Limiting the size of a directory

I'm under the impression it's possible to create limitations on directory sizes via workgroup manager
what I'm not sure of is exactly how this limit is applied
is it applied via user restrictions in their subscription to the domain? i.e. if it's a shared directory is the rule applied via the profile of the clients who connect? or is it determined via the profile of the host?
I have a shared directory, but no domain (currently, it's a project for the future). I'd like to limit the size of this directory (it's for our workflow, kinda arbitrary but it helps with the human processes).
Can I subscribe just the sharing host to a domain and force restrictions upon the directory that way?
While writing this out it occurred to me I can probably subscribe the host to a domain and have the remote users authenticate via a local user that is a member of the domain and thusly has the directory limitations - but maybe there is a more straightforward way to go about this?

sarcasteak wrote:
Hi all,
I have an issue where a file may be written to by a string object, I doubt it. String objects don't write to files. You mean you're going to write a String object to a file?
but the document as a whole cannot exceed ~30K. This one string makes up the majority of the size of the document. It is used to bring back plugin installation information from eclipse. Any suggestions?You can count bytes, being careful that you either know that the String contains only 1-byte characters, or counting the bytes in each character. Or you could sum up the results of subsequent write() calls, and stop when you get to 30 KiB. Whatever approach you're going to take, you're going to have to decide what to do when the data that's intended to be written exceeds your limit. If you cut it off prematurely, what's read back in might not be valid by the semantics of that string.

Similar Messages

  • Ken burns cropping in iMovie 9.09 changed with mavericks update.  Cant zoom in to a small area....it limits the size now.  How do i get back to the old way?

    Ken burns cropping in iMovie 9.09 changed with mavericks update.  Cant zoom in to a small area....it limits the size now.  How do i get back to the old way

    These timezone definition changes are fairly common, when viewed world-wide.
    For notifying Apple, contact the folks at the Apple Support Center or (if you have access) log a bug report.  (The folks at Apple might or might not notice any postings made here.)
    For the immediate case, updating the timezones yourself is straightforward; the sequence is basically the same on Linux, OS X, Unix and even OpenVMS.  Ugly, but it works.  (The US folks got to see this mess first-hand a few years ago, but there are other locations that see these sorts of timezone definition changes far more often.)
    For those following along that aren't familiar with this sequence, this old posting should get you close when rebuilding your definitions, though the timezone database has moved to IANA.

  • Exception While Limiting the Size of JTextArea

    Im using a JTextArea for logging. For that i ve limitted the size/length of JTextArea by overriding the insertString method to avoid OutOfMemoryError.
    Here is the code:-
    public void insertString(int aOffset, String aStr, AttributeSet aAttr)
    throws BadLocationException
    if (availableSpace() < aStr.length())
    remove(0, aStr.length() > getLength() ? getLength() : aStr.length());
    theDocument.insertString(getLength(), aStr, aAttr);
    Everything seems to be working except that sometimes i get the following exception:- (Anybody any idea about this. its urgent i m stuck)
    java.lang.ArrayIndexOutOfBoundsException
    at javax.swing.text.BoxView.getOffset(BoxView.java:1022)
    at javax.swing.text.BoxView.paint(BoxView.java:402)
    at javax.swing.text.WrappedPlainView.paint(WrappedPlainView.java:349)
    at javax.swing.plaf.basic.BasicTextUI$RootView.paint(BasicTextUI.java:1248)
    at javax.swing.plaf.basic.BasicTextUI.paintSafely(BasicTextUI.java:565)
    at javax.swing.plaf.basic.BasicTextUI.paint(BasicTextUI.java:699)
    at javax.swing.plaf.basic.BasicTextUI.update(BasicTextUI.java:678)
    at javax.swing.JComponent.paintComponent(JComponent.java:537)
    at javax.swing.JComponent.paint(JComponent.java:804)
    at javax.swing.JComponent.paintChildren(JComponent.java:643)
    at javax.swing.JComponent.paint(JComponent.java:813)
    at javax.swing.JViewport.paint(JViewport.java:707)
    at javax.swing.JComponent.paintChildren(JComponent.java:643)
    at javax.swing.JComponent.paint(JComponent.java:813)
    at javax.swing.JComponent.paintWithOffscreenBuffer(JComponent.java:4735)
    at javax.swing.JComponent.paintDoubleBuffered(JComponent.java:4688)
    at javax.swing.JComponent._paintImmediately(JComponent.java:4632)
    at javax.swing.JComponent.paintImmediately(JComponent.java:4464)
    at javax.swing.RepaintManager.paintDirtyRegions(RepaintManager.java:410)
    at javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(SystemEventQueueUtilities.java:117)
    at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:443)02:14:56:941 Thread-9 .DefaultBufferedDocument.--------- Full Removing---------
    02:14:56:943 Thread-9 .DefaultBufferedDocument.theSize = 4096
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:191)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:144)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:138)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:130)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:98)

    I am getting EXACTLY the same exception thrown from EXACTLY the same place. I am using a JEditorPane to display HTML text. Problem occurs randomly.
    Everything works fine on Java 1.3.x. Fails on 1.4.x.
    Here is the stack trace:
    java.lang.ArrayIndexOutOfBoundsException
    at javax.swing.text.BoxView.getOffset(BoxView.java:1022)
    at javax.swing.text.BoxView.childAllocation(BoxView.java:669)
    at javax.swing.text.CompositeView.getChildAllocation(CompositeView.java:215)
    at javax.swing.text.BoxView.getChildAllocation(BoxView.java:427)
    at javax.swing.plaf.basic.BasicTextUI$UpdateHandler.calculateViewPosition(BasicTextUI.java:1780)
    at javax.swing.plaf.basic.BasicTextUI$UpdateHandler.layoutContainer(BasicTextUI.java:1756)
    at java.awt.Container.layout(Container.java:835)
    at java.awt.Container.doLayout(Container.java:825)
    at java.awt.Container.validateTree(Container.java:903)
    at java.awt.Container.validateTree(Container.java:910)
    at java.awt.Container.validateTree(Container.java:910)
    at java.awt.Container.validateTree(Container.java:910)
    at java.awt.Container.validateTree(Container.java:910)
    at java.awt.Container.validateTree(Container.java:910)
    at java.awt.Container.validateTree(Container.java:910)
    at java.awt.Container.validateTree(Container.java:910)
    at java.awt.Container.validateTree(Container.java:910)
    at java.awt.Container.validateTree(Container.java:910)
    at java.awt.Container.validateTree(Container.java:910)
    at java.awt.Container.validateTree(Container.java:910)
    at java.awt.Container.validate(Container.java:878)
    at javax.swing.RepaintManager.validateInvalidComponents(RepaintManager.java:347)
    at javax.swing.SystemEventQueueUtilities$ComponentWorkRequest.run(SystemEventQueueUtilities.java:116)
    at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:178)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:443)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:190)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:144)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:138)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:130)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:98)
    Darren.

  • To Limiting the size of the attached document in a "Purchase order"

    Does anyone knows how to limit the size of the document indexing in an "Purchase order"?
    Let me explain:
    By the tcode me23n I can create an annex to attach a file to the Purchase order,
    right now there is no limitation on the size of it,
    is there any way to limit that someone attach a giant file to a purchase order and leave me the Database trembling?
    thanks in advance.

    No cross posting
    Read the "Rules of Engagement"

  • How to limiting the size of an existing Sparse Bundle for Time Machine?

    There seems to be a solution for locking the size of a new sparse bundle to be used for Time Machine backups (see https://discussions.apple.com/thread/2383738?tstart=0).  However, I have a Time Machine sparse bundle with a year's worth of history that is getting very large and I would like to limit its size.  Is there a way to constrain the size of an existing sparse bundle without trashing it. 
    Appying the suggested techniques"
    hdiutil resize -size 300g xyz.sparsebundle
    and
    SetFile -a L PATHTOSPARSEBUNDLE/Info.*
    on an existing sparse bundle somehow corrupts it and TM wants to start from scratch. 
    A method for constraining the size of a TM sparse bundle without trashing it would be very appreciated.

    budden10, please try this:
    Disconnect the external drive to simulate it not working or having failed
    Open Time Machine on your Mac and wait a few minutes for your backups to load fully
    Go back in time and select a date when you were backing up the external drive
    Now look at the Finder window and locate your Mac on the left side of the window under DEVICES
    Click on your Mac
    What do you see in the window there just to the right?

  • New version of Thunderbird has limited the size of the drop-down that shows my open emails. How do I change it back to show all open ones?

    There is an icon in the upper right corner that, when clicked on, drops down a list of open emails (i.e. a list of tabs). In the previous version of Thunderbird it would expand (vertically) to list all emails. However now it is a set vertical size and this is terrible and basically defeats the purpose. The purpose of that drop down was so that I did not have to scroll through all my open tabs to find an email. Now I have to do that again, as it is a set vertical size with arrows up and down to scroll through the list. How do I get the old functionality back, or solve my problem of somehow seeing a list of all open tabs? Thanks!

    Is there a setting in about:config that controls the length of the alltabs list? I would look for such a thing, and change the setting if it is there. A setting of -1 should make it limitless.

  • Guys, can anyone help me with limiting the size of the LogFiles OAS 10.1.2

    I have these log files growing bigger and bigger
    OracleAS/opmn/logs/OC4J~home~default_island~1
    OracleAS/j2ee/home/log/home_default_island_1/default-web-access.log
    Our OC4J instance is called 'home'
    I just would like to know if we can mention rotation of these log file size anywhere. It grows too big and we have to stop and restart the server again.
    Thank you for your help

    I believe this bit of documentation directly answers your question:
    http://download-west.oracle.com/docs/cd/B14099_19/web.1012/b14011/advanced.htm#i1027867
    Mike.

  • Camera raw 6.5 limiting crop size

    When I load up a raw image in camera raw 6.5, CS5 - the cropping tool suddenly is not working correctly
    It limits the size of the crop that I can do.  I used to be able to surround the entire image with a crop and then edit it smaller on each of the  sides as needed.  But now, for some reason, it will not let me capture the entire image - only lets me highlight about 3/4 of it.  This is true for all my raw images - even ones that previously had no problems
    any ideas?

    Updates are grayed out in photoshop - don't know why.  Even removed the 1.0 directory in App Data which was supposed to bring it back to being non-gray - but it did not.  So no, I can't even update.
    However, I have two laptops - clones of eachother - the crop is still working perfectly on the other one.  So, I thought maybe the copy with the crop problem had corruption - so I deactivated, removed and then reinstalled a fresh copy.  But still the same problem.
    When I go to crop - it will not let me crop the whole image - only about 3/4 the size of any image...?
    Other ideas?
    keg

  • Limiting the Text Size in CRM 5.0 IC Web Client

    Hello Experts,
    We have a scenario where in we can enter the text for a CRM Document (say Service document) in the text field of IC Web Client. We have noticed that we are even allowed to enter the text of size around 73 MB also (which comes into 1000s of Word Documents).
    We have now have a requirement for limiting this text as it is causing some problems and somehow affecting system performance.
    Could anyone help me in limitating the text size in CRM 5.0 IC Web Client. I mean whether there is any configuration setting for doing the same or we need to do it in any text determination Procedure. Thanks in anticipation for your response.
    Best Regards,
    Kishore K

    Kishore,
    Use below code to determine no of characters typed in FoUpText.htm:
    data: col_wrap type ref to cl_bsp_wd_collection_wrapper,
          lr_entity type ref to if_bol_bo_property_access,
          lv_str type string,
          lv_len type i.
          col_wrap = typed_context->BTTEXT->get_collection_wrapper( ).
          lr_entity ?= col_wrap->get_current( ).
          lv_str =  lr_entity->get_property_as_string('CONC_LINES').
          lv_len = strlen( lv_str ).
    Place this code in controller FoUpText.do anywhere accordingly
    Cheers,
    Ankur

  • What are the size limitations in Predictive Analytics - regression charts

    I'm trying to display the trend chart for an Exponenential Regression Prediction and I got the following error.  The Regression itself runs OK and provides a summary, but I can't display the data on a chart.
    There's only 1 other related posting- Error PAS10066 and it doesn't provide much more info than is in the error itself.
    Does anyone have extra info on what the size of the limitation is?  Is it something that can be overcome with extra RAM etc?
    I'm using the desktop version of PA 1.19, and I'm on a 64 bit installation of Windows 7 with 8GB of RAM, processing a csv file with 1.1 million rows.
    I've used some filters in the Prediuct workflow to cut down on the amount of data being processed, and I got past the PAS10066 error and am now getting a max call stack size error - can't find anything related on SCN for this one.
    Many Thanks
    Astrid

    Hi Astrid,
    Thanks for reaching out.It could be a out of memory issue.
    If you increase the memory that SAP Predictive Analysis is allowed to consume.
    Go to the location where SAP Predictive Analysis was installed. In my case it is:
    C:\Program Files\SAP Predictive Analysis\Desktop
    Here you find a file "SAPPredictiveAnalysis.ini" - open this in Notepad and change the
    "-Xmx" parameter to approximately half of our PC/laptops memory.
    For instance in your case you could try with: -Xmx4096m
    I have outlined this is a few more steps here:
    http://scn.sap.com/message/15099575#15099575
    Hope it works for you.
    Best regards,
    Kurt

  • Is there a limitation on the Size of Attachments to SBO Documents?

    Hi, Experts.
    Is there a size limitation to the Attachments that you can Attatch to an SBO Document like an Activity?
    Does this depend only on the Hardware Specifications, or does SBO also limit the Size of Attachments?
    Any help would be appreciated.
    Thanks,
    Marli

    Hi Marli,
    There is no limitation on the size of attachment. Otherwise also, SBO stores only the name of the file and copies it to the attachment folder. Since, in SBO, only the name is stored, therefore the size of the attachment does not matter.
    Rahul

  • How to know the size in bytes of a directory?

    I would like to know if there's a class or a function which allows to know the size of all files in a directory?

    You have to create a File object for your directory, then list all files (using the list() method) and create a File object for each item returned. Then ask each File object for it's size and add them up.
    Thomas

  • Can we  increase the size of column alias which is limited to 30

    In simple words
    select ename as "alias having more than 30 characters here" from emp;
    CAn it be executed correctly somehow?

    The size of a column name is limited to 30 and there is no workaround to increase it in SQL.

  • Limiting the file size on Export Action

    Hi,
    Is there an easy way of limiting the file sizes created by the Export action by simpoly stating the limit, for example 5MB?
    Thanks,
    Ronen

    But you can proxy it by knowing that, say, a JPEG at 3000 x 3000 at 90% quality will be about 5 Gigs. - example, figures not meant to be accurate. Or a Tiff at 1000 X will be.....

  • Limiting the message queue size

    I am currently trying to run the message broker so that each queue has a maximum size on the messages that are contained within it. However, when setting this value by the administration console, it is completely ignored and more messages are successfully added to the queue.
    I have also tried limiting the number of message in a particular queue, my problem is that when this limit is reached more messages are added and stored in the brokers memory, but not persisted. An error is still thrown by the broker, although this is a generic error which means there is no way of knowing if the message is in the queue or not which leads to duplicate messages being sent to the queue.
    Any help on configuring the size of a message queue via either method will be greatly appreciated.
    Thanks,
    James.

    Hello,
    Yes it is possible .
    From the ICM script and before you send the call to the queue , make a IF statement :
    SkillGroup.(Skill group Name).RouterCallsQNow<=15
    ABout the threshold i am not sure but the above if the calls in queue reached 16 you can send it to a play prompt then drop it.
    Amer

Maybe you are looking for