Link between sales order & characteristic values
I have the requirement for giving the values of the characteristics for the particular sales order.The item in sales order is KMAT.
Can anyone help me with the Dictionary tables?
hi,
SELECT SINGLE cuobj FROM inob INTO l_clobjectkeyin
WHERE klart = l_class AND
objek = l_matnr AND
obtab = l_obtab.
l_klart = l_wa_alloclist-classtype.
l_objek = l_clobjectkeyin.
CALL FUNCTION 'CLFM_SELECT_AUSP'
EXPORTING
mafid
='O'
classtype = l_klart
object = l_objek
TABLES
exp_ausp = l_tab_ausp
EXCEPTIONS
no_values = 1
OTHERS = 2.
READ TABLE l_tab_ausp INTO l_wa_ausp WITH KEY atinn = l_atinn.
MOVE l_wa_ausp-atwrt TO g_wa_final-zzp_kmat_id.
PERFORM get_characterisitics USING c_chr_nam_002.
READ TABLE l_tab_ausp INTO l_wa_ausp WITH KEY atinn = l_atinn.
MOVE l_wa_ausp-atwrt TO g_wa_final-zprogram.
PERFORM get_characterisitics USING c_chr_nam_003.
READ TABLE l_tab_ausp INTO l_wa_ausp WITH KEY atinn = l_atinn.
MOVE l_wa_ausp-atwrt TO g_wa_final-product_type.
hope this code helps..
thx
rams
Similar Messages
-
Link between Sales order and Credit master sheet
Hi,
Plz explain the link between sales order and credit master sheet.
Thanks and regards
CSRHi,
Credit master is related to Customer.
Credit limit will be assigned to a customer by using the T.Code FD32.
Credit control area will be assigned to a customer.
You can the credit control area for a customer in the table "KNVV".
Goto the T.Code "FD32".Enter your customer number and credit control area.Select the status tab.
Here you can maintain the credit limit.If you leave blank means the limit is 0.00.
Next thing is goto the T.Code "OVAK".
Select your sales order.Maintain the "Credit limit check" for your order type.
Goto the T.Code "OVA8".Select your valid combination.Here,you can activate either the static or dynamic credit limit checks.
If you create the sales order by using the customer,initially the system will check for the credit limit.If it is 0.00 and credit check functionality is activatd in the above specified T.Codes,then creditcheck will happen and order will be blocked for releasing of credit by using the T.Code "VKM3".Authorised persons have to release this credit block.Suppose,you have maintained this credit limit as "1000Rs/-" and you are creating the order of value "550Rs/-",then your order will not be blocked even though the credit check functionality is activated for your order type.
In this way,sales order is in turn related to credit master.
Regards,
Krishna. -
Link between sales order to Credit management
Where can we link between sales order to Credit management?
HI Gopala rao.,
In VOV8 sales document type there is <b>credit limit & Credit group</b> Where we asign the credit mage,ment data to Order
The configuration part of credit managemnt is
CREDIT MANAGEMENT:
A credit limit may be a customers credit limit, which is the permitted limit of value of open items, such as invoices not yet paid, plus the value of open sales orders.
The credit limit is the total combined value of the following documents:
Net value of sales order
Open Sales order: order created, but not delivered
Open deliveries: delivered, but not invoiced
Open billing doc: value of billing doc, which has not yet been forwarded to accounting
Open items: forwarded to accounting, but not settled.
Types of Credit Check
Simple Credit Check
Automatic Credit Check
o Static
o Dynamic
Simple Credit Check:
SPRO- IMG- SD- Basic Functions- Credit Mgmt/ Risk Mgmt- Simple Credit Check- Assign Credit Check to Doc Types.
Based on sales doc types
It will check all the above-mentioned docs & if the credit limit exceeds, the system responds in the way defined by you in the configuration menu.
Cannot differentiate according to customer
3 ways to Control the Simple Credit Check:
A: warning
B: error message: the doc cannot be saved
C: warning message with delivery block: the doc can be saved but is automatically blocked for delivery.
Automatic Credit Check:
This credit mgmt control is maintained by using the automatic credit control functionality. The automatic credit control divides the sales doc types, the delivery doc types, & goods issue into specific credit groups. It also uses the customers risk category as assigned to the CMD of the payer & assigns an outcome proc to the combination of the above 2 objects, i.e. the credit group & customer risk category along with the credit control area. The definition of customers risk category is carried out in the fin accounting module.
A customers risk category is a grouping category that controls the credit check when automatic credit control takes place. Thus one can assign high-risk customers to risk category for e.g. A01, medium risk to B01 and low risk to C01.
Automatic credit check divides customers in to 3 categories:
High-risk customers,
Low risk customers &
Medium risk customers.
A credit check can only occur at 3 places: Credit Group
Sales order: for high risk customers
Delivery: for medium risk customers
Goods Issue: for low risk customers
Credit Control Area (CCA): highest organizational element in credit management. A credit control area is an organizational unit that is comprised of one or more company codes. A company code can have no more than one credit control area. Defined by FI.
Menu Path to create Credit Control Area: OB45: FI people.
SPRO- IMG- Enterprise Stru- Definition- Fin Accounting- Define Credit Control Area
Credit Control Area Description
0001 Credit control area 0001
1000 Credit control area Europe
Menu Path to Assign Company Code to Credit Control Area: OB38: FI people.
SPRO- IMG- Ent Stru- Assignment- Fin Accounting- Assign Comp Code to CCA
It is possible to assign Credit Control Area to a Sales Area. This is more specific assignment than the assignment to Company Code.
Company code Company name City Credit Control Area Over write CCA
Menu Path for Defining Risk Categories: OB01: FI people
SPRO- IMG- Fin Accounting- Account Receivables & Payables- Credit Mgmt- Credit Control Account- Define Risk Categories.
Risk Category CCA Name
001 4500 Low risk
002 4500 Medium risk
003 4500 High risk
Menu Path for defining Credit Groups: OVA6
SPRO- IMG- SD- Basic Function- Credit Mgmt/ Risk Mgmt- Credit Mgmt:
Define Credit Groups: OVA6
Assign Credit Groups to Sales Docs & Delivery Docs
o Credit Limit check for Order Types: OVAK
o Credit Limit check for Delivery Types: OVAD
Define Automatic Credit Control: OVA8
Define Credit Croups: OVA6
One merely creates a credit group for each differentiation in the doc type. You enter the credit groups when you configure the sales doc types for credit management & define the automatic credit check. The following credit groups are contained in the standard R/3 system:
01: credit group for sales order
02: credit group for delivery
03: credit group for goods issue
CG (Credit Group) Doc Credit Group
01 Credit group for sales order
02 Credit group for delivery
03 Credit group for goods issue
Assign Sales Documents & Delivery Documents:
Sales Doc Type Descp Check Credit Credit Group
OR Std Order D 01
Delivery Type Descp Del Credit Group GI Credit Group
LF Delivery 02 03
Define for each sales doc type whether a credit check should be carried out. Enter D if an automatic credit check should be carried out.
Specify a Credit Group
Specify a Credit Group for the Delivery Type for which you want to carry out a credit check
Specify a Goods Issue Credit Group for the Delivery Type for which a credit check is to be carried out for goods issue.
SIMPLE CREDIT CHECK CANNOT BE ASSIGNED TO DOCUMENTS.
Define Automatic Credit Control:
One can now assign settings to the combination of the Credit Control Area, the Customer Risk Category & the Credit Group.
CCA Risk Cat Credit Group Credit Control
4500 001 01 Low risk sales orders
4500 001 02 Low risk deliveries
4500 001 03 Low risk goods issue
4500 002 01 Medium risk sales orders
4500 002 02 Medium risk deliveries
4500 002 03 Medium risk goods issue
4500 003 01 High risk sales orders
4500 003 02 High risk deliveries
4500 003 03 High risk goods issue
Select line item and go to details, you can decide whether to do Static or Dynamic Credit Check. Credit Horizon can also assigned here. Additional function checks can be performed here:
A credit check when the maximum document value is exceeded.
A credit check when changing critical fields.
The risk category assignment occurs in the same place as the customers credit limit, which is the customers credit management screen. That is, the risk category is assigned to the customer by the Finance in transaction code FD32.
The customer credit master record is divided in to 5 views:
Overview Screen: gives an overview of credit settings in relation to the customer, including his credit limit, credit exposure, the %tage of credit limit used, his payment data & his risk category.
Address: view gives the customers address details as they appear in CMD
Central Data: is a view that shows the total credit limit the customer can receive across all credit control areas as well as the maximum limit he can receive in one credit control area.
Status: view shows the customers actual individual details according to particular CCA being investigated. This includes his credit limit, percentage used, credit exposure, risk category, whether he is blocked due to credit or not.
Payment history: view displays the payments made by the customer for a particular credit control area where a comp code is assigned.
Static Credit Check Dynamic Credit Check
Net Doc Value Net Doc Value
Open Order Open Order
Open Delivery Open Delivery
Open Billing Open Billing
Open Item Open Item
Compares the total combined values of the above-mentioned documents to credit limit. Plus credit horizon. Compares the values of the following documents to credit limit + credit horizon.
Credit horizon has an attached time period that states that the system is not to include sales orders in the total of outstanding items created after that specified period i.e. for the purpose of evaluating credit, you want the system to ignore all open orders that are due for delivery after the horizon date. Maintained for low & medium risk customers.
Update Groups
Basically it is a info structure where system stores all the data about credit limit. The credit relevant data is updated in a info structure, where it is accessed & updated. Thus each automatic credit control must be assigned an update group.
Update Group 000012
Update Group 000015: delivery & billing
Update Group 000018: sales order, delivery & billing.
Update group 000012, updates at:
Sales doc: increased order value
Delivery: decreased order value & increased delivery value
Billing: decreased delivery value & increased billing amount
Invoice: decreased billing amount & increased open item value.
Release Blocked Sales Order/ Deliveries:
VKM3: sales order
VKM5: delivery
VKM4: both
One can see the offending document. Note on the right hand side, the Status Field. This shows the check, the doc failed. If this field is empty, the doc did not fail a credit check, even though it may be in the list of SD documents that are required to be released.
To release the doc, one indicates the doc to be released and then clicks on the Release Button. The result is the offending doc entry, highlighted green. One then proceeds to save, after which you are informed the doc number has been released.
Net value with sub total A, in pricing proc, will be the basis for credit limit.
REWARD if helpfull
Thanks & Regards
Narayana
Message was edited by:
manam narayana -
Regarding creating a LOOSE LINK between Sales Order and Vehicle
Hi,
Does anyone has any idea on how to establish a LOOSE LINK between Sales Order and Vehicle using BAPI_VEHICLE_CREATE or any other Function module.
Any help will be highly appreciated and rewarded.
Kind Regards,
TanujaDear Kumar,
Strategy - 40
Consumption of PIR (not Redution)
1) the first point in strategy in 40 is, incoming sales order consumes PIR
2 )both sales order and PIR takes place in MRP planning run
2) this is where it is in mostly used in many indutries
just a small example how this strategy works
1) creat PIR for ur FERT- 100Nos
2) check in MD04- u will get PIR (VSF) as 100
3) now creat sales order for 120 for same month
4 )run MRP for that particular FERT
5) check the result in MD04, here ur PIR gets vanishied and an plan order will be generated for 120 Nos.
Regards
kumar
Edited by: kumar kumar on Jul 22, 2009 8:29 AM -
Link Between Sales Order Type and Customer/Material Exclusion
Hi,
Any one know the Link Between Sales Order Type and Customer/Material exclusion tables (Transaction: VB03 ) ?Hello,
For Tcode VB03 you can check KOTG001 for Customer/Material.
Thanks &Regards,
Abhijit -
Linking between Sales order data and Biling condition
Hi Bwers,
Currently we are geneating a report with Sales order Item level (2lis_11_VAITM) information and Biling conditions(2lis_13_VDKON). We have respective DSO for both datasources (Sales order DSO and Biling Condition DSO). We have to pull both information into a report.
We have sales order number (0DOC_NUM) in Sales DSO and Biling document number (0BILL_NUMber) in Biling DSO. And we found Sales order Number (0BILL_NUM_0DOC_NUMB) as an navigational attribute for Biling DSO.
We are trying to extract Billing condition type and Billing condition value from Billing DSO.
Now the question's are:
1. Can I use Sales order number as linking field for Both DSO' or not. Though It is an Navigational attribute for Biling document number in Biling DSO.
2. Is the Sales order number and Billing Document number both are same or not. What is the linking field between sales order info to Biling info.
2. How to bring Sales order info and Biling info into a report through Infoset. If infoset which link should I use bring both info into a report.
3. Or Multiprovider is the right one.
3. Please let me know if any other linking fields are existed between these two datasources other than Sales order.
All the helpful answers are awareded with full points.
Regards,
Venkat1. Can I use Sales order number as linking field for Both DSO' or not. Though It is an Navigational attribute for Biling document number in Biling DSO.
- yes you can link, Navigation attrbute does not matter
2. Is the Sales order number and Billing Document number both are same or not. What is the linking field between sales order info to Biling info.
--one sales order number may correspond to different billing number including the one which shares the same number.
2. How to bring Sales order info and Biling info into a report through Infoset. If infoset which link should I use bring both info into a report.
-- Multiprovider is the best option while dealing with such cases.
3. Or Multiprovider is the right one.
--yes.
3. Please let me know if any other linking fields are existed between these two datasources other than Sales order.
there may be possibilty of other fields also like Profit center, Controling area etc depending upon your project requirment -
Linking Between Sales Order And Purchase ORder
Dear Gurus,
How to link the Sales Order Number and Purchase Order Number. I know the Sales Order Number and I need the tables from which I can know the Purchase Order Numbers for that Sales Order Number.
Points will be awarded.
Thanks,
RaviHi,
Goto Table Mseg-kdauf is sales order no.
get mseg-ebeln is purchase order.
Or u can do the following code.
from sales order no VBELN get VBFA-VBELV.
SELECT SINGLE vbeln FROM likp
INTO l_delno
WHERE vbeln = vbfa-vbelv.
SELECT SINGLE ebeln
INTO l_sono
FROM ekbe
WHERE belnr = l_delno
AND bewtp = 'L' .
L_DELNO IS PURCHASE ORDER.
If it is helpfull pls reward it.
Regards
Srimanta -
Link between sales order and purchase order
plz explain the link between the sales order and purchase request
Hi Javed,
Their are 2 scenario for this.
1) You create a sales order and the system automatically creates a PR and then you convert to PO.This is third party sales.In PO account assignment the sales order number is directly copied to the PR And PO.
2) You create a PO wrt to SO .The goods received will be reserved for that SO. third party PO Vendor will directly deliver the goods to customer.The delivery address is copied from sales order.
Techincally
EKKN table you have sales order and Item fields (VBELN and POSNR)
using these fields search for the deliveries in LIPS table
EKKN-VBELN = LIPS-VGBEL and
EKKN-POSNR = LIPS-VGPOS
Edited by: Raj on Jun 19, 2008 6:58 PM -
API to create a link between Sales order and Requisition
We are upgrade 11i to R12. We have a custom drop ship process. We have a original SO and through the sales order we create a Reqisition. We send the requisition details to the factory and the factory sends us a flat file with the quantity shipped and dates. There might be multiple lines for each requisition received. We will add the details to the SO and update the Requision with the flat file details for the SO shipment. But We will have to create a link between the SO and the requisition. Is there an API to do the linking between a SO and A requisition line?
I created a SO and a requisition
declare
p_rsv inv_reservation_global.mtl_reservation_rec_type;
p_dummy_sn inv_reservation_global.serial_number_tbl_type;
x_msg_count NUMBER;
x_msg_data VARCHAR2(240);
x_rsv_id NUMBER;
x_dummy_sn inv_reservation_global.serial_number_tbl_type;
x_status VARCHAR2(1);
x_qty NUMBER;
l_inventory_item_id number;
l_source_header_id number;
l_reservation_qty number;
l_error_message VARCHAR2(300);
l_order_number NUMBER;
begin
fnd_global.APPS_Initialize(1131,50654,660);
p_rsv.reservation_id := NULL;
p_rsv.requirement_date := to_date('30-JUN-2012','DD-MON-YYYY');
p_rsv.organization_id := 88; ---ship_from_org_id
p_rsv.inventory_item_id := 147001; --inventory_item_id
p_rsv.demand_source_type_id := inv_reservation_global.g_source_type_oe;
p_rsv.demand_source_name := NULL;-------'SALES ORDER';
p_rsv.demand_source_header_id := 27005; --- sales order header id
p_rsv.demand_source_line_id := 29010; --- sales order line id
p_rsv.primary_uom_code := 'EA';
p_rsv.primary_uom_id := NULL;
p_rsv.reservation_uom_code := 'EA';
p_rsv.reservation_uom_id := NULL;
p_rsv.reservation_quantity := 200;
p_rsv.primary_reservation_quantity := 200;
----p_rsv.supply_source_type_id := inv_reservation_global.g_source_type_internal_req;
p_rsv.supply_source_type_id :=inv_reservation_global.g_source_type_inv;
p_rsv.supply_source_header_id :=18001; -- requisition header id
p_rsv.supply_source_line_id :=12172; -- requisition line id
p_rsv.supply_source_name := NULL;
p_rsv.supply_source_line_detail := NULL;
p_rsv.autodetail_group_id := NULL;
p_rsv.external_source_code := NULL;
p_rsv.external_source_line_id := NULL;
p_rsv.supply_source_line_detail := NULL;
p_rsv.revision := NULL;
p_rsv.subinventory_code := NULL;
p_rsv.subinventory_id := NULL;
p_rsv.locator_id := NULL;
p_rsv.lot_number := NULL;
p_rsv.lot_number_id := NULL;
p_rsv.pick_slip_number := NULL;
p_rsv.lpn_id := NULL;
p_rsv.attribute_category := NULL;
p_rsv.ship_ready_flag := NULL;
p_rsv.demand_source_delivery := NULL;
p_rsv.attribute1 := NULL;
p_rsv.attribute2 := NULL;
p_rsv.attribute3 := NULL;
p_rsv.attribute4 := NULL;
p_rsv.attribute5 := NULL;
p_rsv.attribute6 := NULL;
p_rsv.attribute7 := NULL;
p_rsv.attribute8 := NULL;
p_rsv.attribute9 := NULL;
p_rsv.attribute10 := NULL;
p_rsv.attribute11 := NULL;
p_rsv.attribute12 := NULL;
p_rsv.attribute13 := NULL;
p_rsv.attribute14 := NULL;
p_rsv.attribute15 := NULL;
inv_reservation_pub.create_reservation
p_api_version_number => 1.0
, x_return_status => x_status
, x_msg_count => x_msg_count
, x_msg_data => x_msg_data
, p_rsv_rec => p_rsv
, p_serial_number => p_dummy_sn
, x_serial_number => x_dummy_sn
, x_quantity_reserved => x_qty
, x_reservation_id => x_rsv_id
IF x_status='S' THEN --- HARD RESERVATION IS DONE SUCCESFULLY ---
dbms_output.put_line('reservation succesful');
dbms_output.put_line('reservation id: || x_rsv_id');
ELSE
if(nvl(x_msg_count,0) = 0) then
dbms_output.put_line('no message return');
else
for I in 1..x_msg_count LOOP
l_error_message := fnd_msg_pub.get(I, 'F');
end LOOP;
end if;
--- HARD RESERVATION API fails ---
dbms_output.put_line('Reservation API Error Message: '||l_error_message);
END IF;
EXCEPTION
WHEN OTHERS THEN ------------------ In case of any pl/sql error
l_error_message := SQLERRM;
dbms_output.put_line('Plsql Error Message: '||l_error_message);
END;
but i am getting an error
"Reservation API Error Message: INV_RSV_DS_SO"
I am stuck and no idea how to fix this. Any help is appreciated.
Edited by: 901524 on May 23, 2012 1:26 PM -
Link between sales order-delivery-invoices
Hi all,
I need to display an order , the delivery that is based on the order , the invoice based on this delivery...
I need to find a link property between them ...
Plz help...
OlaThe links between the documents are held at the item line level.
The BaseEntry property, BaseLine property, and BaseType property are used to link from one document to another. On your invoice these would contain pointers to the delivery it was based on, on the delivery these would contain pointers to the sales order.
BaseType contains a BoObjectTypes reference (eg. Sales Order = 17) to let you know what type of document the line was based on.
BaseEntry contains the document key to the originating document.
BaseLine indicates which line number on the original document the current line was based on.
John. -
Crystal report link between sales order and picklist
Hi,
Good day!
I am making a picklist document using crysal report. My requirement is to show the sales order number, cardcode, cardname, itemcode, released qty in the picklist. the tables i linked in crystal are the ff:
RDR1.DocEntry linked to ORDR.DocEntry and ORDR.DocNum linked to PKL1.OrderEntry.
I have a sales order with 2 items and then I processed picklist for it. When I run the report, my problem is that it shows the items twice.
Scenario:
Sales Order 1:
Item A 2
Item B 1
When I run the report, it's like this:
Item A 2
Item A 1
Item B 2
Item B 1
I'd already tried adjusting the links but still can't get it.
Please help me.
Thanks so much.
SIncerely,
JackilouHi,
could you please describe how you solve this issue?
Thank you very much!
Regards,
Tobias -
Link Between Sales Order - Internal Requisition - Internal Sale Order
Hi Expert,
I tried writing the query to find the supply and demand details in ASCP Planning.
In our scenario we created a sales order '5110416.AT PROJECT.ORDER ENTRY(6.1)' and launch the plan. It has created the plan order and after releasing it has created the internal requisition and then Internal sales order. But the supply sales order number is not populated in order_number column of msc_supplies.
Please help me if I am missing some thing. Just for your info I have run the plan again and then also its not updated. Below is the query which I have written. This is very critical for me. Please advice.
SELECT
MS.ORDER_NUMBER,MS.ORDER_TYPE,MS.ORDER_LINE_NUMBER,MD.SALES_ORDER_LINE_ID,MD.ORDER_NUMBER
FROM
MSC_SUPPLIES MS,
MSC_FULL_PEGGING MFP,
MSC_DEMANDS MD
WHERE 1=1
AND MS.TRANSACTION_ID=MFP.TRANSACTION_ID
AND MD.DEMAND_ID=MFP.DEMAND_ID
AND MD.ORDER_NUMBER='5110416.AT PROJECT.ORDER ENTRY(6.1)'
Thanks in advance.
Regards
RVHi Suraj,
In MSC Supplies Order_Number column contains the information for Planned Order, but not the Sales order. This same planned order number, once released from planning workbench, would be become the Work Order number of Purchase Req number, depending on the item make/buy code.
However, if you would like to see the supply created for the particular SO, then you also need to create a join for MSC_Sales_orders table in your query. Sales orders after collection are stored in this table. Once the plan is run, relevant SO come into MSC_Demands with origination_type = 30
Hope this answers your question.
Regards,
Kanishk Maheshwari. -
Urgent: Link between Sales Order and Shipment Number In Extractor
Hello Gurus,
In my project we are using Extractors
2lis_08 , 2lis_11, 2lis_12, 2lis_13....
now the main problem was in the reporting client want
as below
Shipment no SalesOrder No Price
Can any one help me how to link the SalesOrder Number and Shipment Number by using the above extractors..
Either the development must be do on backend are at front end any thing which helps...
please through some light...
Thanks In advance
SandyHello all,
VBAK-VBELN=LIPS-VGBEL
LIPS-VBELN=LIKP-VBELN=VTTP-VBELN
VTTP-TKNUM(Shipment number)
Finally
LIPS-VGBEL(SD Number)
LIPS-VBELN=VTTP-VBELN
VTTP-TKNUM
Hope it help others!!! -
Link between process order and sales order for planning strategy 52
Hello,
I investigate the possibility of a link between "sales order" and "planned order / process order" for the usage of planning strategy 52 (planning w/o final assembly, make to stock).
I know, this is not conform to the basics of planning strategies (EITHER make to order OR make to stock) and I suspect it would be a modification. Of course we have the alternative "make to order" - strategy 50, but we do not want to use individual customer stocks.
Is anybody there with similar customer requirements or project experiences?
Thanks in advance,
Joerg
Message was edited by:
Jörg DemtschukHi Jorg,
To my understanding if you need hard pegging then in SAP only Individual requirement is possible.
Or else you need to create a custom transactions/table to identify Sale order and when ever a process order is created by selecting the sale order record, the process order detials should also get updated against that.
You need to take the help of ABAP expert for this,
Regards,
Prasobh
Reward points if this was useful -
Purchase Requisition & Planned Order link to sales order
Dear Gurus,
please help me to find the link between
- sales order item
and
- ( purchase requisition & Planned orders for semi-finished )
that created from running the MRP.
dispite we can see all these data in one screen
in TCode (MD4C) or (MD09)
thnak you .
Edited by: Alvaro Tejada Galindo on Feb 5, 2008 10:50 AMHi,
For third party order, either you can create the material master with item category group as BANS, so the system will automatically pick TAS in the sales order for the material or you can change the item category manually to TAS in the order.
This will trigger a PR, based on the PR a PO will be generated.
Defining Item Category Group
IMG ® Sales and Distribution ® Sales ® Sales Documents ® Sales Document Item ® Define Item category groups
Defining Item CategorySales and Distribution ® Sales ® Sales Documents ® Sales Document Item ® Define Item Categories
Item category TAS
Description 3rd party with SN CM
Item type Blank
Completion rule Blank
Special stock Blank
Relevant for billing B
Billing plan type Blank
Billing block Blank
Pricing X
Statistical value Blank
Revenue recognition Blank
Delimit. start date Blank
Business data item X
Sched. line allowed X
Item relev. for delivery Blank
Returns Blank
Weight/Vol.- relevant X
Credit active X
Determine cost X
Aut. batch determ. Blank
Rounding permitted Blank
Order qty = 1 Blank
Incomplete proced. 28
PartnerDetermProced T
TextDetermProcedure 01
Item cat. status group 1
Screen seq. group N
Status profile Blank
Create PO autom. Blank
Config. strategy Blank
Mat. variant action Blank
ATP material variant Blank
Structure scope Blank
Application Blank
Value contract material Blank
Contract release ctrl Blank
Repair procedure Blank
Billing form Blank
DIP profile Blank
Assigning Item Category
IMG Sales and Distribution Sales Sales Documents Sales Document Item Assign Item categories
Creating Material
MM01
1. On the screen Create Material (Initial Screen) enter the material number if External.
2. Choose Select View(s). (Basic View 1&2, Sales Views, Purchasing views and accounting views).
3. Enter the relevant data and save the material. Use material group BANS in the item material group field.
Creating SD Pricing Conditions for material
VK11
Creating Vendor Master
XK01
Regards
Maybe you are looking for
-
I can't save changes to my PDF document?
I downloaded a PDF document from Google Chrome onto my desktop. (It's a job application). However, every time I make changes to it, click save, and then open it up again using Preview, none of my changes have saved. Help?
-
Need Help for useOneAsmany function
My input structure is <Record> 1- unbounded <header> 1-1 <Data1> 1-unbounded <data2> 1-unbounded <footer> 1-1 i want to create the IDOC for data1 and data2 and using the he
-
4215 IPS 5.x analysis engine woes
I've got about 20 4215's that i'm upgrading from 4.1 to 5.x Like everyone else I've had nothing but problems with the 5.1x (analysis engine just stops running) I've tried upgrading using a brand new image, using both the 5.0(1) and 5.0(2) images. How
-
Preflight panel too persistent; want it gone
Not sure why the panel is always there when I start InDesign. I've hidden the panel with no document open, I've resaved my workspace, and still it persists. Anyone else?
-
Unable to back up Itunes library to disc
Have been trying to backup my library to disc .Itunes checks my media, says I need 19 discs ,initialises the dvd-r disc in the drive and then appears to start writing to disc but after about 5 minutes it comes up with an error 4483 and says unknown e