Link to newwe version of pl/sql developer

I would like to upgrade to a more current version of pl/sql developer I have 5.1.0 730 and would like to get 6.0.6 906.
Can anyone point me to a download link to do this?
thanks!

You can find it here: http://www.allroundautomations.nl/plsqldev.html

Similar Messages

How to know the ORACLE version from PL/SQL developer

Guys,
I wanted to know the version of ORACLE that i am using currently. How should i get it ? is there any functions available ?
Note: I am using PL/SQL Developer tool.

select * from v$version

Generate DDL works in old version of SQL Developer, but not in new versions

Hello all,
How to generate DDL in new versions of Oracle SQL Developer for production Oracle database?
For production database, the generate DDL feature works fine in old versions (version 1.5.5) of Oracle SQL Developer, SQuirrel, Toad and many other similar tools, but not the new versions of Oracle SQL Developer (such as 2.1.1.64.45).
The SQL tab for a table is blank for me in production databases. Of course, it works fine in development Oracle database.
I did some research that many articles describe SELECT_CATALOG_ROLE as the required read-only role in production database. Our DBA did a test to grant me this role temporarily, and it worked for me to generate DDL using new Oracle SQL Developer. It is pain for me to ask for this role.
Is there a plug-in or work-around, so the new versions of Oracle SQL Developer can have this generate DDL feature in production without the mentioned SELECT_CATALOG_ROLE?
I could not find the answer in older forum threads.
For now, I will have to install older versions of Oracle SQL Developer.
Thanks

I've seen a couple posts about people not being able to generate DDL for other users. To date, I've never seen a anybody post a workaround, nor have I seen one of the developers post a response, nor have I seen anybody say they've submitted a SR.
I think I remember reading somewhere that the new version of SQL Developer uses dbms_metadata.get_ddl to generate DDLS, rather than some custom query built on top of catalog views...which could explain why it use to work, but no longer does. But whether or not this is true, I don't know.
You could try submitting a SR and see if Oracle responds saying that it's a known bug and will be fixed in the next release. Until then, unless you get the role, you're stuck using something else for DDL generation.

Oracle sql developer version

Hi,
My first question is
where do i find the version of oracle sql developer?
My second question is
when i check one of the OSUSER name column is null.how it occurs? and how do i give corresponding name to its column?
Kindly help .
thanx in advance

Hi,
Thankx for your help for my 1st question,it has answered.
My sql developer version is 2.1.0.63
Coming to my2nd question.
I have used the following command to check the corresponding user.
select sys_context('USERENV','OS_USER') from dual
It show null value for osuser column.
I use RHEL 4 operating system
None other than this user,all the user has osuser value.
So here i want assign value for the corresponding user?
Your help will be more appreciated

Demonstrating PL/SQL Functions Using SQL Developer

Good afternoon,
I'm starting to write some PL/SQL functions to replace some of the SQL that I use most frequently. A couple of very simple examples would be:
create or replace function func_test (p_1 number) return number
is
x number;
y number;
begin
x :=1;
y :=2;
return p_1 * x * y;
end func_test;
create or replace function func_test2 (p_1 varchar2) return varchar2
is
return_val varchar2(10);
begin
select p_1 into return_val from dual;
return return_val;
end func_test2;
However, at my workplace I haven't been granted create function privileges yet until I can demonstrate some examples, which is understandable.
For the time being, without these privileges, is there a way I can build/test functions in principle locally using SQL Developer without the need to write the functions to our database? I.e. can I demonstrate the above in SQL Developer, but without wrapping in create or replace syntax?
I hope this isn't too vague.
Using Oracle 11gR2 (not logged in to workplace database at the moment for specific version no.)
SQL Developer 3.4
Thanks,
TP

sb92075 02-Nov-2013 19:12 (in response to TinyPenguin)
populating test DB with data is a solvable problem.
You don't need client data to test code (functions).
You only need sample test data; which generally is less than a few dozen records per table.
Absolutely, of course. Our client database is pretty messy though, and includes data prior to the implementation of more recent business rules that I need to take account of. Useful perspective though, thanks.
rp0428 02-Nov-2013 19:14 (in response to TinyPenguin)
Sure, but then I wouldn't have access to all the data in our client database to test functions under various circumstances.
Huh? Why not? It's your database so what keeps you from creating a database link to your client database where all the data is?
Also, I suppose it's not good practice to constantly write/replace/drop functions to/from a database when developing them? Better to test the function in principle and then write to the database?
Huh? Why not? What you think a dev database is for if not for development?
Based on your two posts so far in this thread it's understandable why they don't want to give you privileges yet. Those sample 'functions' you posted are NOT a good use for functions.
In sql developer you can just create and save the queries you use most often. There is no need to create functions for that.
But if you do need an anonymous function now and then just create one using sql*plus syntax:
Our IT department are pretty sensitive about how they allow access, even to the dev environment. As you've identified, I'm not naturally a programmer so the option to play around with the data to develop some representative examples about how we can simplify and devolve SQL reporting to more members of staff is useful to me. I just wrote those two function quickly for the purpose of posting some sample data, which I thought would be helpful. Thanks for illustrating how to return their output using an anonymous block.
FrankKulash 02-Nov-2013 19:13 (in response to TinyPenguin)
Hi,
The obvious solution is to get the privileges. If your employer really wants you to do something, they need to give you the necessary privileges to do it. It's silly for them to tell you to do something, but refuse to let you do it.
Failing that, you can install Oracle on your own machine, as suggested above. It's free and legitimate if you're only using it for learning and developing. Oracle Express Edition is very easy to install.
As a last resort, you can write functions and procedures that are local to an anonymous block, like this:
Thanks Frank. Yeah I'm going to speak with our DBA next week about privileges. I've got XE/SQL Developer installed on my own computer - I wrote those sample functions using them - I just wasn't sure how to call/return anonymous blocks as both you and rp identified to develop at work as an interim solution.
Thanks a lot All,
TP.

404 error when downloading Oracle SQL Developer 2.1 (2.1.0.63.73) for Mac

Greetings,
I'm getting a 404 error when I try to download the Mac OS X version of Oracle SQL Developer. The download page is at
http://www.oracle.com/technology/software/products/sql/index.html
And it links to the Mac version at:
http://download.oracle.com/otn/java/sqldeveloper/sqldeveloper-2.1.0.63.73-macosx.tar.gz
Which doesn't exist.
Is this the correct forum to report this problem?
Thanks
Mick

I don't know what to say: I went to this link
http://www.oracle.com/technology/products/database/sql_developer/index.html
Clicked on Download in the upper right corner, re-accepted the whatever-they-wanted-me-to-accept and then the OSX download suddenly worked. Give it a spin and see if a circuit like that works for you.
Good luck!

Oracle SQL Developer 1.0 is easy to install and use, and is portable

I have tried the latest version of Oracle SQL Developer 1.0 and would like to share my experience of using it.
Installation of Oracle SQL Developer 1.0
Download from
http://www.oracle.com/technology/software/products/sql/index.html?_template
Unzip the Oracle SQL Developer for Windows (55.8 MB) to C:\sqldeveloper (103MB)
Advantages: The unzip folder can be your removable disk and you can access Oracle
anywhere provided that there is an Internet connection to Oracle Server.
Unzip sqldeveloper-1557.zip to C:\ with folder name;
double-click on sqldeveloper.exe in c:\sqldeveloper
Click on [No]
Tick all check boxes
Click on [OK]
Right-click on Connections, New
Database Connection…
Enter User name: SCOTT
Password: TIGER
Hostname: 127.0.0.1 (or IP of your Oracle Server on the Internet)
SID: orcl
If you want to connect to local Oracle user SYS,
Enter User name: sys
Password: ora10g_manager_password
Hostname: 127.0.0.1
SID: orcl
Select Role: SYSDBA
Click on [Connect]
Right-click on Tables, Create Table
Click on [Add Column]
Select Type: NUMBER for COLUMN2
Click on [OK]
Table1 is created
Click on TABLE1, click on “Data” tab
Click on the “Green Plus” icon to insert record
Click on “Commit Changes” icon
Click on “DBConnection1” tab
Enter: select * from table1;
Click on “Execute Statement (F9)” icon
To exit: Click on File, Exit

Have you noticed that there's a forum dedicated to SQL Developer?
C.

Oracle SQL Developer 1.1.1.25.14, I rror ORA-01722 Invalid Number

I have installed the new version of Oracle SQL Developer 1.1.1.25.14, I use Oracle 9.2. When I browse in the tree of the stored procedures and compile I obtain Error ORA-01722 Invalid Number. The previous version does not give this error. I have tried to change the decimal separator to comma ',' and point '.' but this error always appears.

create or replace
PROCEDURE getAge (
dtmDataStart_in IN DATE,
dtmDataEnd_in IN DATE,
intYears_out OUT NUMBER,
intMonths_out OUT NUMBER,
intDays_out OUT NUMBER) AS
-- Calcola il numero di anni, mesi, giorni intercorsi
-- dalla data iniziale alla data finale.
-- Se la data iniziale è > della data finale, le due date
-- vengono scambiate e le variabili di output vengono ritornate
-- con segno negativo.
--==================================================
-- Data Ultima Modifica: 31/07/98
-- Aggiunta procedura per il calcolo della differenza tra
-- due date dello stesso anno.
--==================================================
-- DICHIARAZIONE VARIABILI INIZIO --------------------------------------------------------
intYMDStart NUMBER(10);
intYMDEnd NUMBER(10);
intYMD NUMBER(10);
intDiffAnni NUMBER(5);
intDiffMesi NUMBER(5);
intDiffGiorni NUMBER(5);
intMeseStart NUMBER(5);
intAnnoStart NUMBER(5);
intTotGiorniMeseStart NUMBER(5);
ysnNegativo NUMBER(5);
-- DICHIARAZIONE VARIABILI FINE ----------------------------------------------------------
BEGIN
intYMDStart := TO_NUMBER( TO_CHAR(dtmDataStart_in,'YYYYMMDD'));
intYMDEnd := TO_NUMBER( TO_CHAR(dtmDataEnd_in,'YYYYMMDD'));
ysnNegativo := 0;
IF intYMDStart = intYMDEnd THEN
intYears_out := 0;
intMonths_out := 0;
intDays_out := 0 ;
ELSE
IF intYMDStart > intYMDEnd THEN
intYMD := intYMDStart;
intYMDStart := intYMDEnd;
intYMDEnd := intYMD;
ysnNegativo := -1;
END IF;
intDiffAnni := TO_NUMBER(TO_CHAR(dtmDataEnd_in,'YYYY')) - TO_NUMBER(TO_CHAR(dtmDataStart_in ,'YYYY'));
intDiffMesi := TO_NUMBER(TO_CHAR(dtmDataEnd_in,'MM')) - TO_NUMBER(TO_CHAR(dtmDataStart_in ,'MM'));
intDiffGiorni := TO_NUMBER(TO_CHAR(dtmDataEnd_in,'DD')) - TO_NUMBER(TO_CHAR(dtmDataStart_in ,'DD'));
-- I valori cosi' calcolati di intDiffAnni, intDiffMesi e intDiffGiorni vanno bene
-- ad eccezione dei seguenti casi:
-- Sistemo intDiffAnni
IF (intDiffMesi > 0 OR (intDiffMesi = 0 AND intDiffGiorni >= 0)) THEN
-- intDiffAnni e' OK
intDiffAnni := intDiffAnni;
ELSE
-- non e' ancora arrivato il giorno del compleanno
intDiffAnni := intDiffAnni-1;
END IF;
-- Sistemo intDiffMesi
IF (intDiffMesi > 0 AND intDiffGiorni < 0) THEN
intDiffMesi := intDiffMesi-1;
ELSIF (intDiffMesi < 0 ) THEN
     if(intDiffGiorni<0) THEN
     intDiffMesi := intDiffMesi+11;
else
     intDiffMesi := intDiffMesi+12;
END IF;
ELSIF (intDiffMesi=0 AND intDiffGiorni<0) THEN
     intDiffMesi:=11;
END IF;
-- Sistemo intDiffGiorni
-- Calcolo i giorni come (TotGiorniMeseIniziale - GiornoIniziale) + (GiornoFinale - 0)
-- che e' uguale a fare TotGiorniMeseIniziale + (GiornoFinale-GiornoIniziale)
IF intDiffGiorni < 0 THEN
intMeseStart := TO_NUMBER(TO_CHAR(dtmDataStart_in ,'MM'));
IF intMeseStart IN (1,3,5,7,8,10,12) THEN
intTotGiorniMeseStart := 31;
ELSIF intMeseStart = 2 THEN
-- Da enciclopedia: sono bisestili gli anni multipli di 4
-- esclusi i secoli che non sono multipli di 400 (Parte commentata).
intAnnoStart := TO_NUMBER(TO_CHAR(dtmDataStart_in ,'YYYY'));
if (intAnnoStart MOD 4) = 0
-- AND NOT ((intAnnoStart MOD 100) = 0 AND (intAnnoStart MOD 400) <> 0)
Then
intTotGiorniMeseStart := 29;
else
intTotGiorniMeseStart := 28;
end if;
ELSIF intMeseStart IN (4,6,9,11) THEN
intTotGiorniMeseStart := 30;
END IF;
intDiffGiorni := intDiffGiorni + intTotGiorniMeseStart;
END IF;
IF ysnNegativo = 0 THEN
intDays_out := intDiffGiorni;
intMonths_out := intDiffMesi;
intYears_out := intDiffAnni;
ELSE
intDays_out := intDiffGiorni * (-1);
intMonths_out := intDiffMesi * (-1);
intYears_out := intDiffAnni * (-1);
END IF;
END IF;
EXCEPTION
WHEN OTHERS THEN
RAISE;
END getAge;
The output result of compilation is "GETAGE Compiled", I think the 01722 error is not caused from an sql syntax error, but probably caused from an invalid or unsupported or 'strange' configuration on nationalization... the fact surprises me that the previous version did not give problems
THANKS SO MUTCH
*/

Problem Dropping Objects in Oracle XE using PL/SQL Developer

Hi all,
I am using PL/SQL Developer to access Oracle XE. I created some tables and later dropped them. But I still see some objects in the PL/SQL Developer Browser under the Tables section.
Below is the name of the objects in I see:
bin$fj7zj7y9rhqujmwrz1zmtg==$0,
bin$frxjknkot4cwtkexm4wtca==$0,
bin$q2m8wls+s72szfufb+mnzw==$0,
bin$syrcyj1bsqcelpfsodudrw==$0,
bin$tjt8ipk6ras8qtx0zvn+6w==$0,
bin$vc6dzazorg6zwemticqdha==$0,
bin$xfrxhcb3s5ev8wkjfc/3vg==$0,
bin$oyrdsi+us+yhhoprzdingq==$0,
bin$vtk7saqqtecbhmdwpnp1bg==$0,
bin$x1hhdhy+trmfponyldjwdw==$0
When I tried dropping these objects, I get ORA - 00933: SQL Command not properly ended. Error deleting bin$fj7zj7y9rhqujmwrz1zmtg==$0
How do I resolve this problem? And then drop all those objects listed above.
Is it possible to drop those objects at all?
Thanks in advance.
Sam.

There is no problem sofar. The objects you see are dropped objects ( if you drop it, oracle silently rename the object but preserve it as long you have sufficient space ).
You shouldn't drop them if you don't have issue with free space - they enable you to get back accidentally dropped table without to have restore the backup ( flashback table). If you are annoyed by displaying it in PL SQL Developer, you can just add a filter to not show them to you ( all objects like 'bin%' ) or you can update to newrer version of PL SQL Developer ( i've 7.0.0.1050 and it is displayed properly, all dropped objects can be found under recyclebin folder ). Finally , if you want purge them, use the 'purge recyclebin' command.
Best regards
Maxim

Oracle SQL Developer Data Modeler start up error

Hi All,
I just downloaded Oracle SQL Developer Data Modeler (2.0.0.57.0) [Released 1 July 2009] by selecting the option "Oracle SQL Developer Data Modeler for Windows (This zip file includes the JRE)"
After I installed the same and tried to run it by clicking datamodeler.exe, I get the following error message
"unable to create an instance of the Java virtual machine located at path:..\jdk\jre\bin\client\jvm.dll"
On the same machine I can successfuly run the Oracle SQL Develper with no errors. My machine is having Windows XP Professional SP3.
Any ideas? If there was a problem with Java, than the Oracle SQL Developer should also not run. But as stated it runs with out any error but the Oracle SQL Developer Data Modeler gives the above error.
Regards,
JAA149

1 - The above problem has nothing to do with the memmory. I tried on a 400 MB RAM, 900 MB RAM, 1.5 MB RAM & 2 MB RAM with the same arror.
"unable to create an instance of the Java virtual machine located at path:..\jdk\jre\bin\client\jvm.dll"
http://i30.tinypic.com/9vkwf6.jpg
2 - There are two "datamodeler.exe: files
One is at D:\datamodeler\datamodeler.exe
2nd is at D:\datamodeler\bin\datamodeler.exe
The same error occurs with both the files.
3 - The Oracle SQL Developer Data Modeler version is "Oracle SQL Developer Data Modeler (2.0.0.57.0) [Released 1 July 2009]" and the file I downloaded is "Oracle SQL Developer Data Modeler for Windows (This zip file includes the JRE) - (57M)"
If I look in "D:\datamodeler\jdk\jre\README.txt" I find
"Java(TM) Platform, Standard Edition Runtime Environment Version 6"
If I run "D:\datamodeler\jdk\jre\bin\javacpl.exe" I get
http://i30.tinypic.com/mt8ocn.jpg
If I run "D:\datamodeler\jdk\jre\bin\jureg.exe" I get
http://i28.tinypic.com/30boiyo.jpg
If i check at the control panle add/remove program
http://i30.tinypic.com/1428tba.jpg
If I go to "http://www.java.com/en/download/manual.jsp" and download "jre-6u16-windows-i586-s.exe" and run it.
If I go to "C:\Program Files\Java\jre6" I find the same files as in "D:\datamodeler\jdk\jre"
I am able to run Oracle SQL Developer with out any kind of error let alone the above one. But with Oracle SQL Developer Data Modeler I get the above mentioned error no matter what I try.
As the error states "unable to create an instance of the Java virtual machine located at path:..\jdk\jre\bin\client\jvm.dll". The file "jvm.dll" is located at two places. One at "D:\datamodeler\jdk\jre\bin\client\jvm.dll" and the second at "D:\datamodeler\jdk\jre\bin\server\jvm.dll"
A similiar problem occurs with JDeveloper with the fllowing solution
http://forums.oracle.com/forums/thread.jspa?threadID=506339&start=0&tstart=0
Which states the following
"hello!
in the problem with JDeveloper i have a solution. The jdk have a file jvm.dll in the path: jdk/jre/bin/client/jvm.dll this is the problem ... now in the path:jdk/jre/bin/client/ojvm has a file with the same name if you copy and paste this file to the another path, now its works fine your Jdeveloper.
Jdeveloper use two files to jvm.dll to work one in the folder /client and other in /server copy the same file to the two locations for precaution
for me work fine thanks..."
I tried to do the same (Copy from client folder to server folder)
D:\datamodeler\jdk\jre\bin\client\jvm.dll
COPIED THIS FILE TO
D:\datamodeler\jdk\jre\bin\server\jvm.dll
Nada. So I reversed it (copied from server folder to client folder)
D:\datamodeler\jdk\jre\bin\server\jvm.dll
COPIED THIS FILE TO
D:\datamodeler\jdk\jre\bin\client\jvm.dll
Does not work. So I tried another solution stated at the same forum entry
"Well,
i solved the problem by this way :
<SQLDEVELOPER>/jdev/bin/ide.conf
In this file, change this line :
AddVMOption -Xmx512M
by
AddVMOption -Xmx256M
Now, the executable is lauching correctly. No more errors with Java Virtual Machine.
But is it a good thing to solve it like that ?"
But the ide.conf file is only at "D:\sqldeveloper\ide\bin\ide.conf" which is for the SQL Developer and not the SQl Developer Data Modeler
Correct me if I am wrong but
JRE = Java Run Time Envoirment
JDK = Java Development Kit
And Oracle SQL Developer Data Modeler needs JRE and not JDK. In any case I download JDK
jdk-6u14-javafx-1_2-windows-i586.exe (121,306 KB) and installed it but no succcess.
I tried every thing except completely re-install my whole PC.
Any help will be much appreciated.
Cordially,
Jawad

SQL-Developer 1.5.4 - SQL-Worksheet does not use Table-Owner

In old versions of the sql-Developer you can drop a Table in the Worksheet and a select Query was built. With the new version 1.5.4 the table-owner is missng and you must fill in the table-owner or the query does not work with tables of other users.
Is that a bug or are there the posibility of change settings to drop tables in the SQL-worksheet with table-owners.

The drag and drop functionality was updated so that when you use drag and drop the schema is not prefixed for the current user you are connected to. However it is appended if you drag a table form another connection. It appears to have been overlooked for Other Users. We will address this in a future release. In the meantime,a workaround is to create a connection to the other users and then the drag and drop will append the connection name.
Sue

SQL Developer: Windows 7 64-bits double numerical entries

I am using sql developer windows 7 64-bits version 64-3.2.20.09.87-no-jre.
I am entering data directly on tables.
Sometimes when I use numeric pad to enter numbers, double entries appears on the first digit.
For example: entering 1234
it appears 11234 - with first numeric entry appearing twice.
This also happens with the past versions, different notebook brands.
How do I solve this problem?

997844 wrote:
Hi can anyone advise
The Problem
We are currently using Oracle SQL Developer 1.2.1.3213 to administer to the oracle database, unfortunately, this version does not play well with a 64 bit environ. The current airbus standard for Oracle SQL Developer which is happy with Windows 7 64 bit is version 3.1.07, again unfortunately, this version does not support versions of the Oracle database less than I think it is 8. Budget precludes the option of upgrading to a newer version of dbase.
The Question
Is there a version of Oracle SQL Developer that will meet our needs for windows 7 while remaining on the same version of the oracle database, or are there other competing products that you could recommend that will fit the bill. The product will require a GUI I don’t want to go back to entering SQL at the command line.
regards
Kevin" this version does not support versions of the Oracle database less than I think it is 8."
What do you mean by this statement?
SQL Developer is just a client. Clients do NOT have to be exactly version matched to a database. I am running SQLDeveloper 3.2 on a Win 7 Pro 64-bit desktop and my databases are a mix of 10.2.0.4 and 11.2

Database copy of a SDO_GEOMETRY column fails in SQL Developer 3.2.20.09

I'm trying to copy a table that has a SDO_GEOMETRY column and it just fails:
Moving Data for object LOCATION
Unable to perform batch insert.
LOCATION ORA-00932: inconsistent datatypes: expected MDSYS.SDO_GEOMETRY got CHAR
What's the workaround for this or SQL Developer doesn't support this?
Edited by: user10768987 on Apr 11, 2013 11:05 AM

Welcome to the forum!
Whenever you post provide your full version number for Sql Developer and, if a database is involved the name and full version of the DB.
>
I'm trying to copy a table that has a SDO_GEOMETRY column and it just fails:
Moving Data for object LOCATION
Unable to perform batch insert.
LOCATION ORA-00932: inconsistent datatypes: expected MDSYS.SDO_GEOMETRY got CHAR
What's the workaround for this or SQL Developer doesn't support this?
>
Since you haven't posted your version and provided the exact steps you are using we have no idea what you are doing to try to copy a table.

SQL Developer 3.0.03 Code Editor Save Actions missing from menu

I had just gotten a new notebook and installed latest version of Oracle SQL Developer 3.0.03. Seems Auto Save settings are enabled by default. I am prompted each time I switch off from SQL Dev to another app or window to Save the SQL code I am testing. I don't want to necessarily save it each time so I have to save or cancel each time I switch windows. I checked the documentation Help menu and it directed me to the Code Editor section > Save Actions menu to adjust settings. This category does not exist (or is not visible for me) to check settings and make changes. I am Admin on machine and installer of the app so not sure if it is some security setting I am not aware of. Or is this the wrong Help documentation for this version?
This version is much different from older version I was using. Any thougts on this before I remove and re-install an older version?
Thanks,
Joe

many thanks for your reply jim. i see the settings for 'prompt for save file on close'. this is checked by default and that is fine. if i have a sql worksheet open, as soon as i switch to another window (i.e. visual studio app), i get prompted to save the file. that is the strange behavior i've been seeing with this version.
i will try to update to 3.0.04 and see if that resolves. i appreciate your help.

SQL Developer 3.1.07 does not show a Tables entry under the Navigator

Installed SQL Developer 3.1.07. Under my Connections window, I log into the SYSTEM account. There is NO tables entry. SYSTEM has access to all tables in the database. It's the same behavior for other database users as well.
I re-installed SQL Developer 3.0.04 and a Tables entry DOES appear for the same SYSTEM user connected to the same database.

Hi J,
I was under the impression that regardless of the Java version that my environment variables are setup to use,
the installation of SQL Developer (when you install with a JDK), that the JDK version installed with SQL Developer
is the one that is used.Exactly correct, unless you decide to override it in the conf file. I needed to be certain you did not.
Anyway, trying to resolve the problem, let's go back to a possibility that something went wrong with the migration of your preference settings. Here is an old thread discussing a missing Tables node in the Connection view (sometimes called the navigator tree):
Table node missing from navigator tree in 3.0.04
The poster had to rename the system directory containing these settings, then ignore the offer to migrate settings upon starting up SQL Developer again. If you never migrated settings in the first place, then I'm not sure what more to say -- probably would require additional research here in the forum. But if you did migrate settings, then try the following:
1. Export your connections (Connections node | right-click | Export Connections...)
2. Exit SQL Developer
3. Rename the directory to something else
4. Restart SQL Developer
5. Import your connections
That directory on my Windows 7 machine for the current production release is something like:
C:\Users\<username>\AppData\Roaming\SQL Developer\system3.1.07.42
Hope this helps,
Gary

Link to newwe version of pl/sql developer

Similar Messages

Maybe you are looking for