Line chart mis-match problem

I have 2 set of data, one has data from month 1-12,
1 xxx
2 yyy
12 zzz
and 2nd set has data from month 6-12,
6 aaa
7 bbb
12 ccc
when I create line chart, with month as x-axis, the 2nd set data has line on top of month 1-6, instead 7-12 as it should be. How can I fix this problem?

Hi,
I have not tested your code, but check these links. This might help.
http://blogs.adobe.com/flexdoc/2009/07/date_range_selection_for_flex.html
http://www.stretchmedia.ca/code_examples/chart_range_selection/main.html

Similar Messages

Jfreechart line chart mouse click problem

i need to implement a line chart where users can click on an area of the chart and highlight it, i have serveral questions regarding how to do this:
i added a mouselistener to the chartpanel, i can get the points with e.getTrigger().getPoint(), but I need the points associated with the graph point, is that possible?
i also need to highlight an area of the line chart, I have no idea where to begin, will i be able to change the background of a specific range of points?
help would be appreciated!!

Hi,
I have not tested your code, but check these links. This might help.
http://blogs.adobe.com/flexdoc/2009/07/date_range_selection_for_flex.html
http://www.stretchmedia.ca/code_examples/chart_range_selection/main.html

Re aspect ratio mis-match problem

I'm using motion with DVCPROHD 1080p24. So aspect ratio should be 1280 x 1080 (1.5)
As I'm doing an animation, media is coming in from stills camera... into photoshop and out into corel Painter and back again. Eventually I am getting square/rectangular problems. (Painter has no aspect settings and does not recognise this and puts everything back to square) So I usually reset the aspect in inspector to (1.5)
This last time, when clicking on the media and inspecting one sequence has come in at (1.5) but only looks in proportion when set to square ratio. If I set it to square, will there be any problems? So some media is square some (1.5) This sequence will go out again as an animation codec or frame sequence. What happens? could does this eventually end up a blur when it goes back to motion and then to fcp? Does this matter?

Dig deeper into to the settings of your TV. Under picture settings you should you should find a setting such as "HD picture size". Both of my Panasonics have it. Adjusting that setting should help you.
Joep42 wrote:
We recently upgraded to Xfinity's X1 box and there is a definite difference in the screen ratio aspect between HD channels and non-HD channels. On HD channels, people and things are stretched while on non HD channels, faces, people and objects appear normal. I gone through all the X1 settings, trying different combinations to no avail. Current video settings are: Zoom = Full, Resolution = 16.9, 1080p60 HD. I have tried all 16.9 resolutions, with Zoom On and Off - no help. My TV is a Smart Samsung UN55D6000 and is connected to the X1 box via an HDMI cable. My Samsung TV is set (in settings) to 16.9. Changing this setting to 16.9 Wide somewhat solves this problem but the Guide is cut off at the edges and some of the picture is slightly cut off at the edges. Note: This was not a problem with our old Cisco RNG200n. We simply used the remote and selected “stretch” and left it at there. Any suggestions? This problem may be a deal breaker. Thanks.

Display column values as a series/legend on a line chart where one column value can be more than one category

Hi Everyone
I don't know if this is possible or not, so I will describe it. I have a column in a table called Filing. There are currently three values in it ("Abuse", "Neglect", "Voluntary") and each record has this populated. I also have
the below slicer for the column also.
I would like to add a fourth value called "Abuse/Neglect" that would identify instances where both an Abuse and Neglect petition was filed, which is a subset of the Abuse and Neglect records in the Filing column.
My question is, is it possible to create a line chart that has the 4 Filing possibilities: "Abuse", "Neglect", "Voluntary", "Abuse/Neglect" as the Series/Legend in the line chart?
The problem is that there are records that are more than one category: Abuse or Neglect records can also be Abuse/Neglect.
Paul

Hi Paul,
According to your description, there is a column with the values ("Abuse", "Neglect", "Voluntary") in your table, now what you need to is that add another value "Abuse/Neglect" in this column, and then use it
as Series/Legend in the line chart, right?
In this case, you can add calculated column to your table based on your logic. A calculated column is a column that you add to an existing PowerPivot table. Instead of pasting or importing values in the column, you create a DAX formula that defines
the column values. The calculated column can be used in a PivotTable, PivotChart, or Power View report as you would any other data column. Please refer to the link below to see the details.
https://msdn.microsoft.com/en-us/library/gg413492%28v=sql.110%29.aspx?f=255&MSPPError=-2147217396
Regards,
Charlie Liao
TechNet Community Support

About Line Chart.

I already have a Line Chart and my problem is how to create a thick line in Line Chart.
Thanks,
Joe Ric

Hi Joe,
While in the Preview Mode, highlight the Line > Right-click the highlighted line and select Format Connector Line > Under Thickness choose a higher value.
-Abhilash

Transforming XML data into SVG line charts using XSLT

Hi
I am trying to transform revenue data from an XML file into an SVG line chart. The problem is that I am quite new to XPath and XSLT and whereas I can draw the grid for my chart I struggle drawing the lines using the data from the XML doc.
The XML look something like the one below, and I would like to have one chart for each product and in each chart having the time on the x-axis and chart the revenue by regions.
Any help on this is much appreciated.
Thanks
Peter
<?xml version="1.0"?>
<revenue>
<caption>
<heading>My title</heading>
</caption>
<date name="01/01/2003">
<region name="Asia">
<product_a>30</product_a>
<product_b>12</product_b>
<product_c>301</product_c>
</region>
</date>
<date name="02/01/2003">
<region name="Asia">
<product_a>32</product_a>
<product_b>12</product_b>
<product_c>301</product_c>
</region>
<region name="America">
<product_a>57</product_a>
<product_b>31</product_b>
<product_c>457</product_c>
</region>
</date>
<date name="03/01/2003">
<region name="Asia">
<product_a>38</product_a>
<product_b>12</product_b>
<product_c>301</product_c>
</region>
<region name="America">
<product_a>31</product_a>
<product_b>9</product_b>
<product_c>357</product_c>
</region>
</date>
<date name="04/01/2003">
<region name="Asia">
<product_a>33</product_a>
<product_b>12</product_b>
<product_c>301</product_c>
</region>
<region name="America">
<product_a>43</product_a>
<product_b>16</product_b>
<product_c>430</product_c>
</region>
</date>
<date name="05/01/2003">
<region name="Asia">
<product_a>36</product_a>
<product_b>12</product_b>
<product_c>301</product_c>
</region>
<region name="America">
<product_a>54</product_a>
<product_b>1</product_b>
<product_c>561</product_c>
</region>
</date>
</revenue>

You could try Jeni's XSLT utilities for SVG :
http://www.jenitennison.com/xslt/utilities/svg-utils.html
Specifically, the sample code provided, when a couple of SVG charts are being generated from XML data :
http://www.jenitennison.com/xslt/utilities/svg-example.html
Hope that helps.

Transforming XML data into SVG line charts

Hi
I am trying to transform revenue data from an XML file into an SVG line chart. The problem is that I am quite new to XPath and XSLT and whereas I can draw the grid for my chart I struggle drawing the lines using the data from the XML doc.
The XML look something like the one below, and I would like to have one chart for each product and in each chart having the time on the x-axis and chart the revenue by regions.
Any help on this is much appreciated.
Thanks
Peter
<?xml version="1.0"?>
<revenue>
<caption>
<heading>My title</heading>
</caption>
<date name="01/01/2003">
<region name="Asia">
<product_a>30</product_a>
<product_b>12</product_b>
<product_c>301</product_c>
</region>
</date>
<date name="02/01/2003">
<region name="Asia">
<product_a>32</product_a>
<product_b>12</product_b>
<product_c>301</product_c>
</region>
<region name="America">
<product_a>57</product_a>
<product_b>31</product_b>
<product_c>457</product_c>
</region>
</date>
<date name="03/01/2003">
<region name="Asia">
<product_a>38</product_a>
<product_b>12</product_b>Long postings are being truncated to ~1 kB at this time.

Instead of using SVG charting can I suggest that you look into digital charts. This service creates charts on the fly and is very easy to integrate with web applications.
Christopher
www.billboard.net

Problem - over lie of data series in Line chart (Web Application Designer)

Dear Experts,
I have created a chart with below requiments from my user by using web application designer.
1) Key Figure 1 (Chart type -> column )
2) Key Figure 2 (Chart type -> column )
3) Key Figure 3 (Chart type -> Line; color assigned -> BLACK;    Visibility: Visible)
4) Key Figure 4 (Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
5) Key Figure 5 (Chart type -> Line; color assigned -> RED;         Visibility: Visible/Hidden)
The line chart of Key Figure 3 must always appear in Front then others Key Figures.
Then following by, Key Figure 4. Last is Key Figure 5.
As I know the order of display line chart is infflucing by the order of Key Figure in structure by descending, likes below
1) Key Figure 3 (Rank of front -> 3rd; Chart type -> Line; color assigned -> BLACK;    Visibility: Visible)
2) Key Figure 4 (Rank of front -> 2nd; Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
3) Key Figure 5 (Rank of front -> 1st; Chart type -> Line; color assigned -> RED;         Visibility: Visible/Hidden)
So, I have conflict on fulfilling these 2 request on assigning the color and control their visibility and lines over lie.
Please advice me if you have any suggestion on controlling the lines order.
Thanks!
~ GP
Edited by: GP Poh on Jun 9, 2010 12:32 PM

Hi Priya, thanks for input.
I think I should further elaborate the problems. Thanks for your highlight.
I have a lines chart with five key figures. So my chart will have five lines.
Some lines from chart will overlap if the data are same.
When overlapping of lines happens, I want to control the order of which series should be appear first.
Likes below example,
1) Key Figure 1 (Chart type -> column )
2) Key Figure 2 (Chart type -> column )
3) Key Figure 3 (Chart type -> Line; color assigned -> BLACK; Visibility: Visible)
4) Key Figure 4 (Chart type -> Line; color assigned -> YELLOW; Visibility: Visible/Hidden)
5) Key Figure 5 (Chart type -> Line; color assigned -> RED; Visibility: Visible/Hidden)
           KF1 KF2 KF3 KF4 KF5
CW 1    30     30    80    80    50
CW 2    40     50    90    60    90
CW 3    70     50    90    90    90
CW 4    80     70    70    90    70
As you can see, there is overlap in these value.
CW 1 KF3, KF4 -->80
CW 2 KF3, KF5 --> 90
CW 3 KF3, KF4, KF5 --> 90
The order which i want the series should appear first when overlapping.
- KF3 must appear on top.
- Then, follow by KF5
- Last is KF4.
So now, i have no idea to control the overlap orders except adjusting the sequence of keyfigure from query.
Feel free to give me any input!

Line chart with more than 15 data series - color problem

Hi all,
I've built a line chart with 32 data series (user can control, which of them are displayed at a time). For series 16 to 32 I did manipulate the URL in the browser directly, because Application Express does only display parametrs for up to 15 series. This works fine so far except of displaying the colors. For each sieries I defined a different color. 29 of my 32 series are displayed in the desired color. But series 29, 31 and 32 are displayed in a default-color (#0099CC). It seems that this is a SVG-problem. In the SVG-source I find the wrong color. When I export my application, I see the right color.
Thanks for help,
Chris

Hello,
Which version of APEX are you using?
Go to your Flash Chart attributes - get into your series (click the icon) in the section of Series Query you'll find the maximum rows.
Regards,
Dimitri
-- http://dgielis.blogspot.com/
-- http://apex-evangelists.com/
-- http://apexblogs.info/

HTMLDB Line Chart Problem in Version 2.0

After upgrading to 2.0, several of our line charts stopped rendering.
It seems that if a datapoint's value is equal to zero, the line will not render.
However if I filter out all records > 0, then the chart works fine.
I requested a workspace(OTN) and tried it out there and ended up with the same results.
Is this bug in the charting engine or am I missing something?? Thanks for any help.
- George
Steps to reproduce:
CREATE TABLE TEST01
(MONTH     VARCHAR2(15),
JCOUNT NUMBER);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('OCT-04',30);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('NOV-04',40);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('DEC-04',30);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('JAN-05',145);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('FEB-05',60);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('MAR-05',50);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('APR-05',161);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('MAY-05',82);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('JUN-05',177);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('JUL-05',213);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('AUG-05',122);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('SEP-05',140);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('OCT-05',70);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('NOV-05',67);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('DEC-05',27);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('JAN-06',46);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('FEB-06',31);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('MAR-06',17);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('APR-06',15);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('MAY-06',9);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('JUN-06',5);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('JUL-06',5);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('AUG-06',1);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('SEP-06',5);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('OCT-06',0);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('NOV-06',0);
INSERT INTO TEST01 (MONTH,JCOUNT) VALUES('DEC-06',0);
ADD A REGION TO PAGE CONTAINING A LINE CHART;
HERE'S THE SELECT:
SELECT NULL LINK,MONTH,JCOUNT FROM TEST01;
MAKE SURE TO SET THE MAXIMUM RECORD COUNT TO 50;
THEN RUN THE PAGE
EXPECTED RESULTS: LINE CHART WILL RENDER
ACTUAL RESULTS: LINE CHART DOES NOT RENDER

Looks like a bug. Oracle may be aware of it. The best workaround I could come up with is adding a very small amount to your value (JCOUNT).
SELECT *
FROM (SELECT NULL link,
               month,
               CASE WHEN jcount = 0 then .00001
                    ELSE jcount END jcount
          FROM TEST01
         ORDER BY TO_DATE(month,'MON-RR'))Only problem you have with this is if you display data point values. The value for zero JCOUNTs will display as .00001. You can work around that by picking a format mask for the "Data Label Format" value for your series.
Mike

Problems with the line chart - dashboard

I have a problem in the line chart in the dashboard SP4.
Clicking on the legend of the graphic , the serie (line) disappears. Clicking again in the legend, the line appears but the markers don’t.
Someone knows how to solve this problem?
Follow the examples.
Thanks.

Hi Jane,
This is definitely the tool problem.
Might be you can try restarting xcelsius or your computer (sometimes it works, really !)
Just out of curiosity, why do you want to clink on legends.

Problems with SVG line charts based on PL/SQL returning SQL

Dear all - I wonder if anyone can tell me whether this problem is likely to be fixed at some point?
It relates to the fact that you can't get more than one series on a chart where the SQL is returned from PL/SQL.
It is a huge issue for us when trying to create complex, dynamic charts, which are simple enough in PL/SQL, but end up quite nightmarish in pure SQL.
Although we have implemented Maani SWF (Flash) charts as a workaround, users don't like them as there's no 'save as...' or copy+paste and they seem to print very badly indeed.
Here's part of a post from last May with more detail:
"If I take a really simple table like this:
CREATE TABLE "CHART_TEST"
( "X" DATE NOT NULL ENABLE,
"Y" NUMBER(5,0) NOT NULL ENABLE,
CONSTRAINT "CHART_TEST_PK" PRIMARY KEY ("X") ENABLE
and populate it with:
X Y
2006-01-01T00:00:00 1
2006-02-01T00:00:00 2
2006-03-01T00:00:00 3
2006-04-01T00:00:00 4
2006-05-01T00:00:00 5
2006-06-01T00:00:00 6
2006-07-01T00:00:00 7
2006-08-01T00:00:00 8
2006-09-01T00:00:00 9
2006-10-01T00:00:00 10
I can create a chart with a single series using syntax something like:
begin
return 'select null link, x label, y value
from chart_test';
end;
and this works fine. However, if I add a second series:
begin
return 'select null link, x label, (y + 1) value
from chart_test';
end;
then the whole of the chart region blanks out.
There's an example at:
http://htmldb.oracle.com/pls/otn/f?p=15491:1"
Many thanks,
John.

On some, but not all SVG line charts, I had trouble when some values are ZERO.
Putting a CASE WHEN var = 0 then 0.05 ELSE var END in the select statement
fixed those situations.
I had missing lines when the number of data points in a series exceeded the default number of 15, and I did not set in the series configuration to a number equal to or higher that the number of data points in that series.
And I had one instance, where a couple missing lines reappeared when I exited
the browser and app completely and restarted the app.
All these comments apply to ver 1.6x and 2.0x

Problems with line chart rendering

Hi.
I have some problems with a line chart with 2 series.
I have the folowing series:
SELECT null link, t.column_value eticheta, EVM_REPORT.ACTUAL_COST2(:P37_PROJECTID, t.column_value) valoare
FROM TABLE(utils.table_for_iteration(
to_date('2007-05-20', 'yyyy-mm-dd'), sysdate)) t
SELECT null link, t.column_value eticheta, 7 valoare
FROM TABLE(utils.table_for_iteration(
to_date('2007-05-20', 'yyyy-mm-dd'), sysdate)) t
function table_for_iteration(param_start in date,param_end in date) return DATE_ARRAY PIPELINED AS
BEGIN
FOR i IN 0 .. (param_end - param_start)
LOOP
PIPE ROW(param_start + i);
END LOOP;
RETURN;
END table_for_iteration;
FUNCTION actual_cost2(in_project_id in number, end_date IN DATE) RETURN number AS
begin
return 2;
end actual_cost2;
The chart does not display (at all). If i replace EVM_REPORT.ACTUAL_COST2(:P37_PROJECTID, t.column_value) with some value, it displays.
Any ideea ?

Hi,
Do you mean point the partial trigger to the surrounding container? I have tried that but it makes no difference. I am almost certain that the problem is associated with the forEach component as if I have exactly the same structure but without the forEach then the ppr works fine.
Thanks for your help on this,
Dave

Copy Excel Chart into Illustrator: Problem with dotted lines

Copying an excel chart (2010 and/or 2013, Windows 7 Ultimate) to Illustrator CS6 works okay if line chart lines are solid... but if they are dotted, then in Excel 2010, the dotted line becomes jumbled, and in Excel 2013, the dotted line converts to a solid line... is the only solution to this to save the exel chart as a pdf, or is there another workaround?
Essentially, I am creating a chart in excel and adding a few notations and graphic elements in illustrator for professional publishing...
any help would be appreciated... thanks

This is a follow-up (somehow, my original question was logged under OOBIMICHAEL):
I finally broke down and bought a MacBook Pro, installed CS6 and Office 2011... and voilà... dotted lines copy from excel to illustrator just perfectly... this is a bit like copying data from Visio to Word, etc... these programs render graphics in very different ways... other than the Mac solution, I also tried the Libre Suite (open source)... which also worked perfectly to copy excel data with dotted lines to illustrator... so, until MS and Adobe actually collaborate together to provide value to its customers, the alternative seems (1) open source, (2) buy a Mac...

Problem in editing legend label of line chart

Hi,
I am using crystal 2008 and deploying reports in Java appilication.
I have a report with line chart in group header. I am using formulae for 'Show value' field. So legend shows it as @formula1
I couldnt change this is design mode, so i went to preview mode and used 'edit axis label' for each of the chart.
Now i can see proper legend labels in my crystal 2008. But when i deploy the report in java application, chart still shows @formula1 .... any idea on why my changes are not displayed in crystalviewer?
Thanks

This is tricky... and somehow you won't find it in manual.
After the change of Axis Label, right click on Chart Area. You will see new option "Apply Changes to All Charts". Choose this option and voila - You owe me a bottle

Line chart mis-match problem

Similar Messages

Maybe you are looking for