Linking Freight charges/installation charges in the catalog item

Hi CCM/MDM experts,
I have a requirement. Please look into it
In the catalog can we have installation costs/freight costs attached to an item?
When I select the item in the Shopping cart from catalog, it should bring cost of the item as well as additional cost under the pricing condition. The same thing should show up in PO.
The labor cost is expected to hit a different GL account.
Your help on this highly appreciated.
Thanks

Vemulap
In our system we list Delivery Charges as a separate Catalog item with a zero price for each vendor, (or a fixed price if one exists).
We allow our users to edit shopping cart items with a zero price but not those with a catalog price. This is bespoke in our system using a BADI.
We then direct the Freight charges to the correct GL account by linking to a UNSPSC code for freight.
By this method users can enter the delivery charges themselves when creating the Cart. This leads to a separate line on the PO for Freight that must be confirmed.
We tried to use pricing conditions but it gets horribly complicated and later on leads to problems with invoice entry if you have an organization with a large AP section as we have.
Hope this helps
Allen B.

Similar Messages

Why charged me twice for the same item? They have withdrew money from my bank account for the second time about half an hour later after the transaction was completed leaving me overdrawn.

Why charged me twice for the same item? They have withdrew money from my bank account for the second time about half an hour later after the transaction was completed leaving me overdrawn.

Hi Benjamins,
I've checked your account—you have two ExportPDF subscriptions. One placed on October 20 2013, and the other placed on October 11 of this year. So, you were probably charged the auto renewal for the subscription placed in 2013, and then the new charge for this year's order.
Please Contact Customer Care so that an agent can help get things situated for you. There's no reason to have two subscriptions to the same service, so an agent can help you cancel one, if you'd like.
Best,
Sara

SRM validate the Catalog Item when copying from old templates

Do SRM validate the Catalog Item when copying from old templates and previous shopping carts? Is this standard functionality?
Thanks,
Rajan

Continuation to my previous post:
My findings based on the analysis I did. Might help people who are looking for similar info.
As Jason mentioned, the Subroutine name is CATALOG_CONTENT_VALIDATE_GET
This is under package BBP_SC --> Function Group: BBP_SC_APP
After making a webservice call to get catalog details, the mapping is done as below.
IF sy-subrc EQ 0.
    READ TABLE lt_enriched_item INDEX 1.
    IF sy-subrc EQ 0.
      ls_item_validate-price      = lt_enriched_item-price.
      ls_item_validate-currency   = lt_enriched_item-currency.
      ls_item_validate-price_unit = lt_enriched_item-price_unit.
      ls_item_validate-deliv_date = lt_enriched_item-deliv_date.
      ls_item_validate-leadtime   = lt_enriched_item-leadtime.
      ls_item_validate-unit       = lt_enriched_item-unit.
    ELSE.
      lv_validate_item_exception = gc_yes.
    ENDIF.
ELSE.
    lv_validate_item_exception = gc_yes.
ENDIF.
If you go one level deeper into subroutine PERFORM sc_itm_copy_to_basket, you can see that following validations are performed.
If EITHER price, currency or price unit changes, we get the message u201C&: Price changed due to catalog validationu201D
If UOM changes, we get the message u201C&: Unit of measure changed in catalog; item not transferredu201D
When Delivery date or lead time changes, no message is raised but the new values are copied.
In a nut shell, the fields that are considered for validation are Price, Currency, Price Unit, UOM, Delivery date, Lead Time.
Thanks,
Seyed

TS1424 What should I do if the ITunes store charge me twice with the same item?

Hi, Has anyone been charged twice with just one same item by ITunes store? How could I get my money back?Thanks.

try doing a full reset bay going to system preferences .the go to general .but first make sure you have all your content and information back up before you doing the erase all content and settings ,because it going to delete all the content and information on the iPad going back in to factory settings

How to use the catalog in our own Web Dynpro program?

Hi Expert,
How to access MDM catalog and bring the product data back to a our own Web Dynpro program?

Hi Masa,
The Catalog Search UI of SRM that is referred to as UI as aforementioned is a page which is capable of the selection of catalog items is linked from the shopping cart creation.
Our biz requirement content two scenarioes to processing the purchase requirement.
A. Create shopping cart via the catalog (PR) --> SRM PO Process --> SUS(PO and Invoice)
This is the standard SRM purchase scenario and we have already implemented that.
B. Create a requirement document via the catalog (This document is same with the SC but very simple, and we create this function by the own web dynpro program) --> transfer the requirement document to other purchasing system(none SAP) in our intranet.
So the key problems we faced are below:
1. How to connect to the catalog search UI from our own web dynpro program.
( If we connect the catalog via the MDM ABAP API, that will make the catalog serach UI could not be used;
Also it has been failed to simulate the function of SC's connection to the catalog;
So we decide to link the catalog serach UI via the URL, the linkage is "http://<J2EEserver:J2EEport>/SRM-MDM/SRM_MDM?sap-locale=EN&HOOK_URL=&mask=&namedSearch=General&username=&password=&catalog=<Repository Name>&server=&datalanguage=EN". )
2. How to transfer the catalog item data to our own web dynpro program.
If we link the catalog search UI by URL, we can not find any good method to transfer the catalog item data to our own program.

OIM Catalog - hiding certain entries in the catalog for users.

Hi,
I'm trying to hide some entries for the common user in the Catalog. They should be visible for power users.
I'm looking into the filter model of the table-component, which seems like a logical way for me. But it seems that I would have to implement a lot of code? Is there something TableFilterBean
I'm wide open for suggestions on how to implement this. It doesn't have to be a filter Model.
The criteria is that based on the current user some of the catalog-items should be hidden.
[Catalog-customization|http://fusionsecurity.blogspot.no/2012/09/oim-11g-r2-catalog-customization-example.html] . This shows a way to avoid users selecting items, but my requirement is to hide them.
Regards,
Kenneth (Not very experienced with OIM :-) )

In order to hide a component of field, open that field in Web Composer by clicking on Customize link.
Select the component or field you want to hide, click on Edit Component button at the top.
Now you can see a property with the name Show Component.
Click on the Expression builder of the property and Replace "true" with the #{oimcontext.currentUser.roles['SYSTEM ADMINISTRATORS'] != null}
Now in this case if the user is having SYSTEM ADMINISTRATORS role then only the component or field is visible to the user.
You can put the condition with your own role.

Need to get catalog item from MDM of a specific supplier

Hi gurus,
i need to get the list of catalog item from MDM of a specific supplier,
user will give the supplier and i need to bring the list of the catalog item
that belong to the supplier that the user gave me,
through abap.
is anyone can help me with wich class+method do i need to use if i have the supplier name or id?
thanks in advanced,
dana.
Edited by: dana leving on Jan 10, 2011 3:59 PM

Hi Dana.
You can achieve this through MDM Webservices.
1. Create a MDM Webservice
2. Configure the tables and list the list of fields which you want to retrieve
3. You can specify the search criteria as well(supplier=XXX)
4. Generate it and save it
You can deploy the application in your landscape and call this webservice from your custom application to create shopping cart.
The below link will give you an insight of MDM Webservices.
http://help.sap.com/saphelp_nwmdm71/helpdata/en/45/018c03166a0486e10000000a155369/frameset.htm
Hope it helps.
Regards
Bala

Supplier Note gets copied from Catalog Item to Non-Catalog Item

Hi All,
The basic issue is that when we create a mixed shopping cart, cart with Catalog and Non-Catalog Items (Made using Describe Requirement link), the Supplier Note (in the Documents and Attachments part ) from the Catalog Item gets copied to the Non-Catalog Item directly when we create the Non-Catalog Item.
We face the issue only when the first Item is a Catalog Item. ...
There are no custom developments for the Supplier Note and we do not modify it directly in any other way. Any Ideas .. ?
Thanks and Best Regards,
Sagar Ogale

Hi Bharath,
The issue is that for the Non-catalog ( Item created using Describe Requirement ) in SRM 5.0, the supplier note field is getting populated by default. This is the issue.
The Supplier's Note should remain blank. But, its not... This is the issue. Do you have any ideas what may be causing the issue..?
Thanks and Best Regards,
Sagar Ogale

PO Partial confirmation Quantity not updated for non-catalog items in SRM

Hi Experts,
Partial Confirmation plus Partial Rejection from Ariba(Suppliers network) could not be processed.
Steps to Reproduce:
1) Create a purchase order.
2) Confirm some part of the quauntity and reject the balance part in Ariba.
3) Open the link in SRM and click Copy push button.
4) Click on Process PO and check PO, the PO is not updated with the changes done in Ariba
Expected Result:
PO should update the changes done in Ariba.
Here when part quantity is confirmed and part is rejected at Ariba, its sending a POR but SRM is not updating anything for non-catalog items when POR is copied onto PO.But where as in the Catalog items partially confirmed POR is copied onto PO.
kindly give your valuable inputs to poceed furthur.
Regards,
Chandu

Hi,
I'm not clear you issue. Is it SC -> PR(backend) -> PO(backend) classic scenario ? or You just created a PO in backend system?
BBP_GET_STATUS_2 will update SC follow-on doc information from backend.
Regards,
Masa

Content Query Web Part - in 2010 but Catalog-Item Reuse in 2013

In SharePoint 2010 I exported this SharePoint Links List to be a WebPart that I can put for things. It's our company's "Popular Links." "WE" decide what is "Popular." We have a few that I am sharing here.
In 2010 I got this to be a web part that I can pop onto multiple sites on our site collection. Now in 2013, I'd like to use Search if possible to get this to work. I tried and it didn't come out right.
SharePoint 2013 Enterprise Edition RTM dec 2013 CU
I tried the Items Matching a Tag and I set a tag to be "Popular Links" and set the tag on the items below in this graphic. I then set it to look only at these.
This is on the same page on the "home" page, publishing turned on. I don't have the "feel" of the first "list" that I did on the graphic above. It's not CSS as it is on the same page using the same master page.
Also when I click on the link it takes me to the displayform.aspx?id=1 page and I want to have the user just click the hyperlink.
Could I / should I use the Catalog-Item Reuse feature with publishing and get a new site collection setup with this? I am frustrated as I'd like to "share" information in another site, just as this "perfect" example (for me) to
show this information multiple times.
Thank you!

CQWB is supported for Publishing Sites or site having publishing feature turned on, on other it will not work as expected.
You can add it on the page from ribbon insert web part> from categories select Content Rollup > next pane slect Content Query.
http://info.axceler.com/Blog/bid/116286/Content-Query-Web-Part-vs-Content-Search-Web-Part
http://www.cwheeler76.com/Lists/Posts/Post.aspx?List=9a19060b-0efe-4368-8360-b07d23dc5c7b&ID=6&Web=916c3f13-7f62-4b71-b302-6fd9106b4bb2
here is MSDN to customize it:
http://msdn.microsoft.com/en-us/library/ff650512.aspx
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Catalog items visible to everyone, purchaseable only for some users

Hello everybody
Me again trying to find a solution to the following problem:
We need to have some items in our catalog that are visible for every user but only purchaseable via shopping cart / SRM for some authorized users. I couldn't find any possibility in the customizing. So my attempt would be to add an additional attribute in CCM where I can put some kind of flag and then to construct an authorization check based on that flag and on a authorization profile. In case the authorization check fails, the catalog item may not be put in the shopping cart. Preferabily the shopping cart icon should be disabled for such items.
Did somebody out there already think about something similar or already implemented something like that?
It would also be a good basis for offering a publicly viewable, browseable catalog for "window shopping", because I also didn't find a way until now to publish the catalog as a standalone web application without shopping cart functionality.
What do you out there think about it?
Kind regards,
Renaud

Hi Christophe
Thanks a bunch for your great help! I could solved the problem and am now able to have some catalog items visible but only purchaseable for authorized users. This is what I've done:
1. Create a new authorization class (SU21)
2. Create a new authorization object within this class
3. Create a new authorization field within this object
Don't forget to save and quit the SU21 transaction and then reenter it (/nsu21) because only then you'll see your changes / additions... seems to be a "refresh-bug" in SU21.
4. Create a new role (PFCG) and an authorization profile containing the new authorization object. Assign the values needed.
5. Create a new attribute in CCM and assigned it to OCI cust_field5 (because this one is of type TEXT50)
6. Implemented some code in BAdI BBP_CATALOG_TRANSFER:
DATA: wa_et_sc_item_data TYPE BBP_PDS_SC_ITEM_D.
DATA: wa_catalog_content TYPE BBP_WS_OCI_ITEM_S.
DATA: lv_authorized       TYPE c.
DATA: lt_limtab           TYPE TABLE OF string.
DATA: wa_limtab(10)       TYPE C.
DATA: lv_message_v1       LIKE SY-MSGV1.
DATA: lv_message_v2       LIKE SY-MSGV2.
DATA: lv_message_v3       LIKE SY-MSGV3.
DATA: lv_message_v4       LIKE SY-MSGV4.
LOOP AT et_sc_item_data INTO wa_et_sc_item_data.
* Get corresponding line from transferred catalog data
READ TABLE catalog_content INTO wa_catalog_content
                             WITH KEY line = wa_et_sc_item_data-number_int
                             BINARY SEARCH.
IF sy-subrc = 0.
*   If field content for checking authority against is not empty...
    IF NOT wa_catalog_content-cust_field5 IS INITIAL.
*     Perform authority check
      AUTHORITY-CHECK OBJECT '<your auth.object here>'
                      ID     '<your auth.field here>'
                      FIELD wa_tab.
      IF sy-subrc <> 0.
        MOVE wa_catalog_content-cust_field5 TO lv_message_v1.
        MOVE wa_et_sc_item_data-ordered_prod TO lv_message_v2.
*       Eliminate leading zeroes from product number
        WHILE lv_message_v2+0(1) = '0'.
          SHIFT lv_message_v2.
        ENDWHILE.
*       Output message
        MESSAGE ID     'ZXXX'
                TYPE   'W'
                NUMBER '000'
                WITH   lv_message_v1
                       lv_message_v2.
*       Remove item from SC
        DELETE et_sc_item_data.
      ENDIF.
    ENDIF.
ENDIF.
ENDLOOP.
Interesting observation is, that when issueing the message with type = 'I' it does not condense the message text. With type = 'W' it does...
I also found out the reason, why the way via ET_SC_MESSAGES will not work: SAP <b>has hard coded</b> somewhere after the BAdI call the message id and message number... so no way to bypass this without a modification.
Kind regards,
Renaud

Catalog Item Maintenance

Hi Gurus,
Is there a way to be able to keep the item prices in the catalog up to date? Right now, if there are 2 contracts created for item 1 given that the 1st contract has expired so the 2nd contract was created -- the catalog will still show items with 2 prices (one for each contract). Is there a way for hte system to exclude item prices for expired contracts?
Another scenario would be for items that have been inactivated because a new contract was created, the price of the inactive item would still show in the catalog.
How to go about this? I will Reward points

HI,
I think u might have maintained 1st contract in catalog item data.
U can check this and if that is still available then it will propose 1st contract price only becasuse that force the catalog item to take that price only.
Check this in individual item for cataloge.
Or need to check vendor list also. Make the same contract inactive in VLS if that availabe there.
Award points if suitable ans.
Navneet.

Custom Product catalog item text not displayed after product search

Hello Experts,
1. We have configured a custom PCAT_ITM text - Product catalog item text. - (say 000A )
2. Have appropriate text determination procedure, access sequence to determine this custom text
3. The text determination procedure has been chosen in the custom catalog type.
The above steps lets us use and publish this custom text in catalog using the text id ( TEXT000A_ ).
4. For accessing this text in the ISA Catalog search, we have maintained the text-id mapping in the file catalog-site-config.xml as follows:
<Map ID="siteMapID">
<Key ID="Subtitle">TEXT_000A</Key>
</Map>
Well, the issue now is, this setup works fine only in certain pages, but not in some other pages.
a. Works fine in ProductDetails.inc.jsp - currentItem.getAttribute("TEXT_000A") gives the right catalog item text value.
b. Doesn't work in organizer-content-product-search1.jsp - product.getCatalogItem().getAttribute("TEXT_000A"). Though the expectation is to get the catalog item text, we get a value "TRUE", yes (TRUE).
Can any expert tell if we are missing anything.
Easwar Ram

Hi Suvitha,
It may help in you looking up tables STXH / STXL before and after you make a change to one of your text objects ZPROD_DES.
Cheers,
Ashok.

After system copy (ccm), how to change logsys in catalog items?

Hello all
We're still on ccm 2.0 sp03 and did a system copy of our production ccm system to our test ccm system. But the catalog items still refer to the production logical system being the production R/3 system.
How can we change the logical system of catalog items without having to delete / rebuild our catalogs from scratch in our test system?
Using transaction BDLS or BDLSS does not work.
TIA
Renaud

Hi All,
I have similar scenario. Can anybody suggest the solution.
Regards,
Avinash

Leading zeros in product ID for catalog items

Hi,
Does anyone know why some product IDs in the catalog have leading zeros while some don't? It's a hassle to the users to add a wildcard character in the product ID when searching for items in the catalog just because the product ID format is inconsistent. How do we correct the existing catalog items with leading zeros in the product ID and how do we prevent this from happening again.
Many thanks,
Joy

Hi Joy,
Are the catalog items created in SAP CCM 2.0 SRM_EXTRACTED_CATALOG by extraction from SRM_SERVER or created manually by upload file or similar?
Regards,
Jason

Linking Freight charges/installation charges in the catalog item

Similar Messages

Maybe you are looking for