Line graph repeated values

Hi,
i have ploted the line graph which is like this select null,week_ending_date,effort from dual;
Here the line is ploted but the labels are repeated
eg:
if the report is like this
Weekending_date effort
12-sep-08 8
12-sep-08 9
14-sep-08 10
15-sep-08 11
In the x-axis 12-sep-08 is repeated mutilple time based on the effort it is returning but we need the label to be repeated only once not multiple times also from the above example 12-sep-08 has 8,9 as the effort it must plot one obove the other if they are repeated with same label please suggest me how to resolve this
Thanks
Sudhir.

Hi Sudhir,
try your query like this -
select null "Link", week_ending_date "Week ending", effort "Effort" from table_name;
it should work, i m currently using same sort of query for flash chart.
Hope this will help.
Thanks,
M Tajuddin
http://tajuddin.whitepagesbd.com

Similar Messages

Line Graph repeats the starting data point at the end also

Hi,
We have a Line Graph as below. This graph is used to show the Salary changes of a person, over time.
But this graph shows an additional non existing data point. Basically it shows the starting data point once again at the end of the other data points.
The model VO for this graph, does not contain this additional data point record. But the graph repeats the starting data point at the end also.
In the screen-shot you can see that, the graph has three data points. But the table has only two. The first data point in the graph is repeated as the last data point.
Is this a Bug..?
Or an issue with the usage of the DVT tags?
The code is given below.
Please advice.
12 <dvt:graph id="lineGraph1" value="#{bindings.SalaryHistory.graphModel}"
13 graphType="LINE_VERT_ABS"
14 shortDesc="#{HcmEmploymentTopGenBundle}"
15 markerDisplayed="true"
16 continuousTimeAxisInterval="CTAI_DAY"
17 contentDelivery="immediate" animationOnDisplay="AUTO"
18 imageFormat="FLASH" stylePath="April"
19 timeSelectorListener="#{backingBeanScope.AssignmentChangesAndSalaryBean.changeTime}"
20 timeAxisType="TAT_MIXED_FREQUENCY" dynamicResize="DYNAMIC_SIZE"
21 inlineStyle="height:40em;"
22 binding="#{backingBeanScope.AssignmentChangesAndSalaryBean.asgSalaryGraph}">
23 <dvt:background>
24 <dvt:specialEffects/>
25 </dvt:background>
26 <dvt:graphPlotArea/>
27 <dvt:seriesSet>
28 <dvt:series/>
29 </dvt:seriesSet>
30
31 <dvt:o1Axis scrolling="asNeeded"/>
32 <dvt:y1Axis/>
33 
34 
42 <dvt:o1MajorTick/>
43 <dvt:o1TickLabel/>
44 <dvt:o1Title id="o1Title1">
45 <dvt:graphFont id="graphFont1"/>
46 </dvt:o1Title>
47
48 <dvt:attributeFormat id="af1" name="DateFrom">
49 <af:convertDateTime pattern="#{applCorePrefs.dateFormatPattern}" />
50 </dvt:attributeFormat>
51
52 <dvt:markerText>
53 <dvt:y1Format>
54 <af:convertNumber pattern="#{applCorePrefs.numberFormatPattern}"/>
55 </dvt:y1Format>
56 </dvt:markerText>
57
58
59 </dvt:graph>

If I understand your question, this from the Pages online help may give the answer:
To mark line, area, and scatter charts with data point symbols:
Select the entire chart. You can also select the chart series (the line or area shape) that you want to mark with data point symbols.
Click Inspector in the toolbar, and then click the Chart Inspector button.
Click Series (except for scatter charts).
Choose a symbol from the Data Point Symbol pop-up menu.
Choose one of the following options from the Symbol Fill pop-up menu:
To fill the symbol with the same color as its outline, choose Use Stroke Color.
To fill the symbol with a solid color, choose Color Fill, click the Fill color well, and pick a color.
To fill the symbol with a gradient, choose Gradient Fill and use the gradient controls to set the colors and change the angle of the gradient.
To fill the symbol with an image, choose Image Fill and select the image you want. You can also resize the image by choosing an option from the pop-up menu above the Choose button.
To fill the symbol with a tinted image, choose Tinted Image Fill and select the image you want. Click the color well to the right of the Choose button to change the tint color. You can also resize the image by choosing an option from the pop-up menu above the Choose button.

Line Graph Issue - In BIP values are summed for same date

Hi
I have below data
Date-----------------------Sell
27-Mar-13----------------10
28-Mar-13----------------15
28-Mar-13----------------20
30-Mar-13----------------25
There are two entries on 28-Mar-2013. On BIP line graph; Sell values are added and graph show value 35 on 28-Mar-2013.
I want to show two different values on line graph for 28-Mar-2013.
Edited by: 1010402 on Jun 7, 2013 12:49 AM

Hi 913804
I am amazed you found the browser certification of OBIEE 11.1.1.6 I could not find it anywhere in the documentation nor from metalink personell.
Regarding the graphs not showing, we found this to be an issue with IE and not with Firefox. First make sure you have followed the upgrade step listed in
3.9.11.2 Updating Oracle Business Intelligence Catalogs from http://docs.oracle.com/cd/E23943_01/doc.1111/e16793/patch_set_installer.htm#PATCH250. Then the last resort was to recreate the graph component in each report from scratch. As you say pie charts are unaffected.
Regards,
Nick.

Creating multiple Line Graph having common values..

Hi...
I've created one application process for creating Multiple Line Graph.
And i've integreted two tables in this graph, where values may be common for both the tables. In this case, for common values, instead of getting overlapped I'm getting scattered graph(its totally abnormal). Please help me if you 've any idea about this issue.....?
Please go through the App Process and the output of the SQL query.
In output of the query, in the NAME column "Feb-2010" is common.
This is the SQL query OUTPUT:_
TABLE 1
NAME VALUE
Sept-2009 100
Oct-2009 95
Nov-2009 98
Feb-2010 97
TABLE 2
NAME VALUE
Jan-2010 93
Feb-2010 100
Mar-2010 98
Application Process :_
DECLARE
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
OWA_UTIL.http_header_close;
HTP.p ('<?xml version = "1.0" encoding="utf-8" standalone = "yes"?>');
HTP.p ('<anychart>');
HTP.p ('<settings>');
HTP.p ('<animation enabled="True"/>');
HTP.p ('</settings>');
HTP.p ('<charts>');
HTP.p ('<chart plot_type="CategorizedVertical">');
HTP.p ('<data_plot_settings default_series_type="Line">');
HTP.p ('<line_series>');
HTP.p ('<marker_settings>');
HTP.p ('<marker type="None" />');
HTP.p ('<states>');
HTP.p ('<hover>');
HTP.p ('<marker type="Diamond" />');
HTP.p ('</hover>');
HTP.p ('</states>');
HTP.p ('</marker_settings>');
HTP.p ('<tooltip_settings enabled="True">');
HTP.p ('<format>Year {%Name}{enabled:false} {%SeriesName} - {%Value}{numDecimals:0}%</format>');
HTP.p ('</tooltip_settings>');
HTP.p ('<effects enabled="True">');
HTP.p ('<drop_shadow enabled="False" />');
HTP.p ('<bevel enabled="true" distance="1" blur_x="2" blur_y="2" />');
HTP.p ('</effects>');
HTP.p ('<line_style>');
HTP.p ('<line thickness="3" /> ');
HTP.p ('</line_style>');
HTP.p ('</line_series>');
HTP.p ('</data_plot_settings>');
HTP.p ('<chart_settings>');
HTP.p ('<title enabled="true">');
HTP.p ('<text>Avg. %App. Uptime per month </text>');
HTP.p ('</title>');
HTP.p ('<axes>');
HTP.p ('<y_axis>');
HTP.p ('<title>');
HTP.p ('<text>Value</text> ');
HTP.p ('</title>');
HTP.p ('<scale minimum="90" maximum="101" major_interval="1" />');
HTP.p ('<labels>');
HTP.p ('<format>${%Value}{numDecimals:0}</format>');
HTP.p ('</labels>');
HTP.p ('<axis_markers>');
HTP.p ('</axis_markers>');
HTP.p ('</y_axis>');
HTP.p ('<x_axis tickmarks_placement="Center">');
HTP.p ('<title enabled="False" /> ');
HTP.p ('</x_axis>');
HTP.p (' </axes>');
HTP.p ('</chart_settings>');
HTP.p ('<data>');
FOR ObjRecord IN (select DISTINCT(K_OBJECT.OBJECT_ID) as OBJECT_ID,name from K_OBJECT, K_OBJ_TYPE_ASP_REL where K_OBJECT.OBJECT_ID=K_OBJ_TYPE_ASP_REL.OBJECT_ID and K_OBJ_TYPE_ASP_REL.OBJECT_TYPE_ID=1)
LOOP
HTP.p ('<series name="'|| ObjRecord.name ||'">');
FOR MonthlyValueRecord IN (select NAME,VALUE
from K_REPORT_RUN,K_ASPECT_VALUES,K_ASP_TIM_RPT_REL
where K_REPORT_RUN.RUN_ID=K_ASP_TIM_RPT_REL.RUN_ID
and
K_ASPECT_VALUES.ASPECT_VALUE_ID=K_ASP_TIM_RPT_REL.ASPECT_VALUE_ID
and
K_ASP_TIM_RPT_REL.ASPECT_ID=1
and
K_ASP_TIM_RPT_REL.OBJECT_ID=ObjRecord.OBJECT_ID
order by K_REPORT_RUN.STARTTIME)
LOOP
HTP.p ('<point name="'|| MonthlyValueRecord.name ||'" y="'|| MonthlyValueRecord.value ||'" />');
END LOOP;
HTP.p ('</series>');
END LOOP;
HTP.p ('</data>');
HTP.p ('</chart>');
HTP.p ('</charts>');
HTP.p ('</anychart>');
htmldb_application.g_unrecoverable_error := true;
END;
Edited by: user12873839 on Apr 9, 2010 3:58 AM
Edited by: user12873839 on Apr 9, 2010 4:02 AM
Edited by: user12873839 on Apr 9, 2010 8:00 AM

>
Help Needed Urgent.....
>
That is one surefire way to not get any help and certainly not urgently. I suggest that you amend the title of your post to something that reflects the actual issue. This will also help anyone with similar issues to find the thread.
When posting code please put {noformat}{noformat} (with the curly brackets and the word code in lower case) above and below it to preserve formatting like this...
{noformat}{noformat}
SELECT *
FROM emp
{noformat}{noformat}
This will be displayed on the forum like this...SELECT *
FROM emp
Cheers
Ben

Multi line graph values issue

Hi,
I am using JDev 11.1.2.2.0
I made a standard line graph which I populate with data through a backing bean.
I read a post on how to put points to the graph:
ArrayList <Object[]> data;
Object[0] -> x axis data, here I have dates
Object[1] -> name of the serie, a new serie is created for each different name
Object[2] -> y axis data, here I have values
Then I put the list to the graph and it works fine, only for one serie.
When I display 2 or more series, the graph shows the different series in different colors as it is suposed to do.
But, the values (Y axis) are not displayed at the correct place. I mean for instance the point with value 4K is displayed below the 3K Y axis marker...
And sometimes the point is displayed above as its real value...
So my graph is false, but my values are correct (I tested it)
Then what can I do? The graph can draw several lines as I managed to put more than one serie. The only problem is that they are not displayed properly...
(if you need the code I can show it)
Edited by: Jikai on 20 sept. 2012 16:51

Ok, I found what was wrong.
In the graph properties the subType field was set to LINE_VERT_STACK, then I changed it to default (LINE_VERT_ABS) and it worked.
<dvt:lineGraph id="lineGraph" subType="*LINE_VERT_ABS*"
binding="#{backingBeanScope.backing_ReportingPopUp.lineGraph}" shortDesc="Graph that shows metrics"
inlineStyle="height:100%; width:100%;" imageFormat="FLASH">
<dvt:background>
<dvt:specialEffects/>
</dvt:background>
<dvt:graphPlotArea/>
<dvt:seriesSet>
<dvt:series/>
</dvt:seriesSet>
<dvt:o1Axis/>
<dvt:y1Axis/>
<dvt:legendArea automaticPlacement="AP_NEVER"/>
<dvt:graphTitle text="Metrics for Hosts by Date" horizontalAlignment="CENTER"/>
</dvt:lineGraph>

How do I create a line graph in numbers if my y values are in minute/second format?

When I try clicking line graph, it shows me an empty graph.....no data on it.....just an x and y axis

Convert your Duration values to numerical equivalent using DUR2MINUTES. Chart the values in the converted column, as shown:
Chart 1: Result when cells containig duration values (column C) are selected and charted.
Chart 2: Result for same type of chanrt with same rows of column D are selected.
D2, and filled down: =DUR2MINUTES(C)
Regards,
Barry

Producing a line graph of int values and saving as an image

Hi,
I wonder if anyone could help me with this. I have 2 arrays of integer values that I would like to plot as a line graph (e.g. X[ ] and Y [ ]) and then have this line graph saved as an image (the format isn't too important but PNG would be preferred).
Could somone point me in the right direction of an easy way to do this?
Thanks,
Pete

Have a look at the following classes :
java.awt.Graphics (drawLine method)
java.awt.Image
java.awt.BufferedImage
javax.imageio.ImageIO (jdk 1.4+)

Plot values in X-Axis in 2D line graph

Hi,
I am using 2D line graph to plot graph but the graph is to be ploted based on date i.e i have a range to be ploted in X-Axis i.e Dates how to plot that please suggest now the values are automatically it is getting ploted
This is query wht i am using
SELECT
pobj.name "Object Name",
tas.name "Task Name",
SUM (TCL.NUM_HOURS_DAY1+TCL.NUM_HOURS_DAY2+TCL.NUM_HOURS_DAY3+TCL.NUM_HOURS_DAY4+TCL.NUM_HOURS_DAY5+TCL.NUM_HOURS_DAY6+TCL.NUM_HOURS_DAY7) ) "Effort"
FROM
timecard_lines tcl,
project_objects pobj,
tasks tas,
projects pro,
timecard_headers thr,
employees epl,
object_task_estimate ote,
TIMECARD_PERIODS TP
WHERE
pro.id = :P61_PROJECTS and
tas.id = :P61_TASKS and
TP.ID = THR.TPD_ID AND
tcl.pobj_id = pobj.id AND
tcl.tas_id = tas.id AND
pro.id = pobj.pro_id AND
thr.id = tcl.thr_id AND
thr.emp_id = epl.id AND
ote.tas_id = tas.id AND
pobj.id = tcl.pobj_id
and
ote.pobj_id = pobj.id and
pro.id in
(SELECT pro.id
FROM projects pro, employee_project_pairs
epp, project_employee_roles per ,employees empl
WHERE empl.id = epp.emp_id
AND pro.id = epp.pro_id
AND epp.project_role_id = per.id )
group by pro.project_name,pobj.name,tas.name
order by pobj.name

Standard syntax on the Mac is Object, Action. The order is always Select an object (in this case, part of a spreadsheet), then perform an action on or with tat object (in this case, make a chart).
The same syntax applies to Copy or Cut (and to Paste, althyough it's not as obvious there—the object is whatever is currently on the Clipboard).
I don't think there is information on printing charts/graphs in the online help. A chart is a graphics object, and is printed as part of the document that contains it. Printing the spreadsheet should also print the chart, provided it is on a page that contains data (AppleWorks's default is to print only the rows and columns that contain data). If you want to print the chart without any of the data, drag the chart over the data to conceal it, and choose the Print options that do not show column or row headers and the cell grid. (These are probably in the AppleWorks options in your Print dialogue, but their position will depend on your print driver.)
Placing the object (the chart) in another document provides an easier method of printing only the chart, and the method you used (dragging the chart from the spreadsheet to the second document is a common and acceptable one. Dragging an object from one document to another places a copy of the object on the second document, and leaves the original on the original document. This is true in general, not just for charts.
In the case of a chart, the copy is a static object, while the original maintains its live connection to the underlying spreadsheet—changing a graphed value in the spreadsheet will change the graph to match the new value, but will not affect the copy in the second document.
Regards,
Barry

Line Graph X-axis Value

Hi ,
I Created line graph in ADF X axis - date , Y axis Amount and Currency Mixed Frequency Line graph
For ex : X - axis dates are 01-jan-2011 to 10-jan-2011
y - axis are amount and currency
when i click particular currency line (on 05-jan-2011) how i will get the x axis value 05-jan-2011
Thanks
Shk

Check the range against which line is plotted, you may have to reduce that range to see accurate values.

Engage 2008: Line Graph, can't start 2nd series @ different X value

Using Xcelsius Engage 2008
Created line chart w/ 2 series
2nd series does not start at the same X value as series 1.
How do I generate the second series so the initial part of my 2nd series line does not show all 0s?
Thank you
Nancy Griffin

Hi Tammy.
I'm using Xcelsius version: 5.0.0.99 and Build number 12,0,0,121.   I am not sure if S1 is already installed. If not, where can I get it?
This is what I'm trying to do:
1) created a basic line graph with two series
Series 1 Data has 2 columns
Series 1 Column 1 includes dates. THis will be the labels for the X axis:
1/1/07
1/6/07
1/12/07
1/1/08
1/6/08
Column 2 includes the line graph data for series 1
30
50
10
90
120, etc
Series 2 column 1 - THis is the same as series 1 since it includes the same labels for the X axis
Series 2 column 2 includes the data for the 2nd line graph
HERE's WHERE IT IS DIFFERENT
I have no data for dates 1/1, 1/6, 1/12/07.   My data starts in
2008. I don't want the graph to show 0s for the first 3 dates and then jump up to the 2008 data.   Is there a way to make the 2nd line chart start on 1/1/08?
thank you. Really appreciate your help.

Chnging y value in line graph

I can't seem to find a way to increase the y value for a numbers line graph. When I use the inspector and tab out of the field it goes back to zero!

I hope that this screenshot will help:
Yvan KOENIG (from FRANCE vendredi 6 juin 2008 19:20:52)

Line graph with single values as dots

Dear Apex experts,
I have the requirement to create a graph in Apex which displays technical values as dots or candles and limit values and average values as lines in one graph.
Is there a way to create two types of graphs in one image ?
Best regards,
Daniel

Hi,
as far as I know, you can't have interruptes series in the DVT line graph
Frank

Line Graph - set useful baseline value automatically

Hi all,
for a line graph in reports I've set the axisMinAutoScaled-property of the Y1Axis-element to "false" and expect that reports find out a useful value for the baseline at its own. Unfortunately the value of the baseline is always set to 0 whether a range of 1.000 to 10.000 or a range of 1 to 10 is selected.
Do you know a way to set the value of the baseline depending on the displayed values.
Thanks in advance.
Martin
Edited by: user11939409 on 14.06.2011 08:43

Hi Sreehari,
I tried to set the y-axis scale for line chart by using code. But its showing the default value, not displaying the value what i gave. Adding my code for reference.
   var axis = new sap.viz.ui5.types.Axis().setScale(
       new sap.viz.ui5.types.Axis_scale().setMinValue(20.0).setMaxValue(100.0).setFixedRange(true));
          column = new sap.viz.ui5.Line({
            width : "100%",
            height : "400px",
            legendGroup: legendPosition,
            plotArea : {
            colorPalette : ['#F67A7A','#FEE00A','#B6C359'],
            title : {
              visible : false,
              text : ''
            xAxis:{
            title:{visible:false} ,
            yAxis : axis ,
            dataset : dataset

Don't round values (line graph label)

I need to make a line graph with labeled markers. So, I create a marker design with "%02" (without quotes) as label to show the values. But, if I type, for example, 6,10 into the sheet, the marker's label shows 6,1. But I need show the entire number (with all the decimals, without rounding them up or down). Could you guys help me? Thanks a lot!

Hi,
According to your post, my understanding is that some fields not display in the alert email.
Yes, we can use the workflow to replace the alert email.
You can use the action “Send an Email” to achieve it, set the workflow auto start when items create or change.
Note:The MMS, PG and the Slot are the column name.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Hide values to be displayed along Y-axis in line graph

Hi friends,
I need to generate a line graph using Oracle reports. But the values along y-axis should not be displayed. Can anyone help me how to hide displaying values along the y-axis
Thanks,
venkat

Venkat,
I am not sure if it can be hidden. I will update this thread if I find something. But for now, what you can do is, create a Rectangle over the y-axis values. Change the background color of the rectangle same as graphs color, and line color as 'No Line'. It will hide the values.
Hope this helps.

Line graph repeated values

Similar Messages

Maybe you are looking for