Links for ABAP and JAVA Admin + Troubleshooting

Hi Gurus,
Can anyone send me the useful links for Admin + Troubleshooting in SAP BASIS i.e. ABAP and JAVA ?
Also, which are the Routing Maintenance Tasks in SAP BASIS ?
Any / All help is most welcome and would be rewarded with suitable points.
Many Thanks in Advance ,
Regards,
- Ishan

Hello Balaji,
Yes, you can connect the JAVA user adminsitration with the Single CUA.
Make use of the JAVA UME feature for this.
http://help.sap.com/saphelp_nw04/helpdata/en/49/9dd53f779c4e21e10000000a1550b0/content.htm
Regards,
Ammey Kesarkar

Similar Messages

Time out parameters for ABAP and JAVA instance

Hello All,
We are looking for Time out parameters for our ABAP and JAVA instances.
As users are complaining that they are getting time out error
while they are trying to access Cprojects from Portal.
I was able to check/collect the ABAP instance parameters from SMICM Tcode.
Can anybody tell me which parameters we need to look for JAVA instance.
Thanks in advance.
Regards,
Amber S

jstart/shutdownTimeout
(jstartup/shutdown_timeout)
Specifies the shutdown timeout, i.e. the grace period for the AS Java instance to shut down before the Java process terminates itself. Unt is in Seconds. Default is 120
j2ee/ms/connectTimeout
(jstartup/wait_for_scs)
Specifies the timeout for the first connection to the message server. The AS Java instance fails to start if this timeout expires.Unt is in Seconds.Default is 60
j2ee/ms/reconnectTimeout
(jstartup/wait_for_reconnect)
Specifies the timeout for the reconnecting to the message server.The AS Java instance shuts down when this timeout expires.Unt is inSeconds.Default is 3600 (one hour)
Thanks

Individual business system for ABAP and Java Stack

Hi All,
I need to send message from a system to XI via ABAP proxy and Java proxy. The sender's ABAP and Java proxy use the same message interface to communicate with XI. Should I create one business system for the ABAP stack and one for Java stack of the sender system?
Thanks + Best Regards
Jerome

Are you sending same message type from ABAP proxy and Java Proxy to XI?
If you have ABAP proxy, why do you need Java Proxy? Actually you cannot create any Java proxies on ABAP bases systems. What kind of system sender is? Java proxies are created for pure Java based applications.
Let me know if I didnt understand your question correctly. If so, please explain in detail why you need both proxies and what is your sender application.
--Archana

CUA for ABAP and JAVA Systems

i have a AS-ABAP System and AS-JAVA system.
Can i have a single CUA for AS-ABAP system and aS-JAVA system or i should have seperate CUA for ABAP and JAVA

Hello Balaji,
Yes, you can connect the JAVA user adminsitration with the Single CUA.
Make use of the JAVA UME feature for this.
http://help.sap.com/saphelp_nw04/helpdata/en/49/9dd53f779c4e21e10000000a1550b0/content.htm
Regards,
Ammey Kesarkar

Can we have same system Id for ABAP and JAVA in CRM 7.0 ?

Hi,
After installing CRM 7.0 ABAP, I want to install CRM7.0 Java using same system id as of ABAP. Is it possible ?
Regards,
Vivek Gaur

Well I found the solution for it. It looks more of a bug in sapinst that it doesn't allow to change userid !
All you need is to to create users ora<sid> and <sid>adm before running it and assign the required groups to them and it would work fine
Thanks Markus for you keen interest in my issue
Regards,
Vivek Gaur

WebDynpro for ABAP Vs Java

Hi all,
I have recently started learning Web Dynpro for ABAP.
I have worked in WebDynpro for Java.
1)I wanted to understand pros and cons of WebDynpro for ABAP and Java.
2)What are the functionality that are available in Web Dynpro for Java but not in Web Dynpro for ABAP.
3)What should be preferred when considering performance issues - WD for ABAP of Java?
Any Web Log or Link in this context will be helpful.
Thanks a lot,
Rashmi

Hi,
OOPs ABAP uses Classes and Interfaces which uses Methods and events.
If you have Java skills it is advantage for you.
There are Local classes as well as Global Classes.
Local classes we can work in SE38 straight away.
But mostly it is better to use the Global classes.
Global Classes or Interfaces are to be created in SE24.
SAP already given some predefined classes and Interfaces.
This OOPS concepts very useful for writing BADI's also.
So first create a class in SE 24.
Define attributes, Methods for that class.
Define parameters for that Method.
You can define event handlers also to handle the messages.
After creation in each method write the code.
Methods are similar to ABAP PERFORM -FORM statements.
After the creation of CLass and methods come to SE38 and create the program.
In the program create a object type ref to that class and with the help of that Object call the methods of that Class and display the data.
see the links below, Understand them and start developing.
chk out the links below:
General Tutorial for OOPS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
Have a look at these links for OO ABAP.
http://www.sapgenie.com/abap/OO/
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
SDN Series:
https://www.sdn.sap.com/irj/sdn/developerareas/abap?rid=/webcontent/uuid/35eaef9c-0b01-0010-dd8b-e3b0f9ed7ccb [original link is broken]
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf
Basic concepts of OOPS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b6cae890-0201-0010-ef8b-f970a9c41d47
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1591ec90-0201-0010-3ba8-cdcd500b17cf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20display%20data%20in%20alv%20grid%20using%20object%20oriented%20programming.doc
http://www.henrikfrank.dk/abapuk.html
http://www.erpgenie.com/abap/OO/
OOPS in ABAP
oops consept in abap
ABAP with OOPS
http://www.abap4.it/download/ALV.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
http://www.erpgenie.com/abap/controls/alvgrid.htm
OOPS with ABAP
https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action&pageid=37566
/people/rich.heilman2/blog/2005/07/27/dynamic-internal-tables-and-structures--abap
http://www.sapgenie.com/abap/OO/
Regards
Srinivas.K
Message was edited by:
Armin Reichert

WebDispatcher on ABAP and JAVA on serperate Servers

Hi all,
i read a lot of hours trough post concerning issues about web dispatcher, but i didn't find anything that suits my problem.
We have a MSCS-Cluster. One Node has the db which is for ABAP and JAVA (different schemas).
Than we have an SCS for ABAP and one for JAVA.
So the ABAP and JAVA-Instances are physically separated.
Now we want to use a web dispatcher to pass the requests to the right destination.
But i am not sure how to set it up. Do we need 2 dispatcher, or can one handle the requests. How does the dispatcher knows, where to redirect the requests ?
Is that done with the parameter icm/HTTP/redirect_<xx> ?
in hope of any advise to this problem
yours
BjoernTrabes

So, i tested around a little bit.
i am not clear with the function of the dispatcher.
When i bind the ABAP Dispatcher, than all requests to /sap/ are handled by the ABAP-Stack an are working, but when i browse to an Adress like /irj/portal/ the dispatcher says that the Adress is noch reachable.
When i bind the dispatcher to the Java-Stack, than all Java-Adresses work, but the /sap/ not, which is the ABAP Stack.
so, i don't know exactly where my fault is.
How knows the Dispatcher, where the ABAP or JAVA-Stack is.
On an other Machine where the java is an add-in, it works quite well, but on this server the abap and Java Servers are physically separated.
greets
Bjoern
Edited by: Björn Trabes on May 18, 2009 10:59 AM

ABAP and Java mapping

Wanted to confirm my understaing for ABAP and JAVA mapping.
Am I correct in my assumption that these mapping techniques can be used only if input and ouput is in XML format ?
So if XI is receiving a flat comma separated text/non-XML file or an IDOC for that matter and output is NOT in XML format, say again flat text file or IDOC, I cannot use above two techniques?
All the docs I have read suggest that 'Execute' method is called when XML file/data is received, paresed using DOM/SAX/JAXB (for Java mapping) or IXML lib (for ABAP mapping) and then create a output XML file.
-Thanks in advance

Hi Bob,
Here you have a code sample for deescaping. I have have written this code a couple of time ago. The incoming file can be any text format. It might be XML, but not necessarily.
The main method is not reqired, but good for testing.
Regards
Stefan
* Created on 28.09.2005
* To change the template for this generated file go to
* Window>Preferences>Java>Code Generation>Code and Comments
package sample;
import com.sap.aii.mapping.api.*;
import java.io.*;
import java.util.Map;
public class Deescaping implements StreamTransformation{
          public static void main (String[] args) {
               try {
                    InputStream in = new FileInputStream(new File("in.xml"));
                    OutputStream out = new FileOutputStream(new File("out.xml"));
                    Deescaping change = new Deescaping();
                    change.execute(in, out);
               } catch (Exception e) {
                    e.printStackTrace();
          public void setParameter (Map map) {
          public void execute (InputStream in, OutputStream out)
               throws StreamTransformationException {
               try {
                    int c;
                    while ((c = in.read()) != -1) {
                         if (c != '&') {
                              out.write(c);
                         } else {
                              // ampersand
                              String help = "&";
                              boolean exit = false;
                              // check the next 5 chars, if there is a ';'
                              for (int i = 0; i < 5 && !exit; i++) {
                                   c = in.read();
                                   if (c == -1) {
                                        exit = true;
                                   } else {
                                        // another ampersand?
                                        if (c == '&') {
                                             out.write(help.getBytes());
                                             help = "&";
                                             i = 0; // check the next 5 chars
                                        } else {
                                             help = help + (char) c;
                                             if (c == ';') {
                                                  exit = true;
                                             if (help.equals("&")) {
                                                  help = "&";
                                             if (help.equals("<")) {
                                                  help = "<";
                                             if (help.equals(">")) {
                                                  help = ">";
                                             if (help.equals(""")) {
                                                  help = """;
                                             if (help.equals("'")) {
                                                  help = "'";
                              } // for
                              out.write(help.getBytes());
                    } // while
                    out.flush();
               } catch (Exception e) {
                    throw new StreamTransformationException(e.getMessage(),e);

Possibilities Web Dynpro for ABAP versus JAVA

Hello,
I would like to know whether WebDynpro for ABAP and Java have the same options, abilities and possibilities. e'm I able to produce the same results with WebDynpro for ABAP as Java. I would like to standardize on just one of the two and be sure that it will to limit me later.
Thanks in advance.

Hi Maurice,
If you make have to make a choice you have to consider the followings:
- Which release do you have? Java version is available since 6.30/6.40, the ABAP only as of 7.00.
- Performance. If you have your WD4ABAP and backend (eg ERP) in the same system you gain a lot of performance
- Other small difference, that Java version has a much nicer graphical editor, which I miss from the ABAP version
These are, which came to my mind.
Best regards,
Peter

Upgrade of CRM 5.0 abap and java

Hi,
I have to upgrade CRM 5.0 to CRM 7.0 with EhP1. In my system landscape, CRM 5.0 ABAP (CRA) and CRM 5.0 Java (CRJ) are installed on different servers. CRJ is a portal available for end user for which CRA is acting as backend server and database. I have experienced that when we install CRM 7.0, installer automatically creates 2 seperate instances each for abap and java. I am not able to presume what exactly will happen in this kind of upgrade. My doubts are:
1. Will this upgrade CRA (abap) and CRJ (java) seperately on different server? and i connect them as i am doing currently (CRA being the UME for CRJ)?
2. While upgrading CRA, upgrade tool will ask the path of CRJ and both the instance will be upgraded simultaneously. And CRJ will behave as web ui instance after upgrade.
3. CRA will be upgraded and a new instance for WebUI will be created (let us call it CRW) and i will connect CRW with CRJ for all practical purposes? where CRJ will act as portal for CRW.
Kindly help.
Thanks.
- gaurav

Hi,
> 1. Will this upgrade CRA (abap) and CRJ (java) seperately on different server? and i connect them as i am doing currently (CRA being the UME for CRJ)?
Yes. You need to upgrade both the servers separately. You need not to reconnect it as both the systems are already connected with each other.
> 2. While upgrading CRA, upgrade tool will ask the path of CRJ and both the instance will be upgraded simultaneously. And CRJ will behave as web ui instance after upgrade.
> 3. CRA will be upgraded and a new instance for WebUI will be created (let us call it CRW) and i will connect CRW with CRJ for all practical purposes? where CRJ will act as portal for CRW.
>
No, new instance will be created. You need to upgrade CRA and CRJ separately. WEBUI will be automatically upgraded.
Thanks
Sunny

How to find SAP java realted roles for ABAP and Basis

Hi Gurus,
I am new in SAP Security First week, I got the assignment to find the SAP Roles and Trans for ABAP and Basis in all Systems like Ecc, BI, ......
I use SE16 ->AGR_TCODES then SAP* in Table Name it give me all SAP Roles and Trans.
Pls help me to get only SAP Java and Basis roles and Trans Seperately
Thanks

Hi,
Are you speaking about the standrad SAP roles? If yes, you can have a look at BC and ABAP roles. However, if your question is about the created roles, you should see the convention that was followed in your organization to identify the roles.
Rgds,
Raghu Boddu

New Server for Preview SAP WAS ABAP and Java

Hi
I wish to purchase a new PC or server to specifically house my ABAP and Java preview installations rather than have them running on an old PC and laptop.
Anyone out there got some recommended configurations? Max spend will be £1500.
Cheers
Ian

Ian,
Personally I wouldn't be happy running a server 24/7 at home but would want to just switch it on and the server start so would be looking to have some sort of script to run the relevant WAS instances automatically on startup.
160Gb hard drives would be ample. Could consider increasing the storage and then the system could double up as a backup device as well as a SAP server.
I've built systems in the past and that's the approach I'd take for this too. I don't mind buying pre-built systems but I
detest all the rubbish software they bundle with them. If you build it yourself you can install just Windows and it'll run like a dream.
This bundle looks interesting:
http://www.overclockers.co.uk/showproduct.php?prodid=BU-039-OK
The motherboard takes four memory modules so the 2Gb would consume two of these allowing for upgrades in the future if deemed necessary. Add in a couple of HD's, a DVD-RW, a cheap gfx card and a case and you'd easily get change from £800. Could spend a bit more to get more silent components too.
Now I've had a look around and priced them up I'm even more tempted!!!
Cheers,
JB

ABAP and JAVA sync issue

Hello,
We are having MI 7.0 at SPS15.Am trying to apply add to our system(we created SDA file from NWA as an addon).SDA addon getting deployed but its not getting sync between ABAP and Java stack even if is run reload sever time from NWA->Administrator->Mobile Infrastructure->Mobile Components.I can see add-on when i check from SDM but it cannot see when i search under Mobile component in NWA.Application logs shows below error.
#703543993#/Applications                                                                                #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---:                                                                                Processfunction#J2EE_GUEST#0##n/a##8e6d577024d511e1a299001635730592#SAPEngine_Ap                                                                                plication_Thread[impl:3]_10##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe                                                                                an#Plain####
#1.#001635730592001800000015000030100004B3E6C1311ED1#1323703575929#/Applications                                                                                #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---:                                                                                Processfunction#J2EE_GUEST#0##n/a##a19424a024d511e18ede001635730592#SAPEngine_Ap                                                                                plication_Thread[impl:3]_9##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBea                                                                                n#Plain####
#1.#001635730592000F00000016000030100004B3E6C662CEBE#1323703663073#/Applications                                                                                #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---:                                                                                Processfunction#J2EE_ADMIN#47##n/a##d588777024d511e1c64a001635730592#SAPEngine_A                                                                                pplication_Thread[impl:3]_18##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerB                                                                                ean#Plain####
#1.#001635730592002000000015000030100004B3E6CDC2D7E4#1323703786809#/Applications                                                                                #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---:                                                                                Processfunction#J2EE_GUEST#0##n/a##1f482a9024d611e18dc1001635730592#SAPEngine_Ap                                                                                plication_Thread[impl:3]_29##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe                                                                                an#Plain####
#1.#00163573059200260000000C000030100004B3E6D02A2DDA#1323703827137#/Applications                                                                                #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---:                                                                                Processfunction#J2EE_GUEST#0##n/a##37527e6024d611e1a43c001635730592#SAPEngine_Ap                                                                                plication_Thread[impl:3]_39##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe                                                                                an#Plain####
#1.#00163573059200350000000B000030100004B3E6D1150767#1323703842528#/Applications                                                                                #sap.com/tcwddispwda#com.sap.ip.mi.admin.wd.paramset.Details.Method-->wdDoModi                                                                                fyView()#J2EE_ADMIN#56##uwsvt729.merck.com_VZ1_12609950#J2EE_ADMIN#2e05832024d61                                                                                1e1b753001635730592#SAPEngine_Application_Thread[impl:3]_33##0#0#Error#1#com.sap                                                                                .ip.mi.admin.wd.paramset.Details#Plain###Specify all parameters#
#1.#00163573059200250000007C000030100004B3E6F8460AEE#1323704500063#/Applications                                                                                #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---:                                                                                Processfunction#J2EE_GUEST#0##n/a##c86ab33024d711e185b5001635730592#SAPEngine_Ap                                                                                plication_Thread[impl:3]_22##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe                                                                                an#Plain####
#1.#001635730592002F00000015000030100004B3E728C1AF02#1323705313486#/Applications                                                                                #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---:                                                                                Processfunction#J2EE_GUEST#0##n/a##ad1da59024d911e1a138001635730592#SAPEngine_Ap                                                                                plication_Thread[impl:3]_37##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe                                                                                an#Plain####
#1.#001635730592000F0000000000002A400004B3E754A629F8#1323706045836#/Applications                                                                                /CMS/PCS#sap.com/tcSLCMS~PCS#com.sap.cms.pcs.serverAPI.CmsOrganizerAdapter#J2E                                                                                E_GUEST#0##n/a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[im                                                                                pl:3]_26##0#0#Info#1#com.sap.cms.pcs.serverAPI.CmsOrganizerAdapter#Plain###CMS o                                                                                rganizer proxy is waiting for requests#
#1.#001635730592000F0000000100002A400004B3E754A659EE#1323706045848#/Applications                                                                                /CMS/PCS#sap.com/tcSLCMS~PCS#com.sap.cms.pcs.serverAPI.CmsManagerAdapter#J2EE_                                                                                GUEST#0##n/a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[impl                                                                                :3]_26##0#0#Info#1#com.sap.cms.pcs.serverAPI.CmsManagerAdapter#Plain###CMS manag                                                                                er proxy is waiting for requests#
#1.#001635730592000F0000000200002A400004B3E754A6715D#1323706045854#/Applications                                                                                /CMS/PCS#sap.com/tcSLCMS~PCS#com.sap.cms.pcs.transport.proxy.CmsLogViewer#J2EE                                                                                GUEST#0##n/a##61feecc024db11e1b4cb001635730592#SAPEngineApplication_Thread[imp                                                                                l:3]_26##0#0#Info#1#com.sap.cms.pcs.transport.proxy.CmsLogViewer#Plain###CMS Log                                                                                Viewer is waiting for requests#
#1.#001635730592000F0000000300002A400004B3E754A67B77#1323706045857#/Applications                                                                                /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.RecoveryServlet#J2EE_GUEST#0##n/                                                                                a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0                                                                                #Info#1#com.sap.cms.recovery.RecoveryServlet#Plain###CMS recovery servlet is wai                                                                                ting for requests#
#1.#001635730592000F0000000400002A400004B3E754A67CE5#1323706045857#/Applications                                                                                /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.RecoveryServlet#J2EE_GUEST#0##n/                                                                                a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0                                                                                #Info#1#com.sap.cms.recovery.RecoveryServlet#Plain###start recovery#
#1.#001635730592000F0000000500002A400004B3E754AA7F91#1323706046120#/Applications                                                                                /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.pcs.QueueItemRecovery#J2EE_GUEST                                                                                #0#SAP J2EE Engine JTA Transaction : [0ffffffc069ffffff9e0008]#n/a##61feecc024db                                                                                11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0#Info#1#com.sap                                                                                .cms.recovery.pcs.QueueItemRecovery#Plain###CMS recovery found 0 QueueItem(s) wi                                                                                th state Import running in 0 queue(s). Start check if they are really running or                                                                                need recovery.#
#1.#001635730592000F0000000600002A400004B3E754AA8344#1323706046121#/Applications                                                                                /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.pcs.QueueItemRecovery#J2EE_GUEST                                                                                #0#SAP J2EE Engine JTA Transaction : [0ffffffc069ffffff9e0008]#n/a##61feecc024db                                                                                11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0#Info#1#com.sap                                                                                .cms.recovery.pcs.QueueItemRecovery#Plain###Finished check and recovery for all                                                                                CMS QueueItems of state Import running. Checked Items: 0; Recovered Items: 0; Re                                                                                covery Failed Items: 0; Real running Items: 0#
#1.#001635730592000F0000000700002A400004B3E754AAACBA#1323706046132#/Applications                                                                                /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.pcs.QueueItemRecovery#J2EE_GUEST                                                                                #0#SAP J2EE Engine JTA Transaction : [0ffffffc069ffffff9e0008]#n/a##61feecc024db                                                                                11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0#Info#1#com.sap                                                                                .cms.recovery.pcs.QueueItemRecovery#Plain###CMS recovery found 0 QueueItem(s) wi                                                                                th state Assembly running in 0 queue(s). Start check if they are really running                                                                                or need recovery.#
#1.#001635730592000F0000000800002A400004B3E754AAAEE5#1323706046132#/Applications                                                                                /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.pcs.QueueItemRecovery#J2EE_GUEST                                                                                #0#SAP J2EE Engine JTA Transaction : [0ffffffc069ffffff9e0008]#n/a##61feecc024db                                                                                11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0#Info#1#com.sap                                                                                .cms.recovery.pcs.QueueItemRecovery#Plain###Finished check and recovery for all                                                                                CMS QueueItems of state Assembly running. Checked Items: 0; Recovered Items: 0;                                                                                Recovery Failed Items: 0; Real running Items: 0#
#1.#001635730592000F0000000900002A400004B3E754AAB68F#1323706046134#/Applications                                                                                /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.RecoveryServlet#J2EE_GUEST#0##n/                                                                                a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0                                                                                #Info#1#com.sap.cms.recovery.RecoveryServlet#Plain###finished recovery#
#1.#00163573059200140000000300002A400004B3E7AA40154F#1323707482010#/Applications                                                                                #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---:                                                                                Processfunction#J2EE_GUEST#0##n/a##b9c439d024de11e1a4ee001635730592#SAPEngine_Ap                                                                                plication_Thread[impl:3]_10##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe                                                                                an#Plain####
Thanks

Hi,
Tha ABAP stack consists of the Integration Server which in turn contains your Integration Engine and Business Process Engine.
The J2EE stack contains the Adapter Engine and your IR and ID run on the J2EE engine.
Ever wondered how and where the XI pipeline gets executed? It happens in the ABAP stack.
All messsages picked by the Adapter Framework running on the J2EE engine are passed to the Integration Engine, which does the routing. The mapping program again gets executed on the Java stack and the rest of the pipeline servies are executed again on the ABAP stack and so on.
Take a look at the XI overview doc to understand this better,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a3d3c390-0201-0010-c490-bd85917138c8
Regards,
Bhavesh

Abap and java refresh

Hi friends,
If anybody knows how to refresh an abap and java systems (not abap+java addin)
can you please send the docs?
Thanks.

Hi,
Plz check this link for ABAP refresh.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/fb/35c62bc12711d4b2e80050dadfb92b/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/fb/35c62bc12711d4b2e80050dadfb92b/content.htm</a>
Regards,
Subhasha Ranjan

Information about Integration WebDynpro for ABAP and Business-Workflow

Hi Experts,
I'm looking for information about
Integration WebDynpro for ABAP and Business-Workflow
Link, documents and books are welcome!
Thanks
mishak

If you have worked on workflows earlier the procedure is very simple. You just need to enter certain parameter values of your application in SWFVISU for the respective task and re-register your system in UWL administration. Thats it! your webdynpro and workflows are integrated. For details on the parameters check the following link,
http://help.sap.com/saphelp_nw04/helpdata/en/19/bff5c18ba44da4a4ca68cf572dabda/frameset.htm
There are also a couple of blogs on "launching webdynpro from UWL" (Procedure for both Java and webdynpro is almost similar). You can also check these for more details.
Thanks,
Prasath N

Links for ABAP and JAVA Admin + Troubleshooting

Similar Messages

Maybe you are looking for