Linking A LOT OF Tables in the same database

Hi,
Following is what I have been doing:
THE FOLLOWING STEPS ARE DONE PERIODICALLY (like every 30 seconds):
Get data from a database above a certain time stamp in a resultset
Select some rows based on ceratin values of certain columsn in the resultset
Change numbers to words and words to numbers in the selected rows using other tables in the same database
Display this info in a table.
Problem:
My program is working but it consumes an enormous time when it has to link those selected rows with other tables to get corresponding values. Once I have made a resultset of selected rows, whats the fastest way to change row fields in the result set to corresponding values in the other table.
Any iideas of even putting them in a table in an effecient manner would be greatly appreciated.

Hi atlantisLoveAngel,
I see you are new to these forums. In my opinion, it's not good practice to post exactly the same question to more than one forum, and you have posted this exact same question in the JDBC Forum.
As you can see, a lot of the people who visit these forums do check more than one of them, so it doesn't really increase your chances of getting a reply when you post the same question to different forums (even if you change the subject slightly).
I'm not sure if this will help you, but in case you haven't already seen it, perhaps the article entitled Christmas Tree Applications from the Swing Connection may be relevant?
Good Luck,
Avi.

Similar Messages

How do I join two tables in the same database and load the result into a destination table in a SSIS package

Hi,
I have a query that joins two tables in the same database, the result needs to be loaded in a destination DB table. How do I do this in SSIS package?
thank you !
Thank You Warmest Fanny Pied

Please take a look at these links related to your query.
http://stackoverflow.com/questions/5145637/querying-data-by-joining-two-tables-in-two-database-on-different-servers
http://stackoverflow.com/questions/7037228/joining-two-tables-together-in-one-database

Simultaneously Connecting Multiple Tables of the same Database to Textboxes of the same Form using a single ADO Control Code using VB6 Enterprise Edition and MS Access 2007

Iv 10 Tables consisting of atleast 10 fields each in a single Database. Bt, Im only able to connect 1 table at a time to a form using an ADO Control. Im able to add data from table 'student' to text-boxes in my form. Bt, hw can I add data from field(0) of
Table 'Student' to Textbox1 and data from field(0) of Table 'Marks' to Textbox2 using VB6??
This is the current sample coding iv got to connect a single table to a form:
Global con As New ADODB.Connection
Global rs As New ADODB.Recordset
Public Function Connect()
If con.State = 1 Then con.Close
con.Open "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + App.Path + "\bca.mdb;Persist Security Info=False"
End Function
Private Sub Add_Click()
If rs.State = 1 Then rs.Close
rs.Open "select * from student", con, adOpenDynamic, adLockOptimistic
rs.AddNew
rs.Fields(0) = (Text1.Text)
rs.Fields(1) = (Text2.Text)
rs.Fields(2) = (Text13.Text)
rs.Fields(3) = (Text4.Text)
rs.Fields(4) = (Text5.Text)
rs.Fields(5) = (Text6.Text)
rs.Fields(6) = (Text7.Text)
rs.Fields(7) = (Text8.Text)
rs.Fields(8) = (Text9.Text)
rs.Fields(9) = (Text10.Text)
rs.Fields(10) = (Text11.Text)
rs.Update
MsgBox " Record Added"
End Sub
What can I do to add fields from 2 different tables to different text boxes within the same form using a single ado control using vb6 and MS Access 2007??

Hi,
Since VB6 product is not supported in this forum, you may go to these forums for support:
#Where to post your VB 6 questions
http://social.msdn.microsoft.com/Forums/en-US/6a0719fe-14af-47f7-9f51-a8ea2b9c8d6b/where-to-post-your-vb-6-questions
Thank you for your understanding.
Best regards,
Franklin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do you insert new records into multiple tables using the same unique primary key?

I’ve created a PHP site and MySQL server using a free app called XAMPP. I have successfully created a form in Dreamweaver that will write data to a (name) table in the SQL database. Here’s my question: How do you write to two (or more) tables in the same database and pass the same primary key to both tables? In the SQL database, I defined the first field as ID and set it as the primary key with auto update. So, when you insert a new record, it creates a unique primary key for that record. In my form, I’m capturing info that needs to be stored to two tables at the same time; a Name table and Address table. Since the Name and Address tables use the ID field as the primary key, I believe I will need to pass the ID value from the Name table to the insert of the Address table to insure they both have the same primary key, right?

No. You probably need the primary key from one table to be a foreign key in the other tables. In any case, I believe you can use two methods to obtain the auto generated key. First with SQL:
http://dev.mysql.com/doc/refman/5.0/en/getting-unique-id.html
And the other using a PHP function:
http://us3.php.net/mysql_insert_id

Display a cruve and a table in the same servlet

Hi,
I want to display a curve in a servlet, I can do it, but I can't display the table which is after the curve, the code is the following :
public void doGet(HttpServletRequest req, HttpServletResponse resp) throws ServletException, IOException {
       XYDataset dataset = createDataset(pathFile, pathFileTimer);
      JFreeChart chart = createChart(dataset);
      resp.setContentType("image/png");
      OutputStream out1 = resp.getOutputStream();
      ChartUtilities.writeChartAsPNG(out1, chart, 800, 600);
      out1.close();
      PrintWriter out = resp.getWriter();
      out.println("<html>");
      out.println("<body>");
      out.println("<head>");
      out.println("<title>Informations batterie</title>");
      out.println("</head>");
      out.println("<body bgcolor=\"white\">");
      out.println("<TABLE id=\"Table1\" style=\"WIDTH: 864px; HEIGHT: 75px\" cellSpacing=\"1\" cellPadding=\"1\" width=\"864\" border=\"1\">");
...So how can I display the table in the same servlet ? Or perhaps can I display the curve in an another servlet, but it would be better to call this servlet automatically and not manually with a post method.
Thanks for any help.

So how can I display the table in the same servlet ?You can't. You either send HTML or you send PNG. You can't combine the two in the same request.
Or perhaps can I display the curve in an another
servlet, but it would be better to call this servlet
automatically and not manually with a post method.Yes, you would use another servlet to display the curve. Servlet A would generate the HTML, including a link to Servlet B. I don't know what you think the difference between calling a servlet automatically and manually is, but if you use this two-step process:
1. Decide what HTML you want the browser to see.
2. Write code to produce that HTML.
you will find things a lot less confusing.

Updating two tables at the same time

Please,
Does someone have an idea on how to update two tables at the same times?
Thanks a lot in advance

I was thinking about a single session and single update command.
That's why I thougth someone else could have a clue.
Thank you

Creating a database link to another schema in the same database

Hello,
I'm trying to create a database link to another schema in the same database. It was created without errors, but when I try to use it I receive "ORA-12154: TNS:could not resolve the connect identifier specified" message...
I'm trying to do it because on my production enviroment the databases are separated, so there I can use database links without problem, but in my development environment it's all in one database separated by schemas...
So I'm trying to simulate the same system to not need to rewrite the query every time I move from development to production environment.
Any ideas?
Thanks

Hi,
Yes, you can create a database link to your own database. I've done it before for exactly the same reason you want to.
(By the way, I think it's a good reason. What are the alternatives?
Having different versions of code for Development and Production? Absolutely not! Terrible idea!
Using synonyms or substitution variables that are set differently in the different databases? That might be more efficient than a database link, but efficiency probably isn't such a big issue in Development.
[Conditional compilation|http://download.oracle.com/docs/cd/B28359_01/appdev.111/b28370/fundamentals.htm#sthref250]? This might be good; it has all the efficienty of the above options, with more clarity.)
Assuming you do want to stick with a database link, not all errors are caught when you create the link.
Is the Development database in the tnsnames.ora file of the Development server? Do you have other database links, either in the Development server or pointing to it, that work? What is different about the ones that work, and the one that doesn't?
Edited by: Frank Kulash on Oct 14, 2009 1:58 PM
The more I think about this, the more I agree with the earlier respondent: synonymns are a good solution for this.
To that suggestion you replied:
On this way I might use "select * from SCHEMA.table" instead of "select * from table@SCHEMA"... I looking for an option to use the second way...Actually, the suggestion was that you say:
select *
from SCHEMA_table_ptr;where schema_table_ptr is a synonym.
In Development, that synonym is defined as schema.table.
In Production, that synonym is defined as table@SCHEMA
Why are you "looking for an option to use the second way"?
If you think that people reading the code should realize that the query is being done via a database link (at least in Production), then add a comment.

How to insert a UUID into multiple tables in the same form

I am trying to insert a UUID into 2 different tables at the
same time ie to let this be created in the form and then insert
this ID into 2 linked tables in a database using Access.
Does anybody have any suggestions on how to accomplish this?
Thanks very much

So you have one form that processes information for two
tables, or do you
have two forms (one for each table - except the UUID)?
If it is one form just run two SQL insert statements. One for
the primary
table, then one for the related table.
If it is two forms run the above two SQL statements then an
update statement
to finish filling the second table.
Or am I completely misunderstanding the issue?
Bryan Ashcraft (remove brain to reply)
Web Application Developer
Wright Medical Technology, Inc.
Macromedia Certified Dreamweaver Developer
Adobe Community Expert (DW) ::
http://www.adobe.com/communities/experts/
"weelco" <[email protected]> wrote in
message
news:esjtjj$qtc$[email protected]..
> Thanks for your quick reply, and yes I do know how to do
that however I
> would
> like to do this all in one form field so I would like to
create the UUID
> whith
> the same form that also submits it to another table, is
this possible or
> do I
> have to do that using multiple 'pages'?
>

Two tables in the same uix page

Hi! I work with Jdeveloper and UIX with the framework Jheadstart. I need to save data of two tables at same time; i mean , two tables in the same page which save with the same submitbutton. i have made some tries editing the service file, some templates and of course the page, but sometimes it works and sometimes not, i dont know what's happening and i really need to resolve this problem urgently. i hope someone can help me and i'd thank you a lot.
Thanks for your atention.

I'm sorry, but I'm going to need more details before I can help. If you can provide stripped down versions of your UIX page and Java code, perhaps I can be of service. Also, I would like to know which JDeveloper and UIX versions you are using.
Ryan Pollock
UIX Team

Is it possible to have 2 tables with the same name in an Orable database?

Hello,
I'm a complete Oracle newbie so please excuse my question if it's stupid.
I was trying to create 2 tables with the same name using different tablespaces but it does not seem to work. Like this (second time just change the name of the tablespace):
CREATE TABLE test_tbl (
id INTEGER,
status VARCHAR2(10),
last_modified DATE DEFAULT SYSDATE
TABLESPACE tblspc1Is it in general in Oracle possible to acquire this goal?
Thanks a lot!
P.S. I have already created the needed tablespaces
CREATE TABLESPACE tblspc1 DATAFILE 'tblspc1.dbf' SIZE 10MEdited by: 808239 on 02-Mar-2011 02:18

It is not possible to create two tables with same name in same schema.
A user can own one schema with his own name and another with the schema name SYS.
For this you have to grant sysdba privilage to the user and then have to connect using sys password or with the password specified in password file.
But this still you have to access to the table in sys schema using sys.table_name.
Hope Answered tthe Question.

Can I gather object statistics on large tables at the same time?

We have large partitioned tables to the tune of 3-4 billion rows, and they have no object statistics. Can I gather object statistics for them at the same time? For example, 4-5 large tables at the same time. I need to gather them in multiple tables because we have several of those large tables and I have to schedule the gathering carefully. So, I want to start at 4 tables. I'm wondering if gathering statistics on the above tables will be intrusive or will impact the performance while it is running.
Alex

What version are you running? If you are running 11g they are automatically gathered via the autotask job DBMS_STATS.GATHER_DATABASE_STATS_JOB_PROC which, depending on your window, will normally run daily at 10 pm. Im very surpised that no stats have been gathered as this collects stats on all new tables or if more than 10% of rows have been changed.
See the following links:
http://www.oracle-base.com/articles/11g/automated-database-maintenance-task-management-11gr1.php
http://docs.oracle.com/cd/B28359_01/server.111/b28274/stats.htm

Data from two tables in the same row in XML transformation

Hi,
I am using XML transformation for generating excel file which is to besent as email attachment.
Here I want to display the data from two internal tables in the same row in the excel. .I am using <tt:loop ref=".<table name>"> ... </tt:loop> for looping through the table. Can I loop two table simultaneously ? In that case how will I specify the fields in each table . Some of the fields in two tables are of same name and type.
Please help...
Thanks,
Jissa

Hello Brian,
Thank you for your answer. It is approach I will use, I think. However let me ask: Would it be possible to have a Version in this layout, too? I mean to see, which value comes from Version A and which comes from Version B? Something like this:
Calendar Month Version Sales Amount
2011.01 B 200
2011.02 B 300
2011.03 A 260
2011.04 A 230
2011.05 A 200
A

My 10 yr old wants to text from his iPod touch. We have 1 family Apple ID. How can I monitor his texts without receiving all of his friends messages? Do I need a separate Apple ID or can I link a new email address to the same Apple ID?

My 10 yr old wants to text from his iPod touch. We have 1 family Apple ID. How can I monitor his texts without receiving all of his friends messages? Do I need a separate Apple ID or can I link a new email address to the same Apple ID?

Just an email address
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime

How to insert into two differents tables at the same time

Hi
I'm newer using JDev, (version 3.1.1.2 cause the OAS seems to support just the JSP 1.0)
and I want to insert into two differents tables at the same time using one view.
How can I do that ?
TIA
Edgar

Oracle 8i supports 'INSTEAD OF' triggers on object views so you could use a process similar to the following:
1. Create an object view that joins your two tables. 'CREATE OR REPLACE VIEW test AS SELECT d.deptno, d.deptname, e.empname FROM DEPT d, EMP E'.
2. Create an INSTEAD OF trigger on the view.
3. Put code in the trigger that looks at the :NEW values being processed and determines which columns should be used to INSERT or UPDATE for each table. Crude pseudo-code might be:
IF :NEW.deptno NOT IN (SELECT deptno FROM DEPT) THEN
INSERT INTO dept VALUES(:NEW.deptno, :NEW.deptname);
INSERT INTO emp VALUES (:NEW.deptno, :NEW.empname);
ELSE
IF :NEW.deptname IS NOT NULL THEN
UPDATE dept SET deptname = :NEW.deptname
WHERE deptno = :NEW.deptno;
END IF;
IF :NEW.empname IS NOT NULL THEN
UPDATE emp SET empname = :NEW.empname
WHERE deptno = :NEW.deptno;
Try something along those lines.
null

How to use the TableSorter for two tables at the same view?

Hello,
I am using the TableSorter object in order to sort Dynpro tables.
Suppose I have two tables at the same view, is it possible to use it seperatly for both of them?
I assume that at the wdModifyView method I will need to catch the table that the user clicked on, yet I don't have an idea of how to do it...

Hi Roy,
Constructor of TableSorter
public TableSorter(IWDTable table, IWDAction sortAction, Comparator[] comparators)
So, you have to create instance of TableSorter class for each table on the view.
best regards, Maksim Rashchynski.

Linking A LOT OF Tables in the same database

Similar Messages

Maybe you are looking for