Link and unlink video and audio clips

In this tutorial reTooled.net compares audio and video linking in Premiere Pro vs. Final Cut Pro.  Premiere Pro’s Group Function is also discused and the tutorilal shows you how you can use it to extend your timeline functionality.: Link and unlink video and audio clips

In this tutorial reTooled.net compares audio and video linking in Premiere Pro vs. Final Cut Pro. Premiere Pro’s Group Function is also discussed. The tutorial shows you how you can use it to extend your timeline functionality: http://www.retooled.net/?p=204

Similar Messages

  • How to unlink video and audio in FCPX

    I am new in FCPX.. can someone tell me how to unlink video and audio in FCPX ? and how to mute audio rather than low the -db ?

    There's no 'Unlink' audio (as such) in FCP X but if you select a clip in the timeline, and press Shift+Ctrl+S, the audio breaks away from the clip. Select this, and you can toggle it on and off by pressing V.
    Take care with this, because it's easy to get the audio out of sync. You need to move the audio and video together if you have to move them, so I would select them both and press Option+G to make them into a Compound Clip (to preserve sync).
    To mute the audio embedded in a clip, select the clip in the timeline and press Cmd+4 to open the Inspector.
    Click the Audio Tab at the top of the Inspector and uncheck the Audio Waveform(s). Your Audio will be muted.
    To mute audio for the entire project, go to the Roles tab in the Timeline Index (next to the film reel icon) and uncheck Audio or Dialogue (as appropriate).
    Andy

  • I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

    I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

    Hi
    In iMovie'11 (version 9.0.x)
    on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
    down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
    Here one can select the Pre-Set speeds
    Are you familiar with getting 'inspector' to run?
    No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
    Yours Bengt W

  • I am trying to play an mp4 in quicktime and the video and audio does not sync. Any tips?

    I am trying to play an mp4 in quicktime and the video and audio does not sync. Any tips? This is not hack/ripped video but a legit home movie.

    In this case, it looks like Quicktime wasn't very efficient in managing memory, leading to a slowdown in playback. If QT has a lag and VLC doesn't, that's more evidence.
    I couldn't say why your friend's windows computer plays the media fine, while your Mac doesn't. The only thing I could suggest is to disable QT streaming video - which has been known to slow down performance.

  • How do I download the video file audio clip?

    I have imported and saved video clips in Lightroom 5. I can play these clips in LR and both video and sound is played.  When I try to download these video clips in CS6 only the video clip is downloaded but not the audio clip.

    Did you read the link I posted about no sound when playing mts video?  I do not know if Photoshop had the same problem as LR
    I did download a sample video from your camera model.  Sound played in windows media player but not Photoshop.
    Also saw problem reported  no sound MTS video in Premier Pro.
    Check out this Google search
    https://www.google.com/search?q=No+sound+playing+MTS+video+&rlz=1C1CHFX_enUS546US546&oq=MN o+sound+playing+MTS+video+&aqs=chrome..69i57.18373j0j8&sourceid=chrome&espv=210&es_sm=122& ie=UTF-8
    Official Response
    EMPLOYEE 
    Paul Kleczka (Customer) 1 year agoI worked with Lily offline.
    Unfortunately, because of licensing restrictions, Lightroom only supports Dolby Digital audio with 2 channels or less. The files in question had Dolby 5.1 audio. So it appears the behavior of playing video with no audio in Lightroom is as expected.

  • Seeking Keynote transition triggered by completion of video or audio clip

    I've searched for an answer, and not found it elsewhere, so I'm posing my question here.
    In Keynote, the automatic transition from one slide to the next is a matter of the timing defined in the Inspector. One thing that seems to be missing is the ability to trigger a slide transition (or a build transition) upon the natural ending of a video or audio clip. In a complex slide, with many builds, with various timing, plus a voiceover audio clip, I seem to have to calculate the sum of all the build transitions and estimate the amount of delay I need to incorporate such that the clip completes before the transition, then it is a matter of Play & Edit to fine tune that timing. I'm looking for the ability to transition based on the completion of the clip - somewhat similar to the existing feature where a build element occurs, for example, "After Build X" (with a defined delay). Perhaps I need to be able to have multiple levels of build nesting. If anyone has solved this problem, or knows of the solution, please let me know.
    The bottom line is that I am trying to get away from trial and error timing with slides containing video and audio clips.
    Thanks,
    Brian

    Unfortunately, there's currently no solution to this problem. You can send feedback, though, through this page.
    http://www.apple.com/feedback/keynote.html

  • How can you create a playlist with music and music video and play those from same playlist through Apple TV?

    How can you create a playlist on Ipod touch with music and music video,  and play those from same playlist through Apple TV?  I can download, create a playlist with both music and music video, stream that through the Apple TV with no problem.  The sound and the information show up on the TV, but when it gets to a music video, it only shows the information and "artwork".
    I also have a video playlist - videos play fine through the Apple TV, but will not shuffle through all videos - continues to repeat the same one.  I have most definitely selected shuffle in both locations - from the playlist and on the ipod video screen while video is playing.

    I finally got it... had to sync the photos with the music in iMovie, arrange the voiceover in GarageBand then export to iTunes, and then I was able to put it all together in iMovie and burn in iDVD... had a few glitches along the way but finally finished : )
    Message was edited by: jpewald

  • Can I link and lock video and audio tracks - layers - as in Photoshop?

    I'd like to link and lock entire clips of video and audio tracks, as I might in Photoshop, so that I can insert some material ahead of this group without having to move each separate tack in my timeline. I have a group of clips which works well together now, and it would be so nice to be able to link them, lock them together as on unit, and just insert the new material into the timeline ahead of this piece. Any ideas?

    alann
    What version of Premiere Elements and on what computer operating system?
    For now, a generalized Premiere Elements Windows answer.....
    You would select all the clips (all at one time) that you want to move together, then Clip Menu/Group.
    Or right click anywhere in the selection to bring up the pop up menu including the Group option.
    Have you been there and done that yet?
    Please supply more information so that we can fine tune the information that you seek.
    Thank you.
    ATR

  • Multicam: first cut unlinks video and audio

    I have a question about something that has bugged me for a long time.  I do a lot of multicam editing and after the first cut the audio and video become unlinked and requires that each cut be done twice--once for video and once for audio.  This is really annoying because if you forget and move the playhead then you cut is out of sync and you have to redo it.
    Is there some way to keep the sequence linked to make editing less tedious?

    As in, this
    vs this
    I had to actually lock audio track in the first image one to prevent it from cutting both like the second image. CS6 btw...
    Do you have any of the tracks deselected/locked?

  • Program to remove sound from video and join video with audio file?

    With which program can I remove the sound of a video and join/sync the video file with another audio file?
    Thank you

    Can I suggest using something that will allow audio capture from the external mic. to start with. Then you will have a video with audio in sync, in a format that you can re encode into whatever format you wish.
    But, if you must do that. Dump the video from the handycam file, then put the mics audio file with it. ffmpeg -i video ffmpeg -i audio into whatever container and codecs that you want. You may have to adjust audio-video sync
    ffmpeg -i audio -itsoffset 0.1 -i video
    Search this forum and the web. There are hundreds of ffmpeg examples. And the ffmpeg man
    https://ffmpeg.org/ffmpeg.html
    ffmpeg will do just about anything, but is a little daunting. Ask specific questions and you'll get specific answers. Or find a front end for it. I never use them.

  • Help with cursor please. . And Syncing Video to Audio.

    Hello, and thanks for reading this. I'm starting with a small project to start learning Premier.
    I've taken about 25 second clips from some songs and mixed them into a 15 minute mix, I would like to incorperate live tour footage of him preforming the song in sync with the songs so that his mouth is moving at the same time and Hand and body movements and such. .
    I'm having a hard time doing this because unlike Adobe Audition when you select a part of the timeline and hit space to play, and then hit space again to pause it and can have the cursor jump back to where it was when you hit play the first time, in Premier when you hit pause it stops where you pause it, and i have to move the timeline, which is very hard to do when I'm zoomed in so far because I need to be presise.
    Is there a better way to do this, or any tips you can provide to help me?
    So far I've added markers to the beginning and end of each song, but it still needs about 3 secs of fine tuning which is proving to be hard when I have to keep zooming out and moving back.
    Thanks so much..

    These are both great help to me, While I would love to continue hearing more tips I do have a question to add which you may know the answer to.
    When using the trim tool   to make a video shorter or longer, because when setting the in and out points i can't make them exact until it's on the timeline, can you shorten or lenghthen it per frame, like when using the alt key to move the video, instead of dragging with the mouse?
    Thanks so much (:

  • Lost 200+ pictures and many videos and sound clips

    So, I wanted to update the iOS to iOS5, but something went wrong. It backed up (so I wasn't too worried), but it didn't restore properly. Error "-1". A pretty much unknown error. I tried again 2 day's later, and it worked like a charm.
    BUT, in the 2 days, I went to a championship DTM race, about 600km (370 miles) away, shot over 200 pictures and many many videos and sound clips. We even stopped at the Nürenburgring Nordschleife before the DTM on the way and took the car to the track a few times. Awesome.
    After the restore, I had all my previous stuff back, but lost all of the Nürenburgring Nordschleife and DTM pictures... Is there any way to get those back? iTunes restored my iPhone without asking me! So I lost everything as soon as I started up iTunes...

    caseyann55 wrote:
    I lost all of my pictures and videos on my HTC rezound except for about 30 pictures out 700+. I did not delete them and according to my phone it wont even let me erase my SD card which everything was on. Why would my phone only erase my pictures and videos? Is there any way I can retrieve them? I had the back up plus but even it only has my pictures that I have taken since then and the 30 random pictures that it didn't delete. I noticed they were all gone after an update had occurred. Any help would greatly appreciated.
    Have you taken the SD card out and put it into a computer or something to see if they are there or not? That would be my first thing to try.

  • Starting and stopping video and MP3

    I can't seem to get around my video and audio files starting when I arrive at the page. I'm even using some example code with start and stop buttons. This is in CS4 Flash. I expect it's because the ActionScript is in the wrong place because when I run the movie it flashes through all of the pages on the site without stopping at the home page. Is there some generic code that will allow me to simply swap out the name of the video or audio file I want to start. If there is, do I need to locate it on its own layer at the top of the timeline? Thanks to anyone who can help.

    >>Why is it that the default setting for a video player placed on the stage
    is to start playing when the page appears? I would think it would be
    paused.<<
    I don't know it doesn't seem any more logical to have it paused. I assume it
    is just a preference on the part of the developers of Flash.
    >>Is there some piece of script that can correct this situation<<
    There are several ways to pause the video playback at teh beginning of the
    Flash movie. It actually depends on how you have the movie inserted into the
    time line. If you used an FLVPlayback component, then all you have to do is
    click to select the component, open the component inspector
    (window>component Inspector) and se the autoplay value for the component to
    false. If you have the video inserted another way let me know.
    >>Forgive my naivete but I am trying to learn the ways of Actionscript
    wherever I can find it and builds something at the same time.<<
    Thats always hard. What tecnology do you normally work with Ajax? C++
    The comment about the behavior of video suggests you work with a technology
    that has the opposite autoplay behavior.
    Jerron Smith

  • Is there a way to stream video from an external camera to the iPad? Ultimately, I would like to have an app to annotate content and save video and stills. Thanks

    Hi - I am completely new to the iPad apps world (other than as a consumer). My current laboratory workflow takes live analog video from a high quality camera mounted on a microscope, passes the composite signal through a digitizer and displays the digitized stream via USB with a program on my computer. I can watch, resize, and capture stills or video segments from the live video feed. I have good solultions to accomplish this for both Mac and the PC.
    What I would really like is to get that live video on an iPad in the context of an application where users can capture still pictures and short video segments of the streamed content, annotate them with descriptive observations, and search in a  database for comparable images. Is there an existing technology that would allow me to handle at least the video display and capture aspect around which a specific app could be built? I am new to iPad so I have no idea how to do this. Everything I've seen is about watching pre-stored video programs that are already  on the Mac. Thanks so much.

    Hello Sugeet Posey
    Check out the article below to troubleshoot issues with connecting to your iSight camera.
    How to Troubleshoot iSight
    http://support.apple.com/kb/ht2090
    Regards,
    -Norm G.

  • Storing and converting videos and slideshows (Mac OS)

    hi all, new user here.
    i have a host of files with some coming from my PC days and am currently using Aperture to store and create m4v and mov files.
    right now i have AVI, mpg, mp4, PDF etcetera etcetera that i am trying to organize. when i doubleclick on some of these files they open in AME and i am guessing this means that i need to associate the file type with some other software or if i should convert them to a more convenient format such as mov or m4v which Aperture recognizes. so right now these files are just sitting in a file folder in various formats since Aperture does not appear very good at recognizing some of these video formats.
    i would like to /store/ this data in a database or in software that will allow me to get it all organized and i am wondering if Bridge is a good place to do this or if user recommend LR or if there is in fact an adobe product to get this data organized.
    i think ideally i would put all images and slideshows and videos in one place but i am guessing this means i would have to convert my videos to some file format (say mov or m4v for Aperture) so i am also wondering if this is a good way to go and if Adobe Media Encoder is the proper tool for this.
    any sage advice is really welcome.
    P.S. i also have PDF and EPS which both don't seem to play nice with aperture.

    Although there sometimes are problems with certain video files Bridge is the correct application to start for organizing your files. You can use the filter panel to only show certain file types, you can rename, rate and label the files, etc etc.
    Some video files should be able to play in the preview window. It pays multiple pages PDF also in the preview window although there can be problems with PDF from InDesign showing all content.
    You can use the folder panel for easy drag and drop files in different folders.
    Anyway, before experimenting make sure to have a proper back up of your files and then start playing around freely to learn more about Bridge.

Maybe you are looking for

  • Keychain: cannot add a new item

    i'm getting an error now when i try to add an item to my keychain... An error has occurred. Unable to add an item to the current keychain. 1000013 any idea of what's going on? i tried running keychain firstaid... tried restarting keychain... nothing.

  • Resource Initial field is read only

    Hi, I'm working with project online/project pro and the (enterprise) user resource initials cannot be changed. It is a read only field for any user in the system.  Any idea on how to set custom initials for enterprise resources??? Regards, Wim 

  • Where is the tutorial and not online

    I just bought Dreamweaver and want to go through a tutorial within the program. I am on dialup and want to learn the program without having to be online to go through the tutorial, is this even possible any longer? Please help.

  • What is service entry sheet?

    Hi, What is service entry sheet? In what way, it is related to PO? Please clarify breifly. I am tyrig to create a invoice in MIRO transaction based on the service entry sheet. Thanks.

  • How to Group Effects

    I think I read somewhere that you can group several effects together so that you can apply that group instead of having to pick each individual effect. Can someone tell me how this is done? Thanks!