. Using On means oci_close() will not close
    ; oci_connect() and oci_new_connect() connections.
    ;oci8.old_oci_close_semantics = Off
    [PostgresSQL]
    ; Allow or prevent persistent links.
    pgsql.allow_persistent = On
    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    pgsql.auto_reset_persistent = Off
    ; Maximum number of persistent links. -1 means no limit.
    pgsql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    pgsql.max_links = -1
    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    pgsql.ignore_notice = 0
    ; Log PostgreSQL backends Noitce message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    pgsql.log_notice = 0
    [Sybase]
    ; Allow or prevent persistent links.
    sybase.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybase.max_links = -1
    ;sybase.interface_file = "/usr/sybase/interfaces"
    ; Minimum error severity to display.
    sybase.min_error_severity = 10
    ; Minimum message severity to display.
    sybase.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    ; If on, this will cause PHP to automatically assign types to results according
    ; to their Sybase type, instead of treating them all as strings. This
    ; compatibility mode will probably not stay around forever, so try applying
    ; whatever necessary changes to your code, and turn it off.
    sybase.compatability_mode = Off
    [Sybase-CT]
    ; Allow or prevent persistent links.
    sybct.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybct.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybct.max_links = -1
    ; Minimum server message severity to display.
    sybct.min_server_severity = 10
    ; Minimum client message severity to display.
    sybct.min_client_severity = 10
    [bcmath]
    ; Number of decimal digits for all bcmath functions.
    bcmath.scale = 0
    [browscap]
    ;browscap = extra/browscap.ini
    [Informix]
    ; Default host for ifx_connect() (doesn't apply in safe mode).
    ifx.default_host =
    ; Default user for ifx_connect() (doesn't apply in safe mode).
    ifx.default_user =
    ; Default password for ifx_connect() (doesn't apply in safe mode).
    ifx.default_password =
    ; Allow or prevent persistent links.
    ifx.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ifx.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ifx.max_links = -1
    ; If on, select statements return the contents of a text blob instead of its id.
    ifx.textasvarchar = 0
    ; If on, select statements return the contents of a byte blob instead of its id.
    ifx.byteasvarchar = 0
    ; Trailing blanks are stripped from fixed-length char columns. May help the
    ; life of Informix SE users.
    ifx.charasvarchar = 0
    ; If on, the contents of text and byte blobs are dumped to a file instead of
    ; keeping them in memory.
    ifx.blobinfile = 0
    ; NULL's are returned as empty strings, unless this is set to 1. In that case,
    ; NULL's are returned as string 'NULL'.
    ifx.nullformat = 0
    [Session]
    ; Handler used to store/retrieve data.
    session.save_handler = files
    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored.
    ; As of PHP 4.0.1, you can define the path as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    session.save_path = "/tmp"
    ; Whether to use cookies.
    session.use_cookies = 1
    ;session.cookie_secure =
    ; This option enables administrators to make their users invulnerable to
    ; attacks which involve passing session ids in URLs; defaults to 0.
    ; session.use_only_cookies = 1
    ; Name of the session (used as cookie name).
    session.name = PHPSESSID
    ; Initialize session on request startup.
    session.auto_start = 0
    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    session.cookie_lifetime = 0
    ; The path for which the cookie is valid.
    session.cookie_path = /
    ; The domain for which the cookie is valid.
    session.cookie_domain =
    ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
    session.cookie_httponly =
    ; Handler used to serialize data. php is the standard serializer of PHP.
    session.serialize_handler = php
    ; Define the probability that the 'garbage collection' process is started
    ; on every session initialization.
    ; The probability is calculated by using gc_probability/gc_divisor,
    ; e.g. 1/100 means there is a 1% chance that the GC process starts
    ; on each request.
    session.gc_probability = 1
    session.gc_divisor = 1000
    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    session.gc_maxlifetime = 1440
    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; cd /path/to/sessions; find -cmin +24 | xargs rm
    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope, albeit register_globals
    ; is disabled. PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning separately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled.
    session.bug_compat_42 = 0
    session.bug_compat_warn = 1
    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    session.referer_check =
    ; How many bytes to read from the file.
    session.entropy_length = 0
    ; Specified here to create the session id.
    session.entropy_file =
    ;session.entropy_length = 16
    ;session.entropy_file = /dev/urandom
    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    session.cache_limiter = nocache
    ; Document expires after n minutes.
    session.cache_expire = 180
    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publically accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    session.use_trans_sid = 0
    ; Select a hash function
    ; 0: MD5 (128 bits)
    ; 1: SHA-1 (160 bits)
    session.hash_function = 0
    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; 4 bits: 0-9, a-f
    ; 5 bits: 0-9, a-v
    ; 6 bits: 0-9, a-z, A-Z, "-", ","
    session.hash_bits_per_character = 5
    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
    [MSSQL]
    ; Allow or prevent persistent links.
    mssql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1
    ; Minimum error severity to display.
    mssql.min_error_severity = 10
    ; Minimum message severity to display.
    mssql.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off
    ; Connect timeout
    ;mssql.connect_timeout = 5
    ; Query timeout
    ;mssql.timeout = 60
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096
    ; Limits the number of records in each batch. 0 = all records in one batch.
    ;mssql.batchsize = 0
    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On
    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off
    ; Specify max number of processes. -1 = library default
    ; msdlib defaults to 25
    ; FreeTDS defaults to 4096
    ;mssql.max_procs = -1
    ; Specify client character set.
    ; If empty or not set the client charset from freetds.comf is used
    ; This is only used when compiled with FreeTDS
    ;mssql.charset = "ISO-8859-1"
    [Assertion]
    ; Assert(expr); active by default.
    ;assert.active = On
    ; Issue a PHP warning for each failed assertion.
    ;assert.warning = On
    ; Don't bail out by default.
    ;assert.bail = Off
    ; User-function to be called if an assertion fails.
    ;assert.callback = 0
    ; Eval the expression with current error_reporting(). Set to true if you want
    ; error_reporting(0) around the eval().
    ;assert.quiet_eval = 0
    [COM]
    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constant registrations
    ;com.autoregister_verbose = true
    [mbstring]
    ; language for internal character representation.
    ;mbstring.language = Japanese
    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ;mbstring.internal_encoding = EUC-JP
    ; http input encoding.
    ;mbstring.http_input = auto
    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ;mbstring.http_output = SJIS
    ; enable automatic encoding translation according to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ;mbstring.encoding_translation = Off
    ; automatic encoding detection order.
    ; auto means
    ;mbstring.detect_order = auto
    ; substitute_character used when character cannot be converted
    ; one from another
    ;mbstring.substitute_character = none;
    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ;mbstring.func_overload = 0
    ; enable strict encoding detection.
    ;mbstring.strict_encoding = Off
    [FrontBase]
    ;fbsql.allow_persistent = On
    ;fbsql.autocommit = On
    ;fbsql.show_timestamp_decimals = Off
    ;fbsql.default_database =
    ;fbsql.default_database_password =
    ;fbsql.default_host =
    ;fbsql.default_password =
    ;fbsql.default_user = "_SYSTEM"
    ;fbsql.generate_warnings = Off
    ;fbsql.max_connections = 128
    ;fbsql.max_links = 128
    ;fbsql.max_persistent = -1
    ;fbsql.max_results = 128
    [gd]
    ; Tell the jpeg decode to libjpeg warnings and try to create
    ; a gd image. The warning will then be displayed as notices
    ; disabled by default
    ;gd.jpeg_ignore_warning = 0
    [exif]
    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
    ; With mbstring support this will automatically be converted into the encoding
    ; given by corresponding encode setting. When empty mbstring.internal_encoding
    ; is used. For the decode settings you can distinguish between motorola and
    ; intel byte order. A decode setting cannot be empty.
    ;exif.encode_unicode = ISO-8859-15
    ;exif.decode_unicode_motorola = UCS-2BE
    ;exif.decode_unicode_intel = UCS-2LE
    ;exif.encode_jis =
    ;exif.decode_jis_motorola = JIS
    ;exif.decode_jis_intel = JIS
    [Tidy]
    ; The path to a default tidy configuration file to use when using tidy
    ;tidy.default_config = /usr/local/lib/php/default.tcfg
    ; Should tidy clean and repair output automatically?
    ; WARNING: Do not use this option if you are generating non-html content
    ; such as dynamic images
    tidy.clean_output = Off
    [soap]
    ; Enables or disables WSDL caching feature.
    soap.wsdl_cache_enabled=1
    ; Sets the directory name where SOAP extension will put cache files.
    soap.wsdl_cache_dir="/tmp"
    ; (time to live) Sets the number of second while cached file will be used
    ; instead of original one.
    soap.wsdl_cache_ttl=86400
    ; available extensions
    ;extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    ;extension=curl.so
    ;extension=dba.so
    ;extension=dbase.so
    ;extension=exif.so
    ;extension=ftp.so
    ;extension=gd.so
    extension=gettext.so
    ;extension=iconv.so
    ;extension=imap.so
    ;extension=json.so
    ;extension=ldap.so
    ;extension=mcrypt.so
    ;extension=mime_magic.so
    ;extension=mysql.so
    ;extension=mysqli.so
    ;extension=ncurses.so
    ;extension=odbc.so
    ;extension=openssl.so
    ;extension=pdo.so
    ;extension=pdo_mysql.so
    ;extension=pdo_odbc.so
    ;extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    ;extension=pgsql.so
    ;extension=posix.so
    ;extension=pspell.so
    extension=session.so
    ;extension=shmop.so
    ;extension=snmp.so
    ;extension=soap.so
    ;extension=sockets.so
    ;extension=sqlite.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    extension=zlib.so
    ; Local Variables:
    ; tab-width: 4
    ; End:
    my /etc/lighttpd/lighttpd.conf
    # lighttpd configuration file
    # use it as a base for lighttpd 1.0.0 and above
    # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $
    ############ Options you really have to take care of ####################
    ## modules to load
    # at least mod_access and mod_accesslog should be loaded
    # all other module should only be loaded if really neccesary
    # - saves some time
    # - saves memory
    server.modules = (
    # "mod_rewrite",
    # "mod_redirect",
    # "mod_alias",
    "mod_access",
    # "mod_cml",
    # "mod_trigger_b4_dl",
    # "mod_auth",
    # "mod_status",
    # "mod_setenv",
    "mod_fastcgi",
    # "mod_proxy",
    # "mod_simple_vhost",
    # "mod_evhost",
    # "mod_userdir",
    # "mod_cgi",
    "mod_compress",
    # "mod_ssi",
    # "mod_usertrack",
    # "mod_expire",
    # "mod_secdownload",
    # "mod_rrdtool",
    "mod_accesslog" )
    ## a static document-root, for virtual-hosting take look at the
    ## server.virtual-* options
    server.document-root = "/home/lighttpd/html/"
    ## where to send error-messages to
    server.errorlog = "/var/log/lighttpd/error.log"
    # files to check for if .../ is requested
    index-file.names = ( "index.php", "index.html",
    "index.htm", "default.htm" )
    ## set the event-handler (read the performance section in the manual)
    # server.event-handler = "freebsd-kqueue" # needed on OS X
    # mimetype mapping
    mimetype.assign = (
    ".pdf" => "application/pdf",
    ".sig" => "application/pgp-signature",
    ".spl" => "application/futuresplash",
    ".class" => "application/octet-stream",
    ".ps" => "application/postscript",
    ".torrent" => "application/x-bittorrent",
    ".dvi" => "application/x-dvi",
    ".gz" => "application/x-gzip",
    ".pac" => "application/x-ns-proxy-autoconfig",
    ".swf" => "application/x-shockwave-flash",
    ".tar.gz" => "application/x-tgz",
    ".tgz" => "application/x-tgz",
    ".tar" => "application/x-tar",
    ".zip" => "application/zip",
    ".mp3" => "audio/mpeg",
    ".m3u" => "audio/x-mpegurl",
    ".wma" => "audio/x-ms-wma",
    ".wax" => "audio/x-ms-wax",
    ".ogg" => "application/ogg",
    ".wav" => "audio/x-wav",
    ".gif" => "image/gif",
    ".jar" => "application/x-java-archive",
    ".jpg" => "image/jpeg",
    ".jpeg" => "image/jpeg",
    ".png" => "image/png",
    ".xbm" => "image/x-xbitmap",
    ".xpm" => "image/x-xpixmap",
    ".xwd" => "image/x-xwindowdump",
    ".css" => "text/css",
    ".html" => "text/html",
    ".htm" => "text/html",
    ".js" => "text/javascript",
    ".asc" => "text/plain",
    ".c" => "text/plain",
    ".cpp" => "text/plain",
    ".log" => "text/plain",
    ".conf" => "text/plain",
    ".text" => "text/plain",
    ".txt" => "text/plain",
    ".dtd" => "text/xml",
    ".xml" => "text/xml",
    ".mpeg" => "video/mpeg",
    ".mpg" => "video/mpeg",
    ".mov" => "video/quicktime",
    ".qt" => "video/quicktime",
    ".avi" => "video/x-msvideo",
    ".asf" => "video/x-ms-asf",
    ".asx" => "video/x-ms-asf",
    ".wmv" => "video/x-ms-wmv",
    ".bz2" => "application/x-bzip",
    ".tbz" => "application/x-bzip-compressed-tar",
    ".tar.bz2" => "application/x-bzip-compressed-tar",
    # default mime type
    "" => "application/octet-stream",
    # Use the "Content-Type" extended attribute to obtain mime type if possible
    #mimetype.use-xattr = "enable"
    ## send a different Server: header
    ## be nice and keep it at lighttpd
    # server.tag = "lighttpd"
    #### accesslog module
    accesslog.filename = "/var/log/lighttpd/access.log"
    ## deny access the file-extensions
    # ~ is for backupfiles from vi, emacs, joe, ...
    # .inc is often used for code includes which should in general not be part
    # of the document-root
    url.access-deny = ( "~", ".inc" )
    $HTTP["url"] =~ "\.pdf$" {
    server.range-requests = "disable"
    # which extensions should not be handle via static-file transfer
    # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi
    static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" )
    ######### Options that are good to be but not neccesary to be changed #######
    ## bind to port (default: 80)
    #server.port = 81
    ## bind to localhost (default: all interfaces)
    #server.bind = "127.0.0.1"
    ## error-handler for status 404
    #server.error-handler-404 = "/error-handler.html"
    #server.error-handler-404 = "/error-handler.php"
    ## to help the rc.scripts
    server.pid-file = "/var/run/lighttpd.pid"
    ###### virtual hosts
    ## If you want name-based virtual hosting add the next three settings and load
    ## mod_simple_vhost
    ## document-root =
    ## virtual-server-root + virtual-server-default-host + virtual-server-docroot
    ## or
    ## virtual-server-root + http-host + virtual-server-docroot
    #simple-vhost.server-root = "/home/lighttpd/vhosts/"
    #simple-vhost.default-host = "www.example.org"
    #simple-vhost.document-root = "/htdocs/"
    ## Format: <errorfile-prefix><status-code>.html
    ## -> ..../status-404.html for 'File not found'
    #server.errorfile-prefix = "/usr/share/lighttpd/errors/status-"
    #server.errorfile-prefix = "/srv/www/errors/status-"
    ## virtual directory listings
    #dir-listing.activate = "enable"
    ## enable debugging
    #debug.log-request-header = "enable"
    #debug.log-response-header = "enable"
    #debug.log-request-handling = "enable"
    #debug.log-file-not-found = "enable"
    ### only root can use these options
    # chroot() to directory (default: no chroot() )
    #server.chroot = "/"
    ## change uid to <uid> (default: don't care)
    ## !!!! IF YOU CHANGE THE UID OR GROUPID apply the changes to /etc/logrotate.conf as well !!!
    server.username = "lighttpd"
    ## change uid to <uid> (default: don't care)
    server.groupname = "lighttpd"
    #### compress module
    compress.cache-dir = "/home/lighttpd/cache/"
    compress.filetype = ("text/plain", "text/html")
    #### proxy module
    ## read proxy.txt for more info
    #proxy.server = ( ".php" =>
    # ( "localhost" =>
    # "host" => "192.168.0.101",
    # "port" => 80
    #### fastcgi module
    ## read fastcgi.txt for more info
    ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini
    fastcgi.server = ( ".php" =>
    ( "localhost" =>
    "socket" => "/var/run/lighttpd/php-fastcgi.socket",
    "bin-path" => "/usr/bin/php-cgi"
    #### CGI module
    #cgi.assign = ( ".pl" => "/usr/bin/perl",
    # ".cgi" => "/usr/bin/perl" )
    #### SSL engine
    #$SERVER["socket"] == "0.0.0.0:443" {
    # ssl.engine = "enable"
    # ssl.pemfile = "/home/lighttpd/ssl/server.pem"
    # server.errorlog = "/var/log/lighttpd/error-ssl.log"
    # accesslog.filename = "/var/log/lighttpd/access-ssl.log"
    # server.document-root = "/home/lighttpd/html-ssl"
    #### status module
    #status.status-url = "/server-status"
    #status.config-url = "/server-config"
    #### auth module
    ## read authentication.txt for more info
    #auth.backend = "plain"
    #auth.backend.plain.userfile = "lighttpd.user"
    #auth.backend.plain.groupfile = "lighttpd.group"
    #auth.backend.ldap.hostname = "localhost"
    #auth.backend.ldap.base-dn = "dc=my-domain,dc=com"
    #auth.backend.ldap.filter = "(uid=$)"
    #auth.require = ( "/server-status" =>
    # "method" => "digest",
    # "realm" => "download archiv",
    # "require" => "user=jan"
    # "/server-config" =>
    # "method" => "digest",
    # "realm" => "download archiv",
    # "require" => "valid-user"
    #### url handling modules (rewrite, redirect, access)
    #url.rewrite = ( "^/$" => "/server-status" )
    #url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" )
    #### both rewrite/redirect support back reference to regex conditional using %n
    #$HTTP["host"] =~ "^www\.(.*)" {
    # url.redirect = ( "^/(.*)" => "http://%1/$1" )
    # define a pattern for the host url finding
    # %% => % sign
    # %0 => domain name + tld
    # %1 => tld
    # %2 => domain name without tld
    # %3 => subdomain 1 name
    # %4 => subdomain 2 name
    #evhost.path-pattern = "/home/lighttpd/vhosts/%3/htdocs/"
    #### expire module
    #expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "access plus 1 seconds 2 minutes")
    #### ssi
    #ssi.extension = ( ".shtml" )
    #### rrdtool
    #rrdtool.binary = "/usr/bin/rrdtool"
    #rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd"
    #### setenv
    #setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" )
    #setenv.add-response-header = ( "X-Secret-Message" => "42" )
    ## for mod_trigger_b4_dl
    # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db"
    # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" )
    # trigger-before-download.trigger-url = "^/trigger/"
    # trigger-before-download.download-url = "^/download/"
    # trigger-before-download.deny-url = "http://127.0.0.1/index.html"
    # trigger-before-download.trigger-timeout = 10
    ## for mod_cml
    ## don't forget to add index.cml to server.indexfiles
    # cml.extension = ".cml"
    # cml.memcache-hosts = ( "127.0.0.1:11211" )
    #### variable usage:
    ## variable name without "." is auto prefixed by "var." and becomes "var.bar"
    #bar = 1
    #var.mystring = "foo"
    ## integer add
    #bar += 1
    ## string concat, with integer cast as string, result: "www.foo1.com"
    #server.name = "www." + mystring + var.bar + ".com"
    ## array merge
    #index-file.names = (foo + ".php") + index-file.names
    #index-file.names += (foo + ".php")
    #### include
    #include /etc/lighttpd/lighttpd-inc.conf
    ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf"
    #include "lighttpd-inc.conf"
    #### include_shell
    #include_shell "echo var.a=1"
    ## the above is same as:
    #var.a=1
    DAEMONS=(syslog-ng iptables network netfs crond sshd lighttpd)
    Did I do anything wrong, is this how it's supposed to work? I googled the error from lighttpd error.log and the only useful information I could find was in polish i think, and unfortunately, i don't speak polish.
    -Zack
    Last edited by Sjoden (2008-05-28 22:00:37)

    ls -l /var/run/lighttpd/
    And how are you spawning the php instances? I don't see that in the daemons array anywhere.
    EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
    You will note that with pre-spawned information, the config looks different[1].
    You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
    [1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change"

  • Installing Coldfusion 9 and Apache 2.2 on Windows Server 2008 R2 Standard

    I'm having issues getting ColdFusion 9 working with Apache 2.2 on Windows Server 2008 R2 Standard.
    The server is brand new and it's a fresh install of Apache and ColdFusion 9.
    Having installed Apache, I tested the web server and it was working fine, so I proceeded to install ColdFusion 9. I attempted to restart the Apache server through the Apache Service monitor, only to get the error dialog box 'The requested operation has failed'.
    On closer examination of the Windows error log, I saw the following error:
    The Apache service named  reported the following error: >>>
    httpd.exe: Syntax error on line 488 of C:/Program Files (x86)/Apache Software Foundation/Apache2.2/conf/httpd.conf: Cannot load C:/ColdFusion9/runtime/lib/wsconfig/1/mod_jrun22.so into server: The Apache service named is not a valid Win32 application.
    I updated the ColdFusion installation to 9.0.1 in case there was an issue with version 9.0 and Apache. Still no joy.
    After a bit of research, I thought perhaps there was an issue with the mod_jrun22.so file (since when I commented out the reference to that file from the Apache config file, the Apache HTTP server started without any problem). I tried replacing the mod_jrun22.so with the 32 bit version (extracted from the wsconfig.jar file), but that made no difference either.
    I have tried a number of things. I have run wsconfig and uninstalled all web server connectors and then re-created them.
    I have to use Apache and IIS is not an option (I use rewrite rules extensively in an existing live installation and have many sites set up in a vhosts file), so please - no suggestions to use IIS instead.
    The system requirements on http://www.adobe.com/sea/products/coldfusion/systemreqs/ state that Coldfusion 9 will work with Apache 2.2.17 and later on Windows 64 bit, so why am I having issues with a brand-new installation on a 'virgin' server?
    Any help would be much appreciated. I have spent hours trawling the Web for solutions.

    I missed an important detail in my opening post. My Coldfusion 9 version is 64 bit - not 32.
    OK. Simple solution to this. I'll put it here for other peoples' reference.
    To cut a long story short, after phoning Adobe support this morning I was told that you can't run a 64 bit version of ColdFusion with a 32 bit web server. In essence, the web server software and the ColdFusion server software must be the same - either 32 or 64 bit.
    Apache is only officially released as a 32 bit version, but there is a 64 bit unofficial version available from http://www.blackdot.be/?inc=apache/binaries, so I downloaded that and installed it, based on the instructions at http://www.elxis.org/guides/developers-guides/64bit-apache-php-mysql-windows.html.
    Once I'd installed the 64bit version of Apache, the installation of Coldfusion 9 64 bit went smoothly and all appears to be working just fine now (well, I can get to the ColdFusion Administrator page and I have successfully updated the server software to ColdFusion 9.0.1).
    The fact that you can't mix different 'bit' versions of software in this way may be obvious, but it wasn't obvious to me. Having been an early adopter of a 64 bit version of Vista on my own PC, I never experienced these kind of problems before. Software installed itself into the corresponding locations on my PC without any problem and just worked. This is the first time I've run into this problem.
    Unfortunately, there doesn't appear to be any information regarding this very important requirement on the system requirements pages, so I suggested to the support engineer that he may want to make the recommendation that the page is amended to clarify the situation: e.g.
    IMPORTANT: 64 bit versions of ColdFusion require 64 bit versions of web server software to function. You can not mix 32 bit and 64 bit versions of web servers and ColdFusion server.
    Hope this helps someone else out.

  • PHP and Apache, Bah Humbug

    Setting up PHP and Apache, I was following this: http://developer.apple.com/mac/articles/internet/phpeasyway.html
    I did the step to turn on "web sharing", and the "your computers website" link opened up the local page no problem. When I copy and pasted the content in "enabling PHP in apache" to terminal, I thought it worked... but now neither of the links work. Both say something like "Firefox can't establish a connection to the server at....". Any ideas?

    Safari says this:
    Safari can’t connect to the server.
    Safari can’t open the page “http://192.168.1.100/” because Safari can’t connect to the server “192.168.1.100”.
    I tried restarting apache with "sudo /usr/sbin/apachectl restart", but no luck, still get same messages in browsers.
    The computer's site (not personal) DID work when I started following the tutorial, but I only got half way through. I believe it stopped working when I copy/pasted the part from the tutorial. Any ideas? Can I completely reboot the process somehow?

  • PHP 5.0.4, php apps and zip file problems

    I use various opensource web apps that allow for files to be uploaded in zip format. The app then unzips the files and does what it needs to do with them. ie: Gallery2 uploading photos that are zipped up and placing the enclosed photos into the gallery.
    Anyway, this was working very well with the base install of OS X Server's PHP4.? and Apache 1.4.3
    I upgraded to PHP 5.0.4 using Entropy PHP (recommended by another OS X Server admin). Anyway, I lost the ability to handle the zip files. I am unsure what to look for.
    phpinfo() shows the following about compressed files:
    Configure Command
    './configure' '--prefix=/usr/local/php5' '--with-config-file-path=/usr/local/php5/lib' '--with-apxs' '--with-iconv' '--with-openssl=/usr' '--with-zlib=/usr' '--with-mysql=/Users/marc/svn/entropy/php-module/src/mysql-standard-*' '--with-mysqli=/usr/local/mysql/bin/mysql_config' '--with-libxml-dir=/usr/local/php5' '--with-xsl=/usr/local/php5' '--with-pdflib=/usr/local/php5' '--with-pgsql=/Users/marc/svn/entropy/php-module/build/postgresql-build' '--with-gd' '--with-jpeg-dir=/usr/local/php5' '--with-png-dir=/usr/local/php5' '--with-zlib-dir=/usr' '--with-freetype-dir=/usr/local/php5' '--with-t1lib=/usr/local/php5' '--with-imap=../imap-2002d' '--with-imap-ssl=/usr' '--with-gettext=/usr/local/php5' '--with-ming=/Users/marc/svn/entropy/php-module/build/ming-build' '--with-ldap' '--with-mime-magic=/usr/local/php5/etc/magic.mime' '--with-iodbc=/usr' '--with-xmlrpc' '--with-expat-dir=/usr/local/php5' '--with-iconv-dir=/usr' '--with-curl=/usr/local/php5' '--enable-exif' '--enable-wddx' '--enable-soap' '--enable-sqlite-utf8' '--enable-ftp' '--enable-sockets' '--enable-dbx' '--enable-dbase' '--enable-mbstring' '--enable-calendar' '--with-bz2=/usr' '--with-mcrypt=/usr/local/php5' '--with-mhash=/usr/local/php5' '--with-mssql=/usr/local/php5' '--with-fbsql=/Users/marc/svn/entropy/php-module/build/frontbase-build/Library/ FrontBase' '--enable-openbase_module'
    Registered PHP Streams
    php, file, http, ftp, compress.bzip2, compress.zlib, https, ftps
    BZip2 Support Enabled
    BZip2 Version 1.0.2, 30-Dec-2001

    I wish I could be as optimistic about your configuration, you have/had more than two issues, even after building a PHP that would work for you it had to be reconfigured to obtain optimal performance.
    I noticed other errors in your logs but since they weren't specifically related to your issue with zip or PHP running properly I place a low priority on them and ignored them.
    I eventually found the build issue with the entrophy PHP however Mark wasn't interested in the fix since it basically performed the majority of the tasks that were expected and everything else was considered experimental with no real support provided.
    You did get a better PHP built in the ADE (Apple Developer Environment) targeted specifically for your CPU (although they are universal binaries) and I included some modules I wrote myself that provide some (IMHO) key functionality for a production web service like scanning uploaded files for viruses and the ability to generate RRDTool graphs natively without slowing the process down by having to rely on external resources.
    While I have thoroughly tested the modules I wrote, I have not had the time (or the help) to write proper documentation for them so I might later provide some sample PHP scripts since they are fairly simple to implement.
    The biggest problem I saw was that you had a lot of nice toys but none of them were designed to work smoothly together and the entrophy PHP is a good alternative for someone who needs more than what apple provides but isn't capable of generating something that integrates well in the environment.
    Also to note, the entrophy (or Server Logistics) PHP is an all-purpose/general-purpose solution and isn't ever going to be optimal for any specific architecture due to the build process which is why the one I provided works significantly better, it was built specifically for both architectures individually then combined into a single binary giving you the ultimate performer for either architecture without sacraficing performance or degrading functionality.
    I tend to use as much Apple provided software as I can since it makes no sense to me to build and install any software that is already available and built specifically for the environment other than to waste disk space, freetype is a good example, any that is provided will never include the same features and functionality as the apple provided installation yet all PHP makers seem to build the basic bare-bones freetype and build their PHP off of it expecting to achieve the same feature-rich functionality which it clearly isn't capable of.
    They also include a lot of features which are never used and I have removed and/or substituted some of these in an attempt to provide a more usefull set of features and functionality and I include a very complete pear installation which also contains just about every feature and functionality you would ever require without providing anything that that would be considered fluff.
    I've been watching the performance of the installation for a couple of days now and I'm more than satified that it's a solid performer for you so smile and enjoy, santa was nice to you this year.

  • Upgrading to PHP 5 on Tiger and Apache 1.3

    I need a little help with configuring php on my local server. I love XHTML/CSS and a bit of php, WordPress, and Rails - but I'm terrible at this server stuff. I'm petrified of screwing my configuration.
    I'm running everything from the default OS X Apache server (I'm on Tiger OS X 10.4.10). I prefer using the internal server to all-in-one apps like MAMP and Locomotive. I have phpMyAdmin v2.10.2, MySQL v5.0.24a, and I think I'm running php 4.4.7 (typing php -v whilst in my document root in terminal returns version 4.4.7).
    I now want to use the latest version of php. However, I can't remember if I upgraded php when I was installing MySQL etc. If not, is it possible that I installed the latest version, and I'm just not using at the moment (which could be why terminal is saying it's version 4.4.7)? Is there anyway to check for dormant versions of php or to switch over to running a different version?
    If I don't have it, I need to install it. Is there an easy way of doing this via an installer? Is there anything I need to watch-out for whilst I'm attempting this feat?
    Also, does Leopard bring many advancements on the server front, i.e. Apache 2, php 5, MySQL etc, which might save me some hassle if I just go through the inevitable OS upgrade sooner rather than later?
    Any help is much appreciated.

    I now want to use the latest version of php. However, I can't remember if I
    upgraded php when I was installing MySQL etc. If not, is it possible that I
    installed the latest version, and I'm just not using at the moment (which could
    be why terminal is saying it's version 4.4.7)? Is there anyway to check for
    dormant versions of php or to switch over to running a different version?
    Well you could try this in terminal:
    <pre style="font-family: monospaced;">locate php</pre>
    It should show you nearly everything associated with php. As far as what the php version command lists this only picks up the CLI version of php not necessarily whats running on the web server. throw a php file in your webroot with the following code in it to see what the server is using:
    <pre style="font-family: monospaced;"><?php phpinfo(); ?></pre>
    That will give you the lowdown on what Apache is configured with. this is goign to depend on what mod_php is being used.
    Generally i wouldnt upgrade anything that lives in the system as you never know if it might get overwritten or updated when a system update comes down from apple. A better practice is to install the version you want to use to /usr/local/<dirname> so that the installations are isolated and manageable.
    If I don't have it, I need to install it. Is there an easy way of doing this via
    an installer? Is there anything I need to watch-out for whilst I'm attempting
    this feat?
    I generally use the php packages from www.entropy.ch just so i dont have to bother with compiling. My versions of Ruby, Apache 2.0.x and Apache 2.2.x i compiled myself, along with an upgraded version of Python and alot of other libraries.
    Then you can jsut make some changes to configuration files to use the versions you want. However if you use the entropy.ch packages of php as i suggested the installer takes care of the configuration changes for you. Jsut make sure you grab the one for the proper version of apache youre going to be using it with.
    Additionally you could always get Mac/DarwinPorts - whatever its called now... this is a package manager like apt-get or yum under linux. It fetaches the package for you from a repository, and installs it. I dont use these because they use a different dir structure than standard Darwin - ie. the create the /opt folder and install under this. I dont really like that so i dont use them - but that isnt going to cause you any problems, its jsut a preference thing.
    Also, does Leopard bring many advancements on the server front, i.e. Apache 2,
    php 5, MySQL etc, which might save me some hassle if I just go through the
    inevitable OS upgrade sooner rather than later?
    I know it comes with apache 2. I think it may also come with php 5.1.6 (5.2.x is avialable though).. not sure about MySQL at all...

  • Sessions wth WL8.1 and Apache Plug In

    We are currently facing problems with session failover with WL 8.1(SP4) and Apache(2.0.54) plugin.
              Just wanted to know if session replication works across different subnets.
              We have Managed Servers running on different subnets which are part of a single cluster. Session replication works (tested with the sample InMemRepClient application supplied with weblogic) when machines within the subnet are up and fails when machines within the same subnet are down, although machines are up in a different subnet.
              Does weblogic allow session replpication to work across different clusters with different subnets?
              Is this a limitaion with WL8.1 and is this session replication work across subnets with WL9?
              Thanks.

    I believe that we recommend having all the managed srevers in a single subnet. However, even if the cluster spans more than one subnet, you can configure the Multicast Time-To-Live (TTL) parameter for the cluster and it will work fine. Please have a look on following pieces of documentation:
              "If Your Cluster Spans Multiple Subnets in a WAN" on http://e-docs.bea.com/wls/docs81/cluster/features.html
              And
              "Configure Multicast Time-To-Live (TTL)" on http://e-docs.bea.com/wls/docs81/cluster/setup.html#732108
              Hope this helps.

  • WLS 6.1 SP2 and Apache 1.3.26 Windows NT/2000

    Hi,
    Is there an Apache plugin available for WLS 6.1 (SP2) and Apache 1.3.26 running
    on Windows NT/2000?
    thanks

    I've solved my own problem. I learned that there was a sp4 (let alone a
    sp3) for WLS. Installed that and the problem went away. Sorry for the
    noise.
    -Phil
    Philip Bower <[email protected]> wrote in
    news:[email protected]:
    When I try to deploy the struts-example.war or if I add the struts.jar
    to any other web app I've created, I get this error when I start WLS
    and it tries to deploy that war.
    java.lang.StringIndexOutOfBoundsException
    at weblogic.servlet.internal.WebAppHelper.resolveManifestName
    (WebAppHelper.java:469)
    I'm using version 1.1b3 of struts. I'm having no problems with
    version 1.0.2 of struts.
    I'm guessing its complaining about the manifest file in struts.jar,
    but I don't understand why.
    Here's my version info and the stack trace (my web app is called
    findme in this example). Thanks in advance.
    -Phil
    Server BuildWebLogic Server 6.1 SP2 12/18/2001 11:13:46 #154529
    All Server Product VersionsWebLogic Server 6.1 SP2 12/18/2001
    11:13:46 #154529 WebLogic XML Module 6.1 SP2 12/18/2001 11:28:02
    #154529
    <Feb 11, 2003 7:45:25 AM EST> <Error> <J2EE> <Error deploying
    application findme: Could not load findme>
    <Feb 11, 2003 7:45:25 AM EST> <Error> <Management> <ApplicationManager
    starting Config caught throwable
    java.lang.reflect.UndeclaredThrowableException:
    java.lang.StringIndexOutOfBoundsException: String index out of range:
    -1
    at java.lang.String.substring(String.java:1525)
    at
    weblogic.servlet.internal.WebAppHelper.resolveManifestName(WebAppHelper
    .jav a:469)
    at
    weblogic.servlet.internal.WebAppHelper.extractClassFiles(WebAppHelper.j
    ava: 234)
    at
    weblogic.servlet.internal.WebAppServletContext.extractClassFiles(WebApp
    Serv letContext.java:3407)
    at
    weblogic.servlet.internal.WebAppServletContext.setDocroot(WebAppServlet
    Cont ext.java:3376)
    at
    weblogic.servlet.internal.WebAppServletContext.init(WebAppServletContex
    t.ja va:862)

  • WLS 6.1 SP3 and apache plugin

    Hello,
    I have WLS 6.1 SP3 and apache 1.3.26 installed on solaris 8.
    I enabled the weblogic Weblogic Plug-In Enabled for my wls server and
    then I configured my apache server like the following:
    1) I used mod_wl.so that comes with wls under
    \bea\wlserver6.1\lib\solaris
    2) Then I loaded that module using APACHE_HOME/bin/apxs -i -a -n
    weblogic mod_wl.so
    When I load the module I get the following:
    [Thu Jan 15 10:05:53 2004] [warn] Loaded DSO libexec/mod_wl.so uses
    plain Apache 1.3 API, this module might crash under EAPI!
    please recompile it with -DEAPI)
    /usr/apache/bin/apachectl start: httpd started
    I don't understand that message
    3) The following lines were added to httpd.conf:
    LoadModule weblogic_module libexec/mod_wl.so
    AddModule mod_weblogic.c
    4) Then I added the following to the httpd.conf:
    <IfModule mod_weblogic.c>
    WebLogicHost 10.1.10.205(my weblogic IP)
    WebLogicPort 7020 (my weblogic port)
    FileCaching On
    MatchExpression *.jsp
    </IfModule>
    The problem is that the apache server is not able to redirect the jsp
    calls to the WLS server and I'm always getting "The page cannot be
    displayed"
    Any information that might guide me to solve this problem is appreciated
    Itani Mohamed
    SoftSolutions
    Tel: +961.1.90.11.70 ext:141
    Fax: +961.1.90.11.75
    www.softsolutions.fr

    Itani,
    Please try the mod-wl-ssl.so module shipped with weblogic, as this module is compiled with -DEAPI flag

Maybe you are looking for

  • How to disable the auto eject of a failing HD

    My kids HD just started to fail.  Apple replaced it this AM, however my kid's TM backup is about 5 months old.  I am trying to recover the data from the old disk. She put the old disk into an enclosure and connected it to her MBP.  As I try to copy a

  • Adobe Reader 11 (11.0.02)

    My computer apparently has Adobe Reader 11 (11.0.02) installed but I am unable to open PDFs. I am also unable to remove or change it and when I try I get a message saying, "This patch package could not be opened. Verify that the patch exists and that

  • GNU Screen Scroll problem

    Hello everyone, I'm a new member in the Arch community and I'm enjoying myself a lot by using this distribution. the problem I'm having is that I can't seem to get the mouse scrollwheel to scroll upwards in GNU Screen running in a Terminator emulator

  • Swatches panel and JPEG Export filter did not install

    Just downloaded and installed CS6 (call me cheap) on my Mavericks O/S. When I tried to open InDesign I was told that the JPEG File Exporter plug in and the Swatches plug in had not been installed. I have tried the workarounds suggested by Adobe (inst

  • Deleting Multiple Hard Drives Quickly

    Find one of these and throw them in... https://honestnetworker.wordpress.com/2015/06/28/when-your-favorite-startup-is-acquired-by-cisco/ In all actuality, physical destruction is the easiest/most fun method of mitigating the risk. Drill press, hydrau