Limiting bandwidth on the CE

Hello
I need solution to a similar problem , really appriciate if you can help me on this.
I have taken MPLS services from my Service provider they have configured 8Mbps of MPLS bandwidth and 2Mbps of Internet bandwidth(using 2 Vlans) on their PE over a single physical link connecting to my Cisco1841.Please suggest me how i can ensure on the CE that internet users are not using beyond 2Mbps.All the interbet requests are being catered through a fortygate firewall , here is how the setup is.
----- Fortygate Firewall
PE---- CE--
------ LAN
Regards

Hi,
You can define CAR or policing using MQC and apply it on the internet sub-interface in the CE router.
Using CAR:
1.Define ACL first. Here you can say match any as the entire internet needs to be rate limited
2.Configure this "rate-limit input/output conform-action transmit exceed-action drop under the sub-interface.
refer this for CAR: http://www.cisco.com/en/US/docs/ios/11_1/feature/guide/CAR.html
Alternately you can apply this on the interface where Fortigate is connected for both inbound and outbound. The exceed action is usually drop which you can mark down the IP Precedece/DSCP as well.
HTH
Arun

Similar Messages

Getting really frustrated! I bought Photoshop 7, upgaded to CS2 then upgraded to CS3, now I have had computer problems and looks like both are now gone, they were not de-installed. I have limited bandwidth (I live int he country) and need a new box versio

I bought Photoshop 7, upgraded to CS2 then upgraded to CS3. I live in the country and have limited bandwidth for my internet, therefore, the cloud will not work and I must have a box version. In Jan Best Buy did work on my laptop and did not de-install CS3, now my desktop has died and believe CS3 on it is also gone. I have the serial numbers and can not find how to contact Adobe.
I only use it for photography and do not want CS6, so I need help, can anyone help me. Thanks a million.

Why on Earth are you getting frustrated? ?? !!
You don't even need to "contact Adobe", unless you need to activate that old deleted version. You are entitled to two activations.
Just download the CS3 trial version and input your serial numbers (the installer might prompt you for the previous serial number since your CS3 probably has an update s/n).
Download CS3 products <=== click on link
Anytime you want to look for something on the Adobe site, just do a Google search and add "site:adobe.com" (without the quotes) at the end of the string of keywords, for instance, this what to type in Google to find the CS3 downloads:
download Photoshop cs3 site:adobe.com
Just change "CS3" for whatever version you want.
Using the Adobe web site search function is futile.
Now, if you had two activations already, just call customer service and they will deactivate one or both for you—after quickly verifying your registration.. No big deal.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option.
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation

Limiting bandwidth on client side with Camera.setQuality() inconsistent?

After successful bandwidthCheck() limiting bandwidth to setQuality(75000, 100)
leads to the desired result of publishing the stream with max bitrate of 75000 byte/s.
On other locations the same setting results in publishing the stream with max bitrate of
approx. 13107 byte/s. If I change bandwidth to setQuality(400000, 100) i am reaching the desired
bandwidth limit of 75000 byte/s.
Stream is published with h264Settings.setProfileLevel(H264Profile.MAIN, H264Level.LEVEL_5_1).
Any clues?
These behaviour only occurs with outStream.videoStreamSettings = h264Settings;
If videoStreamSettings is not set to h264Settings all things are doing well as expected.

Here's a link that explains what BBSM is all about:
http://www.cisco.com/en/US/partner/products/sw/netmgtsw/ps533/index.html

SAP Implementation on Limited Bandwidth- Satellite Connection

Hi All,
I have an implementation scenario in which client has an overseas office connected by a 1 mbps satellite connection. We are proposing implementation of multiple instances.
I would like to seek information on the performance of SAP GUI/Web GUI on limited bandwidth connection as the bandwidth will get further downgraded to 512 kbps in the future.
Are there any tools available to enhance SAP performance in limited bandwidth environment. Please let me know of any documentation which explains SAP implementations with bandwidth constraints.
Thanks & Regards
Rasheed

hi rasheed,
there are several consideration you might want to consider ?
1. how many users on remote office will connect through that satellite connection ?
2. you can also try low speed connection setting (on SAPGUI). This is useful when you have limited bandwidth.
3. how big is your users (on remote office) will acquire from SAP server ?
maybe another SAP Gurus will add more checlists.
ardhian
http://sapbasis.wordpress.com
http://basishowto.blogspot.com

About how much bandwidth does the average Arch installation require.

So, I would like to install arch on an old computer, but I have limited bandwidth usage, as my (5-person) family has a 10 GB cap on our Internet usage. I was wondering as to how much data the average install uses. As long as it's under 100 MBs, it's fine. I have the install iso, and I don't need a DE. If I could get X (and stay under 100 MBs) that would be nice, but not necessary.
This isn't urgent, but if you know it would be nice.

What you could do is like run the pacman -S command for each package you would like to install, and then hit "n". Cut-n-Past all the packages and dependencies that you will need. Then get on the Internet from some other location and download all the packages from the website to a USB stick.
http://www.archlinux.org/packages/
Now, when you want to install; Boot into the Arch Live CD/USB and mount the USB stick with all the packages on it to /var/cache/pacman/pkg
mount /dev/sdb1 /var/cache/pacman/pkg
Now when you go to install the packages you want, pacman will see that it already has the newest packages in it's cache and use them instead of downloading them.
What country do you live in? Boy, 10GB cap! I'd burn through that in like 2 days or less. What really burns me is that there is Zero reason for an ISP to "Cap" anyones usage. Now, rate limiting is valid.

SG500x Port-channel limited bandwidth

Good Day All,
I have 2 Cisco SG500X-48 setup as Master/Slave using SFP-H10GB-CU1M (10GB Twinax cable).
First question is with the twinax cables
Since on the SG500x's you can not configure the 2*10GE Stacking Combo ports. If I put two cables in for redundancy will this cause a network loop, or will STP/RSTP catch this?
Next question is limited bandwidth.
I setup 4 Interfaces to Port channel with LACP. On the Server(HP Proliant Gen8 server(s)) end have the NIC Team with 4 NICs. When I run a network stress tool, it seems to cap at around 68MBs. Each port should being 1Gb, shouldn't I be getting closer to 4 GB?
My Configuration would read much like this:
VLANs setup:
##1-RF System
##2-VOIP
##3-LAN
interface Port-channel 3
spanning-tree portfast
switchport trunk allowed vlan add ##1,##2
switchport trunk native vlan ##3
interface gigabitethernet2/1/5
spanning-tree portfast
channel-group 3 mode auto
switchport mode access
interface gigabitethernet2/1/6
spanning-tree portfast
channel-group 3 mode auto
switchport mode access
interface gigabitethernet2/1/7
spanning-tree portfast
channel-group 3 mode auto
switchport mode access
interface gigabitethernet2/1/8
spanning-tree portfast
channel-group 3 mode auto
switchport mode access
I dont have much under standing on QOS yet, I assuming this would be based on setting up this?
Any direction or help would be greatly appreciated
Chris,

Hello Chris,
The way the stacking cables works is it detects when you are using two of them and switches over to what is called 'ring' mode. It doesn't use both links at once, but if one of those links fails it will immediately use the second one, usually not even dropping one packet. STP isn't an issue on the stack ports because it doesn't really use it, the stacking is a proprietary protocol that handles all of this for you. So go ahead and plug up your second set of cables, you should see a log message saying you have moved from 'chain' to 'ring'.
As for LAGs, this is a common misconception with link aggregation. I understand the logic, you have 4 gig links, why can't you get 4 gigs of throughput? It has to do with how LAGs actually work.
When a packet arrives at the switch and needs to go out the LAG the switch runs a calculation on the source and destination IP (or source and destiantion MAC depending on your settings). From this calculation it comes up with a number, in your case from 1-4. That determines the link that it uses to get across that LAG. There is no way to make one conversation use more than one link, it just isn't how it works. So when you run a speed test from one IP to one other IP, the result of the switch's calculation will always be the same number, hence all the traffic for that stream goes down the same link in the LAG.
There isn't any spillover, so even if one link is much busier then the rest it doesn't move them over to one of the other links.
On some enterprise switches you can use a load balancing algorithm that uses source and destination port, which can result in multiple conversations between the same two clients to use multiple links, but on the Small Business switches we only have IP or MAC.
Basically any one conversation will always be limited to whatever the speed of 1 link in the LAG is.
It is possible to utilize the link more, but you would need several different computers talking to the server to really see that. QoS would not change this.
As for your speed, it is a bit low, the max for a gigabit link is about 118MB/s (lab max, your mileage may vary) if you are using normal sized frames. This is assuming two devices directly connected to the with no routing required. How are you testing the speed? I like to use a program called Tamosoft throughput tester for this, which is available free on the web.
Hope that helps a bit,
Christopher Ebert - Advanced Network Support Engineer
Cisco Small Business Support Center
*please rate helpful posts*

Front-end memory and limitation cells of the BEX Analyzer

Hi BI experts,
After BW upgrade from BI 7.3 to BI 7.4 some heavy workbooks stopping to work, the error is "Client Out of Memory", the cause of this error is the memory capacity of .NET framework, this process can allocate a maximum of approximately 1.2 gigabytes (GB).
The notes 1040454 and 1411545 says that it´s possible to execute something like 750,000 cells but we made some adjusts and we could increase it until 1,800,000 cells, below some configuration we´ve made:
Query Designer:
Result Rows Always
Supress;
Display as Text or key;
Supress Zeros as Active (All Values = 0) and Effect on rows and columns.
Bex Analyzer:
Display Sort Icons Disable;
Apply formating Disable;
Allow navegation Disable;
We need some orientation how to further increase this limitation, or leaving the query lighter or increasing the memory limitation of .net framework or backing to BEX 3.5 funcionalities.
Has anyone encountered such problems in the update? Some alternative solution ?
Thanks !

Hello Caio,
The limitation lies on .Net Framework 32 bits which can handle 1.2 gigabytes.
You are reaching 1.8 Million because your datacells has no data or almost no data.
There is a KBA documenting your issue: SAP Note 1860872
There you will find a recommendation of Openhub, that allows you to extract data.
Just remember that BEx Analyzer is a tool for query navigation, not mass data extraction.
Kind Regards,
Edward John
SAP AGS

I want to install my photoshop 5.0 limited edition but the pc displays i should check if it is a 32 or 64 bit application. i changed my windows os from xp to win7 64 bit (i think that is the problem) how can i run my photoshop on this system?

i want to install my photoshop 5.0 limited edition but the pc displays i should check if it is a 32 or 64 bit application. i changed my windows os from xp to win7 64 bit (i think that is the problem) how can i install and run my photoshop 5.0 le on this system?

Kglad Creative Suite 2 is only applicable to individuals affected by the activation server shut down. A complete list of affected software titles can be found at Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products.

QM Sceneri: MIC which has it Limits dependent on the results of a MIC.

QM Scenerio
The plan has multiple MIC's all with limits. First five MIC's are independent and rest three are having their limits dependent on the results of a MIC eg with a formula. say 0.8X lower limit and 1.1X upper limit of a MIC., where X is the result of the fifth MIC. Similarly the 7th and the 8th MIC's are having limits dependent on the same MIC with different formula.
This kind of scenerio may be two times in an inspection Plan.
Can the Gurus kindly give me the solution how to do it.

No. Nothing that is standard. You will have to probably look at creating your own custom valuation FM. SAP allows you to create these FM's and then config them into the system. You would then selection the custom valuation in a sample procedure that you would create for each of these characteristics. The valuation for the characteristic would then be carried out according to your custom FM. No spec would be displayed in the inspection lot however. But he valuation should be possible.
FF

What does multi, one, premium and limited mean in the context of Indesign servers please?

what does multi, one, premium and limited mean in the context of Indesign servers please

You will likely get better program help in a program forum InDesign
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Getting the bandwidth of the client?

hi
can anybody tell me how can we get the bandwidth of the clients that are connected through java sockets ?
/Pushpak

No you can't unless you know that the client has a bandwidth that is lower than yours, and it hasn't any other upload/downloads at the same time.
And you can't always expect the client to have a lower bandwitdth. In sweden many home users have 100Mbit connections.
/Kaj

With the paid version - How many people can I send to at one time? Are there any download limitations (bandwidth or number of downloads limitation)?

I've grown to hate Hightail and was attempting to find out how Adobe Send compared - but the documentation is pitiful. I do webinars which means I may have a 200-400 people who will be downloading the file. Does the paid version allow this? What's the maximum size and the maximum number of downloads?

As you can see from other postings on this forum, we're currently experiencing upload problems for very large files, especially over slower internet connections. I suggest that you try to upload these files to your account at https://cloud.acrobat.com and then create Public links from there. You can then distribute the Public links for your users to access the files.

I have Hughesnet with limited bandwidth and even with adblock plus websites start flash videos now - how can I stop the videos from loading when the web page loads

Hughesnet only allows us to use an allotted amount of download. If I use tabs on Firefox, some pages start their bandwidth eating flash yada yada and waste my allotment. I'd like to have Firefox default to NOT loading flash unless I do something to say OK. Adblock plus helps eliminate flash ads, but not page content that is in flash.

https://addons.mozilla.org/en-US/firefox/addon/flashblock/

[SOLVED] Pacman -Syu on a (very) limited bandwidth

Hi
I've been using Arch for about a year, and I'm still pretty new to Linux and Arch. The reason I installed Arch in the first place was because of the how much control you have over your system, since you get to build it up according to your preferences. I absolutely love Arch for this and many other reasons.
The problem I have is that I am limited to 500mb bandwidth a month. I know this wrong, but I always avoid pacman -Syu because of the 500mb limit. I avoid any necessary upgrading, and only upgrade packages that need to be upgraded whenever I need to install a new package that I need. I know very well that this is the wrong thing to do, but seeing as I am limited to 500mb a month (which I already use alot of, if not all, on university stuff), I don't see how I could possibly carry out frequent system upgrades. Could anyone give me some advice? Should I not be using a rolling release distro because of this?
Last edited by flyswatter (2010-06-05 19:31:54)

@JackH79
Hope it'll work out all right for you. Would be a shame to lose you to an 'enemy distros' , just because of bandwidth restrictions.
Thank you. Don't worry, getting me off Arch is not gonna be easy
@syn
So is the public library's wifi off limits?
hmm...getting to the public library would be troublesome. I doubt most public libraries here have wifi anyways The uni library, as well as the rest of campus, gives us access to internet via wifi, but it has a ridiculous 150mb cap. Luckily, downloads on the uni network are unlimited, and I have a good feeling the Arch mirror is on the uni network. I'll just have to wait and see.
@mvdvarrier
Thank you. I was thinking about using Slackware, and it really helps knowing that the updates are small. I feel that I have found the solution because of my uni's arch mirror, but if that and all other attempts to stick to Arch fails, I think that sounds like a great plan B Still gonna try my best to keep Arch, I haven't used many distro's (Ubuntu, slight tinkering on a Fedora based distro...and Puppy Linux, Slax Frodo and ttylinux if tiny live distros count), but I really do like Arch's way of doing things.
Last edited by flyswatter (2009-12-09 16:51:39)

HOW TO CONFIGURE GUEST NETWORK AND LIMITE BANDWIDTH

Dear all,
Please help me how to configure internet access rule and limited the bandwidth for guest network via TMG Forefront 2010.
Thanks you & best regards,
Hung Viet

Hi，
First you can create the new network set which is mapped to guest subnet, after that you can create access rule for this network set.
If you want to control bandwidth, you may need 3-party tool like this:http://www.bsplitter.com/
Best Regards
Quan Gu

Limiting bandwidth on the CE

Similar Messages

Maybe you are looking for