Link of 103 and 105 material document

Hi Friends,
we are doing GRN with movements 103 and 105.when we do a release block stock transaction the system should update the 103 document against the 105 document in the table MSEG in the field LFBNR. however the system does this only if the GR based IV tick is maintained. this tick may or may not be maintained for all vendors. however the system will surely maintain some link so that once 103 is done the 105 can be done only once. we are trying to work out a complex report and need to know where does the system maintain the linkage apart from the LFBNR field.Can you help please.
thanks in advance
Gurvinder

Hi,
You need to maintain GR IV in case you want to maintain relationship between 103 doc, 105 doc & IV doc.
Reference Doc field is activated only when you select GR IV.
In case you do not maintain GR IV , system works on PO Base IV.
Regards
Sanjay Kohli

Similar Messages

  • Referance material document of 103 is not updating in 105 material document

    Dear All,
    I have created a Good Receipt through MIGO using 103 movement. Later I have created 105 movement with respect to 103 movement reference through release blocked stock.
    After creation of documents, when checked the document created through 105 movement there is no reference number of 103 document number found in the document number of 105 movement.
    In the table MSEG field LFBNR is supposed to get updated with the reference number of the document created through 103 movement.
    In this case, this reference number is not updated in the table MSEG-LFBNR.
    What is the reason for Referance material document of 103 is not updating in 105 material document at item level in Purchase order Tab.
    Regards,
    Vinay

    Hi,
      I was faced this issue yesterday and finally find it caused by the check box ' Based-GR IV' in the PO.
    Twig Chan

  • GRN Report for 103 and 105 movement

    Hi all
    IS there any report available in SAP
    Like i have done GRN with movement type 103 and 105
    So i want to know for a specific plant against specific movement type let us say
    my po is of 100 quantity
    i have done GRN for 20 qty mov type 103 and 20 qty with mov type 105
    GRN of 40 qty mov type 103 and 4 qty with mov type as 105
    grn 20 qty with mov type 103
    grn 20 qty with mov type as 103
    so i want a report material doc created for mov type 105 w.r.t 103 mov type material doc
    and only 103 material doc whose 105 is not done
    plz give me ur valuable input
    regds
    shailesh

    ya that is possible to get but not thorug standard MB51
    look do this way create a query in SQVI
    select tables MSEG and MKPF , EKBE now from this table select the field movement type as selection critera and posting date , plant etc.
    now select the field  MSEG,Movement type, PO no.
    i will give you the logic system should select the material document for movement type 105 then against this material document you can get the po now(that is already there in mb51 just change the layout) now from the purchase odere no selected you can get the material document for movement type 103 from table EKBE that is purcahse order history  . check with abaper by using this logic

  • Separate MIGO Series for 103 and 105 Movement

    Hi Experts,
    Please confirm SPRO Setting to separate MIGO Number Series for 103 and 105 Movement Type.
    Please cofirm, whether it is possible.
    Matter Urgent.
    Ishu

    Hi,
    Material Document is at Client Level, you cannot separate based on the  movment type.
    Regards
    Rewrad Points if useful

  • Why 105 material document is without REF_DOC if i don't use GR-Based IV ?

    Hello Guru ,
    We are facing a issue which is the 105 movement type document generated by MB01 is without the 103 REF document number .
    As we know this is due to the 'GR-Based IV' option is not enabled in the Purchase order line item level ( Intercompany scenario , we need to receive the Invoice before we start the actual goods receipt ) , but is it possible to have the REF document information in 105 material document ?
    Because we need to know which 103 movement material document is linked to which 105 movement material document .
    Many thanks !
    Best Regards,
    Carlos

    Hi SRK ,
    The system reported an error when i add the reference field in "Enjoy field" :
    Field LFBNR is not allowed for transaction type 105
    Message no. CZ287
    Best Regards,
    Carlos

  • GR with Excise Capuring and Posting ( Movements 103 and 105 )

    Hi
    We have the requirement like .
    1. we have the Business requirement like GR 103 and 105 movements types .
    our requirement: while doing GR with Movement type 103 will capture the Excise . While releasing Blocked stock to unrestricted will post the excise . please advise me how to configure .
    thanks
    @sakhi

    Hi Sakhi,
    When you post 103 the system takes it as GR blocked stock,not a valuated stock in plant.
    But you can capture excise invoice at the time of 105 --i.e Release blocked stock and Post the same in J1IEX  transaction.
    With Regards,
    Vijaykumar Panchagattimath

  • MIGO with respect to 103 and 105 movement

    Hi,
    Is it possible to have same migo no. in 103 and 105 movement type migo. If yes, what are the spro setting requried.
    Ishu

    dear,
    it is not possible to have two movement types having the same GR no
    again when it comes to 103 and 105 movement
    what is logic for that
    do u accept that 105 u can do only after 103 ?
    what it means ?
    u have to do 103 first then 105
    if u want to do 103 and 105 at a time then what r doing  u are just doing 101 because end result is same.
    clear
    regards,
    snb

  • Mvt type 103 and 105

    Dear all,
    I am doing GRN through 103 mvt type of 100 Qty. But at the time of 105 Mvt type qty found 90 that means 10 Qty still pending in block stock. How to process with 10 Qty in block stock which is due to vendor mistake. Please suggest exact procedure and accounting effect on the same.
    Regards
    Atul

    While posting the document against the movement type 103, no FI documents get generated becasue there is no valuation for the materials at the blocked storage Location. The FI document is generated with the movement type 101 and 105.
    In this case, you can cancel the material document number created by the movement type 103 by 104. Then again you will have to do the GRN in 103. The quantities in the material document number created by 103 movement type can't be modified.
    Secondly, if you have the final GRN against the 103 document, then you will have to return the stock by movement type 122.
    Still any queries, revert back.

  • 103 and 105 movement type

    hi all
    I have done 103 movement type with 100 quantity...
    but i want to do GR 105 movement type  with 110 Quantity....
    System is giving Error M7022 which is maintained as a warning only.........
    SAP MM

    Hi
    103     Goods receipt for purchase order into GR blocked stock
    105     Release GR blocked stock for warehouse
    Check stock availability in GR block stock if same is 110 then only u can pass trnx. with 110 qty and 105 movement .if stock is less than 110 system will give stock deflict error which is currently ur getting
    Check first GR block stock for that material and try to remove only that much stock
    Vishal...

  • Links to Training and Certification Material

    Hi Every One ,
       Here is the link for all the training and certification material .
    http://mysapbi.blogspot.com/2006/12/sap-crm-tutorials.html
    Chrs
    Rama

    Publication of copyrighted material is illegal and may result in legal actions being taken against you, do not participate in the publication, distribution or sharing of such materials.
    Craig Cmehil
    SDN Community and Collaboration Manager

  • Link SD Invocie And FI-Ca Document

    Hi Experts,
    How can i find out on which General ledger an artical from SD invoice is booked?
    I know that i can find it with the transaction VF03
    But when i want to know that for some 200 SD invocie I want to make an querry for it.
    Thanks in advanced for the help
    Regards
    R.L.Groener

    RL:
    If you look at the xblnr value in DFKKKO, you should find the SD billing document number.  then from the FICA document you can check DFKKOP and DFKKOPK for the ledger account info.
    regards,
    bill.

  • Opening internet linked encrypted files and printing pdf documents

    I can't open an encrypted file that requires an link to a remote server, the system says the computer does not have an internet connection, but it does. I also can't print a page from a non-encrypted pdf file which I can open and display.  The printer doesn't respond, yet it works with everything else.  I've uninstalled and reinstalled Adobe Reader 11.0.10 twice and also installed it again and replaced with Adobe READER 10.1.4.  Neither of these changes make any difference. I've also disconnected the fire wall but to no avail.  I now have the following Adobe programmes installed :-  Adobe X 10.1.4, AIR, Flash Player 10 plugin, Flash Player 16 ActiveX.  Can anybody help?  Do I also need to install Adobe Acrobat and if so is there a free version?

    Maybe that method does not use Adobe Reader, but your operating system's print function?

  • Table containing link between material document and serial number.

    Hello.
    In connection with a goods receipt for purchase order in transaction MIGO a material that is serial number controlled is being recevied. The transaction allows the user to seach and use a serial number. The user then posts the goods receipt for the purchase order and a material document is created (entry in table MSEG).
    With this entry in MSEG as a starting point, I have to find the serial number that the user selected when posting the goods receipt. I have been looking in thse tables EKPO, RESB, RSDBS, AFPO, EBAN, RKPF, MSEG and MKPF, but none of them has the serial number used. Would anyone be of assistance.
    Thank you very much.

    Hi,
    2 options:
    1. Use tables: MSEG, SER03, OBJK.
    Links:
    - MSEG & SER03 to read the object number
    MSEG-MBLNR = SER03-MBLNR + MSEG-MJAHR = SER03-MJAHR + MSEG-ZEILE = SER03-ZEILE
    - SER03 & OBJK to read the serial number
    Read OBKNR from SER03 with the above link & pass the same to OBJK table here you can get the serial number (OBJK-SERNR)
    2. Use FM - GET_SERNOS_OF_DOCUMENT
    Regards,
    Vivek

  • Table for PO order and material document link

    Hello,
    I want to extract PO order and respecitive material documents ( IR , GR docs.)
    Can you give table(s) names ?
    Thanks,
    Ishak

    Hi ,
    You can use 2LIS_02_ITM ,2LIS_02_SCL DataSource you also check the following DataSources
    2LIS_02_SCL Tables EKKO, EKBE, T001, T001W, EKET, EKPA.
    2LIS_02_HDR  Tables  EKKO, EKBE, T001, EKPA.
    2LIS_02_ITM Tables  EKKO, EKBE, T001, T001W, EKPO, TMCLVBW, T027C, ESSR, T147K, T147
    2LIS_02_SCN  Tables  EKET, EKES, EKPO.
    2LIS_02_CGR  Tables  EKBE, EKES, EKPO.
    2LIS_02_SGR  Tables EKET, EKBE, KKPO
    Thanks
    REddy

  • Link between Material Document and Notification Number

    Hi
    In table QMEL we find the material document that is generated in correspond to Inspection Lot not for Notification((Goods Movement - Material Document).
    Our problem is that we didn't find the material document(Goods Movement) generated after notification.
    As we have done the cusmomization for posting the scrap in the notification and the Material Document is generated for this posting.
    In QM03 we can view the Material Document generated.
    Pls help!!!

    Dear Kumar,
    Thanks for reply but ,
    In this table the material document is corresponding to Inspection Lot not for Notification Number.
    e.g
    InspLot 40000000067( Material Document - 5000000083)
    . QM Notif. 300000062
    .. Goods Movement 49000030282008
    .. Goods Movement 49000030302008
    In table VIQMEL if we enter QM notification No.300000062 we will find InspLot 40000000067 and  Material Document - 5000000083 but not,
    .. Goods Movement 49000030282008
    .. Goods Movement 49000030302008
    I need table where we can find these material documents w.r.t QM notification number.
    Regards
    Purnesh/Anil.

Maybe you are looking for