Linked Server Problem while SQL Data Transfer using Non-sys Admin Account

Hi Team,
I've an issue while transferring the data from ServerA to ServerB. I've made the ServerB as "Linked Server" to Server A. Pre requisite like:
1) SQL Account is been created on ServerB.
2) Timeout settings for remote connections is set to "No Timeout".
When I execute the below script using Query Window, It executes successfully:
Insert into ServerB.DBName.dbo.TableName1
Select * from dbo.TableName1
But when I execute the same step by creating a SQL Job, it fails with the below error message:
Message
Executed as user: DomainName\UserName. Named Pipes Provider: Could not open a connection to SQL Server [1450]. [SQLSTATE 42000] (Error 1450) OLE DB provider "SQLNCLI" for linked server "ServerB" returned message "Login
timeout expired". [SQLSTATE 01000] (Error 7412) OLE DB provider "SQLNCLI" for linked server "ServerB" returned message "An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005,
this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.". [SQLSTATE 01000] (Error 7412). The step failed.
Could you please help me in fixing the above error message and I can transfer the SQL Data between 2 Servers.
Thank You
Sridhar D Naik

Sridhar,
Is this still an issue?
Thanks!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Similar Messages

Need to run SQL jobs with Non Sys-Admin account

Hi Everyone,
We've recently asked to switch our SQL service account from an account having sysadmin permissions to a non sys-admin account. Could you please give us any inputs on this.
Thanks in advance. :)

It's a little difficult to understand what you are talking about. First you say:
We've recently asked to switch our SQL service account from an account having sysadmin permissions to a non sys-admin account. Could you please give us any inputs on this.
No, the service account for SQL Server should not be a Windows administrator. It should be a standard Windows account. When you enter this account in SQL Server Configuration Manager, SSCM will assign the required permissions. You should then also assign
the permissions "Lock pages in memory" and "Perform volume maintenance tasks".
But then you start to talk about proxies and whatnots, and this is where you lose me entirely. Could you clarify what you are talking about?
Erland Sommarskog, SQL Server MVP, [email protected]

Oracle Linked Server problem in SQL Server

I'm using the MS OLE DB Provider for Oracle in my SQL Server linking an Oracle 9i server to the SQL Server 2000 server. I get the following error when I try to execute a query thru the SQL Server Query Analyzer:
[OLE/DB Provider 'MSDAORA' IOpenRowset::OpenRowset returned 0x80004005: ]
I can however define an ODBC connection and use DTS to get to the Oracle database just fine from the SQL Server machine. I need the linked server query to work though since I'll need it for a new application.
Any help is very much appreciated.
Thanks.
Anja

I guess I'll answer my own question. I found that the setting SQL Query Analyzer was set to "Implicit Transactions" in the current connection properties. When I turned that off the query ran fine

Problem while creating data transfer process

Hi friends
I am using BI 7.0 version.
I m getting a problem while creating dtp
After activating DTP and selecting the execute button, I am getting the following error message:
Request cannot be processed in its current state
Messg no : RSBK209
can anyone help me on this problem
Thank

Hi Deepthi,
Also check the error message(long text) and paste it here...
check if you are either creating a "second" Delta DTP ( if an existing Delta DTP exists, then system will not allow you create a second DTP) and will throw an "overlapping" error
Hope this helps
Thanks
Kalyan

Problem while Sending data concurrently using Evsnd function.

Hi All,
i am trying to send data from input schudule using evsnd function.
As per a test scenerio.
User 1: one user( cantains all bas members) , opens the input schudule , waits for and hour and do planning for few basmemebers and then submit the data.
User 2:another user ( subset of all base members) ,opens input schudule ,do planning and submits the data.
Now when user 1 Sumits the data , it overwrites the value of user 2.
is there is any way by which we can restrict user 1 of sending those value only that he/she changed.
Edited by: Tapeshwar Singh Bagal on Mar 11, 2009 11:02 AM

First, I'd strongly encourage you to use EVDRE instead of EVSND, as it gives a lot better control over many aspects of the input schedule.
As to your point, EVDRE definitely will only send back to the server the cells which have changed. It's been a few releases since I used EVSND (and its behavior may have changed some in the meantime), but if I recall correctly, it also does some of this same checking.
Another option to consider is to make the input schedule smaller (fewer accounts or entities or products or whatever your dimensions), and split it into two pieces, one for each of the business processes that the 2 users are performing.
If the 2 users are maintaining the same intersection of data, and performing the same business process (acting as a team, for example) then BPC has limited ability to support "checking out for edit" or locking the data for one user, in a way that prevents another user from changing it. The "park n go" feature does this in a way, but it's something that the user needs to do intentionally. That doesn't sound like your User 1 scenario of waiting for an hour before submitting -- probably when they opened it up, they thought it would only take 2 minutes, but then the phone rang, and then an email.... and then finally they finish it an hour or 8 later.

Problem while writing data on xls file using jxl API

Hi,
I am getting problem while writing data on excel file using jxl api.
When i write data on file and all handles associated to the file are closed, file size increases but when i open the file nothing is written in it and when file is closed manually from excel window, file size decreased to its original that was before writing data.
here is code:
          FileOutputStream os = new FileOutputStream(this.dirPath + this.fileName, true);
          WritableWorkbook this.workbook = Workbook.createWorkbook(os);
after writing data following handler are closed:
this.os.flush();
                    this.workbook.write();
                    this.workbook.close();
                    this.os.close();
                    this.os = null;
can any body help me.
Thanks in advance

Err, I did help you. I did understand your problem; and I solved it for you. What was missing was that you apparently made no effort to understand what you were being told. Or even consider it. You just argued about it, as though you were the one with the solution, instead of the one whose code didn't work.
And the other thing that was missing was the part where you said 'thank you' to me for solving your problem. Somewhat more appropriate than biting the hand that fed you, frankly. I do this for nothing, on my own gas, and it's extremely irritating when people keep asking about problems I have already solved for them. I am entitled to discourage that. It's part of making them more efficient actually.
But it happens often enough that it also makes me think I'm just wasting my time. Probably I am.

Linked Server in MS SQL Server 7.0

I created a linked server in MS SQL Server 7.0. DB Provider is OLE DB Provider for Oracle 8.1.7. All is working, but when I try to make select, insert or update from the Oracle table which conains data time NUMERIC (with size and scale 0) OLE DB Provider returns the Error message:
OLE DB provider 'OraOLEDB.Oracle' supplied invalid metadata for column %COLUMN_NAME%. The data type is not supported.
I've already downloaded and insatalled the new version of OLE DB Provider, but the problem still present.

Did you solve your Problem? I'm having exact same problem in my application. Can you or someone else help me?
Thanx
Bye Marco

Problem while uploading data with GUI UPLOAD Function

Hi,
I am facing problem while uploading data with FM GUI UPLOAD in out text file there are 7 row but after the FM GUI UPLOAD there are 14 entries are coming in Internal table and each alternate row is coming as blank with 0000 in some column in internal table first row is proper and second line is blank so on.
what can be the problem .
The program in which we are using this we are using it from last 2 year but we are facing problem today only.
regards,
zafar

Hi,
The file formate is same as it is from last two years it is automatically generated by one another bar code server and there is no change in the file formate.
So waht can be the problem to check any inconsistancy in system i have develop a samll program fro uploading a text file with same function module , but it is working fine.
regards,
zafar

Problem while retrving data from a view

Hi Friends
i have a problem while retriving data from a view <b>v_t685a</b>.
the error message is :""" "V_T685A" is not defined in the ABAP Dictionary as a table, projection view or database view."""
i wrote : select single VTEXT1 from V_T685A into w_cst_jin1 where
                    KSCHL = 'JIN1' and
                    KAPPL = 'V'.
how to retrive the data.
waiting for quick response
Regards
Mukesh

Hi
This is a Maintenance View, not a Database View
SO can't fetch data using select statement.
You can use the Table <b>T685</b> directly to fetch the condition Types data straight away instead of the view. write the same select for this table and use.
Regards
Anji
Message was edited by:
        Anji Reddy Vangala

Create linked server between MS SQL Server 2008 standard edition to MS SQL Server 2008 express edition

For the captioned issue, is it possible? We have successfully created linked server between 2 MS SQL server 2008 standard edition, but failed for the standard and express edition. Is there any trick to setup? Thanks.

Hello,
SQL Server Management Studio Express Edition may not allow to create a linked server, but the workaround is to use the T-SQL. You can use sp_addlinkedserver and sp_addlinkedsrvlogin.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

SQL 2012 Linked Server connection from SQL 2000

Hi,
Does anyone know if it's possible to create a linked server connection in SQL 2000 to a SQL 2012 instance?
If so, which provider should I use?
Many Thanks,
Phil

Hi Shanky,
I'm afraid you misunderstood my Q. The above posts show how to create a linked server connection FROM SQL2012 --> SQL 2000.
I'm trying to create a linked server connection FROM SQL 2000 --> SQL 2012.
Does anyone know if it's possible?
Many Thanks,
Phil
I guess you dont read posts patiently below link ,which i also posted in my first reply, has details about the same
http://social.msdn.microsoft.com/Forums/en-US/2e02c603-e28d-49eb-b073-548c59732b5d/linked-server-from-sql2012-to-sql2000?forum=sqlsetupandupgrade
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Problem while reading data from Serial Port

Hi All,
I am facing some problem while reading data from Serial Port.
As per the requirement I am writing the data on Serial Port and waiting for response of that data.
Notification for data availabilty is checked with method public void serialEvent(SerialPortEvent event) of javax.comm.SerialPortEventListener.
When we are writing data on the port one thread i.e. "main" thread is generated and when data availability event occures another thread "Win32SerialPort Notification thread" is generated. This creates problem for me as we can't control thread processing.
So can anybody pls explain me how to overcome this problem?
Regards,
Neha

My Problem is:-
I am simoultaneouly wrting data on port & reading data from port.
First I write data on port using outputStream.write() method. Now when target side sends me response back for the request on serial port DATA_AVAILABLE of SerialPortEventListner event occured,we are reading data from serial port.Now till the time we didn't get the response from target next command can't be written on the serial port. When we are writing data on port main thread is executed.Now my problem starts when DATA_AVAILABLE event occured.At this point another thread is created.Due to this my program writes data of next command without reading response of previous command.To solve this prob. I have used wait() & notify() methods as follows.But again due to this my pc hangs after execution of 2 commands. (PC hang in while loop in a code provided below.)
From SOPs I could figure it out that after 2 commands we are not able to write data on serial port so DATA_AVAILABLE event doesn't occure n pro. goes in wait state.
Can anybody help me to solve this issue.
Neha.
Code:
public void serialEvent(SerialPortEvent event)
          switch (event.getEventType())
               case SerialPortEvent.BI:
               case SerialPortEvent.OE:
               case SerialPortEvent.FE:
               case SerialPortEvent.PE:
               case SerialPortEvent.CD:
               case SerialPortEvent.CTS:
               case SerialPortEvent.DSR:
               case SerialPortEvent.RI:
               case SerialPortEvent.OUTPUT_BUFFER_EMPTY:
                             break;
               case SerialPortEvent.DATA_AVAILABLE:
                    try
                         dataThread = Thread.currentThread();
                         dataThread.setPriority(10);
                         dataAvailable = true;
                                                                                byte[] tempArray=new byte[availableBytes];
                                    inputStream.read(tempArray);
                                                                   catch (IOException io)
                         SOP(io, "Error in serialEvent callback call for event DATA_AVAILABLE");
public void writetoPort(byte[] data) throws IOException
                         outputStream.write(data);
                          while(finalTimeOut >= actualTime)
                        if( ! dataAvailable)
                                actualTime = System.currentTimeMillis();
                       else
          synchronized (mainThread)
               mainThread = Thread.currentThread();
               mainThread.wait();
public void sendDatatoUser(byte[] b) throws Exception, HWCCSystemFailure
          obj.returnData(b);
          synchronized(mainThread)
               mainThread.notify();

ISSUE:regarding production version tab of MRP4 of data transfer using BD10

Hi all,
This is regarding production version tab of MRP4 of data transfer using ALE idoc (BD10).
When i transfer the data using BD10 the production version is received at receiving end through segment
but not created in MRP4 view tab.An error is coming as-
"You wanted to maintain the master record of the material AB_06.04.09(2). However, it is already being processed by the user EBGABAP and is therefore locked."
I logged in as-EBGABAP
Please help me resolve the issue.
Thanks
Edited by: sanu debu on May 6, 2009 11:08 AM
Edited by: sanu debu on May 6, 2009 11:09 AM
Edited by: sanu debu on May 6, 2009 11:11 AM

>
sanu debu wrote:
> Hi,
> I have to upload production version tab data of MRP4 view(MM01).Please suggest a function moduleor bapi for the same.
>
> Thanks.
>
> Edited by: sanu debu on May 6, 2009 3:24 PM
BAPI_MATERIAL_SAVEDATA can be used, populate the respective fields in input parameter PLANTDATA

Document Splitting problem while posting asset acquisition using F-90

Hi,
We are using ECC 6.0 with document splitting functionality and are facing problem while posting asset acquisition using F-90.
The transaction entry details are as below:
Document Type - KR
Vendor Line Item PKey - 31
Amount - 10000
Asset Line Item with PKey - 70, Transaction Type - 100
Amount - 10000
The Document Splitting Rule - 0000000012 is used and the Field Status Group for the Vendor Reconciliation Account and Asset Reconciliation account have Cost Center, Profit Center and Segment as "Optional" field.
The Balance Sheet Item - Asset Reconciliation Account has been created as
Secondary Cost Element - 90.
The Profit Center and Segment field have been made mandatory and zero balancing is also set in the settings for Document Splitting.
While posting asset acquisition using F-90, we are getting the error message - "Balancing Field "Profit Center" in line item 001 not filled"
The first line refers to the Vendor Line item.
Please let me know how to overcome this error.
Regards,
Ramanand

Please follow the below path and do config :-
IMG>FA>Asset Accounting>Integration with the General Ledger>Additional Account Assignment Objects>Specify Account Assignment Types for Account Assignment Objects
here you have to put KOSTL (Cost center) for both against APC and Dep run for each Dep area.
Thanks
Pyare

Does the data transfer used in the back up in time capsule included in the data allowance from my service provider?

Is the data transfer used in the backup with airport time capsule included in the data allowance with my service provider?

gheefromsa wrote:
I am using Ethernet cable to connect TC to the modem. I am only backing up my mac book air within range of the TC. So I guess it will be OK from your reply. As a trial I did interrupt the back up by turning off the TC, disconnecting the Ethernet cable, turning TC back on. The mac would not connect wirelessly with the TC without the Ethernet connection.
It is not using ISP .. absolutely for sure. Well 99.999%.. absolute tends to be only in maths.
But you did the test wrongly.. I said to disconnect the modem.. during the backup.. not turn off the TC.. obviously once interrupted the TC will not work again until everything is plugged in.. but it will work even bridged for a short time.. just unplug the WAN port from the modem.
The test is moot now.. as I can give you a 99.999% promise it is not using ISP.

Linked Server Problem while SQL Data Transfer using Non-sys Admin Account

Similar Messages

Maybe you are looking for