Linking two PL/SQL queries in 10G reports builder

Hi,
I have two complex SQL queries and I want to link one to the other.
ie. I have a class of applicants and I want to retrieve their information, I do this with query one. Then for each applicant I have a number of checks all of which must be held in a cursor, so I have query two. But for each entry in query one I want to link it to the entry in query two.
Data links dont seem to work for PL SQL queries, so any suggestions on how I would do it?
Thanks G.

What is a PL SQL query?

Similar Messages

  • Writing SQL queries in BAM Reports

    Hi,
    Is it possible to write SQL queries in BAM Reports.
    thanks

    Depends on the version of BAM u are using
    For version 10.1.3.X u can use enterprise link or External data Source...
    FOr 11g u can use ODI or External Data Source ...
    Depends upon what is ur SQL doing

  • Extracting SQL Queries from Crystal Reports

    I am trying to find a way or a utility to be able extract SQL queries from Crystal reports into a text file for documentation purposes.  These queries are not in the repository, they were entered into each of the reports when the reports were being built and I can't find a way to extract them.  Any ideas/suggestions?

    Hello,
    CR doesn't have the ability, and I don't recall if this has ever been asked previously. Great suggestion for the Idea Place tab in the up right corner of this page.
    If you find a developer it's quite simple to get:
                // log onto the server and then get the SQL.
                rptClientDoc.DatabaseController.LogonEx("van-w-13-dwilli", "xtreme", "sa", "pw");
                GroupPath gp = new GroupPath();
                string tmp = String.Empty;
                rptClientDoc.RowsetController.GetSQLStatement(gp, out tmp);
                // show the SQL but easy enough to save the SQL text to a file.
                MessageBox.Show(tmp, "Data Source Set and SQL Statement", MessageBoxButtons.OK, MessageBoxIcon.Information);
    Of course you need to open the report first, lots of samples on how to...
    Thank you
    Don

  • How to pass an array or structure, in addition to a query, or multiple queries to the Report Builder as parameters

    Is there a way to pass an array or structure for example as parameters, in addition to a query, or multiple queries to the Report Builder in CF8? I believe this was recommended by users to be in CF8.

    BrianO,
    Although it's been a while, I thought I'd provide the code to do this for you. It works for me in CF8, and probably will in CF7.
    Here I create a structure called My, and provide that one parameter to my CFReportParam tag.
    <CFSet My = {
    Client = "Client Name",
    ReportDateFrom = DateFormat(ThisStartDate, DateMask),
    ReportDateTo = DateFormat(ThisEndDate, DateMask),
    PageHeaderImage = ImagePath & "\Logos\Page_Header.png",
    WatermarkImage = ImagePath & "\Logos\Watermark.png",
    GetBarSummary = GetBarSummary,
    GetPieSummary = GetPieSummary
    }>
    <CFReport Template="#ReportPath#\SpendSummary.cfr" Format="PDF" Query="GetSummary">
    <CFReportParam Name="My" Value="#My#">
    </CFReport>
    Inside the report itself, reference the given parameter as Param.My.PageHeaderImage for example. It can be referenced that way from any expression inside the report builder. You can even use the queries as the data source for charts (using the Data From a Query -> Query Builder -> Advanced) by entering "Param.My.GetPieSummary" where it says "Variable containing query object".
    HTH
    Swift

  • Download evaluation version of oracle 10g report builder

    Hi
    can anyone tell me how to download evaluation version of oracle 10g report builder for free.

    Hello,
    You can download Developer Suite here :
    http://www.oracle.com/technology/software/products/ids/index.html
    Regards

  • Two types of queries in one report

    Hello,
    Does anyone know if it is possible in reports builder to query from two different systems, DB2 - jdbc and oracle - sql and then join the data based off a related field from each query. Then use this joined data to build a report?
    Please let me know.
    Brian

    Since you can only login once, you will have to sort this out with a database link between the two databases. Use the Oracle gateway for DB2, or make a jdbc connection from Oracle to DB2.

  • Use css file in oracle 10g report builder

    hi every one
    i am using oracle 10g report buidler. i want control paramform by usign css file.
    any body have idea how can i use css file in oracle report builder 10g and how can i modify it's path and i how can i manage any css class on a perticular field.

    Thanks Billy.
    Yes you are right.
    Here why I discarded that option is,
    I may get the source files with changing layouts.
    My Actual scenario is as follows.
    Initially we developped all the things using PL/SQL packages. Its working fine.
    But as per the inputs we received from requirements group, the file structure changes dynamically. and we would able to consider those new columns also. We should be able to changes the rules dynamically.
    Lets say, we doing fullouter join on Src_A and Src_B. on columns col1_A and col1_B.
    Now the requirement changes in a way that, the join should be done on Src_A and Src_C. on columns col1_A and col_C.
    For this I need to define a new package.
    Instead of that, I would like to do everything dynamically based on configuration parameters given as input.
    Thank you,
    Regards,
    Gowtham Sen

  • SQL Server 2008 R2 - Report Builder 3.0 - timeout using shared data source and stored procedure

    I select the shared datasource from the data source propeties dialog, test the connection and everything is good.
    I add a dataset by selecting "use a dataset embedded in my report" option within the Dataset properties dialog.
    I select the newly added data source, click the "Stored procedure" query type and drop down the list box and select my intended stored procedure.
    the timeout for the dataset is "0" seconds.
    I click the "OK" button and I'm presented with the parameters to the stored procedure.
    I enter valid data for the parameters and click the "OK" button.
    I then get the following error message after 30 seconds:
    The problem is, all of the timeouts, that I'm aware of, have values of zero (no timeout) or high enough values that 30 seconds isn't even close to the timeout.
    I think the smallest timeout we have is 120 seconds.
    I have searched this site and many others and the solutions all involve altering the stored procedure to get the fields into report builder and then revert the stored procedure back to its original form.
    To me, this is NOT a solution.  
    I have too many stored procedures that need to be brought into Report Builder.
    I need a real solution.
    Thank you for you time, Tim Caldwell.
    Timothy E Caldwell

    I don't mean to be rude, but really, check to see if the stored procedure can return data rows???
    Maybe I'm not being clear enough.
    The stored procedure runs perfectly fine.
    it runs perfectly fine in the production environment and the test environment.
    I can access the stored procedure in several ways and have it return correct data.
    I can even trick report builder into creating a dataset with parameters and run the stored procedure that way.
    What I cannot do, is to get report builder to not timeout after 30 seconds on the initial creation of a dataset with a Query type of stored procedure.
    I have seen this issues posted again and again and again on may different sites and the "solution" is to simplifiy the stored procedure by creating a stored procedure that has a create table and a select in the stored procedure and that's it.  After
    report builder creates the dataset the developer then has to replace the simplified stored procedure with the actual stored procedure and everything works fine after that.
    HOWEVER, having to go through this process for 70 or more stored procedures is ridiculous.
    It would appear that there is something within report builder itself that is causing this issue.
    The SQL Script included is an example of a stored procedure that will not create fields create a dataset with fields and parameters in Report Builder 3.0:
    USE [CRUM_IT]
    GO
    /****** Object: StoredProcedure [dbo].[COGNOS_Level5ScriptSP] Script Date: 11/17/2014 08:02:26 ******/
    SET ANSI_NULLS ON
    GO
    SET QUOTED_IDENTIFIER ON
    GO
    ALTER procedure [dbo].[COGNOS_Level5ScriptSP]
    @CompanyCode varchar(8) = null,
    @GetSiblings varchar(1) = 'N'
    as
    Begin
    -- get emergency contact info
    select *
    into #tmp_Contacts
    from
    (select
    ConEEID,
    con.connamelast as [Emer Contact Last Name],
    con.connamefirst as [Emer Contact First Name],
    con.connamemiddle as [Emer Contact Middle Initial/Name]--,
    ,ROW_NUMBER() over (Partition by ConEEID order by ConNameLast)as rn
    ,ISNULL(
    case when con.conphonepreferred = 'H'
    then '(' + substring(con.conphonehomenumber, 1, 3) + ')' + substring(con.conphonehomenumber, 4, 3) + '-' + substring(con.conphonehomenumber, 7, 4)
    else '(' + substring(con.conphoneothernumber , 1, 3) + ')' + substring(con.conphoneothernumber , 4, 3) + '-' + substring(con.conphoneothernumber , 7, 4)
    end,
    ) as [Emergency Phone]
    from [ultiprosqlprod1].[ultipro_crum].dbo.Contacts con
    where con.ConIsEmergencyContact='y'
    and con.ConIsActive='y'
    ) A
    where A.rn = 1
    CREATE TABLE #tmp_CompanyCodes (CompanyCode varchar(8))
    If @GetSiblings = 'Y'
    Begin
    INSERT INTO #tmp_CompanyCodes (CompanyCode)
    EXEC [z_GetClientNumbers_For_ParentOrg_By_ClientNumber] @CompanyCode
    End
    INSERT INTO #tmp_CompanyCodes
    values (@CompanyCode)
    select *
    into #tmp_Company
    from [ultiprosqlprod1].[ultipro_crum].dbo.Company
    where cmpcompanycode in (select CompanyCode from #tmp_CompanyCodes)
    select distinct
    cmpcompanycode as [Client ID],
    CmpCompanyDBAName as [Client Name],
    eec.eecEmplStatus AS [Employment Status],
    eec.eecEmpNo AS [Employee Num],
    rtrim(eep.eepNameLast) AS [Last Name],
    rtrim(eep.eepNameFirst) AS [First Name],
    isnull(rtrim(ltrim(eep.eepNameMiddle)), '') AS [Middle Initial/Name],
    rtrim(eep.eepAddressLine1) AS [Address Line 1],
    isnull(rtrim(eep.eepAddressLine2), '') AS [Address Line 2],
    eep.eepAddressCity AS [City],
    eep.eepAddressState AS [State],
    CASE
    WHEN len(eep.eepAddressZipCode) > 5 and charindex(eep.eepAddressZipCode, '-', 1) = 0
    THEN substring(eep.eepAddressZipCode, 1, 5)
    ELSE rtrim(eep.eepAddressZipCode)
    END AS [Zip code],
    CASE
    WHEN len(eep.eepAddressZipCode) > 5 and charindex(eep.eepAddressZipCode, '-', 1) = 0
    THEN substring(eep.eepAddressZipCode, 6, 4)
    WHEN len(eep.eepAddressZipCode) > 5 and charindex(eep.eepAddressZipCode, '-', 1) > 0
    THEN substring(eep.eepAddressZipCode, charindex(eep.eepAddressZipCode, '-', 1) + 1, 4)
    WHEN len(eep.eepAddressZipCode) <= 5
    THEN ''
    END AS [ZIP + 4],
    substring(eep.eepSSN, 1, 3) + '-' + substring(eep.eepSSN, 4, 2) + '-' + substring(eep.eepSSN, 6, 4) AS [SSN],
    isnull(convert(VARCHAR(10), eep.eepDateOfBirth, 101), '') AS [Date Of Birth],
    eetFED.TAXCODE AS [FED Tax Code],
    eetFED.FILINGSTATUS AS [Fed Filing Status],
    eetFED.EXEMPTIONS AS [Fed Exemption Allowance],
    eetFED.ADDITIONAL AS [Additional Fed Withholding],
    eetSIT.TAXCODE AS [SIT Tax Code],
    eetSIT.FILINGSTATUS AS [State Filing Status],
    eetSIT.EXEMPTIONS AS [State Exemption Allowance],
    eetSIT.ADDITIONAL AS [Additional State Withholding],
    isnull('(' + substring(eep.eepPhoneHomeNumber, 1, 3) + ')' + substring(eep.eepPhoneHomeNumber, 4, 3) + '-' + substring(eep.eepPhoneHomeNumber, 7, 4), '') AS [Home Phone],
    isnull((SELECT cod.codDesc
    FROM [ultiprosqlprod1].[ultipro_crum].dbo.Codes cod WITH (NOLOCK)
    WHERE cod.codCode = eep.eepEthnicID
    AND cod.codDosTable = 'ETHNICCODE'), '') AS [Race-Origin], --eep.eepEthnicID AS [Race-Origin],
    eep.eepGender AS [Gender],
    isnull(convert(VARCHAR(10), eec.eecDateOfOriginalHire, 101), '') AS [Original Hire Date],
    isnull(convert(VARCHAR(10), eec.eecDateOfSeniority, 101), '') AS [Seniority Date],
    isnull(convert(VARCHAR(10), eec.eecDateOfTermination, 101), '') AS [Termination Date],
    isnull(eecTermType,'') as [Termination Type],
    isnull(TchDesc, '') as [Termination Reason],
    rtrim(eec.eecJobCode) AS [WC Code],
    isnull(eec.eecJobTitle, '') AS [Job Title],
    pgr.pgrPayFrequency AS [Pay Frequency],
    eec.eecFullTimeOrPartTime AS [Full/Part Time],
    eec.eecSalaryOrHourly AS [Pay Type],
    isnull(convert(MONEY, eec.eecHourlyPayRate), 0.00) AS [Hourly Rate],
    isnull(eec.eecAnnSalary, 0.00) AS [Annual Salary],
    [YTD Hours],
    isnull(eep.eepNameFormer, '') AS [Maiden Name],
    eec.eecLocation AS [Location ID],
    rtrim(eec.eecOrgLvl1) AS [Department ID],
    eec.eecorglvl2 AS [Cost Item],
    eec.eecorglvl3 as [Client Project],
    eec.eecPayGroup as [Pay Group],
    isnull(eepAddressEMail,' ') as [Email Address],
    isNull(BankName1,' ') as PrimaryBank,
    isNull(BankRoute1,' ') as PrimaryRouteNum,
    isNull(Account1,' ') as PrimaryAccount,
    isNull(AcctType1,' ') as PrimaryAcctType,
    isNull(DepositRule1,' ') as PrimaryDepositRule,
    isNull(BankName2,' ') as SecondaryBank,
    isNull(BankRoute2,' ') as SecondaryRouteNum,
    isNull(Account2,' ') as SecondaryAccount,
    isNull(AcctType2,' ') as SecondaryAcctType,
    isNull(DepositRule2,' ') as SecondaryDepositRule,
    isNull(
    CASE
    WHEN DepositRule2 = 'D'
    THEN '$' + convert(varchar, cast(EddAmtOrPct2 AS decimal(10,2)))
    WHEN DepositRule2 = 'P'
    THEN convert(varchar, cast((EddAmtOrPct2*100) AS decimal(10,0))) + '%'
    ELSE null
    END,' ') as SecondaryDepositAmount,
    isNull(BankName3,' ') as ThirdBank,
    isNull(BankRoute3,' ') as ThirdRouteNum,
    isNull(Account3,' ') as ThirdAccount,
    isNull(AcctType3,' ') as ThirdAcctType,
    isNull(DepositRule3,' ') as ThirdDepositRule,
    isNull(
    CASE
    WHEN DepositRule3 = 'D'
    THEN '$' + convert(varchar, cast(EddAmtOrPct3 AS decimal(10,2)))
    WHEN DepositRule3 = 'P'
    THEN convert(varchar, cast((EddAmtOrPct3*100) AS decimal(10,0))) + '%'
    ELSE null
    END,' ') as ThirdDepositAmount,
    Supervisor,
    eec.eecEEID AS [Employee EEID],
    eec.EecJobCode As [Job Code],
    isnull(eec.EecTimeclockID,' ') As [Time Clock ID],
    con.[Emer Contact Last Name],
    con.[Emer Contact First Name],
    con.[Emer Contact Middle Initial/Name],
    con.[Emergency Phone]
    from [ultiprosqlprod1].[ultipro_crum].dbo.empPers eep WITH (NOLOCK)
    inner join [ultiprosqlprod1].[ultipro_crum].dbo.empComp eec WITH (NOLOCK)
    ON eep.eepEEID = eec.eecEEID
    inner join #tmp_Company cmp WITH (NOLOCK)
    ON eec.eecCOID = cmp.cmpCOID
    inner join [ultiprosqlprod1].[ultipro_crum].dbo.PayGroup pgr WITH (NOLOCK)
    ON eec.eecPayGroup = pgr.pgrPayGroup
    left outer join [ultiprosqlprod1].[ultipro_crum].dbo.TrmReasn
    on tchCode = eecTermReason
    left join (select CAST(sum(isnull(eee.eeeYTDHrs,0.00))AS DECIMAL(18,2)) as [YTD Hours],
    eeeEEID,
    eeeCOID
    from [ultiprosqlprod1].[ultipro_crum].dbo.EmpEarn eee with (NOLOCK)
    group by eeeCOID,eeeEEID)eee
    on eec.eecEEID = eee.eeeEEID
    and eec.eecCOID = eee.eeeCOID
    left join (SELECT eetCOID AS COID,
    eetEEID AS EEID,
    eetTaxCode AS TAXCODE,
    eetFilingStatus AS FILINGSTATUS,
    eetExemptions AS EXEMPTIONS,
    eetExtraTaxDollars AS ADDITIONAL
    FROM [ultiprosqlprod1].[ultipro_crum].dbo.empTax WITH (NOLOCK)
    WHERE eetTaxCode = 'USFIT'
    )eetFED
    ON eec.eecCOID = eetFED.COID
    and eec.eecEEID = eetFED.EEID
    left join (SELECT eetCOID AS COID,
    eetEEID AS EEID,
    eetTaxCode AS TAXCODE,
    eetFilingStatus AS FILINGSTATUS,
    eetExemptions AS EXEMPTIONS,
    eetExtraTaxDollars AS ADDITIONAL
    FROM [ultiprosqlprod1].[ultipro_crum].dbo.empTax WITH (NOLOCK)
    WHERE eetTaxCode like '%SIT'
    AND eetIsWorkInTaxCode = 'Y'
    )eetSIT
    ON eec.eecCOID = eetSIT.COID
    and eec.eecEEID = eetSIT.EEID
    left outer join (SELECT eddCOID,
    eddEEID,
    eddEEBankName BankName1,
    eddEEBankRoute BankRoute1,
    eddAcct Account1,
    EddAcctType AcctType1,
    EddDepositRule DepositRule1,
    EddAmtOrPct EddAmtOrPct1
    FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpDirDp WITH (NOLOCK)
    WHERE eddSequence = '99')edd
    ON eec.eecCOID = edd.eddCOID
    and eec.eecEEID = edd.eddEEID
    left outer join (SELECT eddCOID,
    eddEEID,
    eddEEBankName BankName2,
    eddEEBankRoute BankRoute2,
    eddAcct Account2,
    EddAcctType AcctType2,
    EddDepositRule DepositRule2,
    EddAmtOrPct EddAmtOrPct2
    FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpDirDp WITH (NOLOCK)
    WHERE eddSequence = '01')edd2
    ON eec.eecCOID = edd2.eddCOID
    and eec.eecEEID = edd2.eddEEID
    left outer join (SELECT eddCOID,
    eddEEID,
    eddEEBankName BankName3,
    eddEEBankRoute BankRoute3,
    eddAcct Account3,
    EddAcctType AcctType3,
    EddDepositRule DepositRule3,
    EddAmtOrPct EddAmtOrPct3
    FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpDirDp WITH (NOLOCK)
    WHERE eddSequence = '02')edd3
    ON eec.eecCOID = edd3.eddCOID
    and eec.eecEEID = edd3.eddEEID
    left outer join (SELECT eecCOID,
    eecEEID,
    rtrim(eepNameLast) + ', ' +
    rtrim(eepNameFirst) + ' ' +
    isnull(rtrim(ltrim(eepNameMiddle)), '') AS [Supervisor]
    FROM [ultiprosqlprod1].[ultipro_crum].dbo.EmpComp WITH (NOLOCK)
    join [ultiprosqlprod1].[ultipro_crum].dbo.EmpPers with (NoLock)
    on eeceeid = eepeeid)eec2
    ON eec.eecSupervisorID = eec2.eecEEID
    left outer join #tmp_Contacts con
    on eep.eepEEID = con.ConEEID
    order by [Client ID],
    [Last Name],
    [First Name]
    drop table #tmp_Contacts
    END
    Timothy E Caldwell

  • Need help understanding MS SQL Server 2008R2 and Report Builder 3.0 and user access / priviledges.

    Having Problems with connections and access.  I have spent the last 2 days reading various threads regarding SQL Reporting Services pertaining to access and connections.
    First, let me explain what I have done to date.
    1)  I am using Windows 7 - Home Premium.
    2)  I downloaded and installed MS SQL Server 2008 R2 Express.  This was successful.
    3)  I downloaded Report Server 3.0 - This was successful.
    4)  In IE, I tried logging onto http://servername/reports, but this failed.  After logging into IE
    via ' Run Administrator', I was able to access URL.  
           Next, I updated the security / trust sites as explained in the
    threads
    Next, I went to Folder Setting and added my user name and granted all roles (Browser,
    Content Manager, My
    Reports, Publisher and Report Builder).
    5)  Now, I can log into Http://servername/reports using my normal windows 7 user account.
    6)  Next, I opened Report Builder 3.0.  However, I am having trouble connecting to report  
    server.  I tried connecting with
    http://servername/reports, but this failed. 
           However, If I change URL to http://servername/reportserver, it works.  BUT NOW, I have
    another problem.  When I
    execute the RUN button to create report, I get a  permission
    error.  "PERMISSION GRANTED TO USER ARE
    INSUFFICIENT FOR  PERFORMING THIS OPERATION".
    7)  Finally, I can not save reports to http://servername/reportserver when I select "Recent
    Site and Servers".  ERROR
    MESSAGE:  UNABLE TO OPEN OR SAVE REPORT
    8)  In my Reporting Services Configuration Manager:
    Web URL = http://servername:80/ReportServer
    Report Manager URL = http://servername:80/reports.
                What is strange, the Report Manager URL works for IE URL and WEB URL works for
    Report Builder connect (Even though it really does not work). 
    THREE QUESTIONS:
    1)  What URL should I use to connect in Report Builder.  
    2)  How do I update my normal Windows 7 user so I can run reports when I connect to report
    builder.        
    3)  How can I save my reports so they are displayed in IE Reporting services.  Note:  I was
    able to save report to
    documents folder and import into IE Reporting Services.
    4)  And finally, is it possible to add report builder 3.0 as a tab in my IE Reporting Services.  I
    save seen samples of Reporting Services screens where the instructor has Report Builder
    tab.
    Thanks
    Dan

    To answer question 1... it should connect through /ReportServer
    http://bretstateham.com/reporting-services-architecture-diagram%E2%80%A6/
    Report Builder 3.0 is not a web application, it is a client side application can be used using the click-once or downloaded from Microsoft's website.  If you are having issues, you might download and install it and try running it as an administrator.

  • Custom fonts not displayed when PDF is generated using 10g Report builder

    Hi
    I have two fonts , abc.ttf and def.ttf which I have placed under C:\Windows\fonts. One of these displays a logo and the other displays barcode
    I have added the environment variable REPORTS_PATH which has value C:\Windows\fonts. I have also added entries for PDF Subset in uifont.ali.
    But still when I run the report and out to a PDF file, the fonts are not displayed. They are remapped to some other fonts.
    When I check PDF document properties in Adobe reader, under fonts tab it says
    abc
       Type:Type1
       Encoding:ANSI
       Actual Font: Adobe Sans MM
       Actual Font Type : Type 1
    def
       Type:Type1
       Encoding:ANSI
       Actual Font: Adobe Sans MM
       Actual Font Type : Type 1
    uifont.ali entries
    [ PDF:Subset ]
    # This example shows how to subset Arial True Type font into the PDF file
    # Arial = "Arial.ttf"
    # The True Type font files must exist in any one of the folders specified in
    # REPORTS_PATH.
    abc= "abc.ttf"
    def="def.ttf"
    In Oracle reports builder, I am able see these fonts and select them in my report layout
    I am able to see the fonts in Preview/screen output while running RDFs in my reports builder, but PDF output doesnt display these fonts
    Is there anything else which is required to do ? Do I need to restart the machine after environment variable is added ?

    In one PC were Report Builder is installed, we see "COURIER NEW - WESTERN" font and the RDF created / saved in that font works fine on server. I don't know if this helps!

  • Launching 10g Reports builder

    Dear Readers,
    I have trouble launching Oracle Reports builder. I installed it on a Win XP home edition PC. Probably not a good idea since XP Professional is required.
    Can anyone tell me if in fact the origin of my problem is with the XP version. I hate to spend a lot of money on a new license and find out the problem is something completely different.
    thanks in advance for any insight you can provide me with.

    Oracle says the following on Metalink (click on certify):
    "Windows XP has 2 editions/versions, Professional and Home. Oracle will ONLY certify on Professional."
    I have successfully installed Developer Suite on XP Professional.
    Regards,
    Martin Malmström

  • Using Sql Queries in OBIEE Reports

    Hi all,
    I need to use direct sql query in report function column.. How can I implement that.
    For example
    Our report name is /shared/Automotive/Vehicle Services/Most Serviced Vehicle Models
    we have to eliminate /shared/Automotive/Vehicle Services/ part from above report name.. I have done this in sql using the Query SUBSTR(COL,INSTR(COL,'/',1,4)+1).
    So kindly help how to implement above sql query in Obiee.. Urgent.
    Thanx in advance

    If "Report Name" is a column then you can simply create a custom formual and apply the substring logic to it to get at the single report name instead of the full path.
    Otherwise this logic can easily be accomplished within the RPD via a logic column expression.

  • How to create YTD and MTD reports using Sql Server 2008 r2 report builder 3.0

    Hi All,
    How can I create YTD report from the below data. please help me
    ProdA     ProdB     ProdC     Month     Year
    10       50        40          January      2012
    Data for full Year i.e. from Jan - December 2012
    50       90       100        January       2013
    Data for full Year i.e. from Jan - December 2013
    90       40         30        January        2014
    Data for full Year i.e. from Jan - Till Date 2014
    MercuryMan

    You can use a correlated subquery to calculate YTD in query behind. You can use APPLY operator for that
    so something like
    SELECT *
    FROM Table t1
    CROSS APPLY (SELECT SUM(ProdA) AS TotA,SM(prodB) AS TotB,SUM(prodC) AS TotC
    FROM Table
    WHERE Year = t.Year)t1
    And show TotA,TotB and TotC in the required total row
    Another method is to add required totals in SSRS by clicking on relevant group and choosing Add Total option
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • INNER JOIN PROBLEM IN Microsoft SQL Server 2008 R2 Report Builder 3.0

    SELECT
    ,maximo_tbl_matrectrans.ponum
    ,maximo_tbl_po.description AS [maximo_tbl_po description]
    ,maximo_tbl_matrectrans.polinenum
    ,maximo_tbl_matrectrans.itemnum
    ,maximo_tbl_item.description AS [maximo_tbl_item description]
    FROM
    maximo_tbl_matrectran
    INNER JOIN maximo_tbl_po
    ON maximo_tbl_matrectrans.ponum = maximo_tbl_po.ponum
    INNER JOIN maximo_tbl_item
    ON maximo_tbl_matrectrans.itemnum = maximo_tbl_item.itemnum
    can you advise below picture in itemnum in show one value more time
    ponum polinenum maximo_tbl_a_po_description itemnum maximo_tbl_a_item_description
    D33-1021425 5 ASL REORDER HAZMAT 91G8110000071 DRUM, PLASTIC
    D33-1021425 5 ASL REORDER HAZMAT 91G8110000071 DRUM, PLASTIC
    D33-1020817 2 ASL REPLENISHMENT, D 91G6685000371 THERMOSTAT
    D33-1020817 2 ASL REPLENISHMENT, D 91G6685000371 THERMOSTAT
    D33-1020817 2 ASL REPLENISHMENT, D 91G6685000371 THERMOSTAT
    D33-1021365 2 ASL - D33DFAC STOCK 91G3920000081 CART, BIG WHEEL
    D33-1021365 2 ASL - D33DFAC STOCK 91G3920000081 CART, BIG WHEEL
    D33-1021425 5 ASL REORDER HAZMAT 91G8110000071 DRUM, PLASTIC
    D33-1020817 1 ASL REPLENISHMENT, D 91G5330002011 SEAL, THERMOSTAT
    D33-1022346 2 ASL STOCK REORDER E 92G6145000998 CABLE, POWER,
    D33-1022346 2 ASL STOCK REORDER E 92G6145000998 CABLE, POWER,
    D33-1020817 1 ASL REPLENISHMENT, D 91G5330002011 SEAL, THERMOSTAT
    D33-1020817 1 ASL REPLENISHMENT, D 91G5330002011 SEAL, THERMOSTAT
    D33-1022346 2 ASL STOCK REORDER E 92G6145000998 CABLE, POWER,
    but original we need..
    ponum polinenum maximo_tbl_a_po_description itemnum maximo_tbl_a_item_description
    D33-1021425 5 ASL REORDER HAZMAT 91G8110000071 DRUM, PLASTIC
    D33-1020817 2 ASL REPLENISHMENT, D 91G6685000371 THERMOSTAT
    D33-1021365 2 ASL - D33DFAC STOCK 91G3920000081 CART, BIG WHEEL
    D33-1020817 1 ASL REPLENISHMENT, D 91G5330002011 SEAL, THERMOSTAT
    D33-1022346 2 ASL STOCK REORDER E 92G6145000998 CABLE, POWER,

    Try below:
    SELECT DISTINCT
    maximo_tbl_matrectrans.ponum
    ,maximo_tbl_po.description AS [maximo_tbl_po description]
    ,maximo_tbl_matrectrans.polinenum
    ,maximo_tbl_matrectrans.itemnum
    ,maximo_tbl_item.description AS [maximo_tbl_item description]
    FROM
    maximo_tbl_matrectran
    INNER JOIN maximo_tbl_po
    ON maximo_tbl_matrectrans.ponum = maximo_tbl_po.ponum
    INNER JOIN maximo_tbl_item
    ON maximo_tbl_matrectrans.itemnum = maximo_tbl_item.itemnum
    -Vaibhav Chaudhari

  • Official link to download sql*plus (linux)  for 10g  database

    Good Morning to all ;
    Can anyone provide official link to download sql*plus for 10g database ?
    I am using Virtual machine version 7. I want to configure SQL*Plus utility in my virtual machine ..
    Please provide any official link or torrent link. It's for our learning purpose.
    Thanks in advance ..
    OS : REDHAT5, OEL 5
    VMWARE : Version 7
    Product : 10g R2

    Hello ;
    I can't be enable SQL* Plus in my VMWARE.
    *$ unzip instantclient-sqlplus-linuxppc32-10.2.0.1-20051121.zip*
    Archive: instantclient-sqlplus-linuxppc32-10.2.0.1-20051121.zip
    inflating: instantclient_10_2/glogin.sql
    inflating: instantclient_10_2/libsqlplus.so
    inflating: instantclient_10_2/libsqlplusic.so
    inflating: instantclient_10_2/sqlplus
    *[oracle@rhel5 SHARE]$ cd instantclient_10_2/*
    [oracle@rhel5 instantclient_10_2]$ ls -l
    total 1135
    -r-xr-xr-x 1 root root 1525 Nov 12 2005 glogin.sql
    -rwxrwxrwx 1 root root 1445591 Nov 12 2005 libsqlplusic.so
    -rwxrwxrwx 1 root root 857299 Nov 12 2005 libsqlplus.so
    -rwxrwxrwx 1 root root 18391 Nov 12 2005 sqlplus
    *./sqlplus*
    bash: ./sqlplus: cannot execute binary file
    Please provide me the steps to continue ..

Maybe you are looking for