Linked content using RH project name for topic title instead of FM file/heading name

Anyone seen this before? (and, yes, for anyone who is interested, the epub of my book should be available once I get this solved)
-Matt
PS: the htm filename is fine, it's just the topic title that's odd.
Message was edited by: mattrsullivan

I'm pretty sure that was in reference to setting Topic Title markers...not something I want to do in a 700 page book!
More info: The book processes and validates a clean EPUB if I omit the index, and throws 300+ errors when I include the index.
Via Notepad++. the index shows <section name=(the project name)>, so I imagine it's taking offense at the eleventy-six files with the exact same topic identifier.
Anyone seen this before??
-Matt

Similar Messages

I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

I've used an external drive for time machine which has important files on it. After trying to back up my computer, it suddenly needed to be "repaired" by utilities. Now it's not being "seen" at all! How do I recover my important files off the drive?

If the external drive can be seen at all in Disk Utility, follow the instructions for repair here.

Project Center - How to Update / Correct the URL/Link stored in the Project Name field.

In the Project Center list, the link in the "Project Name" field for some projects take you the the project details page and some display the project schedule. How can I update/correct the links to display the project schedule?

Reason for this behavior is your enterprise project template which your project manager used for creating project.
We create Enterprise project template, associate PDP , Schedule, workflow according to our need then we use these Enterprise project template for project creation.
In your case some of the project manager must have used basic template( default template) for some project, Custom Enterprise template for some project and f you are using workflow then workflow template for some project, that is why you are able to see
PDP page first for some project and Schedule page for some project.
In order to change it you can change default PDP as schedule for Enterprise project template then open project save and publish them.
kirtesh

Table link of RFQ to Project name

Hi gurus!
I would like to ask help from you,.
To know what tables I can use to link RFQ (Request for Quotation) to Project name?
So far I have tables EKKO, EKET, and EBKN? I want to find out what project an RFQ belongs to.
Thank you!
-Mozart

Hi Mozart
The link will never be to PROJ - remember PROJ is not an account assignment (controlling) object. No cost can be posted to a project definition
The cost objects in PS are WBS and network activity (network header is rarely used)
So in the tables look for WBS or Network Activity
Once you get the object you can get the hierarchy and determine the project definition
Regards
Virendra

Use time capsule drive for mass storage instead of time machine

I'm considering buying a new Airport Extreme with the time capsule drive. I'd interested to know if I can use the built in drive as an additional HD verses using it for a back up drive with time machine? I'm aware I can plug in a USB external drive for network storage, but would like to use the built one for storage as well. Anyone know if this is possible?

I just got a 2TB time capsule a few days ago to use as a "poor man's file server" for my iTunes library. Bob makes valid points, and I am aware of the limitations, but I think it will meet my needs for awhile. I am in the process of ripping a large DVD collection and my iTunes library is over 350gb which was starting to feel crowded on my MBA's 512gb SSD.
I have plenty of external USB and thunderbolt drives, but I wanted wireless access to the libary anywhere in the house. With the AC wireless on my 2013 MBA, I wouldn't really classify the time capsule as "quite slow", I'm seeing about 30MB/s for FInder file copies. I have a 1TB USB2 WD Passport drive and the speed is very comparable - about 35MB/s. Sure, it's not as fast as my thunderbolt drive at 190MB/s or SSD at 700MB/s, but it seems to work well for my content (I don't use HD video in iTunes).
The only noticeable issue is that the TC disk spins down almost immediately if it isn't in use, so you get a lag of a few seconds if you pause a movie for a minute. And it takes longer to start iTunes of course. For me, these were acceptable trade-offs to allow my library to grow to 2TB without any directly connected external storage.
I wanted an AC router regardless and the TC gives me a wireless disk for $100 more. In the future I can always add a "real" media server and let the TC do backups. But for now I'm happy with the way it works.

I was using Adobe Send Now for the longest time to send files; there was never a charge for it. Now, does Adobe Send replace Adobe Send Now and is there a charge or fee for Adobe Send? I can't get it towork! Paul Madsen

Does Adobe Send replace Adobe Send Now and if so, is it only available on a subscription (fee) basis? Adobe Send Now was free; I was never charged for the service.

Dear Sir or Madam at Adobe:
Does "Adobe Send" replace "Adobe Send Now" and if so, is there a charge for it? I was never charged for using Adobe Send Now. I cannot get Adobe Send to work for me; I can upload the file from my computer but when I click the box to send a "personalized link" a message box drops down asking me to upgrade. When I say no thanks, the message disappears but the box click does nothing. Do I have to subscribe to Adobe Send and pay a monthly fee for it before I can use it? Please explain what change has been made and what is going on with this program/service. Thank you. Paul Madsen 763-781-9118 [email protected]

Correct PPro CS3 Project Settings for Neoscene/Cineform 1080 60i .avi files?

I am looking for clarification on the correct Premiere CS3 project settings for AVCHD 1080 60i NTSC files converted with Neo Scene with the "maintain source frame format" option.
Should the PPro project settings for "Field" be upper or lower field first?
On a Cineform discussion board I was told all interlaced HD footage is upper field first.
However, I have found that a PPro project setting of upper field first results in much more sluggish playback than lower field first.
So seems there is additional processing needed with the upper field first project setting and this suggests to me that lower field first is the proper setting.
Any thoughts from NeoScene/Cineform users out there?
Thanks!
The project settings I have been using are:
Editing Mode: Desktop
Timebase: 29.97
Frame size: 1920 x 1080
Pixel Aspect Ratio: Square Pixels (1.0)
Fields: Lower Field First
Audio: 48000

...is not so good - bad colours. In Microsoft DV Avi-DV Pal compression. D1/DV PAL Wide is pixelate. I have click the de-interlace so it is not because of that. I have no problem to use encore it the file i send is compressed in those settings i mention before. I have no problems in compressing the file with those settings at all, like i have when i want to transfor the video in avi uncompressed.
Oaaa...i am going crazy here. I have had so many problems with this and if i end up working this documentary and not beeing able to export it i go mad!...this if i do not go there before because of this problems...

Prompt For Document Title as well as file name

Is there script or setting which requires the entry of document title as well as file name upon the saving a document? I understand that I can open document properties prior to saving, but I would prefer to enter the save command and be prompted to enter a doucment's title as well it file name. Thanks.

You can use the Prefix field to include things like "Dr.", and this will appear on the label.
I do not see any automatic way to include Job Title, but if you don't have too many to print you can do a kluge by putting the job title in the first line of the addres, then return, then the real first line. This will print nicely. But is work putting it in.

Variables for Topic Titles

Hi all,
In Robohelp, the Fields and Variables function only contains some variables relating to Date, Time. With the topic headings, I want to add them automatically to each topic by inserting them as a variable in the master page, and then apply this master page to topics. So please let me know how can I do this in RoboHelp ?
Note: with Help&Manual, this 's so easy.
Thank you.

Note though that will not affect the Topic Title that will be displayed in search results etc.
The Topic Heading is what you see at the top of the page, not necessarily the Topic Title although you can set the heading to be the same as the title.
The Topic Title is what you see in Topic Properties and they can differ.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How do I use one external HD for two Macs to play music files?

I have an External HD linked to my iMac with all my music files. I want to use that same portable Ext HD to use with my MacBook.
Changing the location from MacBook/iTunes Preferences doesn't work, nor does File>Library>Organize Library. The music files don't show up in iTunes. I'm on iTunes 10.6.1.

On each computer:
Open iTunes. Select Preferences from the iTunes menu and click on the Advanced icon in the toolbar. At the top you will see a box showing the path to your iTunes library. Click on the Change button, navigate to the location for the library on your external drive, select it and click on the Open button. Note this permanently changes the library's location on that computer. That means you cannot access your music unless the external drive is connected.
If you don't want a permanent change, then press the OPTION key and hold it down while you launch iTunes. iTunes will then prompt you to select the library you wish to open for that session.

Using TEDS as storage for precision standards instead of transducers

My company makes and calibrates precision resistance, capacitance and inductance standards. These are not transducers, yet they posess calibration data that would benefit from 'internal storage'. Some data could event be represented as a polynomial or a table (capac vs. freq; resistance vs. temp)
Is there a standard like TEDS for 'source' components; or could TEDS be used to create a built-in datasheet? (Call it "SEEDS", Standards Equipped with Electronic Data Sheet ;-) .
Now is the right time to use %^<%Y-%m-%dT%H:%M:%S%3uZ>T
If you don't hate time zones, you're not a real programmer.
"You are what you don't automate"
Inplaceness is synonymous with insidiousness

Hello,
As of now, if there is such a standard, I am unaware of it. However, there may be a way to do something like this using TEDS. The IEEE 1451.4 (TEDS) standard does include an optional calibration section where different types of calibration data can be stored. So you may be able to utilize TEDS to store information about the resistors/capacitors/inductors. However, National Instruments software does not currently read in the calibration information and automatically process it.
Something else that could be considered is that along with the calibration section there is a user data section in TEDS format that allows the placement of ASCII data.
Also, with NI-DAQ 7.2, you have the ability to read in a bitstream from a TEDS sensor. So it is also possibl
e to develop your own format and read in the binary information and process it using LabVIEW. However, you would have to understand IEEE 1451.4, and how to write in the proper checksums, and then create your own TEDS sensor, but I do believe it is possible.
Interesting Idea! Keep them coming!
Justin T.
National Instruments

Using Project Name in Version Name on import?

I'm just testing Aperture and I'm confused about the options available for renaming raw files on import.
Currently testing a setup like this using:
(Folder)2008
..(Folder)January
....(Project)Job1
....(Project)Job2
When I import files from my CF card I would like to rename the files using a format like this: YYYYMMDDProjectNameUniqueIDfromCamera. So a raw file from my 5D named MG4380.CR2 would be renamed 20080215Job14380.CR2.
Unfortunately, when I go to the Version Name options when importing I don't see the option to place the "Project Name" variable in the filename. This seems strange to me, especially since it is available in the Subfolders options.
Any advice or do I need to drastically change my current filenaming system if I want to use Aperture?
Thanks very much,
Andrew

I know what you're saying Ian, and I appreciate your help, but Master File uses the whole filename and I just want to retain the unique number created by the camera. This is what most other applications I've used like Photo Mechanic, Image Ingestor and Downloader Pro do, so I kind of expect it now.
When I was talking about retyping data, I meant that when I create a Project Name I have to enter the info manually (including the job date if I want to use that), and then when I rename the files I'm importing I have to re-type the same info again because I can't use the project name in the file name. So in the Project Name I have to enter the date manually, but when renaming the files it can pull the date from the camera exif data. So that's one place you could end up with a mismatch from a typo. Any then when I'm entering the jobname manually more than once there is another place to make a typo.
This may sound overly anal and I can assure you that I'm not a complete, ham-fisted illiterate prone to typing mistakes, but I have certainly made mistakes in the past that caused files to be place somewhere I didn't expect them to be.
In my perfect world I would be able to click "import" and then create a new project using a custom job name, but a date that is pulled from the camera exif like this YYYYMMDD_JobName, and then the images would be imported into a folder of the same name and renamed as YYYYMMDDJobNameUniqueID.
So I would only have to type the job name once, I would never have to manually type the job date, and my projects would automatically be sorted chronologically.
It seems very simple and makes sense to me, but maybe I'm weird
Cheers,
Andrew

Underscore randomly replaces forward slash in topic file names and topic titles

The problem I'm seeing is similar to the discussion at http://forums.adobe.com/message/2564701 which dealt with random insertion of underscores in topic titles. That problem seemed restricted to underscores replacing spaces in Topic File names and was solved (for some people at least) by deselecting the setting "Tools > Options > General > Use underscores in filenames." Playing with that setting has not worked for me when it comes to unwanted replacement of forward slashes.
I'm running RoboHelp 9 and linking from FrameMaker 10. The unwanted underscores are seen in (1) the RH project and (2) the help output:
(1) In RH project in some topic titles like this:
I want to keep the forward slash. The upper topic title is wrong and the bottom one is correct.
(2) In AIR Help output: search results and in the tab that appears above the breadcrumbs in the main right pane.
I cant change the titles prior to generating output because, as Matt Sullivan wrote in the similar discussion, "...for topics created from linked FrameMaker 9 files, the Topic Title is not editable from the Topic Properties. If it was, at least I could change the offending titles prior to final generation of output. (though the titles would revert on the next update of the FrameMaker source content)."
I've double-checked the source FrameMaker documents and I can find no difference between Headings in which the forward slash is retained (desired) and those in which the forward slash is replaced by an underscore (unwanted). Has anyone else seen this?
Thanks,
Matt

Isn't the issue here that RH is creating filenames AND topic titles based on the FM title. Because of the slash it is saying that is an illegal character it changes the filename and the title in RH is based on that, hence both change.
I don't know if that can be changed but now you can test to see if that is what is happening.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

CJ20N: link doc. templates to project template

Hello experts,
We have a need for following scenario (standard ECC 6.0):
Project manager creates a new project in transaction CJ20N using template. This is standard, I know. However, there is a need that the project template should also include templates for documents (planning to utilise DMS or KM or equivalent?).
Documents are linked to different statuses or parts of the project progress and they might be tailored project by project, e.g. names of the respondents, but there are a lot of standard text. Level for assignment is WBS. Documents are templates --> they are modified according to needs of that given project or then the documents are; e.g. drawings --> not modifiable.
They are not willing to create DIR somewhere else and then assign it to project - at least not now. It is also the question of easily knowing what template is needed for what phase. There are legal issues also.
So, is there some sort of FM or Bapi needed to call CV01N "inside" CJ20N?
Since there is a huge amount of documents, the structure of the different documents/templates is also a tough question but this can be most likely be sorted out through KM - portal is also used as UI.
Help for this CV01N - CJ20N is problem is highly appreciated.
Best regards,
Pipsa

Hello Basav,
Thanks for reply but I cannot access the link. All I get is:
The page cannot be found
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.
Please try the following:
Make sure that the Web site address displayed in the address bar of your browser is spelled and formatted correctly.
If you reached this page by clicking a link, contact the Web site administrator to alert them that the link is incorrectly formatted.
Click the Back button to try another link.
HTTP Error 404 - File or directory not found.
Internet Information Services (IIS)
Technical Information (for support personnel)
Go to Microsoft Product Support Services and perform a title search for the words HTTP and 404.
Open IIS Help, which is accessible in IIS Manager (inetmgr), and search for topics titled Web Site Setup, Common Administrative Tasks, and About Custom Error Messages.
If I try an part of the link (execpt help.sap.com) I get "not authorized to Directory". Can you please send the link again.
Thanks,
Pia

Greek Fonts for TOC Book and Topic Titles

Good Morning.
I Create o project using RoboHelp for HTML.
I rename TOC book and topic titles using greek fonts.
If i generate the project using Webhelp as layout with
Section 508 Compliant Output everything is ok at runtime but if i
use Skin TOC book and topic titles display wrong fonts on runtime.
I'd like to know if there is solution for this problem.
Thanks for help.

Hi Scottie
What Colum proposed is the standard answer we have been giving for years and presently it's likely the best approach.
However, Adobe does listen to their customers. And I've seen this particular issue cropping up time and again through the years. So I'm going to suggest to you that you and everyone else wanting to see some changes here consider submitting a Wish Form to ask for a new capability. Ask Adobe to devise a way to allow the user to print in the manner you are seeking.
Click here to reach the Wish Form page
Cheers... Rick

Linked content using RH project name for topic title instead of FM file/heading name

Similar Messages

Maybe you are looking for