Bode Analyzer: How to control the number of points per decade?

Total newbie here. I cannot control the number of points per decade in the Bode VI. It's always 5 points per decade.
Don't even know how to get the Elvis Version #, but it's at least 4.1, cuz the Elvis installer won't install 4.1 (says current version is newer). Running WinXP. 
How can I get Elvis to respond to my request for more points per decade?
Mike
Solved!
Go to Solution.

Hi Mike,
If you're ever curious about what drivers that you have installed, you can view it using Measurement & Automation Explorer (Start » All Programs » National Instruments » Measurement & Automation Explorer).  Once their, navigate to My System » Software, and you'll find NI ELVISmx along with it's version.  
This behavior that you're seeing is a known issue, filed under Corrective Action Request (CAR) #373017.  For now, the number of points per decade will remain at 5.  Please wait for the next update of NI-ELVISmx to see if this is fixed.
Cheers,
Che T.
Applications Engineer
National Instruments

Similar Messages

  • How to control the number of fields in the Advanced mode in af:query

    Hi,
    How to control the number of fields in the Advanced mode in <af:query>?
    Say i have 20 fields in my table and i created a view criteria with 2 fields. It would work perfectly in Basic mode. But in the Advanced mode all other fields selection is possible on clicking the ADD Fields button. I did not want the client to make a search with all 20 fields. Only 10 fields are to be listed in the Advanced Mode even though there are 20 fields in my table.
    How do i control the list of fields in ADDFields button?
    Any ideas?
    KR

    You can uncheck the Querable property of the attributes which you need not show up in the Advanced Mode (but they will not show up in other modes too !) or programatically set the same as mentioned here -
    http://adfcodebits.blogspot.com/2010/11/bit-27-setting-view-object-attributes.htmlAlso you can hide the AddFields button as suggested here - http://www.notjustjava.com/2011/12/cool-tips-to-showhide-components-of-the-query-control-of-adf/

  • How to control the number of instances of an object ?

    Hi all,
    Can anybody answer, How to control the number of instances of an object being created?
    suppose at any point of time, if i would like to have 5 instances at the maximum, how can i disable the further requests?
    Thanks in advance
    Pradi

    write a factory method that controls the number of instances for you:
    import java.util.List;
    import java.util.Arrays;
    public class Bar
       private static final int MAX_BARS = 5;
       private static int numBars = 0;
       private int id;
       public static void main(String [] args)
          try
             int numBars = ((args.length > 0) ? Integer.parseInt(args[0]) : MAX_BARS+1);
             Bar [] bars = new Bar[numBars];
             for (int i = 0; i < bars.length; ++i)
                bars[i] = Bar.create();
             System.out.println(Arrays.asList(bars));
          catch (Exception e)
             e.printStackTrace();
       private Bar() { this.id = numBars++; }
       public String toString() { return "I am bar number " + this.id; }
       public static Bar create()
          Bar nextBar = null;
          if (numBars < MAX_BARS)
             nextBar = new Bar();
          return nextBar;
    }%

  • How to find the number of records per months  in cube

    Hi,
      how to find the number of records per months for my all cubes?
      Can i use the ListCube transaction to find totl number f records per cube monthwise ?
    Jimmy

    Hi,
    Here is a program to generate no of records and list of ODS and Cubes in Active version.Schedule this program in background and create a cube to load this information and schedule to the data from the file generated by the program. Schedule this all per you requirement.
    1.Copy the code into your Z<programname> from Se38.
    2.change the FILENAME in CALL FUNCTION 'GUI_DOWNLOAD' in the program to the location from where you can pick the information to load data to cube(eg Application server).
    3.Save program.
    4.Schedule the program in background as required
    5.Create cube with infoobjects to hold no of records and Infoprovider name
    6.Load this cube based on event after the program job is done.
    Hence you can report on this cube to see no of records in  CUBE or ODS in your box.
    Please find the code below.
    Cheers,
    Kavitha Kamesh.
    types: begin of itabs ,
          tabname type dd02l-tabname,
          end of itabs.
    data: itab type itabs occurs 0 with header line.
    data: counter type i.
    data: begin of itab1 occurs 0,
    tabname type dd02l-tabname,
    counter type i,
    end of itab1.
    DATA: ITABTABNAME TYPE STRING.
    DATA: LENGTH TYPE I.
    DATA: OBJECT(30).
    data: str(6) type c.
    select  tabname from dd02l into table itab where ( tabname LIKE  '/BIC/F%' or tabname LIKE  '/BIC/A%00' )
    and TABCLASS = 'TRANSP' and AS4LOCAL = 'A'.
    loop at itab.
      select count(*) from (itab-tabname) into counter.
      str = itab-tabname.
      if str = '/BIC/F'.
    LENGTH  = STRLEN( ITAB-TABNAME ).
      SHIFT  itab-tabname BY 6 PLACES LEFT.
    ELSEIf  str = '/BIC/A'.
      SHIFT  itab-tabname BY 6 PLACES LEFT.
      LENGTH  = STRLEN( ITAB-TABNAME ).
    LENGTH = LENGTH - 2.
    endif.
      itab1-tabname = itab-tabname(LENGTH).
      append itab1.
      itab1-counter = counter.
      clear itab-tabname.
      clear:  COUNTER.
    endloop.
    *********** itab1
    loop at itab1.
    write:/ itab1-tabname, itab1-counter.
    endloop.
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
    *   BIN_FILESIZE                    =
        FILENAME                        = 'c:records.xls'
        FILETYPE                        = 'ASC'
    *   APPEND                          = ' '
        WRITE_FIELD_SEPARATOR           = ','
    *   HEADER                          = '00'
    *   TRUNC_TRAILING_BLANKS           = ' '
    *   WRITE_LF                        = 'X'
    *   COL_SELECT                      = ' '
    *   COL_SELECT_MASK                 = ' '
    *   DAT_MODE                        = ' '
    *   CONFIRM_OVERWRITE               = ' '
    *   NO_AUTH_CHECK                   = ' '
    *   CODEPAGE                        = ' '
    *   IGNORE_CERR                     = ABAP_TRUE
    *   REPLACEMENT                     = '#'
    *   WRITE_BOM                       = ' '
    *   TRUNC_TRAILING_BLANKS_EOL       = 'X'
    *   WK1_N_FORMAT                    = ' '
    *   WK1_N_SIZE                      = ' '
    *   WK1_T_FORMAT                    = ' '
    *   WK1_T_SIZE                      = ' '
    * IMPORTING
    *   FILELENGTH                      =
      TABLES
        DATA_TAB                        = itab1
    *   FIELDNAMES                      =
    * EXCEPTIONS
    *   FILE_WRITE_ERROR                = 1
    *   NO_BATCH                        = 2
    *   GUI_REFUSE_FILETRANSFER         = 3
    *   INVALID_TYPE                    = 4
    *   NO_AUTHORITY                    = 5
    *   UNKNOWN_ERROR                   = 6
    *   HEADER_NOT_ALLOWED              = 7
    *   SEPARATOR_NOT_ALLOWED           = 8
    *   FILESIZE_NOT_ALLOWED            = 9
    *   HEADER_TOO_LONG                 = 10
    *   DP_ERROR_CREATE                 = 11
    *   DP_ERROR_SEND                   = 12
    *   DP_ERROR_WRITE                  = 13
    *   UNKNOWN_DP_ERROR                = 14
    *   ACCESS_DENIED                   = 15
    *   DP_OUT_OF_MEMORY                = 16
    *   DISK_FULL                       = 17
    *   DP_TIMEOUT                      = 18
    *   FILE_NOT_FOUND                  = 19
    *   DATAPROVIDER_EXCEPTION          = 20
    *   CONTROL_FLUSH_ERROR             = 21
    *   OTHERS                          = 22
    IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.

  • How to set the number of rows per page dynamically

    Hello all,
    i urgent need the option to set the number of rows per page dynamically.
    I've got a parameter.
    In dependence of the value of this paramter i want to set the number of rows per page of a repeating frame.
    The Reports Builder version i use is 10.1.2.0.2
    I defined a report trigger.
    My code so far:
    function R_G_BEMERKUNGFormatTrigger return boolean is
    begin
    if :vYN_Display_one_per_page = 'Y' then
    --what i've to write right here??
    return (TRUE);
    else
         return (TRUE);
    end if;
    return (TRUE);
    end;
    Can anyone help me please??
    Best regards
    Florian

    Do you just need to change back and forth between 1 and some other number? If so, you can create two identical layouts, one with the "number of rows per page" preperty (on the repeating frame) set to 1 and the other layout set to whatever. You would have to have duplicate layouts for each group you wanted to do this with. Your format trigger on the outermost master group frame where num of rows was 1 would look like:
    function M_G_ename_GRPFRFormatTrigger return boolean is
    begin
      if :vYN_Display_one_per_page = 'Y'  then
        return (TRUE);
      else
        return (FALSE);
      end if;
    end;Your format trigger on the outermost master group frame where num of rows was whatever would look like:
    function M_G_ename_GRPFR1FormatTrigger return boolean is
    begin
      if :vYN_Display_one_per_page = 'N'  then
        return (TRUE);
      else
        return (FALSE);
      end if;
      return (TRUE);
    end;

  • How to control the number of running thread

    I need to maintain the number of running thread in the system or in a threadgroup, as too many running thread will make the system throughput drop tremendously because of the context swtich and memory problem. The threadgroup is not a solution as its active count is the number of the threads that are alive, it includes the thread being blocked as well. I don't know whether there is any way to control it without the use of an expensive monitor?
    Thanks for any help

    If you create a pool of any sort you will need a point where all requests for a resource from the pool must go via, and that piece of code could potentially become a bottle neck. But if you develop it well there will be a very small piece of code that is sychrnonized that will either put a request in a queue as there are no resources available, or it will provide the requested resource. As far as i am aware there is no safe way around this as you will have multiple threads requesting the resource.

  • How to control the number precision???

    Hi guys,
    I have a number 350.00
    I need to make 350.0
    How to do that on LV8.6?
    thanks in advance.

    testas123 wrote:
    However it is very bad that LabVIEW does not have NUMBER precision control (decimal point)!!! shame!
    Well, you can always write your own subVI with a few strokes of the mouse.
    If you are talking about truncation (a data operation) and not formatting (a cosmetic issues), be aware that many nice and round decimal digits cannot be correctly represented in binary, so you might still be slightly off when you would display e.g. 16 decimal digits.
    LabVIEW Champion . Do more with less code and in less time .

  • How to control the number of rows selected from a sybase database table?

    Hi, JDBC guru,
    I'm working on project using Sybase 11.9.x database.We need to process a record in a table,first select it from the table,then do some computing,finally write it to a dbf file, if the above steps succeed,remove the original row in the table.Quite evidently, all these operation should be put into one transaction. But how can I select just a number of rows from the sybase database table?
    Any hints?
    Thank you in advance.
    Regards,
    Jusitne

    Statement stmt...
    stmt.setMaxRows(20);

  • How to see the number of events per second received by MARS

    Hi,
    I have a MARS installed in a client for demonstration porpuse. Is there a way for me to see how many events per second has the MARS received?
    Like in the access-list's logs when even if it can not log due the rate limit it says "missed 20 packets due rate limit".
    So maybe the MARS can not process all the events, but it can say how many events it received per second in avarege.

    go to admin->system maintenance->view log files and look for message rate

  • How do I limit the number of measures per line in Logic Pro score editor

    I would like to control the number of measures per line in Logic Pro X Score  Editor, currently it puts random numbers of measures per line depending on the accumulated lenth of the measures per line, as if looking for "the best fit". Any ideas how to force four measures per line in my finished score?

    Thanks, This solved my problem, the only thing I still needed to do was to find out how to open the Global format window. I fugured it out by opening the Score editor window / Layout / global format /then I saw the Max # of barlines. If you just go to the Logic Pro / Preferences then you never get to see the global format window unless you know to hit the "Score Project Settings" button on the bottom. But at least you showed me that there was such a option which limited the number of measures so I keep on trying until I fould how to reveal that option. Thanks !

  • How to limit the number of items that a list control can hold?

    Hi,
    I am using a Flex3 List control for one of my projects.
    I add drag & drop functionality to it, so that i can drag & drop elements from one control to another.
    How to limit the number of items that a list control can hold / can be dropped in a list control ?
    - Sen.

    1. Listen for the dragdrop event on the control you are dragging onto.
    2. check the length of the items in the dataprovider - if it exceeds your maximum override the default drop action with e.preventDefault(); (assuming you used e for the event on the handler).
    Regards,
    Mark.

  • How to increase the number of rows to be displayed in BEx Web Analyzer

    hi,
    I am viewing reports using BEx Web analyzer option. It is displaying only 24 rows  of data at a time. How to increase the number of rows? do i need to any kind of settings?
    pls reply.

    Hi,
    I think the standard template in 2004s is named 0ANALYSIS_PATTERN. You can find it in Web Application Designer, open, and search for the technical name. If you want to change the number of rows or columns, you can find this setting near the bottom of the XHTML view of the template:
    <bi:BLOCK_COLUMNS_SIZE value="4" />
    <bi:BLOCK_ROWS_SIZE value="17" />
    Then just save, and ignore the error messages.
    Message was edited by:
            vind Reinsberg

  • How to delete the number saved in CALL FORWARDING list?

    how to delete the number saved in CALL FORWARDING list? seems like the number cannot be deleted in CALL FORWARDING list, i tried several times...
    he thing is, here are three numbers in the call forwarding list, one of them were set up by mistake, and none of them can be deleted.......it brothers me all the time. i already turn it off, but the number list is still there...

    Hello dennis130915 and welcome to the BlackBerry Support Community Forums.
    The image you have uploaded is unable to be displayed.
    Call Forwarding is a carrier controlled feature. Most likely, the number you see could be for the Voice Mail server.
    It's advised you call your mobile service provider to further assist with this feature.
    Thanks!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • How to set the number of elements dequeued?

    Hello All,
    I am relatively new to LabView. I use LabView 8.2 to detect Joystick movement using a set voltage threshold. Totally, I have 6 channels of analog input. The sampling rate is 2 Kilo Hertz with continuous sampling mode (buffer size set to 10 Kilo Samples). I show a visual stimulus on a computer monitor. Within  3 seconds from stimulus onset, the subject has to press the joystick. So I use a while loop that runs until the subject moves the joystick in any direction as detected by crossing of voltage threshold. The while loop was intended to run for a max of 3 sec if joystick was not moved. My intention while using the vi (see below) was to continuously monitor the voltage signal by means of removing voltage data points from the queue by the labview function/vi - "dequeue element". When I dequeue from inside the loop, the dequeue function removes about 100 msec worth of voltage data points ( = 198-201 points; sampling rate -2Khz) from each of the six channels. This creates problem for me because a single dequeue operation takes 40 to 85 msec during which the loop cannot be stopped. This results in miscalculation of the actual time when the joystick was moved.
    Is there a way to set how many data points the dequeue function removes? My goal is to remove about 1-2 msec worth of data points so that the loop can exit within under 5msec of the joystick movement.
    I have attached the screen shots of the subvi's I am using.
    Acquire Response.jpg - the while loop that has the subvi: Access Analog Data Queue
    Access Analog Data Queue.jpg - front panel of the subvi that has the 'dequeue element' function.
    Remove Element.jpg - a case of Access Analog Data Queue.vi showing the 'dequeue element' function
    Sorry for the long message. Any help would be greatly appreciated.
    Thanks
    Mani
    Attachments:
    Remove Element2.jpg ‏135 KB
    Acquire Response1.jpg ‏266 KB
    Remove Element1.jpg ‏135 KB

    Hello Lynn and tst,
    Thanks for your suggestions. I have attached a screen shot of a vi that has the enqueue function. As Lynn pointed out, it was the enqueueing size that was reflected in the size of the dequeueing. I tried various ways to control the enqueue element size in order to control the dequeue element size. Many of my tricks failed. I had set the data acquisition to be continuous at 2kHz with 10Ks buffer size. You may want to look at the attached image of the subvi "Analog Acquisition" while I explain my attempts. The first thing that I noticed was the 'dt' value in the input node of the timed loop which had been set by somebody to 100. I thought that was part of the reason why my dequeue size was always worth 100msec data points. So I changed it to 1 msec. This definitely made a difference in the chunk size of the dequeued element. Now dequeueing removes only data points worth 1 - 5msec. I also noticed that my data reading timer loop(the while loop in "Analog Acquisition" picture) takes about 20 -25 msec instead of the set 1 msec.
    Why does the loop take so long? I have set the 'number of samples per channel' to -1 so that DAQmx read.vi (see it in Analog Acquisition subvi block diagram) can grab whatever data is available currently and put that into the queue. Can this be a reason why the loop takes more than 20 msec? I also tried to set the number of samples per channel to 2. I reasoned that with the sampling rate of 2KHz, 1ms loop should be able to pull 2data points and enqueue them. But it gave me the much-often-seen error code ":Error -200279 occurred at DAQmx Read (Analog 1D Wfm NChan NSamp).vi:1->Timed structure(s): DAQ Loop". I tried various combinations of loop time and number of samples per channel. I get Error-200279 very often. Note that I have several state transitions and only in a couple of them during every cycle of state transitions, I remove elements and flush the data queue (one place where I remove elements is shown in my original message in the picture-'Acquire Response.jpg').
    How do I set the data acquisition loop to enqueue elements for exactly 1 msec or n msec so that I can control my dequeue size?
    Thanks a lot, I am getting really tired of fixing this problem. Please help.
    Mani
    Attachments:
    Analog Acquisition.jpg ‏363 KB

  • How to increase the number of data Business Object can pull for a report?

    Hi,
    I would like to ask around how to increase the number of data Business Object can pull for a report. I have a report which pulls data depending on the date range (ex. From 01/01/2007 - 01/10/2007). But, when the data that is pulled exceeds 5000, the report fails. Is there anyway to increase the number of data that BO can pull?
    Thanks

    Bobby,
       to my knowledge we can't change that. Let me explain this, we have setting in the source system for DS default Data Transfer. there we will assign the processes. if you want to assign 4 you need to change the setting in the source system. For flat files we can change in BW System. We can maintain the setting in the Infopackage level(wht we are assigned in the Source System), but we can't change the process.
    in order to check the setting in source system  SBIW--> General Settings --> Control Parameters for Data Transfer.
    we need to change here, this will effect to all the Data Sources. Before making changes check with your basis.
    All the best.
    Regards,
    Nagesh Ganisetti.

Maybe you are looking for