Limit the number of session per user in the Wired dot1x environment with ISE 1.2

Hello,
I need to check if there is any configuration/workaround to limit the number of sessions/access per user in the Wired dot1x configuration.
I need to check if this feature is available or not to solve the following scenario:
I have 2 SW ports configured to use dot1x authentication with ISE 1.2 server.
If user A connects to the 1st port and authenticated then he will placed on a VLAN based on the authorization profile.
The case, that I need to deny the same user to connect on a different machine with the same credentials.
The ISE itself does not have this feature currently, the only feature available is to limit the number of sessions for the guest user.
Is there any workaround on the Cisco switches to solve this? Cisco WLC has this feature and for the VPN we can limit the number of sessions also from the ASA itself.
Thanks.

limit number of session per user using wired dot1x is not available in 1.3

Similar Messages

Maximum Number of Sessions per User

I am using OAM 11.1.1.5.0 running on Solaris 10. When we change the "Maximum Number of Sessions per User" to 1 (per customer requirement), a user is restricted to having one active OAM session at a time (as expected). However, if the user does not explicitly log out (e.g. they just close their browser), they are unable to log back in to OAM until their existing OAM session times-out/expires. Given the above max sessions of 1 requirement, is it possible to config OAM to auto-kill the user's session and create a new one if they attempt to login before their initial OAM session times-out/expires? This was possible in Sun's Access Manager. Is it possible in Oracle's OAM? Thank you in advance for your reply.

Hi,
Maximum session per user 0-9 and how can configure see the below link:-
http://help.sap.com/saphelp_nw70/helpdata/en/97/76a341ac57ef0be10000000a1550b0/content.htm
Regards,
Anil

Limit on Number of Roles per User

We seem to have run into a limit on the number of roles that you can add to a user object. We are running IDM 5.0 sp1. Is this a know issue or is there a configuration setting we can change? The error that we are getting is as follows:
com.waveset.util.InternalError: Summary String length (2697) exceeds maximum (2048).

I got the solution for this problem
1) Change the database to support more data in summary attribute
2) Change the configuration--> repositoryconfiguration to support more data in summary attribute.
Please note: After changing the configuration app server needs a restart.

How do I monitor the number of logged on users in EP6.0 SP11?

Hi folks,
We are on SAP Enterprise Portal 6.0 SP11.
I want to know the procedure by way of which I can monitor the number of logged on users in the Portal. Again, the logged on users can mean two things:
1) Number of unique users at any given time
2) Number of user sessions at any given time
Now, here are certain things I know:
1) EP6.0 SP2 had the Logged On Users iView. It's taken out in SP11 though.
2) The Portal Activity Report can be used for this purpose in SP11. However, we don't have any plans to implement that right now.
3) The Visual Admin can be used to monitor the user sessions and I am fine with that. However, my requirement is to collect user-load metrics every hour and I cannot really afford to monitor the Visual Admin that frequently.
4) If I use the J2EE Telnet Admin, I can come to know the number of user sessions.
As is apparent, I have no trouble getting the total number of user sessions. So, I guess the real question is - Is there any way by which I can know the number of unique users that are logged on to the Portal at any given time?
Kindly let me know if there is a way for that (other than maybe the Portal Activity Report), and I promise to reward generously
Thanks in advance!
Regards,
Sagar

Hello Sagar,
You have to write an application in that u have to use the follwing code
Step 1:
import the Files like
import com.sap.security.api.IUser;
IPortalComponentRequest request = IPortalComponentRequest)this.getRequest();
IUser usrSO =request.getUser();
strSOID = usrSO.getUniqueName();
Step 2:
Create a table at DB with the fields like userid Time and required filelds...
Step 3 :
Deploy your application and create a iview from PAR
then create a invisible iview or attach the iview at the end of the page and attach this in every user role
when the user logged in auto matically his ID will stored in the DB..
Try to attch this iview in visible mode into System Admin role ..see the Number of users logged in
But u have to write a efficient application for this
Don't forget to award points ....
Sreedhar G

Bode Analyzer: How to control the number of points per decade?

Total newbie here. I cannot control the number of points per decade in the Bode VI. It's always 5 points per decade.
Don't even know how to get the Elvis Version #, but it's at least 4.1, cuz the Elvis installer won't install 4.1 (says current version is newer). Running WinXP.
How can I get Elvis to respond to my request for more points per decade?
Mike
Solved!
Go to Solution.

Hi Mike,
If you're ever curious about what drivers that you have installed, you can view it using Measurement & Automation Explorer (Start » All Programs » National Instruments » Measurement & Automation Explorer). Once their, navigate to My System » Software, and you'll find NI ELVISmx along with it's version.
This behavior that you're seeing is a known issue, filed under Corrective Action Request (CAR) #373017. For now, the number of points per decade will remain at 5. Please wait for the next update of NI-ELVISmx to see if this is fixed.
Cheers,
Che T.
Applications Engineer
National Instruments

Limit the number of records per page in webi

Hello All,
How do i limit the number of records per page in webi?
i was asked to have not more than 20 records per page.
In " NUmber of Vertical records per page"(Quick display mode) the default value was 100, i am trying to set it to 20 ...but its not updating....its still taking 100.
I am on BO XI 3.1 Sp2 fix pack 3
Please let me know a way to accomplish this.Any inputs appreciated
Thanks

It can be done as follows:
1. create a variable at report level as:
v Test = Floor(RowIndex()/20)
2. Added this variable in the Block as a new column.
3. Select the v Test column, Right Click and set as section (also you can apply break).
4. Go to structure mode select section\break and go to properties tab and select the property "Start on new page".
Regards,
Rohit

How do I Limit the number of Clients Per AP, Per Radio

I'm have WCS, 2 - WLC4404, 1 - WLC4402 and 1 WISM (6509). All running 7.X OS.
Here is my problem I have 4 3502 AP,s in the hall, but the laptops all connect to one AP. 2 Clients on A and 26 Clients on G.
How do I control this?
Mike

If you want to limit the number of clients PER AP then this is a feature that has been identified and will be available in the next few version.
You can, however, limit the number of clients and default is set to 12.

How to change the maximum number of process per user in BW ?

Hi,
Do you know how to change the maximum number of process allowed per user ?
With RSRT we can customize the number of process per query but I don't know where we can customize the maximum number of process per user.
In fact, my production environment reach always the max number of process available in SM50...
Thanks a lot

Hi,
A user is not have the No. of processor but a work process can handle N No. of users. If a user hit any transaction v acn say from a list of N worl proceesor which has been taken the work.
Correct if I am wrong.
Regards
Syed.

How do I limit the number of measures per line in Logic Pro score editor

I would like to control the number of measures per line in Logic Pro X Score Editor, currently it puts random numbers of measures per line depending on the accumulated lenth of the measures per line, as if looking for "the best fit". Any ideas how to force four measures per line in my finished score?

Thanks, This solved my problem, the only thing I still needed to do was to find out how to open the Global format window. I fugured it out by opening the Score editor window / Layout / global format /then I saw the Max # of barlines. If you just go to the Logic Pro / Preferences then you never get to see the global format window unless you know to hit the "Score Project Settings" button on the bottom. But at least you showed me that there was such a option which limited the number of measures so I keep on trying until I fould how to reveal that option. Thanks !

No of Concurrent Sessions Per User Mismatch with profile settings

Hi
DB Version Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
OS RHES 5U2
I created a profile MYPROFILE and set the value of Concurrent Sessions (Per User) to 30. DB was bounced after creating the profile. I made this profile default for a particular user "MYUSER". I verified that by querying DBA_USERS (select profile from dba_users where username like 'MYUSER') I checked v$session with that particular user after sometime and noticed that it was showing 34 sessions. Some ACTIVE and some INACTIVE.
My question is, if I have set the maximum limit of concurrent sessions per user to 30 in myprofile and made this the default profile for MYUSER, then how come i am still able to see more than 34 sessions of myuser regardless of the status? I am not sure if this is relevant or not but the IDLE TIME is set to 15 minutes.
Thank you for your help
Edited by: user560883 on Jul 4, 2010 12:45 AM

user560883 wrote:
Hi
DB Version Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
OS RHES 5U2
I created a profile MYPROFILE and set the value of Concurrent Sessions (Per User) to 30. DB was bounced after creating the profile. I made this profile default for a particular user "MYUSER". I verified that by querying DBA_USERS (select profile from dba_users where username like 'MYUSER';) I checked v$session with that particular user after sometime and noticed that it was showing 34 sessions. Some ACTIVE and some INACTIVE.
My question is, if I have set the maximum limit of concurrent sessions per user to 30 in myprofile and made this the default profile for MYUSER, then how come i am still able to see more than 34 sessions of myuser regardless of the status? I am not sure if this is relevant or not but the IDLE TIME is set to 15 minutes.
Thank you for your helpDid you set the parameter resource_limit=true ? You must do it before you test sessions_per_user. You can do so like the following,
alter system set resource_limit=true;After this again try and post the feedback.
HTH
Aman....

The number of rows per page is greyed out when running in background?

Hi,
For a customized transaction the number of rows per page cannot be set when running in background.
While a background job is created in SM36 after entering the report name and the selection variant name in the properties of Format the rows and columns field is greyed out.It was not editable.
Is there any settings to be done or in the custom program any code change needs to be done?
Thanks in advance.
Regards,
Sharon.

Hi Gabriel,
After double clicking the format only the rows field is not set to edit.It was greyed out.Is it anything related to the printer settings that will be maintained for a user?
Regards,
Sharon.

Clustered WL 6.1 creates 2 server sessions per user

          It appears that WL 6.1 creates 2 HTTP sessions per user for a simple JSP object.
          It shows in "ADmin Console/mydomain> DefaultWebApp> Web Applications> DefaultWebApp>
          Servlet Runtimes":
          1 /count.jsp
          1 /*.jsp
          In a non-clustered environment this does not happen.
          Is that normal?


I found the problem myself. For some reason WL did not like any special characters in the system password. I am not sure which ones are valid and which are not but I am avoiding them all right now.

Single Database Session Per User in ADF/BC Application

Hi, I am using ADF with BC (JDeveloper 11.1.1.1). My application contains multiple application modules, each connected to the same JDBC data source. On the app server, I have configured the data source to use Identity Based Connection Pooling.
My current configuration is resulting in numerous database sessions for each user. I have a requirement to use only a single database session per user HTTP session. Is there any way to configure the application modules to achieve this?
Thanks,
Brad

Hi,
use a single root Am module and make sure the others are used as nested modules. This will create a single connection
Frank

"Hard limit on number of sessions reached".

Hi,
We have problem with out discoverer (10.1.2)
We are lunching Disco viewer from a link in our Portal.
Once the total session reach 100, we get the error
"Hard limit on number of sessions reached".
Also, we have noticed that, Even after closing the disco viewer (using browser x button) we see that the process runs till the default Timeout of 60 min.
How to make the sessions cleanup after the viewer is closed
Thanks

You can do what Tamir mentioned from your Application Server Control. Or you could raise a service request and ORacle will guide you pretty quickly ont his.
The best way to get out of a query is "File --> Close" X-ing out of the window will keep the query going.
Thanks,
-Esther

Maximum number of Sessions ever reached in the last two days

DB version:11gR1
We are studying the number of sessions created by one of our JAVA oltp application. We would like to know the maximum number of sessions reached in the last two days.
I can see max_utilization column from the query
select * from v$resource_limit where resource_name='processes'But i don't know the time interval (no of days) on which this value is based upon.

Hi,
One alternate option will be noting the value before you start the experiment using following statement.
select value from v$sysstat where name = 'user calls';
And running this SQL after you are done with making calls. Then you can subtract the two values to get the users calls made between the two times. Keep in mind that this will include all calls made to the database.
Regards

Limit the number of session per user in the Wired dot1x environment with ISE 1.2

Similar Messages

Maybe you are looking for