Linked table in Access not displaying all SharePoint List columns

In Access 2007 I created a link to a list in SharePoint 2010.
Originally the modified by and created by columns were not visible in SharePoint. They did not appear in the Access table.
I made the two lists visible in Sharepoint and refreshed the link. However, the two columns did not appear in the Access table. I created a new .accdb file and re-created a link to the list yet the two columns still do
not appear in the table.
How do I get these two columns to appear in the Access table?
Thanks,
- Bruce

I figured it out by accident. The fields are in the linked table ... they are just hidden!
I face the same Problem with Access 2013 and SharePoint-Online from Office 365. I added additional columns to the list in SharePoint, but they won't appear in the linked table in Access. Even when I make all columns visible, they are not listed.
Updating data for the other columns works like a charm.
Any idea from anyone?

Similar Messages

Outlook not Displaying all Sharepoint 2007 Shared Calendar entries

Hello all, we have an issue that I've been working on for a while with no success.
One Sharepoint List (Calendar) with approval workflow, connected to Outlook. Two users with the same privileges to the list. Both users see all "approved" items when viewing the list via IE. One user can see ALL (approved and pending) items via
Outlook, the other only seems to be able to view SOME approved items (not all approved items) via Outlook.
So, my questions:
1. Any idea why outlook is displaying ALL items to User 1, when the list view in IE only shows approved items?
2. Why can User 2 only view some of the approved items via outlook? Rather than all items like user 1? (At the very least you'd expect User 2 to at least see all approved items.
Anyone seen this before? I give up...

I have seen a lot of weirdness with MOSS 2007 calendars syncing to Outlook, but as far as fixes, its normally not too bad. for this particular issue, you might just want to remove the calendars from their outlook and re-add them.
However, normally the most common issue is that outlook will allow users to create calendar entries that are invalid in SP. i.e. the SP calendar has a required field, but Outlook does not allow users to edit that field as its custom (or outlook lets
you keep the title empty which also causes weirdness in syncs).
I would look and see what columns are required on the list, then export the list to excel and look for any items which have empty required fields. Either, update those items, or delete them from the calendar, then resync to Outlook and it should be
good.
There may be something different, but this is the most common thing I see on these issues, let me know if it helps or not.
Christopher Webb | Microsoft Certified Master: SharePoint 2010 | Microsoft Certified Solutions Master: SharePoint Charter | Microsoft Certified Trainer| http://christophermichaelwebb.com

Form does not display all records from table

Hi guys
I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
Any help will be appreciated.
Thanks

hi
Set the block property of "Query All Records" to "YES"
hope it will work.
Faisal

Table not displaying all column

hi my table>adf table does not display all column when i run the application it only display the first three column but in design it display all column

hi user,
i think so some panelcollection is closely strecthed, so only this problem.
go to panelcollection make it as styleClass=" AFStretchWidth" .
solution:
if you are used panelcollection inside af:table means it will suits.
or else go to the af:table add this
styleClass=" AFStretchWidth"
columnStretching="last"
or else some problem:
please elaborate or else paste the part of the code.

Why data change in linked table in Access - link from Oracle DB

Can someone please help me to solve this situation? I try to find out why data is changed from Oracle to Access. I must come back to this thread because lot of data in my Oracle database is defined as NUMBER(22), and I am using Access heavily.
Here is the problem:
In Access, I created ODBC connection (System DSN) to Oracle 9.2 database by using Oracle driver (NOT Microsoft ODBC for Oracle). Then I linked tables from Access with the Oracle table. What happens is that the number in Access linked table is displayed as a scientific number. Is there a way that I can preserve whatever I have in Oracle database?
For example:
Comp_ID in Oralce is defined as NUMBER(22) = 40000000000324003; In Access it looks like this 4.0000000000324E+16.
What I have in my system:
1- Oracle 9.2 client
2- Oracle driver
3- Access 2003
4- Jet - SP 8

Can someone please help me to solve this situation? I try to find out why data is changed from Oracle to Access. I must come back to this thread because lot of data in my Oracle database is defined as NUMBER(22), and I am using Access heavily.
Here is the problem:
In Access, I created ODBC connection (System DSN) to Oracle 9.2 database by using Oracle driver (NOT Microsoft ODBC for Oracle). Then I linked tables from Access with the Oracle table. What happens is that the number in Access linked table is displayed as a scientific number. Is there a way that I can preserve whatever I have in Oracle database?
For example:
Comp_ID in Oralce is defined as NUMBER(22) = 40000000000324003; In Access it looks like this 4.0000000000324E+16.
What I have in my system:
1- Oracle 9.2 client
2- Oracle driver
3- Access 2003
4- Jet - SP 8

Finder not displaying all files in remote directory

Sorry, this is a repost as I have gotten no response from my original request here: Finder not displaying all files in remote directory
I've exported pictures from iPhoto on my iMac to a shared directory on my mac mini. When I access that directory from my iMac, I can see some but not all of the pictures. I know the pictures exported properly because I can see them all from the mac mini. I can open up a terminal window on my iMac and see all of the files; I can also open those files from the terminal.
I'm running OSX 10.9.4 on both computers, with the mac mini also running OSX Server. I've placed a screen grab below from my iMac of what Finder sees vs what I can see from the terminal.
Why isn't Finder displaying all of my files?

thanks for responding
Adding a new file to the shared folder results in me being able to see the new file from my clients regardless of where it was added from, however the "hidden" files do not suddenly pop up.
I tried a few more experiments that had interesting results, but still didn't lead me to an answer.
First I tried copying the files from the remote directory to a local directory; I did this in 2 different ways and had different results. Method A) I copied files from the mounted share to a local dir: "cp /Volumes/MyShare/dir/*.JPG .". Method B) I copied the files using secure copy: "scp user@server:/path/to/dir/*.JPG .".
Method A resulted in Finder not being able to see the files in the local directory, while Method B did. This was interesting and lead me to suspect an issue with the way I am sharing the directory on the server. From Server settings I have both afp and smb checked. I tried enabling only one or the other and reconnecting; but this did not fix the problem.
Next I tried exporting the photos from iPhoto again. Exporting them locally results in files that Finder can see. Exporting them to my server results the same bad behavior
Getting desperate, I also tried renaming all of the files from "*.JPG" to "*.jpg" but this didn't help.
One last experiment, I see the same behavior from both another Mac and a PC on my local network... FTP works fine.
Any more ideas?

AppleTV not displaying all movies in iTunes Store

I've had this problem for a while and can't figure it out... whether by Genre or even in the Top 100 HD rentals, AppleTV is not displaying all the movies from A-Z. I don't mean that the onesheet posters haven't loaded and the blank markers are in their place. I mean these screens literally do not show any more selections to scroll through... I get maybe less than a third, say into the F's, and there's no more movies.
Any ideas what is going on here and what the fix is? I've got the latest AppleTV updates installed, and I'm running 10.5.x on my computers.

Antonio Carusone wrote:
Winston, how do you know that Apple is aware of this issue? I haven't seen a press release for it. This problem has been driving me nuts and I hope it gets fixed soon.
Because I have access to a special restricted area of these forums and when an issue arises that appears to be a genuine Apple problem rather than simply a user problem I pass it on, so I know they know. And no, there is no response to pass on at this stage.

ASDM - does not display all the rules

Hello,
we replaced our PIX525 firewall with an ASA 5540 firewall, and now we see some strange behavior in ASDM.
ASDM does not display all the rules, but i see all all the rules in cli.
What can be the problem?
inside-asa# show ver
Cisco Adaptive Security Appliance Software Version 8.2(5)
Device Manager Version 6.4(5)

Sure, i think we can manage that but i can only reply after one or two weeks ( change management ).
But i thought that our ASDM version is OK with this ASA version, see the link,
http://www.cisco.com/en/US/docs/security/asa/asa82/release/notes/asarn82.html#wp309157
Thank you for you help.

Printer Properties not displaying all settings.

The Printer properties in Adobe Reader for Linux do not display all the available preferences for a given printer driver- and you are unable to edit the Printer Command in the Printer Properties window to get around this. This combo of limitations renders it useless in our environment.
We have a Savin C6055 printer in a multi-tenant facility. Each print job needs User Code associated with it for accounting purposes. The CUPS drivers for Savin support this quite nicely and other Linux apps (Evince, OpenOffice, etc.) allow you to access this setting in the print dialog. Adobe Reader does not.
This is a problem.

Hi Patrick,
This is something we're planning to fix in our upcoming major release of the Reader. To know about upcoming releases of the reader on Unix, stay tuned to the reader blog at http://blogs.adobe.com/acroread
Thanks for reporting!
Gaurav

DWMX Not Displaying All Files

Hello folks. This is my last attempt to locate a solution for
why my DWMX is not displaying all my files in my local or remote
folder. I have a new client who has put us in charge of moving
their site to a new server. When I create a new site in DWMX, it
allows me to download and upload just fine, ALL of the site.
Problem is, DWMX will only display a certain number of files in
both the local and remote views. In my windows explorer, it shows
all the files, on the new server it shows all the files, but DWMX
will not. The folder in question is the dumping ground for all
their self-managed content images for their site. So it is hard to
split these up into multiple folders and expect the code to work
properly.
Has anyone else experienced this problem? If so, is there a
solution to this problem with DWMX?
Thank you.

Are you using DMX6.0 or DMX6.1? If the former, please update
to the latter
at your earliest opportunity - use the updater on the Adobe
site, please.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"csnetworks" <[email protected]> wrote in
message
news:fai93r$hj$[email protected]..
> Hello folks. This is my last attempt to locate a
solution for why my DWMX
> is
> not displaying all my files in my local or remote
folder. I have a new
> client
> who has put us in charge of moving their site to a new
server. When I
> create a
> new site in DWMX, it allows me to download and upload
just fine, ALL of
> the
> site. Problem is, DWMX will only display a certain
number of files in
> both the
> local and remote views. In my windows explorer, it shows
all the files,
> on the
> new server it shows all the files, but DWMX will not.
The folder in
> question is
> the dumping ground for all their self-managed content
images for their
> site.
> So it is hard to split these up into multiple folders
and expect the code
> to
> work properly.
>
> Has anyone else experienced this problem? If so, is
there a solution to
> this
> problem with DWMX?
>
> Thank you.
>

Status bar of Oracle from runtime applet is not displaying all of a sudden

Hello,
The status bar of Oracle form runtime applet is not displaying all of a sudden..It was displaying before but now its not......It helps me to see errors......how can I restore it?

My console was set to a specific window name..it was not null at all....but the status bar wont show...
But I solved it ...by changing the applet size...
Applet container size is controlled by the HEIGHT and WIDTH parameters in the formsweb.cfg. To maximize the applet area to the size of the browser, do the following:
HEIGHT=100%
WIDTH=100%
Thank you all for your help and support...
Edited by: user10746194 on Feb 11, 2010 6:33 AM

I wanted to know if others were having difficulties getting All Day Events appear in the Notification Center in iOS 7. Currently my Calendar in the notification center will show events that are at certain times, but they will not display All Day Events.

I wanted to know if others were having difficulties getting All Day Events appear in the Notification Center in iOS 7.
Currently my Calendar in the notification center will show events that are at certain times, but they will not display All Day Events.

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

Oracle Table Values are not displayed when tried to display with Essbase

Hi,
I was trying to create a report with Oracle RDB Table and Essbase by following the steps given in "Federating Essbase and Relational Data Sources in Oracle Business Intelligence Suite Enterprise Edition Plus" document at the location http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/fed_data/fed_data.html.
I am able to see the members from the Essbase cubes and I can also see the Oracle Table values, if they are displayed individually (i.e. different reports) but when I try to get one report with Essbase values with Oracle table records then Oracle table records are not displayed and when see the query log I don't see the query for Oracle table but I see obviously MDX queries for the essbase.
Please help.
Regards,
Paresh

Hi,
Smitha, you can defnetly use dynamic table in interactive form. I had similar problem and I acheived like follwing:Basically you have to bind the table .
If you want to have fixed number of rows in the interactive form, then in wddoinit method bind the internal table to ur table node. for exmaple: if u want 2 rows in the form loop times . So by default when you open the form you will get two rows for the table.
**************BIND THE ITAB ****************************
DO 2 TIMES.
APPEND LW_LFBK TO LT_LFBK.
CLEAR LW_LFBK.
ENDDO.
CALL METHOD lo_nd_t_lfbk->bind_table
EXPORTING
new_items = LT_LFBK.
If you want to have dynmic table then take a submit button in the form instead of normal button,
in onaction submit write a loop every time you click that new submit button it should add a new row.
use above coding in onactionsubmit instead of doinit.
Thats it.
Regards,
Ravi

I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

And I cant work out why all of my pictures are not diplaying in iphoto?
Is this iPhoto on your Mac? Are you referring to the photos that were in your iPhoto LIbrary prior to the upgrade to iPhoto 11? If so then apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If that's not what you're referring to then you should describe what is happening in more detail. Remember we can't see your Mac or your iPhone so need detailed and accurate descriptions of what you're experiencing.
Also we need infomartion like do you have an iCloud account and are you logged into it on all of your devices, iPhoto and Mac? do you have Photo Stream enabled on both.
OT

Photo App does not display all photos

Running iOS 7.0.4 on an iPhone 4S. The new Photo App does not display all photos properly. All photos show up as thumbnails. However, when you tap on some of them, only a blank page is displayed. The rest is fine. This issue started after the upgrade to iOS 7. Is this a bug? Hardware-related?

Upon closer inspection it appears that the missing photos are in a folder called IPhoto Library. This folder is greyed out when I choose the import folder.
When I use 'show package contents' it reveals the missing photos (below). Why is my iphoto library so scrambled! Thanks for any insight.

Linked table in Access not displaying all SharePoint List columns

Similar Messages

Maybe you are looking for