Reg: filters for the perticular vendor..

Hi all,,
I want to put Filters are required to be set up for particular Vendor number (Ex: 14562365). The Filters required are as below.
Message type Segm.type
MATMAS1 E1EMAS1
Can any body please tell me the procedure, how to do...

Hi Mahaboob,
you can set filters in Distribution model for the model view you ceated
To Define a filter object:
1) Navigate to the model view/message type that you want to filter, and expand the
tree to show filter groups.
2) Double click on "No filter set", (or "Data filter active", if one exists).
3) Click on Create filter group
4) Select the field that you want to use in the filter.
5) Enter the value to filter by.
6) Save the model.
Following transactions can help u for filtering data:
BD56 - segment level filtering
BD59 - filtering fields
Regards
Vinod
Edited by: Vinod Varyani on Feb 5, 2009 11:41 AM

Similar Messages

Blocking Vendor to create PO if any PO is exist for the same vendor

Dear All,
My scenario is , I want to restrict user to create PO for any vendor if for the same vendor PO is already available or not yet closed . System should allow user to create PO if previous PO are closed.
How to solve this issue.
Any user exit or BADI for this.
Regards,
Sanket

Hello,
Did you check the following Enhancement : MM06E004 in SMOD
As input the FM EXIT_SAPMM06E_004 uses the PO header and vendor data.
Based on this you can check if there is already a PO created for that vendor.
Wim

Alternate Address for the same Vendor Code.

Hi,
Can we maintain Alternate address for the same vendor code, if yes how can we maintain that? Plz. explain me.

Partner function also..u may have to create a new vendor code with new address...
https://www.ucflex.uc.edu/help/nav/accounts%20payable/course/vendor%20master%20data%20maintenance/file178/index.htm

Does RoboHelp 11 have the ability to add filters for the search function?

Does Robohelp 11 have the ability to add filters for the search function?

There's a page on my site about ZoomSearch. You can set up Rh to work with that and have a page with links or buttons that bring up different search options.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Post a witholding tax in two countries for the same vendor

Hi all,
I would like to know if there is any way (standar not development) to post a witholding tax in two countries for the same vendor belonging to a company code. (extended witholding tax scene).
System always display extended witholding indicators belonging to the country of the company code.
Thanks in advance.
Emilio Rozalén
SAP FI Consultant.

Hi B.Rama,
I think so, but Do you know the meaning of country witholding field in vendor master?.
Besides you can find this field in customizing, reports but I dont know its functionality.
Thanks and regards
Emilio Rozalé

How to findout the data source information for the perticular tables

Hi,
Can you please tell me the process to findout the data source information for the perticular tables .
For ex.. T2503 ,T2507 ,T25A1,T25A2 etc ..
I am doing a reverse engineering to find out the data sources build on the above SAP Tables.
Thanks.

Hi,
Still we haven't get the field level information ,before they send us we should first give them the corresponding data sources for the COPA tables which they have given .
I have searched in help.sap.com but I didn't find any information on this .
Please let me know is there any way to know the data source details for SAP Tables.
Thanks

Filters for the servlets

i have used filters for the servlets ...i am getting nullpointer error in the console..since i kept filter and filter is getting servletcontext object..but before servlet is initialized the filter class's doFilter method is called where it is getting servletcontext object which has to be produced only after servlet get initiated. Thats the problem with this filter!! could anyone guide me to solve this problem?
this is my filter class
The Logging Filter
import java.io.IOException;
import javax.servlet.Filter;
import javax.servlet.FilterChain;
import javax.servlet.FilterConfig;
import javax.servlet.ServletContext;
import javax.servlet.ServletException;
import javax.servlet.ServletRequest;
import javax.servlet.ServletResponse;
public class LoggingFilter implements Filter {
private FilterConfig filterConfig = null;
public void destroy() {
System.out.println("Filter destroyed");
this.filterConfig = null;
public void doFilter(ServletRequest request, ServletResponse response,
FilterChain chain)
throws IOException, ServletException {
System.out.println("doFilter");
// Log user's IP address.
ServletContext servletContext = filterConfig.getServletContext();
servletContext.log(request.getRemoteHost());
chain.doFilter(request, response);
public void init(FilterConfig filterConfig) throws ServletException {
System.out.println("Filter initialized");
this.filterConfig = filterConfig;
here is the servlet class
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class FilteredServlet extends HttpServlet {
public void doGet(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException {
response.setContentType("text/html");
PrintWriter out = response.getWriter();
out.println("<HTML>");
out.println("<HEAD>");
out.println("<TITLE>User Counter</TITLE>");
out.println("</HEAD>");
out.println("<BODY>");
out.println("IP:" + request.getRemoteHost());
out.println("</BODY>");
out.println("</HTML>");
and the xml file
<filter>
<filter-name>logging filter</filter-name>
<filter-class>LoggingFilter </filter-class>
</filter>
<filter-mapping>
<filter-name>logging filter</filter-name>
<servlet-name>FilteredServlet1</servlet-name>
</filter-mapping>
<servlet>
<servlet-name> FilteredServlet1</servlet-name>
<servlet-class>FilteredServlet1</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>FilteredServlet1 </servlet-name>
<url-pattern>/FilteredServlet1</url-pattern>
</servlet-mapping>

Hi
The code is ok, can run in tomcate.
You can get servletcontext from FilterConfig director.
When server start will be initalized, servletcontext has builded. So you can get servletConext even thought run method in Filter.init().
Hope can help you

SPAM filters for the IPhone

Are there any spam filters for the IPhone?

While there is a brief comment on what sounds like the solution elsewhere in this thread, I've set up a fantastic spam filter system. Here are the details:
1) You'll need a second account with your ISP or workplace. "[email protected]"
2) Mac Mail has a great series of rules, that with some work, can produce a very clean list of real mail, and a very short list of possible "wanted" mail. In my setting, I get more than 150 mail per day, only about 10 are real. We have three accounts, collectively I'll call them "[email protected]"
3) In the rule settings, make the "last rule" to forward all messages (mail does not need you to specify which box) to "[email protected]"
4) Set mail to check your accounts every several minutes, but to not remove mail from the server for a day or more.
This allows me to see each real e-mail ONCE on my desktop, as I need it on my laptop, and when I need it on my iPhone.
The important thing to remember, is to never send any mail from "[email protected]" else it will also start collecting spam on it's own. Conversely, never check the incoming mail from "[email protected]" on your iPhone for fear of inadvertently validating the address and attracting more spam.
Hope that this helps.
Adam
PS--You windoze folks may be out of luck. The Windoze mail clients often cannot recognize mail that they've already downloaded, or be as slick with setting up rules to handle the spam.

Bank account numbers for the same vendor in two company codes

Hi guys, just one question.¡
If I have the same vendors account number created in two different company codes, Is it possible to have different bank account numbers for each company code even though it is the same vendor number?
If its possible, what is the best approach to implement?
Best Regards.
Miguel

Hi
You will not get any implications for this.
All your transactions are made effect on your valuation area.
which may be company code or plant.
In mm01 you are maintaing that material for plant level.
So data related to this material is stored for perticular plant if you are valn area is plant.
Also for stock transfer order you will have to maintain this material for both plants or company codes.
regards
rb

Separate rates of TDS for the same vendor

Dear experts,
We need urgent help for the folloing scenario:
for a particular vendor, TDS has already been deducted @10% till now. Now the vendor has got exemption (upto Rs.40000 TDS to be deducted @1%). Above Rs.40000, the rate will be the same i.e 10%.
Please let us know, how to calculate this thru the system.
Thanks in adv.
Vijaya

Hi,
You can try out this option.
Create a new witholding tax code.
Tick the formula option.
Now goto "define formulas for EWT"
here for the tax type and tax code give as below:
tobase amt   wthtax reduce base amt
40000            1%
999999999     actual percentage
Once you assign this tax type and tax code system will calculate tax at 1% upto 40000 base amt and more than 40k at the actual rate.
Hope this is clear.
Pls assign points if this was useful.
Thanks,
Vamsi

Do I need lens filters for the EOS Rebel T3?

Do I need lens filters?

I agree with all the above...
If you shoot a lot of scenics, for example, a Circular Polarizer might be a very handy filter to have. It's useful to deepen the blue of the sky and make white clouds really stand out, to reduce or control reflections off water and glass, to increase color saturation in foliage and other things outdoors on overcast days, even in some portrait situations. It's one of the most useful of all filters, and also one of the most difficult (or impossible) to replicate in post processing softwares. I would encourage a C-Pol (sometimes "CPL") as one of the first and most important filters you might want.
Neutral density filters are handy for long exposure still photographs, such as making flowing water look "creamy". Today's DSLRs just don't have a low enough ISO setting, so ND filters can help in situations where you either want a long exposure or are trying to use a large aperture in stronger light. ND filters are gray all over to reduce the light reaching the sensor, and come in a wide variety of strengths: 1 stop, 3 stop, 6 stop, 10 stop and more.
I do carry UVs to fit all my lenses (well, at least all the ones that can be fitted with a filter). But they are stored in my camera bag until actually needed for protection. I'd install one if out shooting in a sand storm, for example.
If you go looking for Circular Polarizer or any other filter, don't skimp. Get a good quality, multi-coated to make for the best image quality. B+W MRC, Pro and Kaesemann are very good. Hoya HMC, SHMC, HD and HD2 are too. Also Marumi gets high marks (I haven't used them personally). Heliopan, Singh Ray and Lee are some other well respected brands.
I would encourage you to first get the matching lens hoods for all your lenses, though. A hood is great protection for the lens alone... But when using filters, it's even more important to use a hood (to also protect the filter... both from oblique light and from physical bumps).
Alan Myers
San Jose, Calif., USA
"Walk softly and carry a big lens."
GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
FLICKR & PRINTROOM

Having seperate filters for the table and sparkline

I created a dataset that shows Name, Number of Success and time for a record. the table keeps the number of successes per person for every hour for the last 24 hours. So every unique name has 24 entries in there.
I would like to come up with a table that will only show the name and the latest number of successes for a person; and to the right of the table, a sparkline that shows the trending for that person for the last 24 hours.
I do not want this to be an expandable table to right. Every row will show the data for a single name. No multiple columns for separate timing info.
So far I tried to apply multiple filters to my table but had no luck.
Any ideas is greatly appreciated.
Thanks

Hi masavran,
According to your description, you have several records group by Name in your report. Now you only want to show the last record of each group and add a line chart for each group. Right?
In this scenario, we can add a row inside of group and show the last record of the group. Then we add a line chart in this row. Set the series group on name, the chart will display the information of current group (Name). Also we need to hide the detail
row in the group so that it will only display the last row for each name. We have tested this case with sample data in our local environment. The design looks like below:
In this sample, we use Hour to show time and we only have data for previous 6 hours. The result looks like below:
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Reg: URL for the document

HI,
Iam working on EASYDMS.
I want to send an email thru workflow when ever a doc is created in in EASYDMS .The content of the mail should contain the URL link
so that when ever user click the URL the doc should open so that he can approve the doc ??
Can anybody help me with this req??
how to get the URL for the document which is being created??

hi,
thx .
I already implememnted the note and I got THE CONTEXT MENU send url/copy url .
so i cal slect the doc and right clcik onit and select the SEND URL....so tha it gives url .
BUT my req is : whenever a doc is created my wrokflow starts from BADI......here inthis BADI...itself I want to find the URL foe the document which is being created now.??
any idea??
AS PER THE NOTE WE GET THE URL.....once the doc is created and we slect the doc and right click and select the SEND URL....so tha it gives url

Reg : Enhacement for the transaction code MD04

Hi experts,
I have implemented an user exit for the transaction code MD04 where in the stock/requirement list I am supposed to add a new column for the exception number which displays the exception description for the corresponding exception number.
The coding part for fetching the exception description for the corresponding exception number is done in the include 'ZXM61U03'.
The problem is in the importing parameter IMDEZEXIT in which all the screen data will be present basing on which the data fetching is done .The AUSKT(Exception number) value is not getting populated . All the other data in the row is getting populated.
Please suggest e a solution for this.
Regards,
Ramkishore.

Hi
Hope it will help you.
reward if help.
Please use FM MD_STOCK_REQUIREMENTS_LIST_API to get all information for transaction MD04/MD05.
You might also want to check out the function module API.
MD_MRP_LIST_API
and also
check this link for extracting data from MRP tables:
http://www.sap-img.com/pp001.htm

Can multiple accounts for the same vendor be bookmarked?

I have home and office accounts for certain vendors (utilities, etc) and have tried bookmarking them under "On Line Accounts." However, I am not able to do so. When I enter one for home with, say, dteenergy.com (same problem with others like AT&T), that account works fine. When I try to enter the dteenergy account information for home, that works fine. However, when the second account is entered it replaces the first account.
I have not tried it, but I could try creating a second on line account, and will do so after I finish this inquiry. However, I had hoped to get everything into a single folder on the bookmark bar.
Thank you.

There are many ways of saving a bookmark, most don't permit the same exact page to be saved as a bookmark more than once - that's a feature in Firefox 3+ versions. If you "drag" the web site image ''(known as the Favicon)'' from the Location bar or from a Tab into your bookmarks, you can get around that "feature". You can "drag&drop" the Favicon into the Bookmarks Toolbar (can be tricky at times), or to the Bookmarks menu item on the Menu bar - the drop-down will open, or into the Bookmarks Sidebar (the method I use) - {Ctrl + B} to open the Bookmarks Sidebar

Reg: filters for the perticular vendor..

Similar Messages

Maybe you are looking for