"Like" sql function not working in Business Service
Hi all,
I have created a query with few Joins (Processing around 4-5 tables).It has Two scenarios, One with Equals and the other with Like function.
SELECT
ST.STREET,
ST.DECOMPLEMENT,
ST.STATE,
LC.LOCALITY,
DS.DISTRICT,
ST.CDZIP,
SP.street_type
FROM
STREET ST,
DISTRICT DS,
Locality LC,
Street_Type SP
WHERE
ST.CDZIP LIKE ?
AND ST.STARTDISTRICT = DS.DISTRICT (+)
AND ST.LOCALITY = LC.LOCALITY (+)
AND ST.STREET_TYPE = SP.street_type (+)
When There is an Equal Sign after Where clause, The query gives desired output. But when there is a LIKE it does not give any output at all. How can i use this Query using perform operation.
Hi Arun,
How are you using it? Using DB Adapter / X-Query function? I have run similar SQL Queries easily through DB Adapter.
Regards,
Anuj
Similar Messages
-
Bg_absence_duration sql function not working in Self Services
I Have SQl Function registered and used in formula BG_ABSENCE_DURATION, it is working fine in the professional forms, but in "Leave management" form in self services it gives error:
PER_EMP_NUMBER not found at line 231 of bg_absence_duration Cause: a sql select statement obtained from application dictionary return no rows when executed.
Edited by: Elrefai on May 29, 2013 10:11 PMHi Jay,
were you finally able to access DFF in BG_ABSENCE_DURATION , did the following piece of code worked ?
IF ABS_INFORMATION_CATEGORY = 'CA'
THEN
(If ABS_INFORMATION3 = 'Half Day'
THEN
( IF date_start = date_end THEN
(deduct_days = 0.5
days_between = days_between - deduct_days
duration = to_char(days_between) return duration, invalid_msg
ELSE
( duration = 'FAILED'
invalid_msg = 'Half day leave can be applied only for a day'
return duration, invalid_msg -
Read Timeout is not working with business service in OSB 11.6
HI All,
We have set below configuration in "Http Transport Configuration" of a business service.
Read Timeout- 8
Connection Timeout - 8
Authentication - None
Proxy Serve
Follow HTTP redirects - Disable
Use Chunked Streaming Mode - Enable
Even though backend is taking more than the configured value in Read Timeout but timeout is not happening in OSB, Connection time out also not worked, when we tested with wrong backend URL.
Any help for this configuration would appreciated.
Thanks,.Hi,
Have you invoked any Services before calling the Business Service.
If Yes, then the problem with the Invoked service.In this scenario even if you set the time out period it will not work..
If No, your request payload is high
Regards,
Kiran -
String CDF functions not working in business rules
Working with EPM 11.1.2. I created a calc script on the planning cube and it works perfectly. I then put the same code in a business rule and it will not validate. Please see the code below.
1) created udf folder in following directory
essbase/Oracle/Middleware/EPMSystem11R1/products/Essbase/EssbaseServer/java
2) modified udf policy to grant access to all
3) saved CDF_String.jar file to new udf folder on server
4) registered functions via maxl
5) stop/start application
6) stopped/started EAS services
I get the following error in the message window (line 9 is the JGetStringFromDouble statement):
"Encountered " "-> " "-> "" at line 9, column 35.
Was expected one of:
What do I need to do to get this code working as a business rule since I want to use RTPs in this routine?
FIX("No_Profit_Center", FY07:&CapAppEndYr, "Working Plan", "Current", "Manual_Input", "LOC", @Relative("Period",0), @Relative("Project",0), @Relative("Entity",0))
"AC_Unappr_Fcst_Depr"
IF ( "AC_Unappr_Fcst_Depr" == #Missing)
IF ("FY07"->"No_Period"->"AC_Depr_CC" != #Missing)
"AC_Unappr_Fcst_Depr"->(@MEMBER(@CONCATENATE("EN_",@JgetStringFromDouble("FY07"->"No_Period"->"AC_Depr_CC",@_False,@_False)))) = "AC_Unappr_Fcst_Depr_Temp";
ELSE
"AC_Unappr_Fcst_Depr" = "AC_Unappr_Fcst_Depr_Temp";
ENDIF
ENDIF
ENDFIXEdited by: jjdubb on Jun 11, 2012 9:10 AMI've had this issue with a different string function. Business Rules does not like the boolean parameters (@_FALSE) used in these CDF's. I had a similar issue and had to rewrite my CDF without the parameters. You basically need to hardcode the "with quotes" and "with decimals" parameters in the java code.
Hope this helps,
- Jake -
LIKE operator is not working in SQL Query in XML file
Hi Gurus,
LIKE operator is not working in SQL query in XML template.
I am creating a PDF report in ADF using Jdeveloper10g. The XML template is as follows
<?xml version="1.0" encoding="WINDOWS-1252" ?>
<dataTemplate name="catalogDataTemplate" description="Magazine
Catalog" defaultPackage="" Version="1.0">
<parameters>
<parameter name="id" dataType="number" />
<parameter name="ename" dataType="character" />
</parameters>
<dataQuery>
<sqlStatement name="Q1">
<![CDATA[
SELECT ename, empno, job, mgr from EMP where deptno=:id and ename LIKE :ename || '%']]>
</sqlStatement>
</dataQuery>
<dataStructure>
<group name="EmployeeInfo" source="Q1">
<element name="EmployeeName" value="ename" />
<element name="EMPNO" value="empno" />
<element name="JOB" value="job"/>
<element name="MANAGER" value="mgr" />
</group>
</dataStructure>
</dataTemplate>
if i pass the parameter value of :ename from UI, it doesn't filter. But if I give ename = :ename it retrieves the data. Can anyone help me why LIKE operator doesn't work here?
Appreciate your help,
Shyamal
email: [email protected]Hi
Well for a start, you are doing some very strange conversions there. For example...
and to_char(a.msd, 'MM/DD/YYYY') != '11/11/2030'
and to_char(a.msd, 'MM/DD/YYYY') != '10/10/2030'If a.msd is a date then you should e converting on the other side ie.
and a.msd != TO_DATE('11/11/2030', 'MM/DD/YYYY')
and a.msd != TO_DATE('10/10/2030', 'MM/DD/YYYY')Also, you may want to take into consideration nothing being input in :P2_ITEM_NUMBER like this...
AND INSTR(a.item_number,NVL(:P2_ITEM_NUMBER,a.item_number)) > 0Is item number actually a number or char field? If it's a number, you want to explicitly convert it to a string for using INSTR like this...
AND INSTR(TO_CHAR(a.item_number),NVL(TO_CHAR(:P2_ITEM_NUMBER),TO_CHAR(a.item_number))) > 0?
Cheers
Ben -
Why is the scroll function not working after accessing the voice feature in settings?
Why is the scroll function not working after accessing the voice feature in settings?
For some prerecorded audio files the Transpose slider will not work reliably. I found no clear pattern, when it does and when not.
If all fails, create a loop from the audio file. Select the region in the track and use the command "File: Add region to Loop library".
Set the current key and tempo, name the loop, and save the loop.
Now add it from the loop browser to a new track and delete your old track. The search field in the Loop browser will help you to find the loop quickly.
You will be able to transpose the sample as described above, like a regular loop.
For example - a audio file turned into a loop and transposed: -
Why is my touch screen function not working when using facetime
Why is my touch screen function not working when using facetime
Hello megascones,
After reviewing your post, it sounds like the screen is not responding to touch in one app. I would recommend that you read this article, it may be able to help the issue.
If the screen on your iPhone, iPad, or iPod touch doesn't respond to touch - Apple Support
Restart your device. If you can't restart, reset your device.
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
After upgrading to maverick; help & other functions not working
After upgrading to maverick; help and other functions not working?
Sometimes just closing and reopening the Help window will clear up the problem. If it doesn't, log out or restart the computer and try again. Otherwise, you may need to delete the Help cache.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Caches/com.apple.helpd
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder selected. Move the selected folder to the Trash. Log out, log back in, and test. Help pages will be slow to load at first.
If that doesn't work, the problem may be caused by network conditions. It may go away by itself, though I can't say how long you should wait.
A persistent failure to load help data has been reported as an issue with satellite networks. Test on a different network, if possible. I've also seen at least one report that Photo Stream in iCloud can mysteriously interfere with Help. I'm not sure whether that's true, but try disabling Photo Stream, if applicable.*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!
-
I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?
You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
What will you do if any SQL is not working. in oracle 10g....apps 11.5.10.2
928714 wrote:
yes sir.If you help me in answering my questions i wll be very thankful to you sir.
tnx,I haven't a clue.
As you have been advised in many of your posts, go study the documentation for whichever specific topic you are interested in.
For me to answer your questions, I would need to go get that documentation.
Then I would need to read that documentation.
Then I would need to write a forum post that interprets what I think I learned from that documentation.
It is so very much faster if YOU go do that instead of posting to a forum and expecting others to do it. You will remember what you study for a lot longer time if you teach yourself. -
he menu button of the ipod touch (4th generation) is not working and the service center of ipod is asking us to pay for the fixation of the said item even though it's still on warranty. this is the case number 215866894. And the service center said that they don't cover that center part of the ipod so they're asking us money before they can fix it. We bought the ipod last december 8, 2010 and we brought it to the service center last april, 2011 here in the philippines. And until now they're not fixing it because they're asking us to pay half the price of the item which is 8,040 pesos..
As advised, you need to call Apple about this.
http://support.apple.com/kb/HE57
No one here works for Apple (no one who will reply, anyway) so there's nothing anyone here can do to help you with this issue.
Good luck. -
Facebook like button is not working, I have used the muse widget and created code from facebook. Does anyone know how to get this to work?
Hi connally25,
Below is a link to a video tutorial on how to add a Facebook Log button, please check if you have followed the same steps to add the video.
http://tv.adobe.com/watch/learn-adobe-muse-cc/adding-a-facebook-like-button/
If you have followed the steps correctly and the button still does not work; here is a link to a forum thread which might help solving the issue:
Facebook Follow Widget not working
Regards
Sonam -
Copy/paste function not working in Firefox 22. Always good in previous versions
Copy/paste function not working in Firefox 22. Always good in previous versions editions
Well I've uninstalled FF22, thanks for the suggestion.
Chrome works perfectly with ZA and C&P. -
MDX -Children count function Not working in Case statement
Hi,
I am trying to create set when you slice with the Hierarchy member is leaf level , I want a output only that Leaf level .
and When I slice with the parent level , it has to give all the members below that parent level.
But the problem here is when I select child member or leaf member , The first condition in the Case is not working
WITH SET
TESTSET AS
CASE
WHEN
[Dimension].[Hierarchy].currentmember.children.count<0
THEN
[Dimension].[Hierarchy].currentmember
ELSE
DESCENDANTS([Dimension].[Hierarchy].Currentmember,,AFTER)
END
SELECT
WBSSET ON 1,
{} on 0
FROM
(SELECT {[Dimension].[Hierarchy].&[10]} ON COLUMNS FROM [CubeName])
Thanks,
SantoshHi Santosh,
I don't think Children count function not working in case statement, I have tested it on my local environment, here s the sample query for you reference.
with member
testset as
case
when
[Geography].[Geography].currentmember.children.count<10
then "X"
else "OK"
end
select testset on 0,
{[Geography].[Geography].[Country].members} on 1
from
[Adventure Works]
In your scenario, the issue might be caused by the query isself, you can try to use IsLeaf Funcion to achieve your requirement. Please refer to the links below.
http://msdn.microsoft.com/en-us/library/ms144932.aspx
http://www.databasejournal.com/features/mssql/article.php/3633696/MDX-Operators-The-IsLeaf-Operator--Conditional-Logic-within--Calculations.htm
http://www.mdxpert.com/Functions/MDXFunction.aspx?f=22
Regards,
Charlie Liao
TechNet Community Support
Maybe you are looking for
-
Calendar Analytics application won't install with MS Office 2013 on PC
I use Calendar Analytics, a Microsoft approved application, to analyze Outlook Calendars for utilization rates within my facility. It has worked well for me for several years. Since I upgraded to Microsoft Office 2013, I cannot get Calendar Analytics
-
Editing iPhotos in Aperture, getting them back to iPhoto
So I'm trying out Aperture and I like it a lot. I find it a lot easier to use than PS. However. Since my girlfriend is of a simpler state of mind when addressing how much a photo needs to be edited she only wants to use iPhoto. (i.e I stared using Ma
-
Hi Experts, We got a problem here. We have a query ran without any problems in RSRT. But when I try to put it as data sources(infoprovider) in APD. I got following error: column store error: fail to create scenario: [340 2048 We are in BW731006 & ABA
-
How to show folders first in finder
How can i setup my finder to show Folders first? I want it to always show the folders first in any folder on my mac. How can i do that?
-
I get this error when trying to start iTunes in 10.8.4 This is really anoying from a frsh install of Mountain Lion. What is going on with Apple the errors keep coming.