Lineage Report: no mapping name !

The lineage/impact report for tables does not show the mapping name.(OWB 92)
Is this a documentation bug ? But really, an impact report on a table is not very useful unless the map name is displayed

Did you try to refresh the dependency index? When you log into the design browser, the first page you see is the repository level data. One of the links related to the repository is 'refresh dependency index'. Click on the link and try your report again.
Regards:
Igor

Similar Messages

URGENT: OBIEE Lineage Reporting

Experts,
I need to generate a report in Answers which will show me the following info:
Answer Request/Report Name, Answers Column Name, Answers Folder Name, DB Column Name, DB Table Name .
In Oracle Discoverer there is EUL Admiinstration Business Area, which can do some thing like this but know not sure if OBIEE has something like this. Any valuable info on this is much appreciated.
Thanks in Advance.

Firstly, Im not sure why people think putting URGENT in the title , do we look at this thread before the others ?
Have you googled OBIEE Lineage reporting? Do you fully understand the Presentation Services and BI Servef components ?
What you need to do is run a Repository Documentation export from the Admin tool - This will give you Phyiscal layer through to Subject Area (Presentation Layer) Mapping.
Then run a catalogue manager export of the reports in your presentation catalogue, you can pull back all the attributes from a given answers request you have asked for, you can run a dashboard report from the catalogue manager also if you wish to look further.
Once you have the two outputs I suggest you load them into a database table so you can join them efficiently, model them into your RPD and you have your equiverlant to the Disco EUL Admin layer.
Hope this helps,
Rgrds
Alastair

Lineage Report in OWB 9.2 without Portal

Hello,
I would like if there is a way to use the Lineage Report without having Portal installed. I try by starting the OC4J Instance, but the browser display the error page page cannot be found.
Any tips ?
Thanks
Claude-Alain

This is the quick write up on this:
If you want to use the browser locally, you have to set up an HTTP listener on the database. The one that ships as part of the 9i Enterprise
Edition database that you use for the design environment can be used for this purpose. You also have to create a database access descriptor that points to the
<OWB92> schema. To do that, make sure the HTTP listener is up and running (on a Windows platform, this is a service). Use a browser to navigate to the HTTP
server index by using http://<machine and domain>:<port number> (example: http://mwiel-pc.us.oracle.com:7778). Click on Mod_plsql Configuration Menu.
Click on Gateway Database Access Descriptor Settings. Click Add Default (blank configuration). Enter a Database Access Descriptor Name (for example, use
<OWB92>), Schema (use <OWB92>), Oracle User Name (use <OWB92>), Oracle Password (use password for <OWB92>) and Oracle Connect String (beware
that the connect string uses SID in the <host name>:<port number>:<SID> connect string, not Service name). The remainder of the properties can be left as is.
Click OK and close the browser.
To invoke it using the OWB menu, make sure you have the OC4J engine running, and you are ready to go. From Warehouse Builder... set the preference under project,
preferences (menu). Beware that for the local installation this only works if everything runs on one machine (design repository, respository database and http listener).
Jean-Pierre

Disk Utility error "Mediakit reports partition map too small. 3TB

So I have a Mac Pro with a 3TB inside, but Snow Leopard won't recognize the whole 3TB. I can format it, but it only allows 801.23 GB. The remaining space is left as Free Space. When I try to resize the Volume, I get this:
I get this error: " Partition failed with an error." MediaKit reports partition (map) too small.
Can someone help me find a way to utilize the 3TB as it was intended to?
My setup:
MacPro1,1
10.6.8
ST3000DM001-1CH166:
Capacity:          3 TB (3,000,592,982,016 bytes)
Model:          ST3000DM001-1CH166
Removable Media:          No
Detachable Drive:          No
BSD Name:          disk0
Rotational Rate:          7200
Medium Type:          Rotational
Bay Name:          Bay 1
Partition Map Type:          GPT (GUID Partition Table)
S.M.A.R.T. status:          Verified
Volumes:
Capacity:          209.7 MB (209,715,200 bytes)
Writable:          Yes
BSD Name:          disk0s1
BK:
Capacity:          801.23 GB (801,225,752,576 bytes)
Available:          737.7 GB (737,702,121,472 bytes)
Writable:          Yes
File System:          Journaled HFS+
BSD Name:          disk0s2
Mount Point:          /

Anyways, i've made it work. My process was this:
Problem:
1. I put MacPro into Target Disk Mode to mount to my 2011 MacBook Pro. Disk Utility on MBP would only see 800GB.
Solution:
2. Booted the SL CD on the MacPro and ran Disk Utility from there. In the partitions tab, I chose 1 partition, and hit apply.
3. "could not unmount disk."
4. So I tried to partition it again, and it worked this time. 3TB Available.
5. I then booted the MacPro using an external HD with OSX on it to run CarbonCopyCloner to reimage my backup.
I hope this helps anyone else with the same problem.

Acrobat (8.1.2): How to add 'mapping name' (/TM)

The PDF spec (1.4) defines that every form field can have an (optional) mapping name (key is TM). Is there a way to set this mapping name with Acrobat Profession 8.1.2?
Thanks for any help,
ToM
From the PDF spec 1.4 pp. 531:
(Optional; PDF 1.3) The mapping name to be used when exporting interactive
form field data from the document.

There are a number of ways to execute the relevant JavaScript, from using the JavaScript console, to setting up a custom menu item or toolbar button, to using a batch sequence. I would probably construct a list of field name/mapping name value pairs and use the JavaScript console to run the code that sets the submitName.
To check whether the fields in a PDF have a mapping name set, you could again use JavaScript to loop through the collection of fields and get the value of the submitName property. You could also set up a script on the server to report on the field names that were submitted.
George

Cannot Send Email from Crystal Reports Viewer; MAPI:Overflow

I am trying to send a report via email with crystal reports, but i get the following error message:
"The following unexpected error occured while trying to send the report to MAPI: Overflow."
I am using Outlook 2010, Win 7 x64 bit.
Does anyone have any ideas or thoughts?

Yes, it is a 3rd party app that opens Crystal Reports Viewer. Attached are the screen shots I get when try to send the report as an email.
-Dan

How to change Crystal Reports XI database name at run time from ASP code using ADO

Dear All,
I need advises regarding to my problem below
I have two database in same SQL 2005 SERVER for TEST01 and LIVE01 Environtment, and I've created more than 100 reports with Crystal Reports 11 and call it from ASP classic page.
The problem is how can I change a database from TEST01 to LIVE01 at the run time from ASP code as I already using TEST01 database on Crystal Reports and I do not want to set a new database location inside crystal for each reports
Thanks and wait for your reply soon.
Below is my code, which has no effect to crystal reports although I've change the database from TEST01 to LIVE01:
<%
Dim oADOConnection, oRptTable, oADORecordset, sql
Dim struser, strpwd, strdriver, dblocation, dbname, strConnect
struser = "sa"
strpwd = ""
strdriver = "{SQL SERVER}"
dblocation = "SQL200501"
dbname = "LIVE01" ' Changed from TEST01 to LIVE01
strConnect = "User Id=" & strUser & ";"
strConnect = strConnect & "PWD=" & strPwd & ";"
strConnect = strConnect & "DRIVER=" & StrDriver & ";"
strConnect = strConnect & "SERVER=" & DBLocation & ";"
strConnect = strConnect & "DATABASE=" & dbName
sql="Select * from Employee"
Set session("oApp") = Server.CreateObject("CrystalRuntime.Application.11")
Set session("oRpt") = session("oApp").OpenReport("C:\REPORTS\RPT01.RPT", 1) 'USING TEST01 DATABASE
session("oRpt").MorePrintEngineErrorMessages = False
session("oRpt").EnableParameterPrompting = False
session("oRpt").DiscardSavedData
Set oADOConnection = Server.CreateObject("ADODB.Connection")
oADOConnection.Open (strConnect)
Set oADORecordset = Server.CreateObject("ADODB.Recordset")
Set oRptTable = session("oRpt").Database.Tables.Item(1)
oRptTable.SetDataSource oADORecordset, 3
session("oRpt").SQLQueryString = CStr(sql)
session("oRpt").ReadRecords
%>

Did you ever find a solution to this problem? I have the same problem when moving reports from development to Test to Production environments. If the DBName is not the same the report ignores the name provided at runtime.

RDL reports(2008).File name after using Export to Excel is not comming properly in mozilla firefox.

I am using Export to Excel functionality in rdl report.
File name should be "Profitabilty By Buyer". It is working as expected in IE and chrome.
But in mozilla firefox the file name appears as "Profitabilty".
So the issue is it doesnt consider anything after space and user requirement is such that I cant put underscore("_") also instead of space.
Kindly suggest the proper solution.

Hi Mukesh,
Reporting Services, we use a Web browser to view the report that deploy to Report Service. However, not all report functionally is supported by all browsers. Such as, the print button is not supported in Mozilla Firefox. It works only in Internet Explorer
due to it uses ActiveX for the print button.
I have tested it on my local environment, (SQL Server Reporting Services 2008, Firefox 28.0), we cannot reproduce this issue. So the issue can be the custom setting of your browser. Since SSRS reports are not about targeting NON-IE browsers, so in your scenario,
we recommend you use IE to view report on Report Manager.
And you said that you cannot put underscore ("_") also instead of space. However we can do this which you can see on the screenshot below.
Regards,
Charlie Liao
TechNet Community Support

Install error : disk cannot be used to start up your computer [or] MediaKit reports partition (Map) too small

Greetings,
I am aware that this problem has been discussed, but in long and vague discussions that I had to sift deeply to find an answer. Therefore I am posting a clear message, as this problem can be very troublesome for someone who just received a Mac OS installation disk and cannot install it.
Situation : you cannot install/update your new system because the installer does not consider your volume.
Error message : this disk cannot be used to start up your computer.
Version française : Ce disque ne peut pas être configuré pour démarrer votre ordinateur.
Also discussed below error: "MediaKit reports partition (Map) too small"
Note : although this occurred with a Snow Leopard (10.6) install DVD, it can alo occur with Lion (10.7) according to discussions on Apple web site.
IF YOUR CONDITIONS ARE AS FOLLOWS :
- You are using an official Apple installation DVD of Mac OS 10.6 (Snow Leopard) [or 10.7 Lion] or an official download/upgrade of those systems.
- Your main Mac partition scheme is in GUID as it should be (check with Disk Utility). That partition contains a Mac system that can start-up.
- Your volume format is: Mac OS Extended (journaled) [the format should not be Case Sensitive.]
- You have the hardware requirements to install Mac OS 10.6 (Intel processor; internal or external DVD drive or a linked DVD drive; 1 GB of RAM; a screen controlled by your computer graphics card; at least 5 GB space on the hard disk or 7 GB if you install all components).
- Using Disk Utility, you of course tried the disk Repair Tool and the Repair Permissions tool.
- Your hard disk does not have a file called Backups.backupdb (if it does, this means Time Machine has once used this hard disk for its back-ups). Anyhow, if it were the case, the installation would give a different error message (with the word TimeMachine). This file may block the installation: Apple Support suggest to place it in the garbage, *without* deleting it, and placing it back on the disk later. Mind you, if you do not use this hard disk as such to save your Time Machine back-ups, you can simply delete this file.
HOW TO FIX :
1. Boot with the 10.6 install DVD (Tip: you can either select Mac 10.6 as the boot DVD in your Start-up Preferences or simply press down c during the start-up).
2. Above the install screen, you have a Utilities tab from where you can run Disk Utility. Select your hard disk and select the Partition tab. Resize the primary Mac partition (don't add a new one) by decreasing it by about 5 GB.
It will look like this http://i.imgur.com/jHTbr.jpg
( That image shows only one partition, but the same principle applies even if you have two or more partitions on your disk.)
Also see the official Apple how to: http://support.apple.com/kb/TS3926
Version française: http://support.apple.com/kb/TS3926?viewlocale=fr_FR
3. Commit the change by hitting "Apply"
3.b. If you get the error "MediaKit reports partition (Map) too small", this is a rare error where the partition that follows (for example Bootcamp) is slightly overlapping your main Mac partition. You will need to reduce that other following partition. Once you have reduced the other partition, you will probably need to return to step 2 and 3 and try again.
[ For example, in my case, I had resized my Bootcamp with CampTune software and it would seem that the file system ended-up somehow larger than the actual partition container. I simply asked CampTune to reduce the partition a bit (barely 2 GB) and that fixed it.]
4. Reboot, again into the 10.6 install DVD.
5. You can then install 10.6.
6. Once 10.6 is installed, use the Disk Utility on the desktop (you can boot into the primary HD at this point) to resize the primary partition back to its original or maximum size.
SOURCE (main fix): http://forums.macrumors.com/showthread.php?t=774410 [and] http://support.apple.com/kb/TS3926
SOURCE (explaination for MediaKit error): some Apple discussion post.
nb: in my case, it was on a MacBook Pro (late 2008).

GasMan4932 wrote:
When I click on the icon for this drive, the warning message below states "Mac OS X cannot be installed on 'iMac HD', because this disk cannot be used to start up your computer." Obviously that's not true, since that's where the OS is installed.
How did you partition this drive, if you did that? Does it contain start up or utility partitions for any other OS (for instance Linux)? There have been reports that the "cannot be used to start up your computer" message will appear if a third party utility was used to create a 'triple boot' system or such, apparently because SL is picky about the format GUID partition scheme table info & how partitions are allocated space on the drive by other formatting/partition methods.
For some users with these partitions, the fix has been as simple as "tickling" (slightly changing) the partition size of some partition with Disk Utility, which apparently updates the GUID partition scheme table info so that the SL installer accepts it as safe to use with SL.( In this sense, the message may be trying to say the installer thinks the disk can't be used to reliably start up your computer with SL, not in general.)
See the discussions topic Cannot install Snow Leopard over 10.5.8 for more about this.

Report painter object name change during transport

We have a requirement to add 5 fields (In selection screen) to report painter reports ( Reports of CJE3 and GRR3 ).We created Z reports as a copy of standard reports, added required 5 fields by implementing SAP notes and other settings .We have also done implicit enhancements for all these reports to make change in the behavior of new fields .This is working fine in the development client but the problem is once we transport this to Quality system new reports get generated( With new name ) and implicit enhancement will be lost.
For E.g.:
In development client for CJE1/CJE2 report the program name will be "GPAVPSATWFP4NN0YRDBIQBHI8MQ" (In this program we have done implicit enhancement )
but when we transport it to other client new program "GP8O1UCNZTJYY5LTO8GN0UW2GQB" is generated in which implicit enhancements are not found.
Rgds
Sameer

Hi,
have you looked at export/ inport functionality (gr57/ gr58) or what mode of transport are you using?
Regards
Hein

When I save a PDF report the file name is xdo instead of "report name.pdf"

Hi,
I started a new project with BI Publisher integrated with OBIEE, I builded a set of reports that are working properly (these are the first reports on this OBIEE/BIP server)
Accessing Oracle BI Cataloge I can run the reports and change the output format to pdf.
when I press the right mouse button and select "save as" a dialog box appears.
On the "File name" field, the default name that BIP writes is "xdo" I would like it to be the "name of the report.pdf".
It seems that if I create a new report the file name is correct but if I change the name of the report then BIP always selects XDO as the default file name.
Is there any place where I can configure the default name.

Thanks for the quick reply. I figured out how to get the desired results by using tagging. For anyone who may reference this post in the future, I went to "Customize" in the top right corner of Adobe, then selected "Create new tool set...", looked under "accessiblity and found the "tag" option. Hit ok, tag is added to the toolbar. Then I highlighted the dataset in the PDF that was relevant to the output format, then clicked "tag", saved as spreadsheet. Sorry I can't provide more details on how tagging works or if there's a more elegant solution available, but I'm sure one's out there.

How do I know the source of 0DOC_CATEG in a report since mapped from 3 diff

Hi,
How do I know the source of 0DOC_CATEG in a report since mapped from 3 different sources
I have in report a 2 chars, 0DOC_CATEG and 0DOC_TYPE which are in a dimension Dim1 in the multiprovider Mult1.
In the Identification for the multiprovider, it shows that the 2 fields come from the cube, Cube1.
Now in the 4 update rules from the underlying 4 ODSs to the cube1, the characteristic mappings show that 0DOC_CATEG and 0DOC_TYPE are being mapped from 3 different ODSs(Order Header, Billing Item and Billing header) to the cube1.
So now, if in a report I see 0DOC_CATEG and 0DOC_TYPE, how do I know whether it came from the Order Header ODS, Billing Item ODs or Billing header ODS?
Thanks

hi,
it is from the same cube then you can do for analysis by adding the request id from the datapackage dimension and chk the corressponding req id in the manage tab of you cube/monitor screen.
Ramesh

Need Seeburger BIC Mapping names for standard Msg types - EANCOM2002

Hi All,
I need Seeburger Bic Mapping names for standard Msg types.
Orders
ORDRSP
DESADV
Note that they are in EANCOM2002 format.
Kindly provide them asap.
Can anyone pls send the document to [email protected] if you have the Seeburger mapping names for EANCOM2002 and ANSIX12.
Thank You.
Regards
Seema.

Hi Marcos,
>> IF they have been deployed in your system the names will be:
>> See_E2X_ORDERS_UN_D96A
>> See_X2E_ORDERS_UN_D96A
>> See_E2X_DESADV_UN_D96A
>> See_X2E_DESADV_UN_D96A
R u sure of we can use these mappings for EANCOM2002 format.??
R u sure EANCOM2002 is equavalent to UN D96A???
-Seema.

AS2 Module tab.. Mapping Names for modified Standard Msg types ? ? BIC ??

HI All,
Im using AS2 adapter for standard PO message type orders.orders05
and i thought of using the seeburger standard mapping name "See_E2X_ORDERS_850" in AS2 Module tab.
Now the problem is my client has extended the idoc to orders.orders05./glb/orders by adding few more fields in some of the segments.
Since we have modified the standard message type and i dont think the standard mapping name will work for this ?? im i correct??
If yes, i think we need to use BIC mapping tool and modify the standard xsd by importing and we need to create the new map ( ex:map_E2X_Orders_Modified.xml) ,generate the SDA file for this and we need to deploy SDA into XI.
And finally if we use the modified mapping name in our AS2 module tab.I think it will work????
Any suggestion or inputs we can approach in these kind of situations.
Thank you.
Regards
Seema.

Hi Chirag,
Nice to see you back in action
I will be doing the below steps in BIC.. and let me know if anything is wrong in this.
i will Create the Project name as " Project_Orders_Modified" in BIC tool
1) i will modify the std msg xsd in txt file and Under my project name i will import it under EDIFACT. Save it and i will export it and save it in folder as...
 msg_DT_Orders.xml
2)i will create XML Message for this by giving

source : msg_DT_Orders.xml
Target : msg_XML_DT_orders.xml
I will import it into My Project " Project_Orders_Modified"
3) I will create the CreateMappingEDI to XML by giving
source : msg_DT_Orders.xml
Target : map_E2X_DT_orders.xml
I will import it into My Project " Project_Orders_Modified"
Then I will run the map.. and checks if it is working fine.
If yes, i will import my mapping into Active mappings and i will generate SDA file and will deploy into XI .
Finally i will use the mapping name " map_E2X_DT_orders " in AS2 Module tab.
Let me know if anything wrong.
-Seema.

Specifying table with jdbc-class-map-name

Greetings
How do I specify the name of the table to map to when using the jdbc-
class-map-name hint?
In my jdo file, I have specified:
<class name="Customer" objectid-class="CustomerId">
<extension vendor-name="kodo" key="jdbc-class-map-name" value="base">
<extension vendor-name="kodo" key="table" value="PERSONS"/>
</extension>
but when mappingtool generates the mapping file, the "table" hint
is ignored, and I end up with the following in the .mapping file:
<class name="Customer">
<jdbc-class-map type="base" table="FRED.CUSTOMER"/>
What I really want to see in the above jdbc-class-map is:
table="FRED.PERSONS"
I am using the property setting: kodo.jdbc.Schemas: FRED
Note that mapping fields to columns using jdbc-field-map-name
seems to work fine...
Any clues? Thanks.
droo.

You can't specify table or column names via mapping tool hints. The
typical way to change the default names is either to override the
getValidTableName/getValidColumnName methods in a custom DBDictionary
for systematic changes, or to follow the process outlined in example 7.6
on this page:
http://www.solarmetric.com/Software/Documentation/latest/docs/ref_guide_mapping.html#ref_guide_mapping_mappingtool_examples

Lineage Report: no mapping name !

Similar Messages

Maybe you are looking for