Linking Custom Storage Category to STandard Document Types

We have created Custom Storage Category ZSRM pointing to Content server.
We would like to link it with SRM document type defined in ECC in DMS.
Really appreciate if you can direct us where we can link the above two.
Additionally would be great to know , why for SRM DMS we have to set it up in ECC and why it is not available in SRM server.
Thanks In Advance.

Hi Sotage Catogories are defined and maintained in t-code OAC0 and OACT. Here you need to define certain parameter like area as document management then only these repositories are getting assigned to DMS.
Understood , so dms is having it's own classification (017) area without which we can not store dms document into any other servers or repositories. If you want to store in other module repositories, then you need to define this repository first in DMS.
I hope this will resolve the query.
Regards,
Ravindra

Similar Messages

  • Z-document-type vs. standard-document-type

    All,
    I'm facing a philosophical question:
    Since there's no REAL guideline for this I wanted to collect a few opinions and see where this is going.
    Whenever I'm part of an implementation project, there's a lot of discussion going on concerning the approach when it comes to the realization. The question is whether to take the original, i.e. SAP-standard-document-types and customize them according to my customer's requirement or FIRST copy them and THEN customize them.
    Don't want to present my personal opinion, yet, but I would appreciate you to post a few words on this!
    Thx & regards,
    Bobby

    True, true,
    but why not customize the SAP-tested stuff according your customer's requirements?
    The original SAP-setup may be copied from the golden client at any point in time, which is why I don't understand, why people tend to go the extra-step and copy it first (it always gives me the impression, that MORE than just customizing has been done to that type... especially, when it's poorly documented, which happens way too often!).
    Any other opinions on that?
    Regards,
    Bobby

  • How to populate custom fields in SAP standard Basic type DELFOR01(E1EDK09)

    I've a requirement to include and populate 2 custom fields in SAP standard basic type DELFOR01 and Segment E1EDK09 (it is at hierarchy level 1 ) .
    The requirement looks very simple but for this, as per my knowledge, I have to create a new  Basic type with the copy of segment E1EDK09 and attach it to outbound process code and write my own function module to populate the segments.
    It seems ok but the there are some existing codes in the user-exits for the SAP standard function module.These codes will not get triggered.(Or I've copy the user-exits code in my FM)
    Can we do it any other way to handle this kind of situation?
    Thanks in advance for your suggestions and help.

    Hi Phani,
    You have done it correctly. ECC additional data to be moved to EWM, 1. you need to enhance the CIF for master data/ bapi  to populate the data in the custom field in EWM. 2. Make your your are not enhancing only one structure. You need to do it in the CI includes so that the field is available in all the related tables/structures.
    3. The BAPI/FM which updated these tables will take care automatically to update the custom field data if the field is correctly added in all the tables.
    4. If the custom fields are added correctly and still the data is not getting saved , then need to check the mapping of the custom field and bepi extension.
    Let me know if this helps.

  • Custom report with  FAGLFLEXA and "Document type"

    We have new GL and we must do a custom report like this:
    Hierarchy of ProfitCentre ______Credit for mm.yyyy___ Debit for mm.yyyy 
    Profit centre 1_____________________ c1_______________d1
    Profit centre 2_____________________ c2_______________d2
    ect. ....
    The value of c1 is the sum of monthly credit for a profit centre, for a group of accounts, but only for certain "document type".
    The "Document type" is what worries me.
    I have already written a similar report with Report Painter, reading data from the table FAGLFLEXT (0FL library), but took the full credit from the account (for all "document type"), without restrictions on the document type (the table  FAGLFLEXT not contain the field "document type").
    The data I need in my report, I can see with T. FAGLB03. Double-clicking on, for example, the value of credit you go into detail, and data can be selected for different "Document type". I still do not understand how it works and which tables use the T. FAGLB03 to have these data in detail.
    Please, help me what exactly to do?My questions are these?
    My principals questions are these:
    1 . I think, inevitably, i have to link two tables: FAGLFLEXA (the one with the given to him) and GKFP that contains the field BLART (Document Type). This is the right way? Is there another way?
    2 This report can be create with one of SAP tools: Report Painter, SAP Query, ... or the only solution is to write a program in ABAP?
    3.  If i'm not asking too much, you could give me a step-by-step description of how i should proceed?
    All suggestions are welcome.
    Thank you in advance. Many points to assign who will help me to solve this problem

    I know PowerShell can help you with the Get-SCSMRelatedObject command but you would have to write a small script to get that to work en mass.
    http://smlets.codeplex.com/

  • Display mode for Account assignment category for NB document type

    Dear MM gurus,
    Is it possible to have Account assignment category field in ME21N for document type NB to be display only. Could any one please advised if this is possible?
    Thanks in advance.

    Hi,
    Yes it is possible. But u have to define ur own Field selection for the PO document type and u have to assign it in the document type NB. Go to SPRO>IMG>MM>Purchasing>Purchase Order-->Define Screen Layout at Document Level

  • SAP Standard Document type Deleted

    Hi All,
    SAP uses a Satndard Document type for Scheduling Agreeement -- LPA.
    This is not seen in any servers.
    how can i restore this back.
    Regards
    Amey

    I donot think you can restore it after deleting it.
    Go to SPRO> Materials Management>Purchasing>Scheduling Agreements>Define Document type
    Select Any existing document type and click on COPY AS  icon. Make sure you check the resease document indicator and also assign a different number range after you have recreated LPA by copying from LP or any other doc type

  • Can anyone give me a clear picture regarding standard document types?

    Hi DMS Experts,
    What are the main use of the std doc types - EBR,D01,Q01 and Q02 . I know that EBR is for batch input , D01 for print list , Q01 for Quality Agreement and Q02 for Technical Delivery Team . They are non editable and can be created after deleting only . For D01, I have found that Alternative screen is 902 and Alt screen exit is 'OADVS902'.
    and for EBR , it is '903' and 'PPPIF903' respectively.
    Are these values mandatory for the doc types EBR and D01. Also I have seen that for the above doc types,Kpro content server is not checked.
    Can we store them in Kpro content server also..?
    Thanks and Regards
    Aravind

    Hi,
    I think, you can't change the standard settings. You should create your own custom doc type.
    Read the below thread also:
    http://scn.sap.com/thread/1244212
    Regards
    Shishir

  • SAP Easy DMS - Link between Document Area and Document Types

    Deat Friends,
    Is there a transaction code or a customizing available to link the Document Area and Document Types??
    For example: Document Area (DMS) is linked with Document Type (DRW)
    Thank you,
    Sri

    Hello Chandu,
    We are trying to create a documents via TCODE: CVO1N
    One of the entry we need to populate is the "DOCUMENT TYPE" to create a document. If, we enter the Document Type = DRW, we are not able to see our custom Storage Category while attaching/Check-in a document.
    Where as, If, we enter the Document Type = DMO, we are able to see our custom Storage Category while attaching/Check-in a document.
    I see that the Document Type = DRW is linked to Document Area = DMS
    Similarly, the Document Type = DMO is linked to Document Area = FILESYSTEM
    My question is, Is there a transaction code or a customizing option available to link the Document Area and Document Type?
    Thank you,
    Sri

  • Document type and item category

    Hi All,
    I have created two document types in MM for creating Purchasing Requisition. One for material and for service and material. But when i am selecting service and material document type, the item category at item level is automatically converted to D(Service) even though i dont select any thing(material). I have not done any settings for iterm category based on document type. Pls let me know why i am facing this problem.
    Thanks,
    Raju

    Hi Amit,
    For both the document types (Material and service, service) the item category standard and service are assinged. I have checked in SPRO--->MM-->Purchasing->Purchase requisition-->Define document type--->Check Allowed item category assingment and Link purchase requisition document type.
    Hi Raghavendra
    If SAP standard service document type then we cant take material and can take service only for creating PR, but in my case i have created one document type and named it as service and for this document type i have assigned item category of service and standard. In this case it should allow me to create PR with standard item category, but its not allowing me to do so. Pls let me know how can i solve this issue.
    Thanks,
    Raju

  • PO document type not transferring to Customs management

    Hi,
    We have configured PO document type in GTS for Import and it got transfer to Complaince not to customs.  I have created CULOIM document type and item category on customs.  when i checked on this table /SAPSLL/V_TLEYVS i couldn't find CULOIM document type..  When i try to create a new one it say CULOIM document type already exist...
    I do not know why it is saying like that even document type not there in that table and where would i find that.
    One more question:
    When we assign document type to logical system on Customs we can see GTS document type field... when you press F4 you can see CD Cat - A... Can you tell me what is that and where do you define and assign to custom document type.
    regards
    rc gopi

    You can maintain the table by going into the SPRO and defining the doc tyoe you looking for , Onc eyou maintain there it reflects in in this table as it Configuration table.
    If you want to delete , add any entry directly in table then u can do that by getting in debug mode.
    Select a  entry in table
    Double click on it
    Do /h  to switch on the debugging
    Press Enter
    You will See different Case for "Code"
    Type the filed name Code in in "field Name"
    it will display the value 'SHOW'  you can change this value as desire like to Delete 'DELE' , to insert new value 'AVNO' and then click on change pencil.
    and press F8.
    Now you come to the screen where u can do the changes and save it.
    Custom Doc Category is taken automatically by SAP as for Export and Import doc type  in customs it is always A.
    If you cDefine Document Types for Advance Docs for Customs Declaration it is C.
    Each category has got it one chateristics , so if we defining correct documnet type we need not to worry for category as it will by default come as set in SAP.
    Kind Regards,
    Sameer

  • Assign partner determination procedure to Item Category/Sales document type

    Hello All,
    How can I assign a partner determination procedure to an item category or sales document type? That field is disabled in item category config step. Please suggest.
    Thanks,
    lavanya

    HI Lavanya,
    The partner determination will happen through a different way and not through item category definition.
    The path would be
    S&D->MAster Data->Bussiness partners->customers->Customer hierarchy->set partner determination for hirearchy categories.
    In this you will have one option to define by item category.
    Hope this helps.
    Abhishek

  • Billing block for customer for sales document type OR

    Hi
    I want to block a customer for a particular sales document type OR
    How to do it?
    Regards

    Hi Nikhil
    There is a field called "Check Partner Auth.", but it is necessary to create the order from a contract. This field is in sales document customizing VOV8.
    SAP Documentation:
    Check partner authorizations
    This check determines whether a partner is authorized to release against a contract.
    Procedure
    Here you can specify whether the check is to be performed against the partners in the contract or the partners in the customer hierarchy. If you do not want the check to be performed, leave the field blank.
    When you create a release order for a contract, the system determines whether a partner is authorized to release against the contract. The check is performed at header level. Depending on the rule you enter in this field, the system checks against one of the following:
    Partners in the contract
    If the partner has the partner function AG (sold-to party) or AA (sold-to party authorized to release) in the contract, the system accepts the partner as the sold-to party for the release order.
    Partners in the hierarchy
    If the sold-to party of the contract is at a higher level in the customer hierarchy to the partner who wants to release against the contract, the system accepts the partner as the sold-to party for the release order.
    Note
    If you create a contract with reference to another contract, the system does not run a check and it copies all the partners created in the target contract. If you do not want it to do this, use copying control in Customizing to change it.
    Regards.
    Mikel

  • SD document type link to FI document type

    Hi
    I have many document types for credit notes in SD.  When the accounting document is created they have the same doc type DG.   Our requirement is to have different FI document type for each of the SD document type.
    Where is the config to link this.
    Thanks Ashok

    Hi,
    The document type is linked to the billing document type config.
    Regards,

  • DMS Document Type - Repository

    Hi Experts,
    Need a help.
    Is this possible to link DMS document type (created with help of DC20) with dedicated content repository (OAC0)?
    Regards
    Adam

    Hi Adam,
    If you do not select the "KPRO" indicator then your original files will get uploaded on SAP database with different storage category.
    You can have different category for different document type...provided while uploading the document/file from CV01N/CV02N you should select the correct category from the pop up.
    Thanks
    Pravin

  • Reg: gl account vs document type

    hi guru's,
             how to find out wat r all the gl accounts available for a particular document type.which table contains all the gl accounts?????
    plz help me with this.
                      thx in advance....
    regards,
    balaji.s

    Hye balaji
    GL Accounts and Document types are independent in nature. You never link GLaccounts with document types.
    How ever in Document types you configure the account types.  ie Vendor accounts/customer accounts/Gl Accounts/ Mateial Acoounts/Asset accounts.
    If you select vendor and customer in particular document types you can post only vendor/customer line items through this document type. System will not allow to post GL items in this category.
    Regards
    Suresh

Maybe you are looking for