Link errors for Labwindows CVI.

I am currently trying to implement the exer1.cws example from the Cvi sample and tutorials section.
But i get 9 Link errors while trying to generate the DLL.
I have attached the Link errors as a txt file.
Please tell me whats wrong with the program??
I have incorporated the RTmain as entry point function of the program.
I have initialised variables used in the main program globally.
Other user interface functions have also been defined outside the body of the Rtmain program.
Hope this info is sufficient.
Regards
raghu
Solved!
Go to Solution.
Attachments:
ERRORS.txt ‏1 KB

Hey , Thanks for the reply.
The tutorial asks us to select the Option as 'Real Time Only'.
I reverted to 'Full Run-time engine' as you asked.
But there is no change.
Although i did debug most of the erros.
I just included the Functions in the headerfile.
But even though, i am stuck with two errors.
I am attaching the complete set as txt file.
Please see if you notice anything unorderly.
Attachments:
ERRORS.txt ‏1 KB
exer1.c ‏3 KB
exer1.h ‏2 KB

Similar Messages

SCPI Instrument driver for LabWindows/CVI ?

Is there somthing like a plain SCPI instrument driver for LabWindows/CVI
that works with all SCPI-DMMs ?
Thanks,
Manfred

Manfred Schininger wrote:
> "Kevin B. Kent" schrieb im Newsbeitrag
> news:[email protected]..
> > Manfred Schininger wrote:
> >
> > > Is there somthing like a plain SCPI instrument driver for LabWindows/CVI
> > > that works with all SCPI-DMMs ?
> > >
> > > Thanks,
> > > Manfred
> >
> > SCPI like any other standard is typically non-standard.
> > You can try to get a DMM driver and it will probably work
> > for the most part with any DMM. There may be some
> > slight differences and some features may not work on all DMMs.
> >
> > I might suggest you look into IVI drivers. These follow SCPI for the most
> > part. You get the drivers for each DMM you want and then you have a
> > configuration
file that tells the program which DMM you are using.
> > It then loads the appropriate driver.
> >
> > Kevin Kent
>
> Hello Kevin,
>
> thank you for your answer.
> Unfortunately there is no specific instrument-driver for the DMM I'd like to
> use (Keithley 2700). As I understand this would be the precondition for the
> IVI base classes to work. My hope was to find a simple SCPI instrument
> driver to get into the advantage of instrument independence. But you are
> right, I also once made the experiance that the "SCPI standard" isn't
> completely perfect.
>
> Manfred
Manfred,
You could look for a driver for another Keithly model or try one for a
different brand. They may be similar enough to modify easily. I realize this
goes against the idea of SCPI and standards but it is the best we have now.
Good Luck
Kevin

Trying to resolve a "_OBJC_METACLASS_$_CDVCommandQueue" with MainViewControllers.a, MainViewControllers.o, 7 in total. Apple Mach-O Linker error for all 7. Thanks to any assistance.

Trying to resolve a "_OBJC_METACLASS_$_CDVCommandQueue" with MainViewControllers.a, MainViewControllers.o, 7 in total. Apple Mach-O Linker error for all 7. Thanks to any assistance.

No I didn't even read through your post, to long.
You said that "No matter what program I try to install, as soon as the installer opens it crashes". Were you talking about the install for this/these 3D programs or ANY program? As it is worded it sounded like ANY program. That tells me there is a problem with your Mac, software or hardware.
Now you say others install programs, which is it. Programs other then the 3D ones install or no programs install?
Could simply be your Mac is to old to run these programs and the installer knows that. You never said what model or year Mac it is.

Link error for distribution

Hi, I received an email with the link to download the new version of flash player for distribution, but does not work
Dear Miguel Ángel Abarca,
Thank you for submitting a request to distribute Adobe® Software. Your request has been approved, and you may now distribute the Adobe® Software listed below, subject to the terms and conditions set forth in the Adobe Reader and Runtime Software Distribution License Agreement.
Approved Software:
Adobe® Flash® Player
Adobe® Reader® Software
Attached is an Adobe Portable Document Format (PDF) file of the distribution license agreement. Please keep this file for your records. The agreement is valid for one year, after that one year you can renew the distribution license agreement by following the same process.
Below you will find the necessary details and download links for the product(s) that you have been approved.
Adobe® Flash® Player
To download the Flash Player version that you would like to distribute, please visit the following URL:
http://www.adobe.com/products/flashplayer/distribution4.html?auth=<number>

Hello, here paste part of message:
To download the Flash Player version that you would like to distribute,
please visit the following URL:
http://www.adobe.com/products/flashplayer/distribution4.html?auth=4358bc39-5e77-4893-99cf- 9f7c7a8d5456
*You may not share the above link, share information with others, or
publish the above link on websites, blogs, or by any other means that
can be publicly accessed. The information contained on this site is
meant for your use only in accordance with Adobe Flash Player
Distribution License Agreement you accepted. You may direct others to
http://www.adobe.com/products/players/fpsh_distribution1.html to request
distribution rights.
El 13/01/2015 a las 17:53, m_vargas escribió:
>
Link error for distribution
created by m_vargas <https://forums.adobe.com/people/m_vargas> in
/Installing Flash Player/ - View the full discussion
<https://forums.adobe.com/message/7091835#7091835>

Link error for simpapp

after installing tuxedo, and compiled the simpapp application, started the service toupper as described. i faild with the simpcl.exe. it the ordinal number 14 is missing in the LIBFML.dll. could anyone please tell mit the propper link settings.
i am using msvc 6.0
thanks.
chris.

Hello, here paste part of message:
To download the Flash Player version that you would like to distribute,
please visit the following URL:
http://www.adobe.com/products/flashplayer/distribution4.html?auth=4358bc39-5e77-4893-99cf- 9f7c7a8d5456
*You may not share the above link, share information with others, or
publish the above link on websites, blogs, or by any other means that
can be publicly accessed. The information contained on this site is
meant for your use only in accordance with Adobe Flash Player
Distribution License Agreement you accepted. You may direct others to
http://www.adobe.com/products/players/fpsh_distribution1.html to request
distribution rights.
El 13/01/2015 a las 17:53, m_vargas escribió:
>
Link error for distribution
created by m_vargas <https://forums.adobe.com/people/m_vargas> in
/Installing Flash Player/ - View the full discussion
<https://forums.adobe.com/message/7091835#7091835>

How's NI's support for LabWindows/CVI? How's it likely to be in the future?

Hello Fellow LabWindows/CVI Users,
Have you found that National Instruments provides good support for LabWindows/CVI? If so, do you expect good support to continue in the future?
Thanks,
Gayle Roth

Duplicated post
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

VC++ 6 Linker Errors from converted CVI project

I am getting numerous LNK2005 link errors for functions within the following .obj files: easytab.obj
inifile.obj
toolbar.obj
The weird thing is that all of them say that the functions are like this:
toolbar.obj : error LNK2005: _Toolbar_GetCtrlFromDescription already defined in toolbar.obj
I also get several LNK2001 errors (unresolved external symbol)
Any help will be greatly appreciated.
Thanks,
Richard

It sounds like you have these OBJ files included twice in the VC++ project. Check and see in the Project->Settings... under the Link tab if they are listed twice. If they are, remove the duplicate entries. Even if they aren't you may want to try removing them from this list in case they are being linked again in another way.
Best Regards,
Chris Matthews
Measurement Studio Support Manager

Need exmamples for FP-CTR-502 for LabWindows/CVI

I am looking for examples for the FP-CTR-502 for LabWindows/CVI. Any help appreciated!

Currently, there are no 'official' examples for the 502/500 in CVI. However, there are some examples in the work.
I did make a very simple example to measure frequency using a user-specified gate width. This CVI project is attached.
Joji
Attachments:
FPCTR.zip ‏516 KB

Add Transparency Attribute for LabWindows/CVI Panels

Add an attribute for LabWindows/CVI panels for setting transparency.
Currently, in order to achieve this behaviour users are forced to workaround this using Windows API.
Having an attribute for this purpose would allow users to benefit from this functionality more easily and would make LabWindows/CVI programs more cleaner.
Related forum discussion: http://forums.ni.com/t5/LabWindows-CVI/Transparent-Main-Panel/m-p/3172386

Greetings LabWindows/CVI enthusiasts,
I am pleased to inform you that the LabWindows/CVI Real-Time Module Beta Program is now open.
If you are interested in participating in the program, we encourage you to request participation by visiting www.ni.com/beta and choosing to register for the LabWindows/CVI Real-Time beta from the drop-down menu. All previous beta users must re-register for the LabWindows/CVI Real-Time Beta to ensure we have up-to-date information. This is a separate beat program from the LabWindows/CVI Beta and must be registered for separately.
National Instruments
Product Support Engineer

Yokogawa UT driver for LabWindows/CVI 6.0 won't translate to LabVIEW 8.6?

The device driver for the Yokogawa UT series furnace controllers is in LabWindows/CVI 6.0 and I would like to use it in LabVIEW. I tried to use the utility to convert from LabWindows/CVI to LabVIEW, but it said it couldn't and that the device driver is from before LabWindows/CVI 5.01.
In any case, here is the series of events.
I downloaded the LabWindows/CVI to LabVIEW Converter, from
the page on LabVIEW's developer's connection that had the driver for the
Yokogawa UT controller.
From an empty LabVIEW Block Diagram, I click
Tools>>Instrumentation>>Create LabVIEW Interface to LabWindows/CVI
Instrument Driver...
This takes a little while to load. During loading an
FC_Interface_Main.vi runs, apparently trying to find a file.
Once that is done, the two options are Basic and Advanced. I leave
basic selected. I click next. browse to find the ykut.fp file from the
driver I downloaded.
I then click next. The error window that is seen in the screen shot is
then shown.
I called a tech support guy at NI about this, and I e-mailed him with all the above, but there was no reply, though the conversion utility is no longer available on the same web page as this specific device driver.
In any case, if anybody could give a little guidance, it would be appreciated.

Hello Screamingzebras,
I converted the .fp file to be version 5.5 and ran the utility that was mentioned. I have attached two files to this post. "ykut.zip" is the converted .fp file (version 5.5). "yut.zip" is the converted instrument driver.
Regards,
Jon S.
National Instruments
LabVIEW R&D
Attachments:
yut.zip ‏174 KB
ykut.zip ‏25 KB

Are there any exams for LabWindows/CVI for my assessment?

Hi
I'm new in CVI
I'm still studying its features
Can anyone give me a link where I can learn more about CVI, a tutorial perhaps.
I'm really interested about data manipulation and databases.
What database can I use with CVI?
And
Are there any exams I can take for the assessment of my knowledge about CVI?

Hi Kylie may,
On our website there are many helps for you to learn LabWindows/CVI.
1) Here is a link to the Getting Started manual
2) Additional Resources
3) Top 10 LabWindows/CVI Technical Resources
4) If you are interested in Database connectivity please take a look at the following link to the SQL Tool kit
5) As far as Exams that you can take here is a link to the information: NI Certified LabWindows™/CVI Developer (CCVID)
I hope that this helps.
Regards,
Perry S.
Applications Engineer
National Instruments

Link errors for NI-MAQdx examples

I’m getting link errors while debug compiling for all of the NIMAQdx examples. There are three of them and they start with Undefined symbol, then ‘_UPLIBBreadpointWithElab@16’ referenced in the .lib file. Using version CVI2013 and NI-MAQdx 4.2 Any suggestions? Thanks.
snelson

Hi Andy,
It's occurring on all of the examples IMAQdx examples. I have a 32-bit PC, but tried it also on a 64-bit with the same linking errors. I'm compiling in debug, but same errors during release version. I think I'm including all of the appropriate files. Attached is a screen shot.
Thanks,
snelson
snelson
Attachments:
screen shot.jpg ‏191 KB

Linking Errors for STL

Hi,
I am working on a porting project. I am porting code compiled earlier under gcc2.95 to Sun Workshop 6. We are using stl libraries in our code. I had made chages in code like
using std::sort;
using std::istream;
using std::ostream;
using std::vector;
using std::list;
but it gives link time errors like
ild: (undefined symbol) void std::__final_insertion_sort<int*>(__type_0,__type_0) -- referenced in the text segment of ../../studio_SOLARIS64/lib/leq.a(bdd_FAExpression.o)
ild: (undefined symbol) __type_1 std::copy<int*,int*>(__type_0,__type_0,__type_1) -- referenced in the text segment of ../../studio_SOLARIS64/lib/leq.a(bdd_FAExpression.o)
ild: (undefined symbol) void std::vector<FAExpression*,std::allocator<FAExpression*> >::__insert_aux(FAExpression**,FAExpression*const&) -- referenced in the text segment of ../../studio_SOLARIS64/lib/leq.a(bdd_FAExpression.o)
ild: (undefined symbol) void std::vector<FAExpression*,std::allocator<FAExpression*> >::__insert_aux(FAExpression**,FAExpression*const&) -- referenced in the text segment of ../../studio_SOLARIS64/lib/leq.a(leq_convert.o)
ild: (undefined symbol) void std::vector<FAMacroGroup*,std::allocator<FAMacroGroup*> >::__insert_aux(FAMacroGroup**,FAMacroGroup*const&) -- referenced in the text segment of ../../studio_SOLARIS64/lib/leq.a(bdd_FAExpression.o)
ild: (undefined symbol) void std::vector<FAMacro*,std::allocator<FAMacro*> >::__insert_aux(FAMacro**,FAMacro*const&) -- referenced in the text segment of ../../studio_SOLARIS64/lib/leq.a(bdd_FAExpression.o)
Can anyone help me to sort out thse problems. I would like to say thanks in advance.
Amandeep

Hi Amandeep!
I'm sorry that nobody answered you for 6 years. Maybe this answer will be useful for someone nowadays.
I had the same problem some time ago and I got to fix it after hard work and thinking.
This problem is specific for Sun WorkShop 6 update 2 C++ 5.3 2001/05/15.
First of all, the best solution is updating to the last version of Sun Studio if possible, because
the version mentioned above is an end-of-life one. If not possible, try the following.
Typically, you declare a vector and later add elements to it:
//Template is declared empty:
std::vector<ClassObject> ObjectVector;
// Later, when appendig an object is required, methods insert or push_back are used:
ObjectVector.push_back (Object);
// or
ObjectVector.insert (Position, Object);
But push_back and insert methods, among others, use __insert_aux method, that is not available.
However, there's an other way to handle a vector that avoid the use of those buggy methods
(buggy in this compiler version only):
int n = theNeededSize;
std::vector<ClassObject> ObjectVector (n);
int TemplateSize = n;
// Now objects in the template can be set properly.
for (size_type Index = 0; Index < TemplateSize; Index++)
     ObjectVector[Index].SetDataMethod1 (...);
     ObjectVector[Index].SetDataMethodN (...);
     // or ...
     ClassObject objectOfClassObject;
     ObjectVector[Index] = objectOfClassObject;
Using the constructor:
EXPLICIT vector (sizetype n)
: __start(0), __finish(0), __end_of_storage(0,Allocator())
T value = T();
__initn(n,value);
solves the problem.
In this thread there is more detailed information:
http://forum.java.sun.com/thread.jspa?threadID=5071034
Hope this is useful.
Bye.

Error installing LabWindows/CVI Trial

I got the following error while installing the trial version. Any siggestions?
Thanks!
Solved!
Go to Solution.

Hi Vladiator,
1) What happens if you click "Yes" to continue? Does the installation finish? If so, does CVI work? If not, are there additional errors given?
2) Do the specifications listed in the error match the specifications of your system?
3) I realize this is related to the previous question but specifically: is your processor architecture 32 or 64 bit?
4) What operating system are you using?
The error itself seems to be linked to corrupt system files, which is really a Windows error. The error description can be found here:
Hresult: 0x800736b3
http://www.pcmmc.com/hresult-0x800736b3.php
One thing you can try is executing the "sfc /scannow" command in an elevated command prompt. This will check your file system and fix some common errors. Instructions on how to do this can be found below:
Use the System File Checker tool to repair missing or corrupted system files
https://support.microsoft.com/en-us/kb/929833
There are several other websites offering solutions to this error. However, the ones I have been able to find are all third-party and fall under the "use at your own risk" category.
Thanks,
AC - LV Solver

Application error in labwindows/CVI 6.0

Dear All,
When i run Executable by Run meny >>>>Execute *.exe (Cltr+F5), after building a project and generating executable file, I have application error
comes 2 times.
What could be the reason for this?
Thanks
Regards
Vishnu
Solved!
Go to Solution.

If you read this thread,
the recommendation was to install the latest run-time engine.

Link errors for Labwindows CVI.

Similar Messages

Maybe you are looking for