Limit Enhancement component list for Business role

Hello,
I have defined Enhancement Set, in it I have a list of enhanced components (table BSPWDV_COMP_EXT).
I have a business role that need to use only one enhanced component from the list, and other components he will use as a standard.
I know that in BADI 'COMPONENT_LOADING’  I can assign Enhancement Set to business role.
But I don' t know where to limit the list of enhanced components (from table BSPWDV_COMP_EXT) for this business role.
How can I do it in CRM2007?
Best Regards,
Veronica

Hi,
I found way to choose which enhancement set will work with with bussiness role:
Need to implement BADI: COMPONENT_LOADING.
Example of code:
    DATA: lv_profile         TYPE REF TO if_crm_ui_profile,
          lv_role(12)            TYPE c.
    lv_profile         = cl_crm_ui_profile=>get_instance( ).
    lv_role = lv_profile->get_profile( ).
    IF lv_role EQ 'ZXYZ'.
      rv_result = 'Z_EHSET'.
    ENDIF.
lv_role - contains name of bussiness role.
rv_result - contains name of enhancement set that will be in used for specific bussiness role.
Laxman, you may leave rv_result empty. I think that in this case you will use standard component.
Best Regards,
Veronica

Similar Messages

  • Dealer Portal - Vehicle Management System - Personalization - Web Dynpro component assignment for business partner is missing

    Hi,
    In the Dealer Portal, Vehicle Sales Role --> Personalization.
    I am getting below Warning message.
    The Web Dynpro component assignment for business partner is missing.
    As per my investigation found below.
    Since address formats are different for each country, you can define in the Customizing activity Assign Web Dynpro Components to Country-Specific Address Formats under SPRO --> Logistics Execution --> Dealer Portal which Web Dynpro component you want the system to use for displaying end customer addresses.
    BUT do NOT understand the name of WebDynpro Component to provide.
    What are the entries or WebDynpro component names to fill in below?

    Hi Hussain,
    Could you share the step-by-step solution? Thanks.

  • Training and event management: Book Attendee List for Business Event List

    Dear all,
        I know this:
        PV07: book attendee list for business event
        PV08: book attendee for business event list
       Is there a tcode to book an attendee list for a business event list
    Thanks a lot in advance!

    Hi Federico,
    I think.., no. Below are the tcodes available to book attendee,
    PV00 Book attendee for business event
    PV01 Rebook attendee for business event
    PV02 Prebook
    PV03 Replace
    PV04 Cancel
    PV07 Book attendee for list  for Business event
    PV08 Book attendee for business event list.
    Let me know if you found tcode for your requirement.
    Thanks,
    Karunakar

  • Navigating to another component based on business role

    Hello Experts,
    I have a hyperlink created for Lead No to navigate to Lead Overview page from my Z component.
    How do I restrict this navigation based on business role?
    Thanks in advance,
    Regards,
    Surekha.

    Hi Surekha,
    You can get the Business Role of the logged in user using the code in this thread.
    Re: Business Role of logged in user
    Now in the event handler or outbound plug being used for the navigation, determine the business role.Based on this, write an exit statement to restrict navigation. You can give a message to notify the user.
    Regards,
    Masood Imrani S.

  • New componant list for service desk in Solution manager.

    Hello,
    We wanted to customize new componants for service desk. Please let me know is it possible to define new componant list in the Solution manager.
    Regards,
    Bhavesh

    Hello Waseem,
    Actually I want to configure a list of Customise component in side solution manager for incident management.( service desk)
    when we create ticket in service desk (in Solman) we have to select a component for the respective module( like BASIS, MM , Etc) those are the standard
    Components that is  given by SAP. I want to change that list and want to put my own list of component in the system.
    is it possible to do it in Solution manager? If yes then what sort of configuration required. ?
    Thanks in Advance
    Regards,
    Bhavesh

  • "All JIT Checks Not Passed" while printing component list for Rep. Manufact

    I am getting the error message "All JIT Checks Not Passed" in JITM when trying to process the Action "JIT component list".  I have verrified the production versions and that the part is set up for repetitive manufacturing. 
    Can anyone help with ideas to why this happens?

    Hi,
    In order  to avoid misunderstandings please confirm that you have setup activity SY520 (Document Print) in SAP ME application.
    I am not sure whether you posted this request to the correct forum or not.
    Best regards,
    Alex.

  • Telephony integration (CAD function profile for business role)

    Hi,
    1. What's the purpose of defining Contact Attached Data (CAD) profile, then assigning it to the business role?
    2. Have you got the step-by-step guidance in configuring that?
    Thank you.

    Lots of stuff posted in this forum over the last year you should be able to find to answer your question.
    What is Computer Telephony Integration (and Why Do I Need It?)
    IMG
    1. SM59 setup pointing to the vendor ICI product
    2. IMG Path: u2192 Customer Relationship Management > IC Web Client> Basic Functions > Communication Channels > Define Communication Management Software Profiles
    3. Assign to IC web profile as Contact Center (item created in 2nd step)
    non IMG (done manually in each client, dev, test, prd)
    4. CRMM_BCB_ADM, define name and point to step 1.
    5. CRMM_IC_MCM_CCADM add item from step 4, choose channles phones, and ques are phone 3. Set CAD handling to 4 (leave blank for SAP CCS).
    6. CRMM_IC_MCM_CCLNK step 2 to step 4.

  • Purchase Order With Sub Item Component List for BOM material..??

    Hi MM Experts,
    We want to create PO with a component list that should be appears under the main item.
    The component list is a mterial BOM.
    Ex:- bom MATERIAL - CATALOG1 (Non Stock Materials)
    COMPONENT 1 :-ABCD
    COMPONENT 2 :- XYZ.
    WHEN I ENTER THE BOM MATERIAL:- CATALOG1 IN /ME21N . Higher-Level Item-
    Automatically botom line should be appear component 1 , 2 as a Sub Item.
    how to configur this issue..?? Its a standard Ponot Subcontract
    Thanks,
    NAR.

    Hi!
    If you have correctly maintained the BOM in CS01, make sure that in ME21N you enter "L" as the item category, and then, in the field "material", enter the finished product (the header material in your BOM). Then, enter all other required fields.
    When all mandatory data has been completed in ME21N, go to the "Material Data" tab. Here you will see an icon named "Components". If you click this icon, the materials in your BOM will be listed here.
    So, please, do not expect the BOM to be displayed with mother and daugther segments in the item overview of ME21N. Instead, consider that you will only be able to see the components if you click the "Components" icon under the "Material Data" tab at item detail level.
    I hope this helps!
    Esther.

  • Short dump "Time limit exceeded" when searching for Business Transactions

    Hello Experts,
    We migrated from SAP CRM 5.2 to SAP CRM 7.0. After migration, our business transaction search (quotation, sales order, service order, contract etc) ends with the short dump "Time limit exceeded" in class CL_CRM_REPORT_ACC_DYNAMIC, method DATABASE_ACCESS. The select query is triggered from line 5 of this method.
    Number of Records:
    CRMD_ORDERADM_H: 5,115,675
    CRMD_ORDER_INDEX: 74,615,914
    We have done these so far, but the performance is still either poor or times out.
    1. DB team checked the ORACLE parameters and confirmed they are fine. They also checked the health of indices in table CRMD_ORDER_INDEX and indices are healthy
    2. Created additional indices on CRMD_ORDERADM_H and CRMD_ORDER_INDEX. After the creation of indices, some of the searches(without any criteria) work. But it takes more than a minute to fetch 1 or 2 records
    3. An ST05 trace confirmed that the selection on CRMD_ORDER_INDEX takes the most time. It takes about 103 seconds to fetch 2 records (max hits + 1)
    4. If we specify search parameters, say for example a date or status, then again we get a short dump with the message "Time limit exceeded".
    5. Observed that only if a matching index is available for the WHERE clause, the results are returned (albeit slowly). In the absence of an index, we get the dump.
    6. Searched for notes and there are no notes that could help us.
    Any idea what is causing this issue and what we can do to resolve this?
    Regards,
    Bala

    Hi Michael,
    Thanks. Yes we considered the note 1527039. None of the three scenarios mentioned in the note helped us. But we ran CRM_INDEX_REBUILD to check if the table CRMD_ORDER_INDEX had a problem. That did not help us either.
    The business users told us that they mostly search using the date fields or Object ID. We did not have any problem with search by Object ID. So we created additional indices to support search using the date fields.
    Regards,
    Bala

  • Attachment list for business objects is not visible

    Dear all
    I have connected an external server to SAP.
    Created repository and created Doc types (say for ex : ZFIINV,  ZMM DRW) and created entries using tcode OAC3
    now i have assigned my doc type to corresponding Business Objects (BKPF for accounting doc,BUS2105 for purchase requisition ,MKPF for MM related docs)
    now i have created entries for my scanned docs in table TOA01.
    i can search an display these docs which are already placed  there in my content server. but i can not see these documents links entries in the attachment list of corresponding Business objects entries.
    for example in BO : BKPF  attachment list i cant see al the link entries .
    please suggest whether any BO is not published or R/3 application connection to the generic object service is not done?
    thanks sandeep

    Hi Sandeep,
    I am not totallt getting your point but can suggest following points:
    1. Check whether these object are displaying in DIR's as object links.
    2. If it is there then it shoud be displayed in document data of those objects.
    3. Check that documents are properly checked-in.
    Hope this may help.
    Regards,
    Ravindra

  • Where used list for business objects in TM

    Hi,
    There is a where used list framework in TM7 for
    Transportation Zone, Lane etc.  Is it possible to include the same for TCM business objects like
    FA, Tariff, TCCS, Rate Table, Scale etc.  Is it possible to do the customization?
    Thanks and regards,
    Suresh.

    Hi
    The following may of useful to you.
    https://wiki.sdn.sap.com/wiki/display/ESpackages/IntegrationofTransportationManagementSystemBusinessObjects
    Regards
    Shan

  • Generation of assigner list for Admin Role

    Hello!
    How I can dynamicaly generate the list of assigners ( the users, who could assign the role to other users) ?
    I can do it manualy, one by one, but i want create a rule where the list calculates automaticaly.
    And it is impossible to insert Rule into AdminRole object. Could you help me to solve the problem?

    Hi,
    Use FBL3N to go for open line items and give the Baseline date. u can find the all the open item which u can prepare for the payment.
    Regards
    Divya

  • Business roles for diffrent org positions

    Hi guys,
    I have an issue:
    I have an organization model:
    Org ABC-> Org A-> channel manager
                  -> Org B-> partner manager
    I assigned channel manager role to channal manager in org A but when i assign partner manager role in org B , it overwrites the channel manager role for org A also. In short the organization model is taking only one business role. What could be the issue?
    I have assigned the required PFCG roles to both the business roles.
    Plz help!!
    Regards
    Shikha

    HI Shikha,
    i hope you are assigning the Role to the Position cretaed in your org model.
    That is by navigating thru
    GO TO-DETAIL OBJECT-ENHANCED DETIAL DESCRIPTION-By creating new infotype for Business Role
    here one can assign the Business Role with the position.
    In case you are not assigning by above mentioned way. Try to do so. Hope this will help.
    Vijayata

  • Authorizations & Business roles for ITSM

    Dears,
    i would like to ask whoever implemented an ITSM as a service desk for an IT organization, after setup the Organizational Structure (Organizational Model) and setup the Organizational Unit  (Sold To Part) and Org. Object (Support team).
    what is the best approach to give Authorizations & Business roles for :
    1) new employee joined the company as an End User (Requester).
    2) new employee joined the company as one of the IT Help desk (Dispatcher, Processor....etc.)
    Regards,
    Yazeed

    HI Shikha,
    i hope you are assigning the Role to the Position cretaed in your org model.
    That is by navigating thru
    GO TO-DETAIL OBJECT-ENHANCED DETIAL DESCRIPTION-By creating new infotype for Business Role
    here one can assign the Business Role with the position.
    In case you are not assigning by above mentioned way. Try to do so. Hope this will help.
    Vijayata

  • Limit selection list for variables

    Hello Experts.
    Is there a way to limit the selection list for variables?  For example, there are many possible currency values for 0CURRENCY, but I want allow the user to choose only one of these choices USD, EUR, or HKD.  I would rather not do a validation check subsequent to the users making their selection.
    I must use 0CURRENCY rather than copying it to another characteristic and entering only those three keys in master data.
    Any ideas?
    Kind regards,
    Aron
    Edited by: Aron Weaver on Oct 1, 2010 1:08 AM

    If you are using the standard info object which is referring to '0CURRENCY' then it mayn't be possible to restrict the 'F4' list to few currencies in the standard BEx environment. There are couple of options to limit the 'F4' selections using the web template /BSP technology.

Maybe you are looking for