Limiting Query View selections for Web reports
In web reports, users currently have Query View Selection but they want to be able to just see views that they have created and not all others.
How can this be done?
Does creating views in web and in BEX pull different auth objects or is it same? - Which objects are check in WEB views? Bex views use s_rs_comp with the QVW componenet.. but the trace does not show any log like this.
Hi,
User specific protection of queries are controlled by authorization object S_RS_COMP1.
Authorization RSZOWNER = "$USER" allows the user access to activities in all the components he is an owner of.
Check out this link, the analyst 3 scenario is what you are looking for:
http://help.sap.com/saphelp_nw04/helpdata/EN/41/05453caff4f703e10000000a114084/content.htm
Regards,
Zaheer
Similar Messages
-
Prerequisites for webi reports 4.0 to view in Mobile
Hi,
Please can anyone provide me the details regarding Prerequisites for webi reports 4.0 and design studio 1.2 (like Server requirements,Bo Mobile requirements,supported components ) to view in Mobile .
Thanks in advance,
Regards
SushmaDid you check the admin guides (available here: Business Intelligence – SAP Help Portal Page) ?
For example,
Design studio: http://service.sap.com/~sapidb/011000358700000146402014E/ds12SP01_admin_bip_en.pdf -Chapter 5.4 -
SAP BW query view deletion in Web/ "Delete Query view" in web
Dear All,
We are using the standard template: BW web analyzer (0ANALYZER). In this standard template, SAP provided two links "Save View" and "Open View" for creating new query views and opening existing query views respectively. However, no oppurtunity was provided to "delete query views".
We would like to have an oppurtunity to delete the query views as well from Web. (currently we are deleting the unwanted query views from Bex analyzer, as per the request from business users - who have access only to the web reports).
Would be great if you can suggest some solution to this problem.
By the way, We would not like to use the standard "Query view selection" web item. (as it creates user specic local views only).
best regards.Hi atlaj
There is a Function Module called
CALL FUNCTION 'RZX2_OBJECT_DELETE'
you can make yourselves a little ABAP with.
Hope this Helps.
Best Regards
Armin Baggenstos -
Query View Selection - Filter by owner
Hi
I'm using BW 3.5 and have the Query View Selection Web Item in my template.
I want to show in this web item only views from the user created them - the current user should only see the views he created and not all.
How is this possible?
Thx
RogerHi Roger,
You can acheive it in authorization object S_RS_COMP1.
Activity: *
Name (ID) of a reporting compo: *
Type of a reporting component: Query View
Owner (Person Responsible) for: $USER$
He will be having access of his view only.
Regards,
Kams -
Query views - selection screen fields double
Hi expects,
BW 3.5 SP13.
Do you know why I have double fields in WEB report selection screen ? example Month/year ?
In WEB properties I flag 'Display same variables only once'.
I have a WEB report with one table based on a query and with two charts based on query views from the query. Some fields are mandatory in selection screen Month/year.
Br,
Ole PaludanHi,
It's query views based on same query also use in WEB report, so variables are the same.
Query view Purpose: to get fewer key figures to charts - but still by query show all key figures in table.
BR,
Ole -
Prompt used as view selector for multiple reports
Hi All,
Can a dashboard prompt be used as View Selector for multiple reports? If yes, please let me know how?
Thanks
SumitaHi Sumita,
You can do this with Dashboard prompts, but it's a little tricky. I'll highlight the process below. Keep In mind I assume you have three reports already created and have three views: View 1, View 2 and View 3.
Phase I: The Dashboard Prompt
1. Create a new dashboard prompt.
2. Add any single column to your prompt. It doesn't really matter which one (just make sure nothing is prompted on it to be safe).
3. For the sake of this example, I'll assume we added column: "Test Folder"."Test Field"
4. Make sure your Operator is "is equal to/is in"
5. Make sure the control is "Drop-down List"
6. Change the Show to "SQL Results"
7. Write a SQL statement similar to the following (TEST =<your subject area>, "Test Folder"."Test Field" = <your column>):
SELECT CASE WHEN 1=2 THEN "Test Folder"."Test Field" ELSE 'View 1' END
FROM TEST
UNION
SELECT CASE WHEN 1=2 THEN "Test Folder"."Test Field" ELSE 'View 2' END
FROM TEST
UNION
SELECT CASE WHEN 1=2 THEN "Test Folder"."Test Field" ELSE 'View 3' END
FROM TEST
**Note: The reason why we need to do the CASE statement is because every logical query needs at least 1 presentation column. The case statement is a way to include the presentation column, but since the statement 1=2 is never true, we always use the ELSE condition.
8. Set a presentation variable. Call it VIEW_PVAR
9. Have the Prompt default to Specific Value: View 1
10. Save the Dashboard Prompt and put it into the Dashboard with your reports.
Phase II: Filter Reports
1. Create a new Answer request
2. Bring in your test column twice
3. Change the formula (fx) on the second column to be: '@{VIEW_PVAR}{View 1}'
4. Now add a filter to the presentation variable column
5. Set the operator to "is equal to/is in' and set the value to: View 1
6. Save the Request as "View 1 Filter"
7. Change the value in the filter to: View 2
8. Save the Request as "View 2 Filter"
9. Change the value in the filter to: View 3
10. Save the Request as "View 3 Filter"
Phase III: Guided Navigation
1. Create three sections in your dashboard
2. Rename each section to: View 1, View 2 and View 3 respectively
3. For each of the sections, do the following:
3a. Click on properties
3b. Click on Guided navigation
3c. Set the Guided Navigation to the appropriate Filter report
4. For each of the three sections, do the following:
4a. Add in all three requests
4b. Click on the request properties and select Show and the appropriate view for that section
5. Save your changes to your Dashboard
Good luck and if you found this post useful, please award points!
Best regards,
-Joe -
Execution time for web reports
Hello every one,
How to calculate execution time for web reports, for query execution we will go through RSRT, by giving query name and press execute + Debug button then select statistical data & Do not Cache buttons then press enter, after getting output press on back button, we will get duration of the query.....
But my question is , can we calculate execution time for webreport, if so can you please guide me.
and can you also tell me , if there is any RRI for one report, how to calculate execution time for these queries.
Ex : Query ABC have XYZ as its drilldown report , i need to calculate execution time for XYZ report via ABC report.
Thanks in advance,
Best Regards.
NP.Hi,
For reports executed in java web you can add the parameter &PROFILING=X
to the URL in order to record the execution time. Please have a look at SAP note 1048691 for further information.
Best regards,
Janine -
Hello,
I am working with Bex 3.5 WAD. How do i make use of the web item "query view selection". It is not working properly for me. Is there any document that i can follow to create a web template using the above web item. Please advise.hello Gillian,
I looked at that link before. I am able to use query view selection bex in my web template and the query drop down box is being populated by all the query views created for the query and i have given a table (table_1) as the affected web item. When i publish my template i can see the query view drop down box with the list of query views and the table. When i select one view the table is showing the results for that view, but when second view onwards the data doesn't change? what am i doing wrong. below is my html code.
<object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="GET_ITEM"/>
<param name="NAME" value="ITEMVIEWDROPDOWN_1"/>
<param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_VIEW_DROP_DOWN"/>
<param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
<param name="WIDTH" value="20"/>
<param name="VIEW_DD_TARGET_ITEM" value="DP1_table"/>
<param name="VIEW_DD_RRI" value="X"/>
<param name="VIEW_DD_USE_ALL_QUERY_VIEWS" value="X"/>
<param name="VIEW_DD_DESCRIPTION_I" value="B"/>
ITEM: ITEMVIEWDROPDOWN_1
</object>
<object>
<param name="OWNER" value="SAP_BW"/>
<param name="CMD" value="GET_ITEM"/>
<param name="NAME" value="DP1_table"/>
<param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
<param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
ITEM: DP1_table
</object> -
Query retrieval limit for discoverer reports in oracle applications
Hi,
I would like to set the query retrieval limit for discoverer reports in oracle applications. Can i have the steps for the same?
Cheers
MaytasHi Maytas
As Michael said the query retrieval limit can be defined by Discoverer Administrator
like :
- Discoverer Administrator >> Tools >> Privilege >> Select the user that will see the workbook >> Query Governor tab and there you setup the query retrieval limit.
Note:
Normally if you defined the limit for the user via Discoverer Administrator it should work but i saw that this was not happened in my case when i open Viewer so i entered with my eul owner on Discoverer Plus and defined the limit for all the workbooks
Tools >> Options >> Query Governor >> Limit Query retrieved data to
Regards,
Dani -
Displaying name of the Used Query-View in a Web Template
Hello Experts,
I am using a Query View as Dataprovider in a Web Template.
Now I would like to display the name of the View.
But with a Text Element this isn't possible.
You can only display the name of the Query.
Is there a way to display the name of the used Query-View?
Thank you for your help.
D.KramerHi Sumit,
hi Björn,
thank you for your hints.
We use a template to enable users to create Views.
So its dynamic.
That way we don't know the Name of the Views in advance.
(So putting the text into 'Title' is not possible)
We already use the "Query View Selection". This works out for users that are able to see different Views. (Power User)
But is it also possible to display the Query View Name in an Item or with html methods for those templates where there is only one View (as dataprovider) we don't know in advance?
Thanks again.
D.Kramer -
Authorizations for WEBI report based on BPC data model
Hi All,
We are strugelling with setting up authorisations for the reporting on BPC data model.
We created Bex query on top of Multiprovider that consists of BPC cube. The Bex query is source for WEBI output. The authorisations has been set up on BPC data model (cube) in BPC application but they are not passed nor to Bex query nor to Webi. Example: The query is build on top of OPEX BPC data model, this data model is restricted based on Oranizational Unit. My test user is allowed to see only Org Unit = 'Australia' in the OPEX BPC data model, however when I'm running the report I can see absolutely everything.
We are not connecting/using any BI cubes itself for this reporting. We are intrested only in the WEBI report based on BPC data models.
We were trying to use BPC data model (without any extra settings) as the source for BEx report, we were also trying to use virtual BPC data model as the source for Bex transient query - but non of these have helped.
Can you please advise how the authorisations should be set up for WEBI reporting on BPC data models?
KasiaAnybody can help with this issue please?
-
Hi
I am not able to find Interactive View Mode for WEBI in BI LaunchPad's Preferences. It used to be there for BOXI R3. Is this feature has been revoked by SAP in this new release. Please confirm and clarify. Thanks!!Hi,
In BI 4.0, We don’t have the option of Interactive mode, the only modes for viewing WebI documents are as follows:
1) Web: it is similar to the Interactive mode in XI 3.1. It means that you will use the HTML interface in BI launch pad to create, edit and analyze documents.
2) Rich Internet Application: This is similar to the Java Report Panel in XI 3.1.
You are using the Java interface in BI launch pad to create, edit and analyze documents .
But this requires the download of a Java applet.
3) Desktop (Windows only): in this case you are using Web Intelligence Desktop to create and edit documents, a standalone interface that works outside the BI launch pad. But this requires an install on your local machine.
4) PDF: Same as in BO XI 3.1
All view modes except PDF, have "Reading" and "Design" mode.
When you view a WebI document, the default mode is "Reading".
When you modify a WebI document, the default mode is "Design".
The user should use the modify option or view > Design, if he wants to modify a report. -
The action cannot be performed error for Webi Report
HI,
I am getting the error The action cannot be performed error for Webi Report. I am getting this error after i save the report and open it again.This is happening for only 1 particular report. In the end i removed some of the objects from the query and added some new ones.
Strangely it worked! -
Hi,
Just busy defining authorizations for web reports based on BEx queries. In the role is the S_TCODE=RRMX REALLY needed? And if so does that entail that the users can use BEx query designer as well?
Thnx for thinking.Thnx.
Do you refer to the "change local/global definition" in "excel" via the BEx query designer? Because that is the functionality that I would like to restrict, web access only.
By different "auth objects" you refer to the S_RS_COMP etc?
Thnx in advance. -
How to make Management of row level restrictions easy for webi reports?
Hi all
Our BO Product version is 12.3.0.601 (BO 3.1)
We are applying row level security for webi reports at universe level...
Since Universes are more in Number we have to create same restrictions and apply it to the users lets take a restrictions on region....which is common across all universes.
So the problem lies with the management of restrictions created at universe level.
Can we have a setup in where we can centralized the restirctions at a place so that management would be easy ......???
Shall we have to import the roles(restrictions) from R/3 or BW or Database level...?
Then how we will restrict our report (webi) to a region?????
So basically webi reports should run with the restrictions lets say region....How we will achieve this?/
Thanks and Regards
Ritu RajHi,
what is your Datasource?
If its SAP BW i would highly recommend you use the SAP Authentication in your BOE XI 3.1 So the users log into BOE with their SAP Username and Password and than the Data restriction of your BW takes place when the users run their Reports.
Informations on how to confiure the SAP Authentication you will find in the installation Guide of the SAP ITK.
Regards
-Seb.
Maybe you are looking for
-
Please help! I updated safari and yes it is an older desktop, but now all of the sudden tabs I have open will freeze on me. I can see what is going on, but am unable to type anywhere on the page! I have to shut down safari and then open up a whole ne
-
How can I add an image to my pop up text box built in Fireworks?
Hello all, I have already built my page (a map) with all the pop up text boxes in Fireworks and imported them into my Dreamweaver page, but I would like to add an image in that same pop up box as well as the text. I tried going back to Fireworks and
-
it does no good to send info to my acct. cause I can't access it . that is my problem!
-
The Vendor column in FAGLL03 item line display is empty
Dear Experts, Could you tell me is it possible to make the vendor column with figure in FAGLL03 item line display? Pls refer to the sreenshot as below, the vendor column is empty, I don't know why? Thanks! Cindy
-
Summary - please help me!
Hello everyone Please help me. I am designing a project cost report in Crystal Report. the following details will be on my report. item Code, Description, Projected Cost, Total Purchase, Left to complete. Let me give you brief detail about my tables.