Multi line graph values issue

Hi,
I am using JDev 11.1.2.2.0
I made a standard line graph which I populate with data through a backing bean.
I read a post on how to put points to the graph:
ArrayList <Object[]> data;
Object[0] -> x axis data, here I have dates
Object[1] -> name of the serie, a new serie is created for each different name
Object[2] -> y axis data, here I have values
Then I put the list to the graph and it works fine, only for one serie.
When I display 2 or more series, the graph shows the different series in different colors as it is suposed to do.
But, the values (Y axis) are not displayed at the correct place. I mean for instance the point with value 4K is displayed below the 3K Y axis marker...
And sometimes the point is displayed above as its real value...
So my graph is false, but my values are correct (I tested it)
Then what can I do? The graph can draw several lines as I managed to put more than one serie. The only problem is that they are not displayed properly...
(if you need the code I can show it)
Edited by: Jikai on 20 sept. 2012 16:51

Ok, I found what was wrong.
In the graph properties the subType field was set to LINE_VERT_STACK, then I changed it to default (LINE_VERT_ABS) and it worked.
<dvt:lineGraph id="lineGraph" subType="*LINE_VERT_ABS*"
binding="#{backingBeanScope.backing_ReportingPopUp.lineGraph}" shortDesc="Graph that shows metrics"
inlineStyle="height:100%; width:100%;" imageFormat="FLASH">
<dvt:background>
<dvt:specialEffects/>
</dvt:background>
<dvt:graphPlotArea/>
<dvt:seriesSet>
<dvt:series/>
</dvt:seriesSet>
<dvt:o1Axis/>
<dvt:y1Axis/>
<dvt:legendArea automaticPlacement="AP_NEVER"/>
<dvt:graphTitle text="Metrics for Hosts by Date" horizontalAlignment="CENTER"/>
</dvt:lineGraph>

Similar Messages

Line Graph Issue - In BIP values are summed for same date

Hi
I have below data
Date-----------------------Sell
27-Mar-13----------------10
28-Mar-13----------------15
28-Mar-13----------------20
30-Mar-13----------------25
There are two entries on 28-Mar-2013. On BIP line graph; Sell values are added and graph show value 35 on 28-Mar-2013.
I want to show two different values on line graph for 28-Mar-2013.
Edited by: 1010402 on Jun 7, 2013 12:49 AM

Hi 913804
I am amazed you found the browser certification of OBIEE 11.1.1.6 I could not find it anywhere in the documentation nor from metalink personell.
Regarding the graphs not showing, we found this to be an issue with IE and not with Firefox. First make sure you have followed the upgrade step listed in
3.9.11.2 Updating Oracle Business Intelligence Catalogs from http://docs.oracle.com/cd/E23943_01/doc.1111/e16793/patch_set_installer.htm#PATCH250. Then the last resort was to recreate the graph component in each report from scratch. As you say pie charts are unaffected.
Regards,
Nick.

Creating multiple Line Graph having common values..

Hi...
I've created one application process for creating Multiple Line Graph.
And i've integreted two tables in this graph, where values may be common for both the tables. In this case, for common values, instead of getting overlapped I'm getting scattered graph(its totally abnormal). Please help me if you 've any idea about this issue.....?
Please go through the App Process and the output of the SQL query.
In output of the query, in the NAME column "Feb-2010" is common.
This is the SQL query OUTPUT:_
TABLE 1
NAME VALUE
Sept-2009 100
Oct-2009 95
Nov-2009 98
Feb-2010 97
TABLE 2
NAME VALUE
Jan-2010 93
Feb-2010 100
Mar-2010 98
Application Process :_
DECLARE
BEGIN
OWA_UTIL.mime_header ('text/xml', FALSE);
OWA_UTIL.http_header_close;
HTP.p ('<?xml version = "1.0" encoding="utf-8" standalone = "yes"?>');
HTP.p ('<anychart>');
HTP.p ('<settings>');
HTP.p ('<animation enabled="True"/>');
HTP.p ('</settings>');
HTP.p ('<charts>');
HTP.p ('<chart plot_type="CategorizedVertical">');
HTP.p ('<data_plot_settings default_series_type="Line">');
HTP.p ('<line_series>');
HTP.p ('<marker_settings>');
HTP.p ('<marker type="None" />');
HTP.p ('<states>');
HTP.p ('<hover>');
HTP.p ('<marker type="Diamond" />');
HTP.p ('</hover>');
HTP.p ('</states>');
HTP.p ('</marker_settings>');
HTP.p ('<tooltip_settings enabled="True">');
HTP.p ('<format>Year {%Name}{enabled:false} {%SeriesName} - {%Value}{numDecimals:0}%</format>');
HTP.p ('</tooltip_settings>');
HTP.p ('<effects enabled="True">');
HTP.p ('<drop_shadow enabled="False" />');
HTP.p ('<bevel enabled="true" distance="1" blur_x="2" blur_y="2" />');
HTP.p ('</effects>');
HTP.p ('<line_style>');
HTP.p ('<line thickness="3" /> ');
HTP.p ('</line_style>');
HTP.p ('</line_series>');
HTP.p ('</data_plot_settings>');
HTP.p ('<chart_settings>');
HTP.p ('<title enabled="true">');
HTP.p ('<text>Avg. %App. Uptime per month </text>');
HTP.p ('</title>');
HTP.p ('<axes>');
HTP.p ('<y_axis>');
HTP.p ('<title>');
HTP.p ('<text>Value</text> ');
HTP.p ('</title>');
HTP.p ('<scale minimum="90" maximum="101" major_interval="1" />');
HTP.p ('<labels>');
HTP.p ('<format>${%Value}{numDecimals:0}</format>');
HTP.p ('</labels>');
HTP.p ('<axis_markers>');
HTP.p ('</axis_markers>');
HTP.p ('</y_axis>');
HTP.p ('<x_axis tickmarks_placement="Center">');
HTP.p ('<title enabled="False" /> ');
HTP.p ('</x_axis>');
HTP.p (' </axes>');
HTP.p ('</chart_settings>');
HTP.p ('<data>');
FOR ObjRecord IN (select DISTINCT(K_OBJECT.OBJECT_ID) as OBJECT_ID,name from K_OBJECT, K_OBJ_TYPE_ASP_REL where K_OBJECT.OBJECT_ID=K_OBJ_TYPE_ASP_REL.OBJECT_ID and K_OBJ_TYPE_ASP_REL.OBJECT_TYPE_ID=1)
LOOP
HTP.p ('<series name="'|| ObjRecord.name ||'">');
FOR MonthlyValueRecord IN (select NAME,VALUE
from K_REPORT_RUN,K_ASPECT_VALUES,K_ASP_TIM_RPT_REL
where K_REPORT_RUN.RUN_ID=K_ASP_TIM_RPT_REL.RUN_ID
and
K_ASPECT_VALUES.ASPECT_VALUE_ID=K_ASP_TIM_RPT_REL.ASPECT_VALUE_ID
and
K_ASP_TIM_RPT_REL.ASPECT_ID=1
and
K_ASP_TIM_RPT_REL.OBJECT_ID=ObjRecord.OBJECT_ID
order by K_REPORT_RUN.STARTTIME)
LOOP
HTP.p ('<point name="'|| MonthlyValueRecord.name ||'" y="'|| MonthlyValueRecord.value ||'" />');
END LOOP;
HTP.p ('</series>');
END LOOP;
HTP.p ('</data>');
HTP.p ('</chart>');
HTP.p ('</charts>');
HTP.p ('</anychart>');
htmldb_application.g_unrecoverable_error := true;
END;
Edited by: user12873839 on Apr 9, 2010 3:58 AM
Edited by: user12873839 on Apr 9, 2010 4:02 AM
Edited by: user12873839 on Apr 9, 2010 8:00 AM

>
Help Needed Urgent.....
>
That is one surefire way to not get any help and certainly not urgently. I suggest that you amend the title of your post to something that reflects the actual issue. This will also help anyone with similar issues to find the thread.
When posting code please put {noformat}{noformat} (with the curly brackets and the word code in lower case) above and below it to preserve formatting like this...
{noformat}{noformat}
SELECT *
FROM emp
{noformat}{noformat}
This will be displayed on the forum like this...SELECT *
FROM emp
Cheers
Ben

2d Flash Line Graph Issues

Hi,
I am editing the xml for the 2d flash line graph, and having difficulty performing some customisations.
Could anyone assist with the following:
1) Changing the default line colours. I have 4 series. Changing the following does not change the line colours:
<line_chart left_space="5" right_space="5">
<block_names enabled="no" />
          <dots radius="1"/>
          <lines size="1" auto_color="no" color="blue"></lines>
          <lines size="1" auto_color="no" color="red"></lines>
          <lines size="1" auto_color="no" color="green"></lines>
          <lines size="1" auto_color="no" color="pink"></lines>
</line_chart>
2) Is there any way to add commas (thousands) to the Y axis labels?
Many thanks for any assistance with these
Steve

Hi Ben,
Yes I was looking at that, but just discovered that I can do the following:
<values show="no" thousand_separator="," />
and it seems to do it.
I am now having REAL issues with the X and Y axis formatting. I am including font nodes inside the y_axis / x_axis nodes (as per anychart 3 docs) but the formating properties are not changing the axis labeling:

do you have any experience with doing this?
thanks again
Edited by: Steve_Macleod on May 14, 2009 3:18 PM

Multi line issue in Table Cell Editor

Hi,
I am developing an occasionally connected application for handheld devices using NetWeaver Mobile 7.1. In one of the view, I have a table which display items information from the data source. In one of the column I need to display item description so I used TextEdit in the Cell Editor to display the information in multi line format and also wrapping is enabled.
But during testing of the application the TextEdit control does not wraps the text and as well as only first line of TextEdit control is visible inside the table and rest of the rows are not visible because of table's row height is not adjusted to the TextEdit control. I couldn't find any option to vary the size of the row height of the table.
Please suggest a solution to bring multi line display with in the table.
Also, check out my other issue posted here.
[Issue in wrapping of text in TextEdit control|Issue in wrapping of text in TextEdit control]
Thanks in advance.
Regards,
DVR.
Edited by: Vinodh Raj D on May 28, 2009 8:18 AM

Hi Vinodh,
Mutliline text in a text view/edit control inside a table cell is not supported.
You can view multiline text in a text view/edit as a seperate control inside a view. I think in case you want to see the whole address you can create a detail(s) view which can be navigated from the list (table) view.
Regards,
Nipun

How do I change the value labels in a line graph without changing the data in the source table?

Where the graph values show 1 I want them to change to text (different each time). Is there a way to make this happen?
Also, is there a way to connect the series markers - circles - with solid lines even if there is no data in the table. E.g from 1.5 to 2.5 a solid line even if there is no data under 2.0?
Is there perhaps a better way altogether to achieve this graph?
Thanks.

HI Mick,
Sounds like something that could be achieved with no "graph" at all.
This is a combination of a table and an inserted shape (line). Enter the dates as the goals are achieved. Here's a second image of the same 'chart,' taken before the table grid was whited out:
Regards,
Barry

New lines created in excel when displaying multi-line text item value

Hi all,
I put the value of a multi-line text-item into a csv file :
DECLARE
file_filter VARCHAR2(256) := 'Export Files (*.csv)/*.csv/All Files (*.*)/*.*/';
fExp VARCHAR2(256);
in_file Text_IO.File_Type;
linebuf VARCHAR2(4000);
BEGIN
fExp := get_file_name ( directory_name, file_name, file_filter, NULL, SAVE_FILE, TRUE);
IF fExp IS NOT NULL
THEN
set_application_property(cursor_style,'BUSY');
in_file := Text_IO.Fopen( fExp, 'W');
linebuf := NVL(:com_bnc_possibles.LIBEL_TRAITE,'') || ';' ||
NVL(:com_bnc_possibles.NUM_ANFR_ID,'') || ';' ||
                         NVL(:com_bnc_possibles.ver_fiche,'') || ';' ||
                         NVL(:com_bnc_possibles.titre,'') || ';' ||
NVL(to_char(:com_bnc_possibles.date_creat, 'dd/mm/yyyy'),'') || ';' ||
NVL(to_char(:com_bnc_possibles.date_valide, 'dd/mm/yyyy'),'') || ';' ||
NVL(:com_bnc_possibles.LIBEL_STATUT,'') || ';' ||
NVL(:com_bnc_possibles.label_reg,'') || ';' ||
NVL(:com_bnc_possibles.nom,'') || ';' ||
NVL(:com_bnc_possibles.prenom,'') || ';' ||
NVL(:com_bnc_possibles.nom_societe,'') || ';' ||
NVL(:com_bnc_possibles.comp_bnc,'') || ';' ||
NVL(:com_bnc_possibles.motifs,'') || ';' ;
Text_IO.Put_Line( in_file, linebuf);
Text_IO.Fclose( in_file);
set_application_property(cursor_style,'DEFAULT');
END IF;
END;
And when I opened the csv file then the remaining lines , that is from the second line , of the column "motifs" are displayed through the column A of excel. The "motifs" multi-line text-item has 500 as its Maximum Length property value, and has a Char Data Type property value.
So how to display all the motifs' lines through the same column M without displaying the remaining lines in column A ?
Or are there tips to remove CHR(13) characters from a multi-line text-item ?
Thank you very much indeed.
Message was edited by:
andrianiaina

Hi,
I tried to do it in different way. What i did is I have created a item of type formattted text and set its text like:--
<html>User authentication failed. <br*> Cause: Invalid password.</html> --remove *
So I am able to see the prompt like :-
User authentication failed.
Cause: Invalid password.
Hope this helps you...
Thanks
--Anil

Issue with Line Graph in SSRS

I am pulling my hair our trying to format a line graph.
Below is my current report -
The Line Graph I have created has a Category Group of "YearLogged" and "MonthLogged".
The series I have added is an expression -
=Count(IIF(Fields!InvoicePaid_.Value = "Yes" And Fields!ProcessTarget.Value = "InTarget", 1, Nothing))
As you can see the data label is coming back as values in "Paid" column from my table. What I want is the percentages instead labelled.
Also the Y axis is coming back with the total Paid invoices as a percentage? That's not right I want that to show up to 100%.
I just want to show what % of invoices are being paid In Target over the month.
Another question - where is the legend title getting "Process Target" from? Can I rename that to what ever I want?

Hi ikilledbill,
According to the snapshot of the chart you have provided that it seems you have put the fields "YearLogged" and "MonthLogged" in the Category Group and add field "InTarget" in the Value area as Series, you also add
the expression "Count(IIF(Fields!InvoicePaid_.Value = "Yes" And Fields!ProcessTarget.Value = "InTarget", 1, Nothing))" to display another series, now you want to display the percentage of InTarget/Paid as the data
point, right?
I have tested on my local envoronment and details information below for your reference:
I have use some sample data as below and if you want to display the percentage value as in below snapshot, you need to add expression like below in the series:
=Fields!InTarget.Value/Fields!Paid.Value
After add the expression, right click the data label to select the "Series Label Properties" and click Number to select the "Percentage".
Right click the Y-Axis and select the "Vertical Axis Properties", click Number to select the "Percentage".
To change the Legend Title, please right click the series and select the "Series Properties", enter the title you want in the "Custom legend text":
If I have some misunderstanding, please try to provide more details information about the design of the chart and also sample data in the table.
Any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Line graph issue in web report

Hi
I have a 3 queries/reports on one page in my web report. I have 3 line graph buttons, one for each query.
My issue is, in the report result or table, I have characteristic "Product" in rows and Key figures in Columns.
Product                          Month 1     Month2
XYZ          Demand
             On hand stock
             Ending Inventory
But when I hit the line graph button, it shows Product in the X (horizontal) axis and number ranges like 15000, 20000, 25000 in the Y axis.
I need to swap the axes. I tried the "swap display axis" in the web items tab, but it didn't work.
I read other threads on the same topic here and someone had suggested creating a query view, switching the columns and rows there and running the report to display the line graph as required.
If I do that, won't the report result in the table also swap the rows and columns? I want the table to show Product in the Rows and KFs in the column as it is now, but I want the line graph to show Product in the Y axis and the Key figures in the Y axis.
Any ideas on how to do that? Any help will be greatly appreciated. Thanks!
Pooja

This is what I did:
1) In BEX Analyzer, I opened the local view of the Query and swapped the Key figures and Characteristics. I put the key figures in the columns and Characteristics in the Rows
2) I ran my report and save it as a View
3) In WAD, I assigned the Chart to the View.
When i ran the report from WAD, it still shows the key figures or number ranges in the Y axis and Characteristics on the X axis again.
I checked the "swap display axes" option in Web Item tab, but the line graph still remains the same.
Is there another way to do this? Or am I missing something?
Thanks
Pooja

How do I create a line graph in numbers if my y values are in minute/second format?

When I try clicking line graph, it shows me an empty graph.....no data on it.....just an x and y axis

Convert your Duration values to numerical equivalent using DUR2MINUTES. Chart the values in the converted column, as shown:
Chart 1: Result when cells containig duration values (column C) are selected and charted.
Chart 2: Result for same type of chanrt with same rows of column D are selected.
D2, and filled down: =DUR2MINUTES(C)
Regards,
Barry

Producing a line graph of int values and saving as an image

Hi,
I wonder if anyone could help me with this. I have 2 arrays of integer values that I would like to plot as a line graph (e.g. X[ ] and Y [ ]) and then have this line graph saved as an image (the format isn't too important but PNG would be preferred).
Could somone point me in the right direction of an easy way to do this?
Thanks,
Pete

Have a look at the following classes :
java.awt.Graphics (drawLine method)
java.awt.Image
java.awt.BufferedImage
javax.imageio.ImageIO (jdk 1.4+)

Multi line values in mail forms to send emails

Hi All,
Ours is CRM 2007 application, as part of new capability adding to the system, we need to send email to customer with few details once service tickets saved in the system. we decided to use mail forms to create the template and send email to the customer with details. as part of this we need to send multi line values as well in the mail form - email as shown below. example field here is for working hours of the customer office.
Saturday - Sunday 10am - 4pm
Saturday - Sunday 10am - 4pm
(excluding public holidays)
Can some body tell me how to send the multiline values using mail forms - emails to customers. right now we receive the last line. I dont see any help in mail form documetation as well on this.
I appreciate any help in this if you already have some solution.
Regards,
Srinivas

Hi,
Are you using below any FM to send mail ?
1. CRM_IM_EMAIL_CREATE_SEND_40 2. CRM_IM_EMAIL_CREATE_SEND_51
if so, then inside this FM there will be call to BADI CRM_IM_ADD_DATA_BADI . This badi will get the data for custom/additional attribute values. Basically it will get one value ( last value ).
What u might need to do is after this badi call u need to loop ur values and set it . For doing that u might need to make this FM tocustomer name space or look for implicit enhancements.
We have done similarly for sending mail duringcampaign execution. That was done in different place.
hope it might help you to analyse more.
Regards
Sandeep

Plot values in X-Axis in 2D line graph

Hi,
I am using 2D line graph to plot graph but the graph is to be ploted based on date i.e i have a range to be ploted in X-Axis i.e Dates how to plot that please suggest now the values are automatically it is getting ploted
This is query wht i am using
SELECT
pobj.name "Object Name",
tas.name "Task Name",
SUM (TCL.NUM_HOURS_DAY1+TCL.NUM_HOURS_DAY2+TCL.NUM_HOURS_DAY3+TCL.NUM_HOURS_DAY4+TCL.NUM_HOURS_DAY5+TCL.NUM_HOURS_DAY6+TCL.NUM_HOURS_DAY7) ) "Effort"
FROM
timecard_lines tcl,
project_objects pobj,
tasks tas,
projects pro,
timecard_headers thr,
employees epl,
object_task_estimate ote,
TIMECARD_PERIODS TP
WHERE
pro.id = :P61_PROJECTS and
tas.id = :P61_TASKS and
TP.ID = THR.TPD_ID AND
tcl.pobj_id = pobj.id AND
tcl.tas_id = tas.id AND
pro.id = pobj.pro_id AND
thr.id = tcl.thr_id AND
thr.emp_id = epl.id AND
ote.tas_id = tas.id AND
pobj.id = tcl.pobj_id
and
ote.pobj_id = pobj.id and
pro.id in
(SELECT pro.id
FROM projects pro, employee_project_pairs
epp, project_employee_roles per ,employees empl
WHERE empl.id = epp.emp_id
AND pro.id = epp.pro_id
AND epp.project_role_id = per.id )
group by pro.project_name,pobj.name,tas.name
order by pobj.name

Standard syntax on the Mac is Object, Action. The order is always Select an object (in this case, part of a spreadsheet), then perform an action on or with tat object (in this case, make a chart).
The same syntax applies to Copy or Cut (and to Paste, althyough it's not as obvious there—the object is whatever is currently on the Clipboard).
I don't think there is information on printing charts/graphs in the online help. A chart is a graphics object, and is printed as part of the document that contains it. Printing the spreadsheet should also print the chart, provided it is on a page that contains data (AppleWorks's default is to print only the rows and columns that contain data). If you want to print the chart without any of the data, drag the chart over the data to conceal it, and choose the Print options that do not show column or row headers and the cell grid. (These are probably in the AppleWorks options in your Print dialogue, but their position will depend on your print driver.)
Placing the object (the chart) in another document provides an easier method of printing only the chart, and the method you used (dragging the chart from the spreadsheet to the second document is a common and acceptable one. Dragging an object from one document to another places a copy of the object on the second document, and leaves the original on the original document. This is true in general, not just for charts.
In the case of a chart, the copy is a static object, while the original maintains its live connection to the underlying spreadsheet—changing a graphed value in the spreadsheet will change the graph to match the new value, but will not affect the copy in the second document.
Regards,
Barry

ADF11g: dvt, line graph x-axis (o1 axis) display issue

Hi,
In our application we are generating line graphs for a set of data.
This graph is plotted in between 2 sets of numeric values. (one plotted on x-axis and other on y-axis).
For better accuracy of plotted graph we are using these numeric values upto 7 decimal places. (for example 8.1234567)
Now when graph is plotted, then on x-axis (that is o1- axis in case of Line Graph) the tick labels are showing upto 7 decimal places.
Is there any way so that I could control the display of these tick labels to 1 decimal place instead of 7 decimal places?
More Info:
++The tick labels for x and y axis are generated at runtime by some calculation logic.++
++If we set the tick labels for x axis to 1 decimal place instead of 7 decimal places when they are generated , then this will lead to build in accurate graphs.++
++So we can't control the decimal format of tick labels when they are generated. We need to control it when they are displayed.++
Please help...
Thanks and Regards
Manav Ratra

Hi Frank,
this is not working :( . It holds good for the case where one has to display markers (tick labels) on the lines of line graph and not the tick labels on the axis.
Moreover here i find out tag as *<dvt:x1Format>*
where as line graphs does not support x1axis they have o1axis .
In my case I need to control display of tick labels on the o1axis.
Regards
Manav Ratra

Line Graph X-axis Value

Hi ,
I Created line graph in ADF X axis - date , Y axis Amount and Currency Mixed Frequency Line graph
For ex : X - axis dates are 01-jan-2011 to 10-jan-2011
y - axis are amount and currency
when i click particular currency line (on 05-jan-2011) how i will get the x axis value 05-jan-2011
Thanks
Shk

Check the range against which line is plotted, you may have to reduce that range to see accurate values.

Multi line graph values issue

Similar Messages

Maybe you are looking for