Like is not working with substr...

Hello,
I am trying to do
FOR i IN (SELECT grp.group_id
               FROM ems.groups grp, ems.groups_loc gl, ems.location loc
              WHERE grp.group_id = gl.group_id
                AND loc.loc_id = gl.loc_id
                AND gl.loc_id = i_loc_id
                AND (UPPER(group_desc) LIKE (UPPER(SUBSTR (location_desc, 3,INSTR(SUBSTR(location_desc,3,LENGTH(location_desc)),',')-1)) || ' IT')
                 OR UPPER(group_desc) LIKE (UPPER(SUBSTR (location_desc, 3,INSTR(SUBSTR(location_desc,3,LENGTH(location_desc)),',')-1)) || ' FACILITIES' ))
              ) LOOP
Here there is data with UPPER(SUBSTR (location_desc, 3,INSTR(SUBSTR(location_desc,3,LENGTH(location_desc)),',')-1)) || ' IT') as well as (UPPER(SUBSTR (location_desc, 3,INSTR(SUBSTR(location_desc,3,LENGTH(location_desc)),',')-1)) || ' FACILITIES' )),
But it seems to be 'LIKE' is not working.
Can please anybody help me with this problem.
Thanks.

Sorry, for insufficient information.
here i have location desc as 39 Herndon, VA, 11 Jacksonville, FL, 48 Pittsburgh, PA. From these description i have to get Herndon, Jacksonville, Pittsburgh and then check group_desc = 'HERNDONIT' OR 'HERNDON FACILITIES'.
I am trying with,
(UPPER(group_desc) LIKE (UPPER(SUBSTR (location_desc, 3,INSTR(SUBSTR(location_desc,3,LENGTH(location_desc)),',')-1)) || ' IT'|| '%')
OR UPPER(group_desc) LIKE (UPPER(SUBSTR (location_desc, 3,INSTR(SUBSTR(location_desc,3,LENGTH(location_desc)),',')-1)) || ' FACILITIES' || '%' ))
But its not working correctly. Eventhough there is data i am not getting any row return.
Thanks,
Gayatri.

Similar Messages

I would like to go back to the version of Firefox before I added the new Firefox 4...most of the addons I like do not work with 4...how do I go back?

The addons I use a lot are not compatible with Firefox 4...if I had known, I would have kept the older version....having a real hard time getting the old one back....The mozilla folder in my Programs has version 1.9 listed which is crazy...I had at least version 3.5 This is getting pretty frustrating...wish I had never switched...any help would be appreciated.....

To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imp

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks

I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise.

Why is elements 12 not working with OS 10 yosemite Editing tools aren't working like they used to.????

Can someone tell my why Elements 12 photo editing tools wont work with OS 10 Yosemite?

duplicate, see:
why is elements 12 not working with OS 10 yosemite Editing tools aren't working like they used to.????

Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site i'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9.

Silverlight 5 WebBrowser Control - Is the SL5 WebBrowser control is set to work in IE7 mode only? I have a 3rd party web site I'm hosting and now they will not work with IE 7 Compatibility mode. Looks like this control can't detect I'm setup for IE 9. I'm
running IE 11 with registry hack for IE 9. I think the SL5 webbrowser control is set to work only in IE 7. can some one verify this or tell me how to set the WebBrowser control up to run either IE8, 9, 10 or 11? I have same issue with machines running IE 8
and above. This Silverlight 5 application is running out of browser with the elevated privileges (hack) and at test certificates install in proper stores. This application has been running for 2.5 years. Vender switch on some changes a couple days ago that
broke this application. Help!!

Hi,
It seems there is nothing to do with IE mode.
Please make sure your link still can be accessed.
The WebBrowser displays HTML content in applications running in a Silverlight 4 or later out-of-browser applications or in Silverlight 5 in-browser trusted applications only.
For more infromation,please check link below:
http://msdn.microsoft.com/en-us/library/system.windows.controls.webbrowser(v=vs.95).aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Caller ID not working with Nokia 6600?

I have a T-Mobile (US) Nokia 6600, and I can't seem to get address book to display incoming SMS or the caller ID of incoming calls. I've successfully paired the phone via bluetooth, and I can make address book dial the phone and send an sms. I can sync via iSync, use my phone as a modem, etc. etc.
But regardless of what settings I tweak, I can't seem to get Address Book to show a bezel of any kind on incoming calls - not even an 'Unknown Caller' message! Am I missing something obvious? Third party apps like BluePhoneElite work just fine, so I'm pretty sure it's something wrong with Address Book...
15" Aluminum Powerbook 1.5 GHz Mac OS X (10.4.5)

mdcdsc wrote:
My caller ID does not work with the new ap either. I don't like the new ap at all. The old one was beautiful. Now my email is very hard to see, so much that I will just use the Apple email that comes with my IPOD. The caller ID was my favorite thing with the old ap. and now it doesn't work. I have followed the instructions and turned everything on, but it just does not work.
The Caller ID issue was due to an outage. It should be resolved anytime soon. Can yu log out and log back in. Go to app settings and in notifications and turn CAller ID off and on.
On email - what do you mean 'email is very hard to see' ? I would like to pass on this feedback to the team.

My work computer runs Outlook 2003, which I know will not work with the iCloud, so I hard sync. But then the new info on my iPhone does not backup to iCloud. Is there a solution?

I have a Macbook and iPhone and like to back up to iCloud. However, my work computer runs Outlook 2003, which I know will not work with the iCloud. The company has no plans to update anytime soon. Since the calendar and contact list on my office computer are my primay ones, I hard sync through iTunes. The problem is that any data synced from Outlook 2003 to the iPhone from iTunes does NOT later backup to iCloud. Is there a solution?

I have the same problem with Outlook 2003 and Win XP which the multinational organisation I work for standardises on and will probably stay with forever!

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

ITunes 12.1.1 does NOT work with Windows - Fix??

Hi everyone,
I had issue after issue with the latest iTunes update (12.1.1) not working on my windows 7. It simply would not lunch when clicking on the shortcut to open.
After a fair bit of searching I found this alternative version which seemed to do the trick and now it works:
iTunes 12.1.1.4 for Windows (64-bit - for older video cards) - iTunes64Setup.exe(2015-02-18)

The "for older video cards" installer - which, like most prior "64 bit" versions of iTunes, is actually a 32 bit application with a 64 bit installer - may be a useful fallback if the full 64 bit version does not install or run correctly. Although 12.1.1.4 is a major improvement over 12.1.0.71, there are clearly still some lurking incompatibilities with some 64 bit Windows systems/components. It is, however, a little misleading to say that "iTunes 12.1.1 does NOT work with Windows" - in many cases it works fine without switching to the alternative version. I have the full 64-bit version of 12.1.1.4 running on three systems - two Windows 7 and one Windows 8.1 - no issues with either installation or operation on any of them.

MBP CD2 DVI to VGA not working with projector

I am having issues getting the MBP to recognize a DELL 2300 projector through a DVI to VGA apple cable.
A few months ago there were posts about this, but no solutions. The problem seems to be with the 'INTEL' side of things, as the same projector with the same DVI to VGA apple cable works on an older G4 tower running 10.4.9. The projector also works on an old G4 iBook with it's version of a VGA adapter. To make things more confusing, a DVI to Video apple cable works with the DELL 2300 on my new MBP C2D-but produces a terrible quality picture. Mysteriously, my previous 1st generation MBP CD worked with the DELL 2300 via a DVI to VGA apple cable (but I'm not sure which OS was out at the time 10.4.8?)
My new MBP CD2 definately recognizes the projector through the DVI to VGA adapter, but the projector doesn't recognize the video signal from the computer. It is DEFINATELY the MBP (or universal drivers), as I have checked the DVI to VGA dongle (works), have checked the projector (works with an ibook running 10.4.8 OSX with VGA dongle), have changed resolution settings before and after connecting, have restarted computer, have tested various orders of connecting the projector and cables. STINK! (I also have TWO DVI to VGA adapters, so it is not a bad adapter). I have also played with exchanging various plist files from older universal versions of 10.4.8 that worked with the projector-no help.
As I stated, the projector will work (in horrible quality) with a DVI to Video dongle. Why it will not work with the DVI to VGA dongle is a mystery and annoying I would hope that a newer MBP CD2 would be plug and play (like my previous MBP CD and an old G4 tower and an old iBook G4...but no).
Any ideas, any help, any answers?

Here are the actors in our play today
1. MacBookPro A. (my system a CD2 2.16 with OSX 10.4.9)
2. MacBookPro B. (my friends system a CD2 2.16 with OSX 10.4.9)
3. an iBook (my friends 1.07 GHz G4 with 10.4.8 and a VGA adapter)
4. DELL 2300 MP projector
Plugged in DVI to VGA adapter to the virgin MacBookPro B (never had the projector plugged into it before) Dell projector shows that it recognizes an analog RGB 800X600 signal from MBP B. It projects a beautiful desktop. All is well for a moment.
In Display preferences we see for the MBP B
Color LCD, Display: 800X600 stretched, Colors: Millions, Refresh Rate: N/A
VGA Display
Now, I unplug the DVI to VGA adapter and naturally MBP B readjusts to it's native resolution. Great.
Now I immediately plug back in the DVI to VGA adapter. The computer and the projector searches for signal with none found, while the computer shows no attempt at an automatic readjustment as above (800X600 stretched).
I try the 'detect display' option. It causes computer to stall for a second (as it searches) but it does not detect projector and does not readjust it's own resolution to 800X600 stretched as it did initially. F7 key does nothing.
This is a problem!
So, I shut down the projector. I unplug the projector's power source and waited 20 seconds. plugged it back in, started projector back up.
I shut down/restarted the MBP B.
I plug back in the DVI to VGA adapter into the MBP B. The MBP B screen flashes to all blue, but does not automatically change to 800X600 stretched (remains at native resolution and does not recognize an external monitor/projector)
Enter the iBook!
I plug the iBook's VGA adapter into the projector. The projector shows that it recognizes an analog RGB 1024X768 60Hz signal and projects desktop screen immediately. Plug and play!
iBook display prefs reveal:
Color LCD, 1024X768, colors: Millions, Refresh rate: N/A
Color tab: Generic RGB Profile
VGA display, 1024X768, colors: Millions,
Now. I unplug adapter from iBook, iBook readjusts to native display
plugged back in adapter to iBook, immediately recognizes and displays projected desktop.
Scene 2: The FREAKY thing!
Now, I immediately (after unplugging the adapter from the iBook) change adapters to the DVI to VGA adapter and plug the projector into the MacBookPro B, whallla! Back in business. (computer screen adjusted to 800X600, and projector recognized signal).
Now, what about my computer? I unplug from MBP B and plug into MacBookPro A, and NOTHING...the computer doesn't automatically adjust to a new resolution, and the projector doesn't recognize any signal from the computer.
Ahhhh Freak out! Now, I plugged adapter back into MacBookPro B, and now back to NOTHING. MBP B no longer recognizes projector or readjusts it's resolution. Was something somehow corrupted?
Now, I plugged iBook VGA adapter back in, and iBook once again with it's awesome G4 technology (or dated video drivers or something) recognizes the projector in an instant and projects the screen.
Now, logically I try again to immediately unplug the adapter from the iBook and switch adapters and plug back into MacBookPro B-it worked once right? But, sorry, NOT twice. The mystery deepens.
Well, I think, maybe it is because I didn't restart MacBookPro B before attempting the switcharoo from iBook to MacBookPro.
So, I plug back into iBook-projector. And the iBook works immediately again.
I restart MacBookPro B and plug in to the freshly restarted MBP B...HOUSTON WE HAVE LIFT OFF! The MacBookPro B recognizes the projector and the projector kindly displays the desktop.
Now what about MacBookPro A...Last time, when I did the switcharoo, it corrupted something to cause the MBP B not to work. Let's try it again. Will this plug-unplug-restart-switch adapters-immediatly plug in technique work...let's see. I restart MBP A, and plug DVI to VGA adapter in. Sorry. Same ol' no signals recognized. MacBookPro A not auto readjusting resolution, and does not list any projector in display prefs.
Let's get crazy and immediately plug the adapter into the MacBookPro B...it works-oh so logical...NOT! Why wasn't it corrupted this time by MBP A? MacBookPro B readjusts its screen to 800X600 stretched and projector immediately recognizes and projects desktop.
Now lets see if I can break it again as before. I unplug it from MacBookPro B and back into MacBook Pro B, knowing that this caused it to stop working previously. And...it still works-WHAT? I do it a third time. It still works on MacBookPro B.
So,
I plug it back into MacBookPro A...still nothing. Back to MacbookPro B works like a charm. This time it struggles a bit showing that initially it sees a signal from MacBookPro B of 1192X900 (i Think), then the MacBookPro B switches automatically to 800X600 and the projector works.
Wait..I see something amiss! I see in my MBP A menu bar an icon for Labtick which MBP B does not have. I shut down Labtick, plug back in the DVI to VGA adapter and 'Boom' the projector is recognized.
I unplug DVI to VGA adapter and plug back in to MBP A and 'Boom' the projector is recognized again...no it couldn't be!
Well, it is possible it couldn't be because, I shut down the projector, unplug it's power source, plug it back in. I plug it back into the recently working MBP A with Labtick not running, and sorry folks, now the projector doesn't work again. The MBP A does not readjust it's resolution, nor recognize a projector and the projector doesn't recognize the MBP A.
Let's try the projector in MBP B....same deal. Now it doesn't work. Same symptoms of MBP A.
Back to the good ol' iBook. Of course it works.
Now switching over directly to a restarted MBP B. -DOESN'T WORK (as it did using this technique previously)
Now switching over to MBP A- DOESN'T WORK.
As you can see, it is hard even with multiple computers to find a series of doing things that consistently makes the projector work.
Any thoughts, ideas, ways to diagnose? Thanks!

Macbook mini-DVI - DVI - HDMI not working with My 32" Vizio

Okay so my Macbook mini-DVI - DVI - HDMI is not working with My 32" Vizio. I've connected an 18 pin plus one slot DVI to HDMI cable to my 32" Vizio HDTV, this cable is connected to my macbook via a Mini-DVI to DVI cable, this one has 24 pins plus one slot on the DVI side. My Vizio display is blue, no signal, it reads. I'm wondering if the reason it's not picking up the display is the lack of pins on the DVI to HDMI or because I dont have any display options aside from screen size and color on my display menu. BTW I hit the detect display button and nothing happened.... I know I just wrote alot here but hopefully someone will read it and come to the rescue. thanks

Oops, I guess all I had to do was restart my macbook. I feel like an idiot.....all is well.

Layout adjustment not working with tables

Hi all
Why will layout adjustment not work with tables?
I am trying to re-format from A4 landscape to A4 portrait.
The text box containing the table will resize but not the table.
Any clues why this might be, I don't want to manually resize every table in the document.
Many thanks,
Rob

Thanks Jongware,
Having resized the table and got the little red ovals, I tried various things like changing the font size etc but the best workaround I found was to select the table and change the cell inset value to 0, this got rid of all red ovals and I didn't need to change the font size.
Cheers,
Rob

Applets not working with Java 1.7.0_51 in MII 14.0 SP4 Patch 5

Hi,
I'm currently evaluating the migration of our MII 12.0 developments to MII 14.
But I'm running in several issues just trying to use simple things like a SQL query template with an iGrid Display template in test mode.
Used versions are: MII 14.0 SP4 Patch 5 and on client side the latest Mozilla Firefox with Java 1.7.0_51
At first I always get a java security warning when the applet is being loaded about unsigned applications.
At second the applet itself is not running. It always shows "No data available" and the java console shows the following errors (iResult is the id of the applet):
iResult [ERROR] - Couldn't set query template: No Query Defined
iResult [ERROR] - Couldn't set display template: null
iResult [ERROR] - Couldn't set display template: null
Is this perhaps a general problem, that the MII applets are not working with Java 1.7.x versions?
If I call the same MII page from a client with Java 1.6.x it is working without errors.
Do you have some suggestions for me?
Regards Timo

please clear your JAVA Cache. that should solve the JRE issue. thanks

Modifer keys do not work with mouse in Illustrator

Below is a copy of a bug report I just submitted to Adobe. I don't suppose any users have run across this and found a solution or workaround?
I found someone else with this problem in an archived topic thread, but the only response that poor fellow got was an accusation of not following instructions (His problem wasn't user error, BTW).
Thanks
******BUG******
Concise problem statement:
Modifer keys do not work with mouse: For example, free transform or rotate behaviors that require "Click-Ctrl" .
Steps to reproduce bug:
1. select object
2. select free transform tool
3. left click (without releasing) a corner of the bounding box.
4. start dragging
5. press ctrl
Results:
object behaves as though the ctrl key was not pressed. i.e. the cursor does not change shape and the object scales rather than distorts.
Expected results: The cursor should change shape as the ctrl key is pressed and the object should distort rather than scale.
Additional information: This behavior is intermittent. Occasionally Illustrator recognizes the "Click-Ctrl" combination and behaves exactly as the help file predicts it will. The cursor changes shape and the object distorts rather than scales. I can offer no rhyme or reason for when Illustrator will behave as advertised and when it will ignore the modifier keys.
The example above involves the free transform tool, but the problem occurs just as often with other tool behaviors that require a modifier key + mouse combination.
Primarily using Wacom Intuos3 tablet. (with latest drivers), but have also tried combinations with microsoft mouse or both mice installed.
Also, immediately after an occurrence Illustrator bug, left AI open, went to a different app that uses mouse+modifier (Ctrl+Click). That different app recognizes Ctrl+Click with no problems whatsoever.

Thanks Guys,
Good to know it's working for you. I guess that's the nature of intermittent bugs. Of course, Adobe's bug report form has a field for version, which I, of course, filled in. Sorry I didn't add it to this post. I'm using the latest version CS3 v13.0.2.
Stephen,
Sorry I was not more clear when I said, "For example, ...". I was talking about the modifier keys not working with several different tools. The Free Transform tool advertises functionality that is supposed to work with a "Click (down, but don't release)then hold down Ctrl" combination. The Rotate tool advertises a behavior that is supposed to work with an "Alt-Click" combination. These are just 2 examples of the modifier keys not working. I focused primarily on one example in the bug report(ctrl after and in addition to click in the free transform tool, not alt-click in the rotate tool).
Here is what I expect(quoted from Adobe's CS3 help file)
(From the "Distort Objects with the Free transform tool" help topic)
"Select one or more objects.
Select the Free Transform tool .
Start dragging a corner handle on the bounding box (not a side handle), and then do one of the following:
Hold down Ctrl (Windows) or Command (Mac OS) until the selection is at the desired level of distortion.
Hold down Shift+Alt+Ctrl (Windows) or Shift+Option+Command (Mac OS) to distort in perspective."
(from the "Rotate an object by a specific angle" help topic:)
You can control the exact angle of rotation with the Rotate command.
Select one or more objects.
"Do one of the following:
To rotate around the center point, choose Object > Transform > Rotate, or double-click the Rotate tool.
To rotate around a different reference point, select the Rotate tool. Then Alt‑click (Windows) or Option‑click (Mac OS) where you want the reference point to be in the document window.
Enter the rotation angle in the Angle text box...."
These Tool based mouse-key combinations do occasionally work as they are supposed to, so I know what the expected results are supposed to look like, but whether they work or not appears to depend on the phase of the moon, the day of the week, and the color of the president's underwear.
Other non-tool based mouse-key combinations in Illustrator work consistently all the time - Ctrl-A for Select All as just one example that always works.
Thanks Again

Like is not working with substr...

Similar Messages

Maybe you are looking for