Line Item vs Totals

Dear SDN,
In what way does FISL line item table differ from a Totals table?
Can I say line item in FISL are transaction data at journal entry level  while totals table is aggregated data at period and account level?
Regards
Adette

Hello Addete
If you want you can use this parallelism, in case you use SL to build a
Balance Sheet report and have information about single documents posted.
Just a little explanation:
When configuring your own  SL scenario you first define a table group (transaction GCIN). A table group in Special Purpose Ledger consists of five individual tables:
Summary table (totals)
Actual line item table
Plan line item table
Object table 1 (object/partner)
Object table 2 (transaction attributes)
When you customize the ledger (GCL1) you indicate  the summary table that postings to this ledger will update. Also here you indicate if line items should be updated. If so, also the line item table of the table group will be recorded.
Obviously line item table has to be consistent with summary table.
Regards
Javier

Similar Messages

  • Display  6 line items and total in main window

    Hi,
    I want to display only 6 line items in main window( on first page and also total of the main window of first page), and consecutively in all the apges i want to display only 6 line itms and total in each page of main window, how to write logic for this.
    Thanks,
    Donlad

    Hi r u talking about Snmartform if yes
    Let us take the page you are using as PAGE1, you can achuve this using the Command Node. call the same page after 6 items as follows
    1.create Table.--->Main area , Header and footer.
    2.Declare a variable V_count type sy-tabix.
    a.Now click on the table tab>Main Area>right Create>Command (insert a command node after the Line type you r using to print the data), in this COMMAND node give the condition V_COUNT = 6. GOTO>PAGE1 (it maens you r  triggering the new page after the 6 lines.
    b. after this command noder insert the Program lines heate increase the value of V_COUNT.
    Maintain another variable the use that for page totals...
    total can be doneautomatically by using the TABle-->CALCULATION TAB.
    let me know if you more clear info, iam sure u r problem willbe solved.

  • PO line items delete, Total vlue of PO didn't changed

    Hi Experts,
    In Purchase order , Functional person creating PO for service, When he want to delete some line item , Total value of PO didn't change. Any one assist on this.
    Thank you
    Sri

    HI
    If you block the material (lock symbol) the print preview will have both  the blocked item and active item and price accordingly.
    If you delete the material then the print preview will have only active item.
    Regards
    Reddy

  • Smartform line item -group total

    Hai All,
             I need logic for the following requirement in smartform,
    I should print the subtotal of each group of line items that i have calculated in my report.\
             for example Group-A has 1,2,3 line items.now i should print t total at the end of this particular group item in SMF.
             similarly       Group-B has 1,2,3,4 line items.now i should print t total at the end of this particular group item in SMF .

    Hi,
    If you have the Driver program, then do the logic in your driver program and finally print those details in the smartform.
    sort itab by group.
    Loop at itab assigning <fs_tab>.
    v_total = v_total + <fs_tab>-field.
    at end of Group.
    <fs_tab>-newfield = v_total.
    clear v_total.
    endat.
    endloop.
    Now use this new field in your smartform to print the totals.
    Regards,
    Venkatesh

  • Matching FI Line Items and Total Records for FM

    Dear Friends,
    Currently, we are implementing Public Sector Management using Former Budgeting.
    Some PR and PO has been created, before the FM budget data transferred from Cost Center Planning using FM9C.
    Using FMRP_2FMB4002 report, the u2018Available Amountu2019 still equal to u2018Curr. Budget Amountu2019, even though we can display the detail PR and PO by double-click the column u2018Assignedu2019 and u2018Commts/Act.u2019 in this report.
    After executing RFFMRC04, system shows many line items containing Fund Center, Commitment Items, and its Amount.
    I need your assistance to resolve these issues, so that the FM Report can be analyzed accordingly.
    Thanks for your kind attention.
    Regards,
    (Vincent)

    Hi,
    This thread has been created some time ago and recieved no response. Can you please close if you feel this issue/query has been resolved in the meantime. If it has not then please provide additional information in relation to your query. By providing updates to your thread it moves you thread to the first page of thread and increases visibility and possiblity for the multiptude of experts in SDN Forums to offer their support.
    Therefore please update with more information or close thread.
    Thank you for your assistance.
    Regards,
    Brendan.
    (ERP FI/CO SDN/WIKI Moderator)
    http://wiki.sdn.sap.com/wiki/display/ERPFI/ERP+Financials

  • Total and Line Item dataload (1 or 2 datasources)

    Hi all,
    When realignment happens on R/3 it does not update line items, only totals.
    If you have been loading line items in BW how to you get the new "totals" when realignment happens?  I read the notes that state COPA will decide what table to read when loading (most appropriate).
    Do you need to create 2 datasources (1 for line item and 1 for totals) or does the system know (even when your loading line items) to update totals and read appropriate table?
    Thanks,  Mike

    Hi Manfred,
    Thanks for replying...
    I have a COPA extractor that has line items selected in addition to totals.
    When a realignment happens in R/3 I understand that it updates totals, but not line items. 
    When I load to BW I have a COPA ODS that I am leaving line item information in.  Then updating "totals" to the InfoCube.
    So I am not sure if the "totals" is getting updated after realignment because I have line item char's selected also in my datasource.
    Do I need to worry about this, or simply when a realignment happens all I have to do is re-init and the "totals" will be updated to BW.
    This is why I was asking if I should have 2 COPA datsources, 1 for line item the other for just totals (not selecting any line item char's).  Then just update the line item extractor to ODS and update total extractor to InfoCube.
    Thanks so much.
    Mike

  • GL Totals - Line Items Reconciliation

    Hi,
    Does anyone know a report with which you can compare the GL totals table (GLT0) with the line item tables (BSEG BKPF)?
    We have loaded line items and totals into two different BW cubes and the data doesn't reconcile.
    Thanks!

    Hi Simon,
    What about the S_ALR_87012332 transaction?
    (Accouting -> Financial Accounting -> General Ledger -> Information System -> General Ledger Reports -> Line Items -> G/L Account Statements -> S_ALR_87012332 - G/L Account Statements)
    Daniel Carvalho.

  • G/L Balance and Line items difference

    Dear Mates,
    We have a Inventory-Spare Parts G/L account
    When i see the FS10N g/l balances ,there is a figure appearing as 25,82,887/- in the period February and when i double click on the above said figure to see the line items whose total comes to 30,89,627/- with doc.type: WA.
    Can please tell me ,what could be reason for the difference between Balance appearing on the initial screen and line items total.
    Please treat it very urgent as auditors are sitting on my head.
    Thanks
    Subbu

    Hi,
    First let me know the SAP R/3 version and fiscal year.
    In the mean time, you can also check any changes has been made to your GL account master data related to line item display.
    all the best

  • Missing Line Items and '?' Symbols in some Reports

    I have upgraded the patch level of my production server and patch level
    list is given below
    SAP_BASIS 640 0022 SAPKB64022
    SAP_ABA 640 0022 SAPKA64022
    ST-PI 003C_640 0001 SAPKITLPS1
    PI_BASIS 2006_1_6400006 SAPKIPYL06
    SAP_BW 350 0021 SAPKW35021
    SAP_HR 500 0017 SAPKE50017
    SAP_APPL 500 0019 SAPKH50019
    PI 2004_1_5000004 SAPKIPZI64
    problem is that whenever I run SAP FICO standard reports FL3N, FBL5N,
    KB01, F.08 etc it generates the report correctly but when i am taking
    print out of these reports it misses some line items and total value as
    well screen shots are attached for information.
    my second problem is that there are some garbage entries with
    symbol '?' in SAP Menu and toolbars of some Reports. Screen shot is
    also attached for your information.
    i am facing lots of problem in executing my daily operations due to
    these errors.
    regards,
    Majid Khan

    Dear Subramanian,
    I am facing the same problem in Development and Quality Assurance Server
    Regards,
    Majid Khan

  • Freight Calculation based on the net value of the Line item

    Hi SAP Gurus,
    I have one requirement for Freight calculation(Sales order is created through an IDOC) :
    In the idoc,we will receive a freight dollar amount - which will be the total amount of freight.(example 100)
    We will also receive sales dollar for each line item ,which is then passed to the pricing procedure, for a total amount of sales for that Sales order.
    (examples below, for a total of 1500)
    The 100  is to be posted to a freight G/L account.
    The 100 is further divided by each profit center  of the materials on the Sales order.
    The freight is split out amongst the  profit center , based on the net value of the line item.
    Freight value to be allocated = Line item value/total value of the sales order * Freight amount.
    Total of the sales order =1500
         Line item value     Freight value calculation     Profit center
    Material A:      800          800/1500*100  = 53     Profit center A
    Material B:     500          500/1500*100  = 33     Profit center B
    Material C:      200          200/1500*100  = 13     Profit center C
    Please let me know how to achieve this functionality in pricing procedure or what changes i need to make in Freight condition type.
    Thanks in advance,
    Bhakar Saha

    Were you able to resolve this issue of allocating freight costs to line items/profit centers using the net value of the line items?

  • Stock deficit when line item changes in sales order

    Hi expert
    i am using 4.7,i am getting deficit when i am pgi for sales order
    Scenario
    i have assigned serial number for material
    i have sales order of 5 lines item with total QTY 5, with sales order, i make PR,purchase order and migo, now some reason one of of line item od sales order get rejected, so we reverse all the step of migo and PO, then we create a new line item for sales order, then PR,purchase order and migo.
    Now i am doing PG for that Quantity i show deficit of 1 Qty,
    But in MMBE be agiant the sales order its showing me 5 Qty.
    If it is development, how do we achieve this.
    Let me know if you need more details on this. Appreciate your possible solutions to this.
    Thanks
    Rgds
    Nabil

    solve by own

  • Selection of data from RSEG for various PO line items

    Hi ,
    We have a requirement to calculate the total goods receipt value and break up cost for transportation also. In purchase order there are various conditions (base price, transportation,surcharge). I am trying to get all the goods movement for a PO line item and total goods receipts. Similarly all the documents from RSEG(we are using split invoice)  for that PO line item, so for each PO line item RSEG has entries as many as  conditions (i am trying to get all the conditions for PO line item from KONV table) . If the total goods receipts and invoiced amounts are different, i need to calculate the expected value based on conditions on PO for the remaining quantity.
    The problem is each condition in PO line item has one RSEG entry, but in the field KSCHL(condition type) does not have any value for base price, but it has for other conditions.
    is there any specific reason for not updating that for base price.
    Thanks in advance

    Hi,
    The 'Free Items' indicator in the overview is only used to facilitate               
    the switching off of the Inv.Receipt flag and the GR-based IV flag.                 
    Note that the 'Free Items' indicator is not stored on the PO item                   
    table EKPO.                                                                         
    The Inv.Receipt flag (and the GR-based IV flag) are the fields that                 
    really controls if an item is 'free' or not.                                        
    So, the field is initiated based on the values in those fields rather               
    than from input from the user.                                                      
    When an invoice is expected it's not a free-item. This indicator 
    invoice receipt is chosen from the main-item and also from the          
    customization maintained for item category 0 in table T163.  
    I am afraid that I have to say that in standard SAP design                   
    it is not possible to default the "Free item" flag.   
    Regards,
    Edit

  • Some Line Items are missing in Standard SAP FI/CO Reports

    Dear All,
    while taking printout of SAP Standard FI/CO Reports some line items and total value are missing. E.g using TCODE FBL3N, it shows correct value after inserting selction inputs but when displaying it in spool request or taking print out it misses some line items and total value.
    Kindly help me in resolving the issue.
    Regards,
    Majid Khan

    Problem was caused by support pack SAPKB62063 and SAPKB62064.
    Apply OSS note 1100728 which was corrected in SAPKB62065.
    Giana

  • FM to get Fund/Fund Center/Commitment Item- Item level total (FMBB)

    Hi,
    1. How to get line item level total of of document created in Fund Management with FMBB tcode? Is there a Function Module for the same? The data stored in FMBH/FMBL are period wise.
    2. Is there any way we can change Prepost amount of a FM document on fund/fund center/commitment item level ?

    Hi Naveen,
    check the following tables
    1. FMIFIHD - FM Header table in Fund management
    2. FMIFIIT - FM Line item Table in Fund management
    3. FMIT - Totals table for fund management
    4. FMIA- Actual Line item table for Fund management
    For the second point, i think you need to reverse the origin document and repost it with correct amount. There is no other option.
    BR
    Amitash

  • Forms Recognition Line items validation

    Dear all
    I'm working on a Forms Recognition POC whose delivery date is on 10/10. I want to disable the validation of the amounts from the line items and total amount, how can I do so?
    Thanks and Best Regards

    There are few things i believe you need to do here. One being search the AP Project PDF that comes with the solution, i believe there are a few settings in the INI that will set default Non-PO which should disable the line item matching portions of the scripts thus never having to validate the line items.
    To disable to total's validations, open the script editor for the invoices class, search and comment out all instances of the following function 'fnValidateAmount', that should remove all the totals validations. Or you can modify that function to fit your projects needs

Maybe you are looking for