Link to a baffleing problem

Only posting link here, getting desperate for a solution, and that forum is not budgeing.
http://forum.java.sun.com/thread.jsp?forum=28&thread=480163&tstart=0&trange=15
Thanks

Thanks for the response,
It used to work fine, and then I think I upgraded the JMF and it all went to garbage.
My question is how can I repair this? Is the problem in the jre that my IDE uses, or is it in the jre my PC is set up to use. Or is the Format class that is in the classpath of my PC different than the one that is being used in my application?
Company is waiting patiently(NOT) for me to repair this problem.
Thanks
Jim

Similar Messages

The iPad does not ship unless he closed ITunes does not recognize or computer If he shipped fully closed device I bought a charger and bought Link and the same problem persists IPad without Jelbrak

The iPad does not ship unless he closed
ITunes does not recognize or computer
If he shipped fully closed device
I bought a charger and bought Link and the same problem persists
IPad without Jelbrak

What do you mean 'does not ship unless he closed' ? What are you trying to do with your iPad, and what happens when you do it ?
If your computer's iTunes isn't recognising the iPad then do you have the latest version of iTunes installed on your computer ?
device not showing in iTunes on a PC : http://support.apple.com/kb/TS1538
on a Mac : http://support.apple.com/kb/TS1591

Does anyone have a link to common bugs/problems encountered with flex 3?

Hi,
does anyone have a link to common bugs/problems encountered
with flex 3, just so i can try and familarise myself before I go
asking etc? thanks folks!!

flex warnings:
http://livedocs.macromedia.com/flex/2/langref/compilerWarnings.html
flex errors
http://livedocs.macromedia.com/flex/2/langref/compilerErrors.html

Has CS6 fixed the PPro with AE dynamic links slow to render problems?

I've got PPro with AE dynamic links slow to render problems similar to those discussed in this thread:
http://forums.adobe.com/thread/904652?start=0&tstart=0
As I understand it (and I could well be wrong), if I render a PPro project that has AE projects dynamically linked in (anything from simple lower thirds to color grading), during rendering the AE bits run as a service, which limits the AE bits to a single CPU and effectively stops simultaneous rendering of multiple frames. This is why I can get very high render times (essentially no parallel processing), and why messing with the number of CPUs allowed for simultaneous frame rendering, or the amount of RAM said CPUs can access, has little to no effect on total render time.
Supposedly as some point AE was going to be changed such that it used Media Encoder to do it's rendering (same as PPro does), thus speeding up rendering for any PPro project that has AE parts dynamically linked in.
Has this been done in CS6? If not, any idea when that's scheduled to happen?

Jim Simon wrote:
(I do wish Adobe staff would keep this distinction mind when creating their videos. When I saw one about the new background rendering in PP, I was interested, only to learn that he was actually talking about background exporting, a feature PP has had since AME was introduced in CS4.)
The distinction is not so distinct, and this is an industry issue, not really Adobe. After Effects has a render queue, which is used for exporting, but you can also export. Lightwave has this, even Avid. The terms do have their own distinct meanings, but of course context is usually required. So usually "rendering previews" or "rendering final output" serve as context-sensitive uses of the term.
Terminology abuse is widespread, even people with video cameras now call themselves "filmmakers" and people who produce films never shown nor intended for a cinema call themselves "cinematographers." ENG video producers are called "photogs" and news photographers are called "photojournalists."
Transcoding, encoding, rendering, exporting....mish-mashed unfortunately, but thankfully most people can figure out what's meant.
Back to the OP - After Effects can be used with Adobe Media Encoder, it's just not the default. You can import any composition into AME from AE and render your encoded export.
As for background rendering....I remember when Pinnacle Liquid was the first to the table with that feature back in 2004 or 2005. It seemed awesome, except that you needed a ton of spare hard drive space and lots of processing to keep the background rendering going...effecitvely your processor was in use 100% of the time. When you weren't scrubbing or playing back, Liquid was rendering previews. Of course, you could use those previews during export but you rarely would have wanted to do so, since it was better quality to reference the original data when compositing the layers and effects to output to a web file, for instance. Then you had to keep cleaning up the preview cache.
I rarely render previews at all, and when I do it's just a small segment at a time, just to get a full look at the final composite. Mercury Playback is usually more than capable of playing back most of my edits the rest of the time.

D-Link Dir-615 internet problems

Hi All, I am not posting this for help. I came across a problem and could not find any help on the net that would solve it. So this is to help anyone whom might have similar problems.
First, let me give you the scenario. I have SBC DSL as my ISP and the 2Wire modem/router took a dump. I looked for a modem/router combo that was 802.11 (N) compliant. There are a few but the prices were a little above what I wanted to pay. So I ended up buying a DSL modem and a D-Link DIR-615. I set the modem to "Bridge Mode" and followed the set up instructions from D-Link. After the setup some web pages were stalling and timing out. I noticed this on HTTPS pages mostly but also pages on the Apple site too. I then went to Safari and used the "Activity Window" to show me why.
Well the cure for this, which I have not been able to find anywhere on the net, was to "Disable" QoS on the DIR-615. After that...greased lightning speeds.
Hope this helps anyone that might be suffering with the same problems.
Cheers,
Glynn

This is because your Mac is connecting to your router but is failing to obtain an IP address via DHCP.
Is your Mac still set up to obtain an address automatically via DHCP?
If so, try the following sequence:
1) Disconnect from your D-Link
2) Power off the cable modem and router.
3) Power on the cable modem and wait until its status lights indiciate it is connected to its network.
4) Power on the D-Link and wait until its status lights state it is connected.
5) Try to reconnect to the D-Link on your Mac.

Baffling Problem with Acrobat Javascript

I'm hoping someone can help me. I've tried for hours and hours to find what the trouble is but just can't find a solution.
The following code works, however, this is the baffling part. I need to edit / update the code but the problem occurs when I make ANY changes to the code - even indenting a line. You will notice that the code is not indented and poorly formatted - that's because when I had the code indented, I repeatedly got a "SyntaxError: missing } in compound statement"
I am completely baffled as to why sometimes I get the SyntaxError and sometimes not. I swear there are instances where the code worked one time and then another time causes a SyntaxError.
Tried using Adobe Javascript Debugger, tried running code through jslint.com, tried creating a new PDF file and placing this code in that file - still getting SyntaxError if I change or indent the code. The only thing I haven't tried yet is trying it out on the Windows version.
I'm using Acrobat Pro 10.1.3 (Creative cloud) on a Mac OS X Lion 10.7.4
Any help would be really appreciated!
var trackErrors = 0;
var errorMessage = 'Please complete all of the required fields';
if (this.getField('1A').value.length === 0) { errorMessage += ' A Wall Height '; trackErrors++; }
if (this.getField('1B').value.length === 0) { if (trackErrors === 1) { errorMessage += ', B Wall Length '; } else { errorMessage += ' B: Wall Length '; trackErrors++; } }
if (this.getField('1C').value.length === 0) { if (trackErrors === 1) { errorMessage += ', C Spacing '; } else { errorMessage += ' C: Spacing '; trackErrors++; } }
if (this.getField('1-4-radio').value === 'Off') { if (trackErrors === 1) { errorMessage += ' and Material Type - Fabric or Laminate.'; } else { errorMessage += ' Mat type'; trackErrors++; } }
if (trackErrors === 0) {
var x, y, v, z, kits = '';
var flag = 0;
this.getField('1D').value = this.getField('1B').value / 2;
this.getField('1E').value = this.getField('1D').value / this.getField('1C').value;
this.getField('1F').value = Math.floor(this.getField('1E').value);
this.getField('1G').value = this.getField('1F').value + (this.getField('1F').value - 1);
this.getField('1H').value = this.getField('1A').value * this.getField('1G').value;
var materialType = this.getField('1-4-radio').value;
switch (materialType)
case 'F':
x = this.getField('1H').value / 32;
y = Math.ceil(x);
this.getField('bw-kits-required').value = y + " Kit Required";
break;
case 'L':
x = this.getField('1H').value / 128;
y = this.getField('1H').value / 32;
if (flag === 0) {
if (x === Math.round(x)) { kits += x + ' kit '; flag++; }
if (y === Math.round(y)) { kits += y + ' kit '; flag++; }
v = Math.floor(x);
x -= v;
if (v > 0) { if (x < 0.75) { kits += v + ' kit'; v = Math.ceil((x * 128) / 32); kits += ' and ' + v + ' kit'; } else if (x >= 0.75) { kits += (v + 1) + ' kit '; } } else { kits += Math.ceil(y) + ' kit'; }
this.getField('bw-kits-required').value = kits;
break;
} else { app.alert(errorMessage); }

I don't get the same thing in Acrobat 9 on Windows XP. It would be interesting to see what happens if you copy what you posted here on the forum and use it.
I would suggest changing code like:
if (this.getField('1A').value.length === 0)
To something like this:
if (this.getField('1A').valueAsString.length === 0)
If you use the value property and the field value is numeric (or "true" or "false"), it won't have a length property because the type of the value isn't "string", so it will be undefined. Since the special value of undefined is not equal to zero the code works, but it's a bit misleading. It could be further refined to just:
if (!getField('1A').valueAsString)

Link to Url properties problem

Hello all,
i am working on link to url UI element.
the url that i have is larger than that i can put in reference property of link to url UI Element.
How may i put whole of the url in reference properties of link to url UI Element without length problem.
Thanks & Regards.
Vikash

workaround:
create an action and open the link via WINDOW API or with an exit plug
http://help.sap.com/saphelp_nw04s/helpdata/en/45/1bc575ba064574e10000000a114a6b/content.htm
regards
stefan

Fonts in linked images cause printing problems

This is not a question as I have already solved this issue, I just wanted to save someone else the time.
Problem: Print job stops half way through document
Error Code: 49.4C02
Printer: HP line (3 different models)
Program used: InDesign CS6 from Creative Cloud
I had printed this job before and never had an issue. Then one day after many textual edits, the PDF stopped printing and would send the printers into a Fatal error which caused them to reboot. I had no idea what had happened or why. All I could remember changing was text. It was printing on some printers, but none of the printers on my floor. At first I thought the file was corrupt, so I resaved it. And resaved it, and resaved it. I saved it out with every type of export setting. I even replaced vector illustrations with crummy jpeg images. Still, not working. My boss is kind of an important guy for the government, so when he started to get upset, we all started to scramble for a solution.
Research suggested that we update the firmware which did not work.
I was suspicious of potential problem fonts, though it confused me as they had printed before. I opened the PDF and went to Properties > Fonts and saw a Type 1 font. Not familiar with this, I Googled it and after reading a bajillion websites, still could not find the answer in removing it.
Now at this point, I had removed all of that font family (Type > Find Font > Replace), exported, opened PDF, still there! WTF, really? InDesign could no longer find this font.
Here's what happened.
Well, because in the new CS6, Preflight is no longer something that you have to manually go to, it works automatically similar to dynamic spell checking. My document did not have any errors, but I knew it HAS to have some sort of error. I went to the Preflight window (Window > Output > Preflight), clicked on the menu tab and went to "Define Profiles...". Well, well, well. Because the 'Default' setting put in place by Adobe does not actively have "Font Types Not Allowed" selected, it was not catching the Type 1 font that was causing a day of wasted IT resources and my sanity.
I made a new Profile, checked "Font Types Not Allowed", checked ALL of the "Type 1" options, saved and let it scan. What's this?! 1 error!? Hmmmm... it was coming from a linked .eps file! I opened the file, I must have forgotten to outline the font during all of the changes. And I'm assuming that because the font was linked via an element, that when InDesign went to export all of the fonts, it did not have access or did not know what to do with the font that was in my .eps file, so what it did was turned it INTO a Type 1 font (or as I learned, a PostScript font) and embedded it along with all of my other fonts into the PDF. Which is why when I was trying to find this font earlier, it couldn't be found because it wasn't IN the document, it was LINKED to the document. This font on its own prints fine, but it gets converted to a PostScript font when it is within a linked element within InDesign.
My whole office did a dance of victory once we fixed the problem. Ridiculous. So I hope now, if someone ends up having the same problem I did, now they know where to look to find the problem! It would have saved everyone here some time if the default "basic" preflight wasn't so "basic".

whitworth916 schrieb:
First off, I was only offering my experience for others who were having similar problems as I did.
3. Thank you for your opinion. But here's an example of when you should, when you pass the document around and others will open it WITHOUT access to any special fonts you used. Yes, you outline then to keep the font. Yes it's uneditable.
I find your response rather offensive. As if I am a complete fool and am unfamiliar with everything you've mentioned.
It is not only my opinion, when someone has not the used font, please export the file to PDF and send the PDF with embedded fonts. That is the way how missing fonts on the recipients computer are handled. In your case it is a logo, ok, as I mentioned before, in a logo I would outline the font too.
With outlining a font, e.g. in InDesign you loose not only the editibility but also automatic numbers and bullets, frame color & stroke with all effects applied on them, paragraph rulers, underline, strike through and many issues more, also missing metrics can cause a different setting (space between letters) after a font is outlined. And it is also impossible to outline automatic placeholder from the master without releasing them, but releasing them can cause a different order of items and will result in different text wrapping and a changed layout. If you want these things happen, do it.
Maybe that I am offensive, but I never considered you as a fool.

Linked cdr files causing problems in InDesign

I have a Pagemaker file I am trying to open in InDesign. The PageMaker file has linked Corel Draw (cdr) files in the document. When I open the PageMaker file in InDesign, I am having problems with linked cdr files. The graphics come out blurry and I am unable to re-link them from InDesign. The linked cdr files are crisp and clean in PageMaker. If I try Windows\Links and then click on any cdr graphic, the options to relink, go to link, update link or edit orignal are all disabled. There are 2 machines with InDesign on them with the same specs and it happens on both of them.
Here are the machine specs on software: Windows XP SP2, Adobe PageMaker 7.0, InDesign CS3 Ver 5.0, Corel Draw 8 Ver 8.232

So my question is how to re-link these files? Can it be done with InDesign? Is there a compatability problem with InDesign and Corel Draw files? I would prefer not to have to start from scratch with the document.

Safari 5.0.3, open link in new tab problem

I have a Mac 10.6.5.
When I open safari it works fine, then if I right click on a link I see the options open in a new tab, or window (and many other options), when I click open link in a new tab it works, then in the new tab I have a problem: If I right click on a link I can't see anymore the option "open in a new tab", all I can see is, open link, open link in a new window, download linked file and copy link, if I click on open link in a new window it opens a blank tab :s.
Also right click options are always limited in a new tab and, if I right click on a picture in the new tab I can't see the same options that are normally listed when I fist open a window.
How can I fix it, is someone else having this problem?
.

Hi and welcome......
Try troubleshooting the Safari .plist file.
Quit Safari if it's open (Command + Q)
Open a Finder window. Select your Home Folder in the Sidebar on the left. It has a small house icon. Then open the Library folder then the Preferences folder.
Move the com.apple.Safari.plist file from the Preferences folder to the Desktop.
Relaunch Safari. Now launch Safari. If Tabs work as they should, move that .plist file to the Trash.
Carolyn

Problem: The procedure entry point sqlite3_wd_checkpoint could not be located in the dynamic link library SQLite3.dll, Problem: The procedure entry point sqlite3_wd_checkpoint could not be located in the dynamic link library SQLite3.dll

Problem: Every time the laptop is turned on, this message pops up:
The procedure entry point sqlite3_wd_checkpoint could not be located in the dynamic link library SQLite3.dll
Could someone please tell me if they have had the same problem and how they fixed it? Thanking you in advance.

Sorry to inform you, that this is the iPod Classic Community forum, perhaps it would be best if you post your issue with the Microsoft Windows forum, or whatever software that is giving you this problem, but if it is iTunes try
https://discussions.apple.com/community/itunes/itunes_for_windows
Havea nice day!

Link error not finding Problem.obj

I have a project that uses Meaurement Studio in VC++. Everything was fine until I used MStudio wizard to add support for common objects. Project refused to compile and link because the compiler could not find some .h and .Lib files. I included the path for .h files to the preprocessor options of VC under project/settings and the path for the *.Lib files to Linker option of project setting. Linker now complains that it cannot find C:\problem.obj This file does not exist on the C: drive. has anybody seen this problem before?
Thanks,

Yep, it returns nothing. Debug output seems to be largely irrelevant except this oddity:
-- Debug: Received Message:
-------------------------- BEGIN NETLINK MESSAGE ---------------------------
[NETLINK HEADER] 16 octets
.nlmsg_len = 36
.type = 2 <ERROR>
.flags = 0 <>
.seq = 1421583995
.port = 1853883468
[ERRORMSG] 20 octets
.error = 0 "Success"
[ORIGINAL MESSAGE] 16 octets
.nlmsg_len = 16
.type = 16 <0x10>
.flags = 5 <REQUEST,ACK>
.seq = 1421583995
.port = 1853883468
--------------------------- END NETLINK MESSAGE ---------------------------
Message type = "error" with a message = "success"? Not sure if this is normal or not

"/usr/lib is not a symbolic link" and testify+libjpeg7 problem

everytime I update pacman or do a "ldconfig" I get this:
/sbin/ldconfig: /usr/lib/ is not a symbolic link
this appeared by the time i installed libjpeg7 from aur (though I'm not 100% sure libjpeg7 is responsible). I've looked through google trying to find out what it means and if it is a problem, but nada! but, while at libjpeg, even though I installed libjpeg7 I can't compile testify (spotify linux-client). I get this error:
In file included from image.c:31:
jmemsrc.h:26: error: conflicting types for 'jpeg_mem_src'
/usr/include/jpeglib.h:959: note: previous declaration of 'jpeg_mem_src' was here
make: *** [image.o] Error 1
make: *** Waiting for unfinished jobs....
when i make /usr/include/jpeglib.h link to /usr/include/libjpeg7/jpeglib.h the compile and install is successful, BUT, testify crashes telling me:
Wrong JPEG library version: library is 80, caller expects 70
if more info's required, I'll provide andif I'm raising a problem already raised (I know there's been a lot of hassle since the upgrade), I'll gladly follow a link to solution.
edit: the "not a symbolic link" appeared after installing libspotify0.0.3. installed it on another computer, and same thing appeared. though, would still like to know why it appears...
Last edited by serein (2010-03-27 17:09:58)

Mr.Elendig wrote:Whatever you are trying to build has to be patched for libjpeg8
to much to do to get libjpeg7 working the way i want it to?
i've looked through the source, but i don't know enough to get it working... crap.
and its xtestify i'm trying to build: http://xtestify.sourceforge.net/

Linking to HTTP / Spry problem / Outline problem

Three questions:
1. I have DIV Tags with JPEGs in them and am trying to link them to existing pages (Facebook and the like.) Every time I get the cursor in the DIV Tag and click HTML in the Properties panel, I try to type the link into the "Link" flyout menu. However, when I click again ANYWHERE (mostly not even on the design page, but right outside the flyout menu) everything I just typed disappears. Am I missing something?
2. I designed for a vertical spry navigation bar. I wanted spacing between the buttons, so I put a 13px margin as a property in ul.MenuBarVertical a. After this, the space between my buttons has turned white, but only in a browser (not even in live view.) Is there a color property I need to add and manipulate to make it not have any color, but just show what's behind the whole spry menu?
3. This is probably my most crucial problem. Every single DIV tag that I put on my page (including my spry menu) has this annoying white boxy outline around it!!! It makes my webpage look insanely unprofessional. I do not want any outline, but for the background to just show behind any items I put on the page. This does not happen, however, with any DIV Tags that only have text in them, just my spry and any other tags that have backgrounds or JPEGs. HELP!!!
-Kaschak

You need to choose the image.
It has no effect on my menubar at all
If I were you I would patent the effect, I cannot replicate it
I all earnest, please post a link to your site so that we can help you in an appropriate manner.
Gramps

Baffling problems with letter key and erratic keybinds

I'm not even certain how to explain my issue. I was in the middle of typing an explanation to a friend in IM when I discovered that any attempt to press 'v' key resulted in a copy/paste of the URL I had attempted to send to him before. I checked to see if either of the keys included in the copy/paste keybind were somehow stuck, but the command key initially appeared to be operating normally; it was only that particular letter key that posed a problem. After restoring the default keyboard settings, turning off all of options in the 'speech' toolbar, and updating my software, I found that my computer would now paste text if I pressed either my v OR the command key on the left of the space bar. I could also occasionally type a normal letter if I held down my left click. I'm a bit baffled. Is this a sign of a dying keyboard, or..?

Is this in Leopard or on the iBook G4 Mac OS X (10.4.2) = Tiger computer?
Does it do this if running in Safe Mode (hold down shift key while starting, be very patient)?

Link to a baffleing problem

Similar Messages

Maybe you are looking for