Limiting 'For-Each' data entries

Hello
I have a template with various tables that insert rows using the 'For each' syntax. Is there a piece of code that enables a limit on the number of entries within the table?
For example, my table has:
for-each UGQualificationCompletedVORow_
and i want to make sure that only ten rows are seen on the template, what would the syntax be?
Many thanks
James

You mean you need to display only 10 rows from your group?
Then you can use <?for-each:UGQualificationCompletedVORow[position()<11]?>

Similar Messages

I am not able to set high and low limits for each channel seperately using LabWindows/CVI

I am using AI_StartAcquisition and AI_ReadAcquisition functions to acquire data using PCI 6025E DAQ card and iam using Lab/Wuindows/CVi5.0 software. But one of my transducer has its range in +/- 500 mV soi need to set the high low limits of each channel seperately for that i am using commond string function(cmd) but still i am not able to set the limits properly. Does anyone has any idea about this trouble

You can set the gain on a per channel basis by using the lower level functions. (As opposed to the easy i/o functions.) For example, look at the "SCANsingleBufSync.C" NI-DAQ shipping example that uses the SCAN_Op() function. It's gain parameter is an array of gains that will allow you to change the input limits for each channel separately.
-Russell

'Repeat Subform for Each Data Item' is greyed out

Hi there,
I need to make a certain subform repeatable but the 'Repeat Subform for Each Data Item' is greyed out. It's parent subform is not greyed out so I can make this repeatable but this is not the requirement.
Is there another setting that prevents a subform from being repeatable?
Many thanks,
Kieran Kelly

I guess you need to set the set the content flowed instead of positioned for which subform you want to repeat.
Click on the subform you want to repeat in the hierarchy panel , then in the object panel click on the content and set in the flowed format.
Hope it helps .
Thanks.
Bibhu

Tolerance Plus and Tolerance Minus for each Truck entry

For each material & Vendor, we have different Weighbridge tolerance.
for eg Material A : Weighbridge tolerance 5%.
for each truck entry, weighbridge tolerance is checked & Net Qty is captured for GRN.
How to capture Tolerance % during each Goods receipt (different for each material).
Mit

Thanks for the suggestion. I've edited the query and it works - if I limit it. Getting ORA-01452 error on the tablespace size when going for the full scope.
Further Question: the merge example in the 10g documentation shows:
WHEN MATCHED THEN UPDATE SET D.bonus = D.bonus + S.salary*.01
WHEN NOT MATCHED THEN INSERT (D.employee_id, D.bonus)
I only want to Insert - is it ok if I leave out the 'when matched'?

Not all my titles are showing for each data set

Hello,
I have made a column graph for 4 different data sets, I need the titles to show for each data set along the X axis. I highlight the titles in my data when making the graph, however, only two of the four are showing. Is there any way I can get all 4 to show?
^^^^ Need the title after Baseline and after Numb Hand
Thank you

Try clicking the chart then the blue 'Edit Data References' rectangle, and then in the lower left of the window switch from 'Plot Columns as Series' to 'Plot Rows as Series'. Then switch back if needed. All four should then show up.
SG

How do I create a chart of the number of entries for each date?

I have a table which contains bookings for an event I am running, with one row for each booking and a column for the date of the booking. I am trying to create a line chart which shows me the progress of the number of bookings over time. So the X axis would have one label for each day of the month - even if there was no booking on that day, and the Y axis would have the number of bookings, i.e. the number of rows, matching the date.
I have tried a few things without success, so I wonder if someone could help with this?
Thanks,
Nick

The top table is titled "Bookings" and the bottom table summariese the bookings by counting how many bookings fall on each day:
The bottom table:
B2=COUNTIF(Bookings :: $B, "="&A2)
select B2 and fill down as needed

Any cure for MySQL date entry problem?

On user entry forms with a MySQL database, dates must be
entered as YYYY-MM-DD, which for Americans is counter-intitutive. I
know about the option to use a series of very long drop-down lists
to select each of the pieces, but I find that both cumbersome and
time consuming. I currently am using instructions to the user with
each date field, but that is clutzy.
Does anybody know of a way to use "mm/dd/yyyy"?
Thanks!
Marty

.oO(MartyMatthews)
>On user entry forms with a MySQL database, dates must be
entered as YYYY-MM-DD,
>which for Americans is counter-intitutive. I know about
the option to use a
>series of very long drop-down lists to select each of the
pieces, but I find
>that both cumbersome and time consuming. I currently am
using instructions to
>the user with each date field, but that is clutzy.
>
> Does anybody know of a way to use "mm/dd/yyyy"?
MySQL expects the dates to be stored as YYYY-MM-DD in a DATE
or DATETIME
field. Use your script to convert from MM/DD/YYYY if
necessary, before
you insert the date into the DB. If you're on PHP, have a
look at its
date and time functions, especially strtotime() and
strftime().
Micha

Query for aggregates for each date in a date range

Hi,
I want to generate a Trend report with a T-SQL proc, which needs following logic.
Input -
Date Range say '10/10/12' to '20/10/12' (Say to check the trend of Size of account in 20 days of Trend report)
Account balance is captured randomly, (i mean not every day)
Table with date looks like this..
--Account Balance Table
CREATE TABLE AccBanalce (
BranchId SMALLINT
NOT NULL,
AccId CHAR(9)
NOT NULL,
Amount DECIMAL(9,3)
NOT NULL,
SnapShotDate DATETIME
NOT NULL
CONSTRAINT PK_AccBanalce PRIMARY KEY NONCLUSTERED (AccId, SnapShotDate) )
GO
Create CLUSTERED INDEX CIx_AccBanalce ON AccBanalce (SnapShotDate)
GO
--Date Range table
CREATE TABLE DateRange ( StartDate DATETIME, EndDate DATETIME)
GO
--Date for the Account Balance Table
INSERT INTO AccBanalce (BranchId, AccId, Amount, SnapShotDate)
VALUES (1, 'C1-100', 10.4, '10/11/2010' ),
(1, 'G1-110', 20.5, '10/11/2010' ),
(2, 'GC-120', 23.7, '10/11/2010' ),
(2, 'Gk-130', 78.9, '10/13/2010' ),
(3, 'GH-150', 23.5, '10/14/2010'),
(1, 'C1-100', 31.8, '10/16/2010' ),
(1, 'G1-110', 54.8, '10/16/2010' ),
(2, 'GC-120', 99.0, '10/16/2010' ),
(3, 'Gk-130', 110.0, '10/16/2010' ),
(3, 'G5-140', 102.8, '10/16/2010' ),
(2, 'GC-120', 105, '10/18/2010' ),
(2, 'Gk-130', 56.7, '10/18/2010' ),
(1, 'C1-100', 84.3, '10/18/2010' ),
(1, 'G1-110', 75.2, '10/19/2010' ),
(2, 'GC-120', 64.9, '10/20/2010' ),
(3, 'GH-150', 84.0, '10/20/2010' ),
(1, 'C1-100', 78.0, '10/20/2010' ),
(1, 'G1-110', 89.5, '10/20/2010' )
GO
--Date for DateRange Table
INSERT INTO DateRange (StartDate, EndDate) VALUES
('2010-10-11 00:00:00.000', '2010-10-11 23:59:59.997'),
('2010-10-12 00:00:00.000', '2010-10-12 23:59:59.997'),
('2010-10-13 00:00:00.000', '2010-10-13 23:59:59.997'),
('2010-10-14 00:00:00.000', '2010-10-14 23:59:59.997'),
('2010-10-15 00:00:00.000', '2010-10-15 23:59:59.997'),
('2010-10-16 00:00:00.000', '2010-10-16 23:59:59.997'),
('2010-10-17 00:00:00.000', '2010-10-17 23:59:59.997'),
('2010-10-18 00:00:00.000', '2010-10-18 23:59:59.997'),
('2010-10-19 00:00:00.000', '2010-10-19 23:59:59.997'),
('2010-10-20 00:00:00.000', '2010-10-20 23:59:59.997')
GO
Question -
I want TOTAL Balance of all Accounts in a Branch per each day between 10/11/2010 to 10/20/2010
If the Snapshotdate (date) on which the account was not made an entery to AccBalance table, last available balance to be considered for that account.
like for account [C1-100] on 10/15/2010 the balance should be [10.4]
--Group By Branch
--Last valid Account balance to be considered.
I know, this is long solution, but any one who is expert in T-SQL can help me in this solution.
Thanks,
Krishna

Thanks Himanshu You almost solved my issue...but can you provide the final output as following...
Actually you are aggregating the Amount, which is not required, as it is the total available in that account.
But the missing pint is I need the SUM of all the accounts for each DAY in a BRANCH.
The 3rd Result Query modified to get DAILY balances for each account as following...
--*RESULT*
SELECT a.AccId, a.StartDate,
(SELECT TOP 1 b.Amount
FROM #InterimOutput b
WHERE b.AccId = a.AccId and b.Amount > 0
AND B.StartDate<=A.StartDate ORDER BY B.StartDate DESC) as ToDateBal
FROM #InterimOutput a
ORDER BY a.AccId
go
Now I need SUM of all Account Balances AT each BRANCH on DAILY basics. Can you help on that?
Thanks again
Krishna

Date format for parameter data entry

I've just started working on MS SQL Server 2008 for the first time and am using Crystal XI11.5. I have a date parameter used to pick data. It works fine but the users are used to entering dates in mm/dd/yyyy format but this parameter forces users to enter using yyyy-mm-dd.
Normally I am not too concerned as there is the calendar but I have a couple of keyboard users who would like to just enter in the date format they are used to. I can't find any spot in Crystal to change the data entry format for the dates.
I do understand that SQL Server does store dates in yyyy-mm-dd format so is this why I only have this option? Any way to change it? I do have dates in the report presenting in d-MMM-yyyy format without problem, it's just the date entry prompt.
TIA rasinc

The later versions of CR will not allow you to directly edit the SQL statement. You actually have to add a Command and remove the tables from the data source. You can, if you wish, copy the SQL from the "Show SQL Query" and paste it into the Command.
The reason I tried to delete my previous comment is because it dawned on me (after I made the comment) that the date picker control itself, won't accept any format other than YYYY-MM-DD. So, while you can write the SQL to accept a variety of date formats, you won't be able use any of them while using that control.
The CR date picker control can be found (and therefore replaced by someone w/ more guts than me) in the following locations...
C:\Program Files\Business Objects\Common\3.5\crystalreportviewers115\prompting
C:\Program Files\Business Objects\Common\4.0\crystalreportviewers12\prompting
Jason

Sql query - Selecting last recorded values for each date in specified period

Hello,
Can someone please help me with my problem.
I'm trying to get last recorded balance for each day for specific box (1 or 2) in specified period of days from ms access database using ADOTool.
I'm trying to get that information with SQL query but so far unsuccessfully...
My table looks like this:
Table name: TestTable
Date Time Location Box Balance
20.10.2014. 06:00:00 1 1 345
20.10.2014. 12:00:00 1 1 7356
20.10.2014. 18:45:00 1 1 5678
20.10.2014. 23:54:00 1 1 9845
20.10.2014. 06:00:02 1 2 35
20.10.2014. 12:00:04 1 2 756
20.10.2014. 18:45:06 1 2 578
20.10.2014. 23:54:10 1 2 845
21.10.2014. 06:00:00 1 1 34
21.10.2014. 12:05:03 1 1 5789
21.10.2014. 15:00:34 1 1 1237
21.10.2014. 06:00:00 1 2 374
21.10.2014. 12:05:03 1 2 54789
21.10.2014. 15:00:34 1 2 13237
22.10.2014. 06:00:00 1 1 8562
22.10.2014. 10:00:00 1 1 1234
22.10.2014. 17:03:45 1 1 3415
22.10.2014. 22:00:00 1 1 6742
22.10.2014. 06:00:05 1 2 562
22.10.2014. 10:00:16 1 2 123
22.10.2014. 17:03:50 1 2 415
22.10.2014. 22:00:10 1 2 642
23.10.2014. 06:00:00 1 1 9876
23.10.2014. 09:13:00 1 1 223
23.10.2014. 13:50:17 1 1 7768
23.10.2014. 19:47:40 1 1 3456
23.10.2014. 21:30:00 1 1 789
23.10.2014. 23:57:12 1 1 25
23.10.2014. 06:00:07 1 2 976
23.10.2014. 09:13:45 1 2 223
23.10.2014. 13:50:40 1 2 78
23.10.2014. 19:47:55 1 2 346
23.10.2014. 21:30:03 1 2 89
23.10.2014. 23:57:18 1 2 25
24.10.2014. 06:00:55 1 1 346
24.10.2014. 12:30:22 1 1 8329
24.10.2014. 23:50:19 1 1 2225
24.10.2014. 06:01:00 1 2 3546
24.10.2014. 12:30:26 1 2 89
24.10.2014. 23:51:10 1 2 25
Let's say the period is 21.10.2014. - 23.10.2014. and I want to get last recorded balance for box 1. for each day. The result should look like this:
Date Time Location Box Balance
21.10.2014. 15:00:34 1 1 1237
22.10.2014. 22:00:00 1 1 6742
23.10.2014. 23:57:12 1 1 25
So far I've managed to write a query that gives me balance for ONLY ONE date (date with highest time in whole table), but I need balance for EVERY date in specific period.
My incorrect code (didn't manage to implement "BETWEEN" for dates...):
SELECT TestTable.[Date], TestTable.[Time], TestTable.[Location], TestTable.[Box], TestTable.[Balance]
FROM TestTable
WHERE Time=(SELECT MAX(Time)
FROM TestTable
WHERE Location=1 AND Box=1 );
Tnx!
Solved!
Go to Solution.

For loop
following query keep day (here 24 in below query) Variable from ( 1 to 28-29/30/31 as per month)
SELECT TOP 1 TestTable.[Date], TestTable.[Time], TestTable.[Location], TestTable.[Box], TestTable.[Balance]
FROM Test Table.
WHERE Time=(SELECT MAX(Time) FROM TestTable WHERE Location=1 AND Box=1 )
AND DATE = "2014-10-24";
PBP (CLAD)
Labview 6.1 - 2014
KUDOS ARE WELCOMED.
If your problem get solved then mark as solution.

Where Used List for Master Data Entries

Hi folks,
I am looking for a FM, method, etc. that gives me a list, that shows, where a certain master data entry of an InfoObject is used. The BW system makes this check implicitly, when trying to delete master data, but I couldn't get behind the logic yet.
Anyone here with helpful hints?

Hi Durgesh,
Thank you for your answer!
Unfortunately the two mentioned FMs are not helpful for me. I am looking for a where-used-list of master data entries, but not of InfoObjects. For example I am looking in which InfoCubes the measure pieces of InfoObject '0UNIT' is used.

Tool Tip for each JComboBox entry while moving mouse on them

What is the best way to implement a different tool tip for each entry in the combobox. Moreover, while moving the mouse over any entry the tooltip should be visible.

I'm not sure you can attach a tooltip to a JComboBox item, since these elements are not user interface elements, there may be anything(Integers, Strings, Icons,...). So how can you attach a tooltip to an Integer ?
I mean, in a menubar, you can attach a tooltip to a menu item, because there's this user interface object called JMenuItem wich has a tooltip text propertyinfo... but what about items in a JComboBox ?
I'm curious to know if this is possible.
Diego

Using a Macro to add a Carriage Return after each data entry within all cells of an imported range of cells

I have a macro that copies data from a Target workbook then pastes the data into a destination workbook. I then wish to use lookups in the destination workbook to view specific data from the pasted range of data on a separate sheet.
The problem is, the cells that contain numbers from the pasted data have the green dogeared error flags associated with the cell. The only way I can make a lookup function work, is to go to each cell and manually enter a carriage return after each entry.
The code for the macro is given below. What can be done so that the pasted data contains no errors associated with the number cells? Or can a second macro be written to clean the data. If so can you help me out? Thanks in advance.
Kindest Regards
Sub ImportData()
' ImportData Macro allows user to select an Excel workbook (i.e. Orchestrate Excel Output),
' then copy & paste it into the MediaSpreadsheet.
    Dim wbk As Workbook
    Set wbk = Application.Run("MediaSpreadsheet_1.0.xlsm!OpenFile")
    If wbk Is Nothing Then
        Beep
        Exit Sub
    End If
    Set wbk = ActiveWorkbook
    Range("A9:S116").Copy
    Workbooks("MediaSpreadsheet_1.0.xlsm").Activate
    Sheets("OrchestrateData").Select
    Range("A1").Select
    ActiveSheet.Paste
    With Selection.Font
        .ColorIndex = xlAutomatic
        .TintAndShade = 0
    End With
    With Selection.Interior
        .Pattern = xlNone
        .TintAndShade = 0
        .PatternTintAndShade = 0
    End With
    Selection.Borders(xlDiagonalDown).LineStyle = xlNone
    Selection.Borders(xlDiagonalUp).LineStyle = xlNone
    Selection.Borders(xlEdgeLeft).LineStyle = xlNone
    Selection.Borders(xlEdgeTop).LineStyle = xlNone
    Selection.Borders(xlEdgeBottom).LineStyle = xlNone
    Selection.Borders(xlEdgeRight).LineStyle = xlNone
    Selection.Borders(xlInsideVertical).LineStyle = xlNone
    Selection.Borders(xlInsideHorizontal).LineStyle = xlNone
    wbk.Close
    Sheets("MediaSchedule").Select
End Sub
DAPulliam64

Hi DAPAugust64,
The green "dogeared error flags" of the cells means that you paste numbers in these cells, but they're formated as Text.
So you need to change the cells back to the correct format so that the lookup function works fine. You can simply call this method after pasting:
ActiveSheet.Cells(1, 1).NumberFormat = "General"
ActiveSheet.Cells(1, 1) = ActiveSheet.Cells(1, 1).Text
Or use PasteSpecial method to paste the numbers as well as it's format:
https://msdn.microsoft.com/en-us/library/office/ff837425.aspx
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

User needs to see only one E&A database for manual data entry

Hi Experts
Please can you suggest a solution for the following requirement.
Requirement is that when a user log in to the Entry & Approval to entry the manual KPIs he should see only the one database which he is allowed to instead of drop-down and select the database which he has to enter the data as multiple models are created to Entry& Approval and Scorecards.
Tried to create model connection for the model and assigned to the user and when i login with that users also all the databases are visible and have to select a database from the list of databases available for entry&approval.
Thanking you,
Regards
Vinay.

More information, after running a profile trace the following 2 statements, the column with the default on a UDF returns a row while the other default does not. This might be the cause of this bug. Is the same logic to generate the object on
the subscriber used to generate the conflict table?
exec sp_executesql N'
select so.name, schema_name(so.schema_id)
from sys.sql_dependencies d
inner join sys.objects so
on d.referenced_major_id = so.object_id
where so.type in (''FN'', ''FS'', ''FT'', ''TF'', ''IF'')
and d.class in (0,1)
and d.referenced_major_id <> object_id(@base_table, ''U'')
and d.object_id = object_id(@constraint, ''D'')',N'@base_table nvarchar(517),@constraint nvarchar(517)',@base_table=N'[dbo].[repTable]',@constraint=N'[dbo].[DF__repTable__id__117F9D94]'
exec sp_executesql N'
select so.name, schema_name(so.schema_id)
from sys.sql_dependencies d
inner join sys.objects so
on d.referenced_major_id = so.object_id
where so.type in (''FN'', ''FS'', ''FT'', ''TF'', ''IF'')
and d.class in (0,1)
and d.referenced_major_id <> object_id(@base_table, ''U'')
and d.object_id = object_id(@constraint, ''D'')',N'@base_table nvarchar(517),@constraint nvarchar(517)',@base_table=N'[dbo].[repTable]',@constraint=N'[dbo].[DF__repTable__somein__1367E606]'
Pauly C

How do I create an installer for my project that allows for variable data entry like a server unc path?

Hello All,
I have a questions and a few hours of scouring the internet hasn't brought me much closer to an answer.
Here's what I want to do. I have created a visual c# wpf application. I want to have an installer that during install time will have a text box or something where I can enter a server path as a string. Basically my application needs to know where to look
for a server unc path \\server\somesharedfolder that it will be accessing primarily for its work. Secondly, how do I reference said information from within my code.
I have come across application/user scoped settings, which appears to be what I'm looking for. However I can't find a way to have the installer prompt for a value "Server Path:" __________ that I could type into during installation. So far it appears
the only way would be to edit the config.deploy file before running the installer, which isn't a big deal but you'd think there'd be an easy way to take in variables during install.
EDIT: Apparently I can't edit the config.deploy file as I get an error message about the hash not matching.
Thanks for your help!
Lance

Hello,
The forums I found confusing, didn't know the best place to put this question so I put it here.
I have found the answer over at stackoverflow and will detail here for anyone who may stumble across the same problem.
The problem is ClickOnce seemingly doesn't support this feature. Installshield LE either doesn't or does but its incredibly too complicated if all you need is one variable passed to the registry during installation. And it seems the words used for googling
this particular problem will never lead you to the solution.
So here's how to do it (we will be first adding the Visual Studio Installer Add-on to restore original installer project functionality):
1) Inside of visual studio 2013 go to Tools -> Extensions and Updates
2) On the left-hand side click on Online -> Visual Studio Gallery
3) In the upper-right search box search for "Visual Studio Installer"
4) Download the extension labeled "Microsoft Visual Studio Installer Projects"
5) Install, then open a new project under Templates -> Other Project Templates -> Visual Studio Installer -> Setup Project
6) Now for the gold. In the solution explorer there are icons in a bar just below its title bar, highlight till you see "User Interface Setup" and open it.
7) Now you can right click on Start, Progress, End etc any Category heading and hit Add Dialog.
8) From here for my purposes, I used TextBoxes A
9) Once you add it, click on it and observe its properties window. You will see Label, Property, and Value. Make a note of the property name as it will be used to store the data directly into the registry. *Note: there appears to be no way to perform data
validation using the built in textbox dialogs, users can enter whatever they want and move on.
10) Go to the registry editor on the same icon bar under solution explorer.
11) Specify your registry folder, make a new value (I used string) and name it whatever you like. In the value section enter the property label formatted as such [EDITA1] depending on your value.
12) Now when you run the installer for your project, it will take data into that field and place it into the registry provided it has access to that key with the permissions you run the program under.

Limiting 'For-Each' data entries

Similar Messages

Maybe you are looking for