Link to previous page

I have pages 1,2,3 and when an error comes in page # 1 it goes to "Error PAge" (pg#200) and displays the error there on pge#200
and in the same way for pages 2 and 3 , on error page there is a return button and when clicked should go to that page
where it has come from page#1 ,
Can I know how to go about this and when I added the &APP_PAGE_ID. in the "page in this applicaiton"
it just refreshes the error page when the return button is clicked but does not go to the previous page #1
I need to implement this asap .... your help is needed
would appreciate your prompt response
Thanks

I have done something similar for a Help Page.
Essentially, I created an application item called app_calling_page.
When somebody clicks the help icon, I set a request called &APP_PAGE_ID.
I set the application item APP_CALLING_PAGE
with the current page &APP_PAGE_ID.
Then on my help page, I have a back button, my target is a page in the application which redirects me back to
&APP_PAGE_ID.

Similar Messages

How to i get rid of the redirect notice it shows up on my safari whenever i try to go to a different page it says "the previous page is sending you to: LINK if you do not want to visit this page, you can return to the previous page"

How to i get rid of the redirect notice it shows up on my safari whenever i try to go to a different page
it says "the previous page is sending you to: LINK
if you do not want to visit this page, you can return to the previous page"

Yeah, this seems to be something to do with Google, not your iPhone. A search on that error found this page:
http://www.google.com/support/forum/p/Web%20Search/thread?tid=56a3c4b71b3dc1d9&h l=en
which shows people using lots of browsers on different platforms suffering from it. No definitive solutions though.

Is it possible to use two buttons on a master page to link to consecutive pages i.e. previous or next

The easiest way to explain what I am attempting to achieve is to create a navigation template on the master page, with two identical arrows, one pinned to the left side, and one to the right, along with a basic 3 button navigation for; home - table of contents - end for example.
The idea behind the arrows is that if on my "Plan" tab in Muse, I have all pages within the site in consecutive order from left to right and everytime I change the image that represents the previous or next, I have to go through every page, delete the source image, add the source image to every page (50+ pages) and then link each page individually to the next page in the order.
Any help would be greatly appreciated.
Jeff

I produce a 300-page magazine twice a year that uses next/previous links. Unfortunately master items can't be edited on individual pages. My solution is to edit the HTML after the export. Too bad overrides don't work as they do in InDesign.
In Muse you could create the arrows on an editable page, then copy/paste-in-place on the rest of the pages and edit the links on each page. Isolate them on a separate locked layer above the regular page content so they don't get moved accidentally.
Julie

New page unexpectedly loses ability to go BACK to previous page after clicking on a link in page (not consistent), why?

Firefox 4.0 Vista 32 bit
I will have a tab open, and click on a link, new page loads. The Back and Forward buttons do not work. Usually it shows in history (unless I opened too many pages before clicking on link). This has happened several times.
It is not consistent - one time I used search bar and opened a Yahoo search page - clicked on search link and when I wanted to go back to look at another search link from the previous page- page would not load (BACK button dead). I clinked search again, clicked on another link and that time it allowed me to return to the previous page???
I am about ready to go back to previous version.
Thank you.

It's a good idea to try disabling Flash completely and see whether the problem continues. If it does, then my guess is incorrect. To test that, open this tab:
orange Firefox button (or Tools menu) > Add-ons > Plugins category
Here you can locate Shockwave Flash and use the Disable button. Keep this tab open for easy access when doing your test.
''If your test confirms that Flash is causing the problem,'' then the other thread has two suggested workarounds. The first is simple to understand (keep some Flash running at all times) but may be inconvenient to do all the time. The second is trickier because it requires editing a file in (or creating and then dragging a file into) a system folder. Fortunately you only need to do it once.

After hitting link in nbc news, there is no return to same spot on previous page.

After hitting link in nbc news, there is no return to same spot on previous page.

I had a similiar problem.. perhaps my solution will give you an idea. My problem is I was returning a list of records.. when the user clicked more down I added the next 50 records.. but I didn't want them to have to scroll down themselves.. So the tag that generates the records inserted a specific id on the row I wanted to start with and then I used the following javascript to scroll down (all of this was in a nested scrollable div tag) This solution works in both FF and IE.
var divObj = document.getElementById('AnchorDiv');
var anchorObj = document.getElementById('ScrollHere');
if(anchorObj!=null&&divObj!=null){
divObj.scrollTop = anchorObj.offsetTop;
} So for you you could put an ID on the container that contains the tabs.. then when the page loads have javascript fire that scrolls the page down to that element... You will of course have to make sure you have some value on the form or in the session that you can use to tell you it is infact a tab change, so that it doesn't scroll down there all the time.
That may not help, but it might get you thinking in the right directions..

Is it possible to have an asset link to the previous page?

Hello!
Okay so I my website have over 200 pages and I wanted to make a single button that functions as a web browsers back button.
Is this possible or am I going to have to put an asset on each individual page telling it to go back to the specific page that it was just on?

Hi,
There is html code for back to the previous page.
Google it to be sure to get the one that works for you.

How can I create links to other pages in iBooks that will function in PDF?

Hi,
I know some people have asked previously how to create links to other pages of their book within iBooks. I having an issue with this myself that I haven't been able to resolve. I am able to create the links, and they seem to function within the program, however, once I export the document as a PDF file (the format in which I need to have this ebook!), the links seem to be non-functional. Does anybody have a fix for this?
Thank you so much for any suggestions you may have!! I really need to figure this out for my client.
Regards,
Meggyn

Exporting as a PDF does alter/lose/remove certain functions. Adobe Acrobat has its own page navigation system.
A lot of the hidden engine of iBooks Author is basically very similar to building a website! so links and books marks are an "internal" function.
IF you have Acrobat and not just the Adobe Reader, you can make links. I have never needed to try, but I see a working link related index in the many software manuals I have.

Return to same record on previous page after using form

Hi,
I have an application that contains a table with tasks and subtasks (which are linked to a task), and for every task, there is a 'add subtask' link, which links to a form where I can create new subtasks for that task.
My problem is that when I have created a new subtask, and return to the previous page (with the overview of tasks and their subtasks) automatically by clicking the 'create'-button, that the report starts again at line 1. I would like it to go back to the same task for which I just added a subtask.
In my search for the answer, I came across these two discussions on this forum:
Re: navigate to previous record
after edit, return to the table where the record is at the same position
I tried to implement the solution they came up with in those discussions, but it didn't work for me.
The reason of this might be:
- It are old discussions, maybe some things have changed
- I use a standard report with custom template, they do not
- My link is on a field that has the same value for all records, being just a text item 'Add subtask', in the other discussions they made the link on an actual DB-field, in my case this would be for example task_id.
When I try to implement the solution on the second forum exactly (well, not exactly, I did of course adapt this to my situation), there is one step which doesn't work for me. It's the very last step:
"With these values: #LINK_&P2_EMPNO."
When I put the # in there, the button deletes all the information about the link when I click 'Apply changes'. When I don't use the # (just LINK_&P2_EMPNO.) he doesn't delete the information, but the link to the same record doesn't work.
This is how I implemented it:
Source page (overview of tasks and subtasks):
Link attributes: LINK_#TASK_ID#
Target: Page in this application Page: 4 (form)
Item 1: Name: P4_TASK_ID, Value: #TASK_ID#
Item 2 (not important for returning to the source page): Name: P4_YEAR, Value: #YEAR#
Item 3 (not important for returning to the source page): Name: P4_TEAM, Value: #TEAM#
Target (form):
Action when button clicked: Redirect to page in this application
Page: 3 (source page)
With these values: LINK_&P4_TASK_ID.
It doesn't return to the correct record, but the task_id is included in the link as follows (when I tried to create a new subtask for task 02.01.08 and returned to the source page) f?p=37080:3:5503066190863::NO:::LINK_02.01.08 which is almost the same as they say in the discussion: f?p=&APP_ID.:1:&SESSION.::&DEBUG.:2::#LINK_&P2_EMPNO. (missing the '#'-sign and 1 less ':' before the link-item though).
Why isn't it working for me? How can I solve the problem?
Could I get some help with this please? It would be a very useful functionality in my application as there are a lot of records.
Thank you.
Kind regards,
NDG

I'm new on Jdev, I'm Pl/sql developer learning Jdev ....
I need to do this on the Task Flow Right? can you give me some stesp to follow?
thank you

IWEB previous does not return to previous page

I am trying to get back to the last page with the Previous option in the Link setup. I do not know why it does not return to the previous page but some other pages.

The following script is courtesy of Cyclosaurus. Use it in an HTML snippet:
<button type='button' target='_parent' onclick='javascript:history.back();' > Previous Page </button>
OT

Can a menu link to .html pages?

I want to make a DVD that will start with a video introduction, and upon finishing the brief minute or so intro, it will display a menu screen.
1.) I would like the menu buttons to link to .html pages saved on the DVD. So after clicking on a link from the menu, it will open up a full-screen .html page.
2.) Each .html page will link to other .html pages and have embedded images, and short quitcktime video clip links that will open up in small windows when links are clicked.
3.) I need to have a link on each .html page that links back to the main dvd menu.
Can this be done? Any issues with doing something like this?
Thanks in advance for any advice!!!!

Mark - you need to read up on DVD@ccess if you intend doing this through DVDSP. Yes, it is all possible, but you haven't quite got the way it works correct.
What happens is you embed a URL into a menu. When the menu is accessed (typically by a button from a previous menu) the link is activated and the resource is launched. This opens in a window in front of the DVD playback window. The DVD player continues to run in the background - so you need to allow for that when returning. The viewer will simply close the web browser window and be back at the DVD window - by then you should have made the @ccess menu 'time-out' and return to the previous menu.
You set up the HTML file (or whatever file you are using) in a folder on your Mac, and place it all within a parent folder. From within DVDSP you then use the property Inspector for the disc itself (click not he disc icon in the outline view) to specify a ROM folder. You browse for the parent folder you just created. Everything inside that will get added to the root level of the DVD, which is why you place your HTML inside a folder within that parent folder (unless of course, you don't mind your HTML file/s being scattered all over the root of the DVD).
You set the URL for the @ccess link by using the following path format:
file:///DVDname/ParentFolderName/filename.extension
So if your html file is called 'index' and it is in a folder called 'ROM' on your DVD called 'Project' then the URL you set in the menu would be:
file:///Project/ROM/index.html
This should then get activated (as long as you have enabled DVD@ccess links in your DVD Player software).
However, there are some caveats.
Whilst this will work quite well on a Mac, a PC user will have a wildly varied experience - for some the links will work. For some the links won't work, and for some, all links will launch the moment the first link is encountered... ALL PC users will need to install the DVD@ccess software (which will be on the built DVD by default (DVDSP includes it there for you), unless they have already done so previously (unlikely).
In order to maximise the experience for PC users and Mac users you should consider using Sonic's 'eDVD' to add the hyperlinks. This makes use of the Interactual player which has a far higher installed base in PCs, but will need installing in Macs. Again, this gets included on the disc when you use eDVD.
eDVD is a PC only app - you'll need to build your project and transfer the VIDEO_TS folder to a PC, add the links and then burn it to disc or use software such as Gear Pro to create a DLT. Hopefully Jim (WTS) will see this and give more advice on how to use eDVD.
Getting DVD@ccess working on a PC is a tricky thing to do - a lot depends on the PC software spec, and since you can't govern the user's choice in this, you are walking a tightrope of compatibility.
Of course, you could simply set some text into your menu to say that there is additional content on the disc, and let the user browse to it at their leisure instead of relying on embedded links...

CF Set form.variable for query and Next/Previous pages error

I have a CF form with a select that posts to a CF "action" page.
On the action page I: CFSET ItemNumber=#form.ItemNumber#
I CFOUTPUT the 'ItemNumber' into the CFQUERY (which is an Inner Join dependant on the '#ItemNumber#')...
All of the above works just fine and displays the database fields in color alternating rows, per the rest of the code.
Here's the problem:
I'm displaying 40 rows on a page per "Next and Previous" code. (CFPARAM name="start" default="1" and CFPARAM name="disp" default="40" along with the rest of the NextN code in the header and body). This does display 40 rows on the page and puts a link at the bottom of the page "Next 40 Rows", etc.
Note: I'm only querying the database once and using the query (query name="data") to populate the table rows And the NextN code (CFOUTPUT name="data") And (CFIF start + disp GREATER THAN data.RecordCount, etc)...
The problem happens when you click the "Next 40 Rows" link to display the 2nd page of rows. Since (I'm assuming) this NextN code is 're-reading' the same page from top to bottom, an error is thrown when the code tries to read the CFSET ItemNumber=#form.ItemNumber# at the top of the page.
With the #form.ItemNumber# on this action page Originally coming from the previous posting of the form to this action page, when the "Next 40 Rows" link is clicked and the NextN code re-reads this action page - the CFSET ItemNumber (#form.ItemNumber) is not getting populated and throws the error...
I hope I've not made this sound confusing.
I can get the NextN code to work when I'm just querying the database without "flying in" a form variable. But when I CFSET a variable (#form.ItemNumber#) that is inserted into the query, the second page of the NextN throws an error and doesn't display.
I would include the page code here but it would be fairly lengthy and, as well, the NextN code is a 'standard' CF code -- I've narrowed the problem down to the above "Element is undefined" (when the page tries to reload from the "Next 40 Rows" link) and am hoping there's a simple fix or another way to display the records in Next and Previous pages.
Thanks to anyone in advance for shedding light on this.
- e

Thank you for the reply, Owain.
Yes - The Next/Previous at the bottom of the page are hyperlinks.
<a href="ThisPage.cfm?start=#Evaluate("start + disp")#">
The following is at the top of the page (and is the variable from the form that I CFOUTPUT in the query):
<cfparam name="ItemNumberDropdown01" default="">
<cfset ItemNumber = #form.ItemNumberDropdown01#>
The error report showed that the "Next Page" hyperlink was reading an undefined variable... although when the "action page" first opens from the form posting to it, it populates the CFSET just fine (per the cfparam and cfset above)... As you mention, the hyperlink clearing the form scope is what causes the error in trying to display the next set of records...
The form page and the 'action page' are both secure pages with an application page setting the session, etc. Am I at risk in using an URL scope?
Where would this URL scope be put? (The href is shown above - would the URL scope go in this? - How would this be written?)
The CFPARAM and CFSET would still exist at the top of the 'action page' and still throw an error wouldn't it or would this be replaced with something else to read the form.variable for this 'first' action page to be displayed?
Thanks again for the 'education' on this...
- ed

Browser Issue all links in web pages do not work

Having some issue with Browser: all links in web pages for various sites do not work. Browser was working fine for year or so just sopped the other day

Are your links including "www" at the beginning? Is your default browser correct? If you have a backup just use that backup when your browser worked, to put it in its previous state, but first backup what you have so that you can upload your history ie if you still need it
Twitter: @IAmBenGiey | Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Try my apps:
The Ultimate Currency Converter and T2G - BloGFeed

What happened to "Mail Link to This Page" in Safari 6.0 in Mountain Lion?

I just loaded Mountain Lion onto my MacBook Pro. When I went to use Safari (6.0), I noticed that I can no longer find "Mail Link to This Page" under File. How do i mail a link now?

Thanks for that, as I hadn't noticed the dropdown in the composition window. However, it also requires you to change the format of the message to Rich Text in order for the page to transmit properly. I'm a journalist, and I use plain text for all my messages (newspapers prefer this), so now I have to select File>Share>Email This Page, then choose Send Web Content As Web Page, then change Message Format to Rich Text, before I get the result I need.
In the previous OS I just chose "Send Contents of Web Page" or whatever the instruction was, and it was done.
I'm beginning to understand the true difference between the phrases "unnecessarily complicated" and "simply elegant".
I appreciate your help, nevertheless.

How to remember previous page in a JSP page that's reloaded

I have a JSP page where i want a "back" link that brings me back to the previous page. The problem is, some actions on this page will call a servlet that reloads my page, so using history.back() brings me back to the previous version of the same page.
What is a good way to solve this in a servlet/JSP application?

I just wrote a simple bean with a few methods that i frequently use.
the bean is session scope, and you just call something like
setCurrentPagePath(), and you build your link up by calling getCurrentPagePath()
before settings the new one.

Why does when I open new tab on certain website, the link on the address bar doesn't match the page I'm on and shows the link of the page I'm on before?

When I open a new tab...the link on the new tab shows the link of the page I'm previously on. Some of the other page had that effect too. But some website doesn't seem to be affected(ex: Twitter)

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Link to previous page

Similar Messages

Maybe you are looking for