Linsys WTR160N v3 can't acces web utility
I had disable the web utility acces via wireless in my router, because my neighboor hacked the system, but I did it from a wilreless computer, now I can' acces my administrator page conected with the ethernet cable to the router, I need to change my password, but every time I put the IP address 192.168.1.1., the browser time session expired. So i restar all the system?
Remote access setup is for outside your private lan, not inside i.e., access your router from your place of work a billion miles away. This is normally disabled anyway in all routers by default.
Hare reset the router and reconfigure it. Add strong security as this is the only way your neighbor could have got on, and I doubt it if you had security set anyway.
Similar Messages
-
[solved] pacman can't acces repositories, but my web browser does
Hi,
there is a strange problem. Today I tried a pacman -Syu to update, but pacman can't acces my repositories. Gives me errors of
error: failed retrieving file 'core.db' from mirror.archlinux.ro : No address record
I tried different mirrors, change the protocol from ftp to http, but without result. The strange think is that I can access those repositories with my web browser, so I think that it is pacman or python problem.
My last entries in pacman's log are
[2011-04-09 15:51] Running 'pacman -Syu'
[2011-04-09 15:51] synchronizing package lists
[2011-04-09 15:51] starting full system upgrade
[2011-04-09 15:52] upgraded audacious-plugins (2.4.4-2 -> 2.4.4-3)
[2011-04-09 15:52] upgraded libgpg-error (1.9-2 -> 1.9-3)
[2011-04-09 15:52] upgraded libgcrypt (1.4.6-1 -> 1.4.6-2)
[2011-04-09 15:52] upgraded gnutls (2.10.5-1 -> 2.12.2-1)
[2011-04-09 15:52] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
[2011-04-09 15:52] upgraded kdebase-workspace (4.6.2-1 -> 4.6.2-2)
[2011-04-09 15:52] upgraded xproto (7.0.20-1 -> 7.0.21-1)
[2011-04-09 15:52] upgraded libx11 (1.4.3-1 -> 1.4.3-2)
[2011-04-09 15:52] upgraded pycups (1.9.54-1 -> 1.9.55-1)
[2011-04-09 15:52] upgraded taglib (1.6.3-1 -> 1.7-1)
[2011-04-09 15:52] upgraded xdg-utils (1.1.0rc1-1 -> 1.1.0rc1-2)
[2011-04-09 15:52] upgraded xextproto (7.1.2-1 -> 7.2.0-1)
[2011-04-09 16:16] Running 'pacman -S k3b'
[2011-04-09 16:17] installed libdiscid (0.2.2-1)
[2011-04-09 16:17] installed libmusicbrainz3 (3.0.3-1)
[2011-04-09 16:17] installed kdemultimedia-kioslave (4.6.2-1)
[2011-04-09 16:17] installed openjpeg (1.3-3)
[2011-04-09 16:17] installed ffmpeg (20110330-1)
[2011-04-09 16:17] installed libao (1.1.0-1)
[2011-04-09 16:17] installed cdrdao (1.2.3-5)
[2011-04-09 16:17] installed cdrkit (1.1.11-1)
[2011-04-09 16:17] installed k3b (2.0.2-1)
[2011-04-09 16:17] Running 'pacman -S dvd+rw-tools'
[2011-04-09 16:20] installed dvd+rw-tools (7.1-2)
After this, it stopped working - I mean I can't download a thing with pacman, no updates, no packages.
Last edited by inp3dance (2011-05-04 22:37:00)pacman -Syu --debug output:
debug: config: attempting to read file /etc/pacman.conf
debug: config: new section 'options'
debug: config: HoldPkg: pacman
debug: config: HoldPkg: glibc
debug: config: SyncFirst: pacman
debug: config: Architecture: i686
debug: config: new section 'core'
debug: registering sync database 'core'
debug: config file /etc/pacman.conf, line 65: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server URL to database 'core': http://mirror.archlinux.ro/archlinux/core/os/i686
debug: setlibpaths() called
debug: option 'cachedir' = /var/cache/pacman/pkg/
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'extra'
debug: registering sync database 'extra'
debug: config file /etc/pacman.conf, line 68: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server URL to database 'extra': http://mirror.archlinux.ro/archlinux/extra/os/i686
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'community'
debug: registering sync database 'community'
debug: config file /etc/pacman.conf, line 74: including /etc/pacman.d/mirrorlist
debug: config: attempting to read file /etc/pacman.d/mirrorlist
debug: adding new server URL to database 'community': http://mirror.archlinux.ro/archlinux/community/os/i686
debug: config: finished parsing /etc/pacman.d/mirrorlist
debug: config: new section 'archlinuxfr'
debug: registering sync database 'archlinuxfr'
debug: adding new server URL to database 'archlinuxfr': http://repo.archlinux.fr/i686
debug: config: finished parsing /etc/pacman.conf
:: Synchronizing package databases...
debug: database path for tree local set to /var/lib/pacman/local/
debug: local database version 2
debug: destfile found, using mtime only
debug: using 'core.db' for download progress
debug: HTTP_PROXY: (null)
debug: http_proxy: (null)
debug: FTP_PROXY: (null)
debug: ftp_proxy: (null)
error: failed retrieving file 'core.db' from mirror.archlinux.ro : No address record
debug: failed to sync db: No address record
error: failed to update core (No address record)
debug: destfile found, using mtime only
debug: using 'extra.db' for download progress
debug: HTTP_PROXY: (null)
debug: http_proxy: (null)
debug: FTP_PROXY: (null)
debug: ftp_proxy: (null)
error: failed retrieving file 'extra.db' from mirror.archlinux.ro : No address record
debug: failed to sync db: No address record
error: failed to update extra (No address record)
debug: destfile found, using mtime only
debug: using 'community.db' for download progress
debug: HTTP_PROXY: (null)
debug: http_proxy: (null)
debug: FTP_PROXY: (null)
debug: ftp_proxy: (null)
error: failed retrieving file 'community.db' from mirror.archlinux.ro : No address record
debug: failed to sync db: No address record
error: failed to update community (No address record)
debug: destfile found, using mtime only
debug: using 'archlinuxfr.db' for download progress
debug: HTTP_PROXY: (null)
debug: http_proxy: (null)
debug: FTP_PROXY: (null)
debug: ftp_proxy: (null)
error: failed retrieving file 'archlinuxfr.db' from repo.archlinux.fr : No address record
debug: failed to sync db: No address record
error: failed to update archlinuxfr (No address record)
error: failed to synchronize any databases
debug: unregistering database 'local'
debug: unregistering database 'core'
debug: unregistering database 'extra'
debug: unregistering database 'community'
debug: unregistering database 'archlinuxfr'
pacman.conf
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
HoldPkg = pacman glibc
# If upgrades are available for these packages they will be asked for first
SyncFirst = pacman
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#XferCommand = /usr/bin/curl -C - -f %u > %o
#CleanMethod = KeepInstalled
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options (all disabled by default)
#UseSyslog
#ShowSize
#UseDelta
#TotalDownload
#CheckSpace
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
#[testing]
#Include = /etc/pacman.d/mirrorlist
[core]
Include = /etc/pacman.d/mirrorlist
[extra]
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#Include = /etc/pacman.d/mirrorlist
[community]
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#Server = file:///home/custompkgs
[archlinuxfr]
Server = http://repo.archlinux.fr/$arch
My mirrorlist is the default one, I have enabled only one mirror at a time, be it the Hungarian one or one of the Romanian mirrors, depending in which country I am. -
Recently I update Firefox and now I can't acces to my router
Recently I update Firefox and now I can't acces to my router main page any more.
Before I get a window that ask me to add an exception, cause the certificate ... as I check the remember the exception it always ask me for the exception. was not so bad as I have ask any time for the exception and finally I have acces to it . But now NO WAY !!!
I still go to internet, all my computers are connected but I could'nt reach the router to change some settings and add news computers ( my settings are very secure on my router to add a device I have to enter the MAC address). I still get my printer at 192.168.3.141, the modem at 192.168.1.1 but when I want to go to the router main page 192.168.3.1, I get this message :
Secure Connection Failed
An error occurred during a connection to 192.168.3.1. Cannot communicate securely with peer: no common encryption algorithm(s). (Error code: ssl_error_no_cypher_overlap)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
I read that FF change some settings on the new versions and last time I enter on my router without problems was on October 10.
Now I have installed the 33.0.1 my OS Is XP.
PLEASE HELP WITH THAT ISSUE
EDIT: I suspect that my problem have to be with the certificate manager because I see it change a lot on this version, and have a place to add exception security like the old one that I use to have to check in the past.
it look like the same problem as me:
https://bugzilla.mozilla.org/show_bug.cgi?id=1042889
I don't understand almost nothing about certificates then I didn't find any tutorial explaining how to deal with. Also I sow that was totally diferent have some ssl things to check and now is a OCSP ??? for me all still chinesse (lol) I only want someting very simple: reach my router !!!.
I only see on authorities many times my router address, I try to add an exception and say the certificate couldn't be found. I don't know how to play with all this settings , but I'm shure have relation to my problem.
Sorry, my english it's not the best.[SOLVED)
@the-edmeister That work !!! thank you very much. I have to put it at SSLv3 option to this work.
I have a question for you. How I could figure out to work with that in the future? could I add an exception on the certificates? or something like that to still let me enter on my router web page? or how I could figure out to make any change on tomato router to still work with the new standard? . -
866VAE - cant acces web pages from LAN
Hi everyone,
im fighting with Cisco 866VAE-K9 for few days. I have got ADSL2+ line in Cisco, i can ping anything from router (like 8.8.8.8 or www.google.com), test of connection in CCP runs successfully, but i cant acces web pages from LAN computers. From LAN i can ping to any IP adress in internet (like 8.8.8.8), but i cant ping or access domain names of web pages (like www.google.com). I know there is probably something wrong in my config, but after 2 days of googling i cant find where the problem is. Can anybody help?
Here is my running config:
Building configuration...
Current configuration : 8181 bytes
! Last configuration change at 11:31:15 UTC Fri Mar 6 2015 by admin
version 15.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname cisco_866vae
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
enable secret 5 xx
enable password xx
aaa new-model
aaa authentication login default local
aaa authorization exec default local
aaa session-id common
wan mode dsl
ip port-map user-protocol--1 port tcp 3500
ip name-server 8.8.8.8
ip cef
no ipv6 cef
parameter-map type protocol-info yahoo-servers
server name scs.msg.yahoo.com
server name scsa.msg.yahoo.com
server name scsb.msg.yahoo.com
server name scsc.msg.yahoo.com
server name scsd.msg.yahoo.com
server name cs16.msg.dcn.yahoo.com
server name cs19.msg.dcn.yahoo.com
server name cs42.msg.dcn.yahoo.com
server name cs53.msg.dcn.yahoo.com
server name cs54.msg.dcn.yahoo.com
server name ads1.vip.scd.yahoo.com
server name radio1.launch.vip.dal.yahoo.com
server name in1.msg.vip.re2.yahoo.com
server name data1.my.vip.sc5.yahoo.com
server name address1.pim.vip.mud.yahoo.com
server name edit.messenger.yahoo.com
server name messenger.yahoo.com
server name http.pager.yahoo.com
server name privacy.yahoo.com
server name csa.yahoo.com
server name csb.yahoo.com
server name csc.yahoo.com
parameter-map type protocol-info msn-servers
server name messenger.hotmail.com
server name gateway.messenger.hotmail.com
server name webmessenger.msn.com
parameter-map type protocol-info aol-servers
server name login.oscar.aol.com
server name toc.oscar.aol.com
server name oam-d09a.blue.aol.com
crypto pki trustpoint TP-self-signed-2886901321
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2886901321
revocation-check none
rsakeypair TP-self-signed-2886901321
crypto pki certificate chain TP-self-signed-2886901321
certificate self-signed 01
controller VDSL 0
class-map type inspect match-any SDM_BOOTPC
match access-group name SDM_BOOTPC
class-map type inspect match-any ccp-cls-protocol-p2p
match protocol edonkey signature
match protocol gnutella signature
match protocol kazaa2 signature
match protocol fasttrack signature
match protocol bittorrent signature
class-map type inspect match-all ccp-cls--1
match access-group name all
class-map type inspect match-all ccp-cls--2
match access-group name all1
class-map type inspect match-any ccp-cls-protocol-im
match protocol ymsgr yahoo-servers
match protocol msnmsgr msn-servers
match protocol aol aol-servers
class-map type inspect match-any SDM_SSH
match access-group name SDM_SSH
class-map type inspect match-any SDM_HTTPS
match access-group name SDM_HTTPS
class-map type inspect match-all SDM_GRE
match access-group name SDM_GRE
class-map type inspect match-any SDM_SHELL
match access-group name SDM_SHELL
class-map type inspect match-any sdm-cls-access
match class-map SDM_HTTPS
match class-map SDM_SSH
match class-map SDM_SHELL
class-map type inspect match-all sdm-access
match class-map sdm-cls-access
match access-group 101
policy-map type inspect ccp-policy-ccp-cls--1
class type inspect ccp-cls--1
pass
class class-default
drop
policy-map type inspect ccp-policy-ccp-cls--2
class type inspect ccp-cls--2
pass
class class-default
drop
zone security out
zone security in
zone-pair security sdm-zp-in-out source in destination out
service-policy type inspect ccp-policy-ccp-cls--1
zone-pair security sdm-zp-out-in source out destination in
service-policy type inspect ccp-policy-ccp-cls--2
interface Loopback0
ip address 192.168.100.1 255.255.255.0
zone-member security in
interface ATM0
no ip address
no atm ilmi-keepalive
interface ATM0.1 point-to-point
pvc 8/48
oam-pvc manage
pppoe-client dial-pool-number 1
interface Ethernet0
description $ETH-WAN$
no ip address
shutdown
pppoe-client dial-pool-number 2
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface GigabitEthernet0
no ip address
interface GigabitEthernet1
description $ETH-WAN$$FW_OUTSIDE$
ip address dhcp client-id GigabitEthernet1
ip tcp adjust-mss 1412
shutdown
duplex auto
speed auto
interface Vlan1
description $FW_INSIDE$
ip address 192.168.7.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
zone-member security in
ip tcp adjust-mss 1412
interface Dialer1
no ip address
interface Dialer2
description $FW_OUTSIDE$
ip address negotiated
ip mtu 1452
ip nat outside
ip virtual-reassembly in
zone-member security out
encapsulation ppp
dialer pool 1
dialer-group 3
ppp authentication chap pap callin
ppp chap hostname o2
ppp chap password 0 o2
ppp pap sent-username o2 password 0 o2
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip nat source list 101 interface Dialer2 overload
ip nat inside source static tcp 192.168.7.39 3500 interface Dialer2 3500
ip nat inside source list 101 interface Dialer2 overload
ip nat inside source route-map MAP_ACL interface Dialer2 overload
ip route 0.0.0.0 0.0.0.0 Dialer2 permanent
ip route 192.168.2.0 255.255.255.0 192.168.7.3 permanent
ip access-list extended NAT_ACL
deny ip 192.168.0.0 0.0.0.255 192.168.0.0 0.0.255.255
permit ip 192.168.0.0 0.0.0.255 any
ip access-list extended SDM_BOOTPC
remark CCP_ACL Category=0
permit udp any any eq bootpc
ip access-list extended SDM_GRE
remark CCP_ACL Category=1
permit gre any any
ip access-list extended SDM_HTTPS
remark CCP_ACL Category=1
permit tcp any any eq 443
ip access-list extended SDM_SHELL
remark CCP_ACL Category=1
permit tcp any any eq cmd
ip access-list extended SDM_SSH
remark CCP_ACL Category=1
permit tcp any any eq 22
ip access-list extended all
remark CCP_ACL Category=128
permit ip any any
ip access-list extended all1
remark CCP_ACL Category=128
permit ip any any
access-list 2 remark CCP_ACL Category=2
access-list 2 permit 192.168.7.0 0.0.0.255
access-list 101 remark CCP_ACL Category=128
access-list 101 permit ip any any
access-list 101 permit udp any any eq domain
access-list 101 permit udp any eq domain any
dialer-list 1 protocol ip permit
dialer-list 2 protocol ip permit
dialer-list 3 protocol ip permit
mac-address-table aging-time 15
route-map MAP_ACL permit 10
line con 0
no modem enable
line aux 0
line vty 0 4
exec-timeout 40 0
password xxxxxxx
transport input telnet ssh
transport output telnet ssh
scheduler allocate 60000 1000
endHi,
I would be happy to help but I have one question first: Your configuration contains a lot of cruft generated from SDM/CCP and I am not sure if any of that is really required by you. Do you believe you would be fine with having this entire configuration trimmed down and do just what's supposed to do (routing and NAT), and we had security measures added in later? Just by the way, I do not believe you need the zone-based firewall. In your simple setup with just a few inside/outside interfaces, it does not add any real value apart from making the configuration virtually unreadable. We can easily do the same with IP Inspect.
Best regards,
Peter -
Web Util & Report integration to gather.
Hello all
I have configured webutil and report integration in Developer suite 9i.
and it is working very fine.
now I am upgrading it to 10g.
I have configured web util and it is working fine.
and now I am getting problem to integration for "reports" as follows.
FRM-41213 Unable connect to the report server cyan.
I have developed one form for testing the report integration with form.
but when i am running this form with default configuration of formsweb.cfg then
it is working fine as follows.
http://chirag:8889/forms90/f90servlet?form=c:\temp\chirag&userid=cyan/cyan@cyan
when i am running this form using web util configuration then i am getting
the abouve error.
http://chirag:8889/forms90/f90servlet?config=cyan
but my application in Ds9i have used both webutil and report integration
so i have to find out the same thing in DS 10g.
Following are the code of report integration.
DECLARE
mreport_other varchar2(4000);
BEGIN
set_report_object_property('CYAN',REPORT_DESFORMAT,:CONTROL_BLK.REPORT_DESFORMAT);
mreport_other := 'p_report_title="'||:control_blk.report_title||'" ';
mreport_other := 'p_user_name="'||'CHIRAG'||'" '||mreport_other;
DECLARE
report_status varchar2(30);
rep_id REPORT_OBJECT;
v_rep varchar2(100);
mreport_file varchar2(200) := 'C:\CYAN'||:control_blk.report_path;
BEGIN
rep_id := FIND_REPORT_OBJECT('cyan');
SET_REPORT_OBJECT_PROPERTY(rep_id,REPORT_SERVER,'cyan');
SET_REPORT_OBJECT_PROPERTY(rep_id,REPORT_FILENAME,mreport_file);
SET_REPORT_OBJECT_PROPERTY(rep_id,REPORT_OTHER,mreport_other);
v_rep := RUN_REPORT_OBJECT(rep_id);
report_status := report_object_status(v_rep);
if Report_Status = 'FINISHED' then
WEB.SHOW_DOCUMENT('http://'||'chirag:8889'||'/reports/rwservlet/getjobid' || substr(v_rep, length('cyan') + 2, length(v_rep)) || '?server=' ||'cyan');
end if;
END;
END;
formsweb.cfg as follows
[cyan]
BaseHTML=c:\oracle\cyan\server\webutiljini.htm
BaseHTMLJinitiator= c:\oracle\cyan\server\webutiljini.htm
baseHTMLjpi=basejpi.htm
BaseHTMLie=baseie.htm
lookAndFeel=oracle
envFile=C:\oracle\cyan\server\webutil.env
webUtilArchive=/forms90/webutil/webutil.jar,/forms90/webutil/jacob.jar
separateFrame=True
pageTitle=Cyan Ltd
form=C:\cyan\admin\security\forms\cyan_logon.fmx
otherparams=cyan_home=c:\cyan
userid=cyan/cyan@cyan
width=800
height=566
buffer_records=NO
debug_messages=NO
array=YES
query_only=NO
quiet=NO
RENDER=YES
logo=webpage
webutil.env as follows
ORACLE_HOME=C:\oracle\OraDS10g
FORMS90_PATH=C:\cyan\admin\global\forms;C:\cyan\payroll\forms;C:\oracle\cyan\forms
CLASSPATH=c:\oracle\cyan\lib\webutil.jar;c:\oracle\OraDS10g\jlib\debugger.jar;
c:\oracle\OraDS10g\jlib\ewt3.jar;c:\oracle\OraDS10g\jlib\share.jar;
c:\oracle\OraDS10g\jlib\utj90.jar;c:\oracle\OraDS10g\jdk\jre\lib\rt.jar
WEBUTIL_CONFIG=c:\oracle\cyan\server\webutil.cfg
Please assist me to solve this problem
from
Chirag Patel
NairobiHi,
I remember that in 9i we had a problem that required both the Reports and the WebUtil java libraries to be in teh Forms classpath in the default.env. This however should have been fixed in Forms 10g.
For what it is worth, can you try
- In the registry variable "REPORTS_CLASSPATH", add the path of the jar file that will be used by webutil (webutil.jar basically)
- In the default.env file, add the Reports jar (see REPORTS_CLASSPATH for values)files to the classpath of Forms
Frank -
WDeploy to Websphere6 can't use Webi application
After installing BOE 3.1 with default setting( Tomcat) successfully, I used Wdeploy to deploy to WebSphere6, but can view CR, can't view Webi Report, or new Webi Document. This behaviour is the same in both InfoView and CMC.
As I don't find a way to Attach files, I briefly list webiError, and the log file during the wdeploy command below.
AnyOne can help to point the reason?
Thanks in advance for the help!
Jennie
webiError:
Original Exception:
Error Message: org.apache.xalan.processor.TransformerFactoryImpl incompatible with javax.xml.transform.TransformerFactory
Error Code: 500
Target Servlet: /jsp/Webi_Create/universes.jsp
Error Stack:
java.lang.ClassCastException: org.apache.xalan.processor.TransformerFactoryImpl incompatible with javax.xml.transform.TransformerFactory
at javax.xml.transform.TransformerFactory.newInstance(Unknown Source)
at com.ibm.ws.jsp.translator.visitor.validator.PageDataImpl._getInputStream(PageDataImpl.java:125)
at com.ibm.ws.jsp.translator.visitor.validator.PageDataImpl.getInputStream(PageDataImpl.java:117)
at org.apache.taglibs.standard.tlv.JstlBaseTLV.validate(JstlBaseTLV.java:176)
at com.ibm.ws.jsp.translator.visitor.validator.ValidateVisitor.validateTagLib(ValidateVisitor.java:988)
at com.ibm.ws.jsp.translator.visitor.validator.ValidateVisitor.visitJspRootStart(ValidateVisitor.java:467)
at com.ibm.ws.jsp.translator.visitor.JspVisitor.processJspElement(JspVisitor.java:138)
at com.ibm.ws.jsp.translator.visitor.JspVisitor.visit(JspVisitor.java:121)
at com.ibm.ws.jsp.translator.JspTranslator.processVisitors(JspTranslator.java:121)
at com.ibm.ws.jsp.translator.utils.JspTranslatorUtil.translateJsp(JspTranslatorUtil.java:181)
at com.ibm.ws.jsp.translator.utils.JspTranslatorUtil.translateJspAndCompile(JspTranslatorUtil.java:83)
at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper.translateJsp(AbstractJSPExtensionServletWrapper.java:349)
at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper._checkForTranslation(AbstractJSPExtensionServletWrapper.java:317)
at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper.checkForTranslation(AbstractJSPExtensionServletWrapper.java:226)
at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionServletWrapper.handleRequest(AbstractJSPExtensionServletWrapper.java:131)
at com.ibm.ws.jsp.webcontainerext.AbstractJSPExtensionProcessor.handleRequest(AbstractJSPExtensionProcessor.java:270)
at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.include(WebAppRequestDispatcher.java:606)
at com.businessobjects.clientaction.webi.create.WebiCreateAction.autoWrapPerform(WebiCreateAction.java:154)
at com.businessobjects.webutil.struts.CheckSessionAction.process(CheckSessionAction.java:79)
at com.businessobjects.webutil.struts.CheckSessionAction.perform(CheckSessionAction.java:59)
at org.apache.struts.action.ActionServlet.processActionPerform(ActionServlet.java:1787)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1586)
at com.businessobjects.webutil.struts.CrystalUTF8InputActionServlet.process(CrystalUTF8InputActionServlet.java:32)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:492)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:966)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:907)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain.doFilter(WebAppFilterChain.java:118)
at com.ibm.ws.webcontainer.filter.WebAppFilterChain._doFilter(WebAppFilterChain.java:87)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:696)
at com.ibm.ws.webcontainer.filter.WebAppFilterManager.doFilter(WebAppFilterManager.java:641)
at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:475)
at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:463)
at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3107)
at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:238)
at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:811)
at com.ibm.ws.wswebcontainer.WebContainer.handleRequest(WebContainer.java:1425)
at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:92)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:465)
at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:394)
at com.ibm.ws.http.channel.inbound.impl.HttpICLReadCallback.complete(HttpICLReadCallback.java:102)
at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:152)
at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:213)
at com.ibm.io.async.AbstractAsyncFuture.fireCompletionActions(AbstractAsyncFuture.java:195)
at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:136)
at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:193)
at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:725)
at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:847)
at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1498)
WDeploy Log:
PLGC0005I: 插件配置文件 = C:\Program Files\IBM\WebSphere\AppServer\profiles\AppS
rv01\config\cells\plugin-cfg.xml
serialize_conf:
config:
Loading config.websphere6
Loading dswsbobje.properties
Warning: as_mode property not set. Standalone deployment assumed.
preconfig:
checkargs:
Validating configuration...
Deleting: C:\Program Files\Business Objects\deployment\workdir\websphere6\valida
teconfig.properties
Deleting: C:\Program Files\Business Objects\deployment\workdir\websphere6\valida
teconfig.scr
Configuration validated!
buildwar:
expand_and_package:
Copying 1 file to C:\Program Files\Business Objects\deployment\workdir\websphere
6\application
Created dir: C:\Program Files\Business Objects\deployment\workdir\websphere6\res
ources\web\dswsbobje\WEB-INF
prepareapp:
Preparing C:/Program Files/Business Objects/deployment/workdir/websphere6/applic
ation/dswsbobje
Created dir: C:\Program Files\Business Objects\deployment\workdir\websphere6\app
lication\dswsbobje
Created dir: C:\Program Files\Business Objects\deployment\workdir\websphere6\app
lication\dswsbobje\WEB-INF
Copying 1 file to C:\Program Files\Business Objects\deployment\workdir\websphere
6\application\dswsbobje\WEB-INF
Copying 1 file to C:\Program Files\Business Objects\deployment\workdir\websphere
6\application\dswsbobje\WEB-INF
Deleting directory C:\Program Files\Business Objects\deployment\workdir\webspher
e6\application\dswsbobje
_appbuildfilecall:
prepareapp:
Created dir: C:\Program Files\Business Objects\deployment\workdir\websphere6\app
lication\dswsbobje
Updating the application with modules.list file
Deleting directory C:\Program Files\Business Objects\deployment\workdir\webspher
e6\application\dswsbobje
postpackageapp:
Created dir: C:\Program Files\Business Objects\deployment\workdir\websphere6\app
lication\dswsbobje
Created dir: C:\Program Files\Business Objects\deployment\workdir\websphere6\app
lication\dswsbobje\META-INF
Moving 1 files to C:\Program Files\Business Objects\deployment\workdir\websphere
6\application\dswsbobje
Copying 1 file to C:\Program Files\Business Objects\deployment\workdir\websphere
6\application\dswsbobje\META-INF
Copying 1 file to C:\Program Files\Business Objects\deployment\workdir\websphere
6\application\dswsbobje\META-INF
Copying 1 file to C:\Program Files\Business Objects\deployment\workdir\websphere
6\application\dswsbobje\META-INF
Building ear: C:\Program Files\Business Objects\deployment\workdir\websphere6\ap
plication\dswsbobje.ear
Deleting directory C:\Program Files\Business Objects\deployment\workdir\webspher
e6\application\dswsbobje
predeploy:
predeployapp:
Looking up application's display name
Processing C:\Program Files\Business Objects\deployment\workdir\websphere6\resou
rces\web\dswsbobje\WEB-INF\web.xml to C:\Program Files\Business Objects\deployme
nt\workdir\websphere6\application\dswsbobje_name.properties
Loading stylesheet C:\Program Files\Business Objects\deployment\templates\appnam
e.xsl
Creating C:/Program Files/Business Objects/deployment/workdir/websphere6/applica
tion/dswsbobje_install.scr
deploy:
deployapp:
Moving 1 files to C:\Program Files\Business Objects\deployment\workdir\websphere
6\application
Copying 1 file to C:\Program Files\Business Objects\deployment\workdir\websphere
6\application
Deploying dswsbobje with wsadmin -f websphere6/application/dswsbobje_install.scr
WASX7209I: 使用 SOAP 连接器连接到节点 w2k3ee-TitanNode01 上的进程u201Cserver1u201D；进
程的类型为：UnManagedProcess
ADMA0080W: 没有任何许可权集合的模板策略文件包含在 1.2.x 企业应用程序中。安装应用
程序后，您可通过编辑 was.policy 文件（它位于 ${user.install.root}/config/cells/(
yourCellName)/applications/(yourAppName).ear/deployments/(yourAppName)/META-INF
目录中），修改企业应用程序的 Java 2 Security Policy。
WASX7327I: was.policy 文件的内容：
// Template policy file for enterprise application.
// Extra permissions can be added if required by the enterprise application.
// NOTE: Syntax errors in the policy files will cause the enterprise application
FAIL to start.
// Extreme care should be taken when editing these policy files. It is adv
ised to use
// the policytool provided by the JDK for editing the policy files
// (WAS_HOME/java/jre/bin/policytool).
grant codeBase "file:$" {
grant codeBase "file:$" {
grant codeBase "file:$" {
grant codeBase "file:$" {
grant codeBase "file:$" {
ADMA5016I: 安装 dswsbobje 已启动。
ADMA5058I: 已使用部署目标的版本验证应用程序和模块版本。
ADMA5005I: 在 WebSphere Application Server 存储库中配置了应用程序 dswsbobje。
ADMA5053I: 创建了已安装的任选软件包的库引用。
ADMA5005I: 在 WebSphere Application Server 存储库中配置了应用程序 dswsbobje。
ADMA5001I: 应用程序二进制文件保存在 C:\Program Files\IBM\WebSphere\AppServer\pro
files\AppSrv01\wstemp\Script11e830f3b81\workspace\cells\w2k3ee-TitanNode01Cell\a
pplications\dswsbobje.ear\dswsbobje.ear 中
ADMA5005I: 在 WebSphere Application Server 存储库中配置了应用程序 dswsbobje。
SECJ0400I: 成功地用 appContextIDForSecurity 信息更新了应用程序 dswsbobje。
ADMA5011I: 清除应用程序 dswsbobje 的 temp 目录已完成。
ADMA5013I: 应用程序 dswsbobje 安装成功。
IBM WebSphere Application Server R6.1
WebSphere 插件配置生成器
Copyright IBM Corp., 1997-2006
PLGC0008I: 插件正在为单元生成单台服务器插件配置文件 w2k3ee-TitanNode01Cell, node
w2k3ee-TitanNode01, 服务器 server1.
PLGC0005I: 插件配置文件 = C:\Program Files\IBM\WebSphere\AppServer\profiles\AppS
rv01\config\cells\plugin-cfg.xml
serialize_conf:
config:
Loading config.websphere6
Loading jsfplatform.properties
Warning: as_mode property not set. Standalone deployment assumed.
preconfig:
checkargs:
Validating configuration...
Deleting: C:\Program Files\Business Objects\deployment\workdir\websphere6\valida
teconfig.properties
Deleting: C:\Program Files\Business Objects\deployment\workdir\websphere6\valida
teconfig.scr
Configuration validated!
buildwar:
expand_and_package:
Copying 1 file to C:\Program Files\Business Objects\deployment\workdir\websphere
6\application
Created dir: C:\Program Files\Business Objects\deployment\workdir\websphere6\res
ources\web\jsfplatform\WEB-INF
prepareapp:
Preparing C:/Program Files/Business Objects/deployment/workdir/websphere6/applic
ation/jsfplatform
Created dir: C:\Program Files\Business Objects\deployment\workdir\websphere6\app
lication\jsfplatform
Created dir: C:\Program Files\Business Objects\deployment\workdir\websphere6\app
lication\jsfplatform\WEB-INF
Copying 1 file to C:\Program Files\Business Objects\deployment\workdir\websphere
6\application\jsfplatform\WEB-INF
Copying 1 file to C:\Program Files\Business Objects\deployment\workdir\websphere
6\application\jsfplatform\WEB-INF
Deleting directory C:\Program Files\Business Objects\deployment\workdir\webspher
e6\application\jsfplatform
_appbuildfilecall:
postpackageapp:
Created dir: C:\Program Files\Business Objects\deployment\workdir\websphere6\app
lication\jsfplatform
Created dir: C:\Program Files\Business Objects\deployment\workdir\websphere6\app
lication\jsfplatform\META-INF
Moving 1 files to C:\Program Files\Business Objects\deployment\workdir\websphere
6\application\jsfplatform
Copying 1 file to C:\Program Files\Business Objects\deployment\workdir\websphere
6\application\jsfplatform\META-INF
Copying 1 file to C:\Program Files\Business Objects\deployment\workdir\websphere
6\application\jsfplatform\META-INF
Copying 1 file to C:\Program Files\Business Objects\deployment\workdir\websphere
6\application\jsfplatform\META-INF
Building ear: C:\Program Files\Business Objects\deployment\workdir\websphere6\ap
plication\jsfplatform.ear
Deleting directory C:\Program Files\Business Objects\deployment\workdir\webspher
e6\application\jsfplatform
predeploy:
predeployapp:
Looking up application's display name
Processing C:\Program Files\Business Objects\deployment\workdir\websphere6\resou
rces\web\jsfplatform\WEB-INF\web.xml to C:\Program Files\Business Objects\deploy
ment\workdir\websphere6\application\jsfplatform_name.properties
Loading stylesheet C:\Program Files\Business Objects\deployment\templates\appnam
e.xsl
Creating C:/Program Files/Business Objects/deployment/workdir/websphere6/applica
tion/jsfplatform_install.scr
deploy:
deployapp:
Moving 1 files to C:\Program Files\Business Objects\deployment\workdir\websphere
6\application
Copying 1 file to C:\Program Files\Business Objects\deployment\workdir\websphere
6\application
Deploying jsfplatform with wsadmin -f websphere6/application/jsfplatform_install
.scr
WASX7209I: 使用 SOAP 连接器连接到节点 w2k3ee-TitanNode01 上的进程u201Cserver1u201D；进
程的类型为：UnManagedProcess
ADMA0080W: 没有任何许可权集合的模板策略文件包含在 1.2.x 企业应用程序中。安装应用
程序后，您可通过编辑 was.policy 文件（它位于 ${user.install.root}/config/cells/(
yourCellName)/applications/(yourAppName).ear/deployments/(yourAppName)/META-INF
目录中），修改企业应用程序的 Java 2 安全策略。
WASX7327I: was.policy 文件的内容：
// Template policy file for enterprise application.
// Extra permissions can be added if required by the enterprise application.
// NOTE: Syntax errors in the policy files will cause the enterprise application
FAIL to start.
// Extreme care should be taken when editing these policy files. It is adv
ised to use
// the policytool provided by the JDK for editing the policy files
// (WAS_HOME/java/jre/bin/policytool).
grant codeBase "file:$" {
grant codeBase "file:$" {
grant codeBase "file:$" {
grant codeBase "file:$" {
grant codeBase "file:$" {
ADMA5016I: 安装 jsfplatform 已启动。
ADMA5058I: 已使用部署目标的版本验证应用程序和模块版本。
ADMA5005I: 在 WebSphere Application Server 存储库中配置了应用程序 jsfplatform。
ADMA5053I: 创建了已安装的任选软件包的库引用。
ADMA5005I: 在 WebSphere Application Server 存储库中配置了应用程序 jsfplatform。
ADMA5001I: 应用程序二进制文件保存在 C:\Program Files\IBM\WebSphere\AppServer\pro
files\AppSrv01\wstemp\Script11e8310e151\workspace\cells\w2k3ee-TitanNode01Cell\a
pplications\jsfplatform.ear\jsfplatform.ear 中
ADMA5005I: 在 WebSphere Application Server 存储库中配置了应用程序 jsfplatform。
SECJ0400I: 成功地用 appContextIDForSecurity 信息更新了应用程序 jsfplatform。
ADMA5011I: 清除应用程序 jsfplatform 的 temp 目录已完成。
ADMA5013I: 应用程序 jsfplatform 安装成功。
IBM WebSphere Application Server R6.1
WebSphere 插件配置生成器
Copyright IBM Corp., 1997-2006
PLGC0008I: 插件正在为单元生成单台服务器插件配置文件 w2k3ee-TitanNode01Cell, node
w2k3ee-TitanNode01, 服务器 server1.
PLGC0005I: 插件配置文件 = C:\Program Files\IBM\WebSphere\AppServer\profiles\AppS
rv01\config\cells\plugin-cfg.xml
serialize_conf:
BUILD SUCCESSFUL
Total time: 37 minutes 36 seconds
Ant return code: 0
C:\Program Files\Business Objects\deployment>I got the very same issue while deploying WebSphere 6.1.0.7 on BOXI3.1. It seems that there is some conflict between parsers. The xalan parser shipped with Websphere6.1.0.7. But I still couldn't work this issue out. Could anyone help us on that?
Thanks in advance,
Mohamed Ali -
First of all...I'm using a Linksys WRT54G v5 wireless router and a sbc/yahoo DSL service with a Siemen's 4100 DSL modem. I am addressing all of my issues using a Dell XPS710 fully loaded running Windows Vista and using IE 7.0.6 I've always been able to use the internet (besides DSL's inevitable issues), but in the last few days have been messing with the settings of my network in order to streamline our filesharing/printersharing within my household.
So I tried checking out the 'General Linksys Router FAQs' but when I clicked the links regarding my problem, it only loaded windows addressing how to set up a "PPPOE DSL service."
So my issue is in regard to accessing the Web-based utility. When I key in my router's IP address to my web browser (http://192.168.1.1/) and type in the generic password, then it loads the web-utility with obvious 'errors on page.' I then cannot do anything more than change the time zone...I cannot chose a different tab than the "Setup Basic Startup" tab which loads automatically.
When I click on the "wireless" tab for example, a white page loads with this gibberish:
¶âÐ&†¶¤ ´! h% Cèl£¹>²$h VÚ ªå QVÄš\aIAB Öd` «°xU cñj Veñê Æâ5 ¬Æâ5)ŒÅk X Å;¡0 O– ° cDæ‰äË eì …BÚƒ,í³³óÅ ÍÚA †P ¿þ öc.]¡˜g®2( Ê1‘3š)}l’Ç*y¬ÐÖ }¤uòX¥ úH[›ä±F[[ô‘¶ž Ç:m•%úL›e:¯FÐN'Ö ÚéÌšA; Z«†ž 50<ˆ g^Œ3/Æ™ ãÌ‹qæÅ8óbœy1μ˜`^L0/&˜ Ì‹ æÅ$ó(Œ™ÇÎd‹Â  W0• ‘ Ãvˆ•´Í®"µÍR Û
I can then return to the previous page on my browser to see the Setup screen again, but there are still obvious visual errors in how the page loaded (it has some of those stupid 'red x's' where images were supposed to load).
So I tried updating the the firmware (its still 1.00.6) using the instructions I found for my router on the linksys website...but halfway during the upload of the .bin file from the management screen, the page failed to load and I recieved the "Internet Explorer cannot display the webpage" message. Since then, my connection has been cutting in and out (Local only) and sometimes I cannot view that the WRT54G is part of my network. Connecting to the internet directly through my DSL modem works just fine still.
So why can't I access my web-utility correctly? Why can I not upgrade my firmware? Would upgrading the firmware fix the web-utility access errors? Why is the connection cutting 'in and out' rather than just not working? Has ANYONE else had this problem (with the web-based utility not loading correctly in IE)?
Thanks,
Todd W.
Message Edited by Veridicus on 12-11-2007 07:11 AMI fixed it! I had to 'reset' the modem for that minute and then upload the firmware from a non-vista pc. The web browser gave me the 'upload successful' page and so I restarted the computer and unplugged and replugged back in the router...then when the computer rebooted and I loaded the Linksys Router Web-Utility...viola...it no longer contained those ridiculous error screens or jibberish.
And here I though I was gonna have to drop another 50 bucks... -
Wrt110 still cannot access web utility w/o resetting
http://homecommunity.cisco.com/t5/Wireless-Routers/Unable-to-Access-Router-Admin-Page/m-p/293835/hig...
Long existing problem, that IE8 temporarily cleared up (actually only for a day or so).
Router has to be reset to view the on-line web utility. Doesnt matter what version of Windows or IE. With and without A/v and firewall. Tried MANY variables.
This router will not access the Advanced Settings web utility pages no matter what I do, unless it's to power off then back on.
Once I get this problem straightened out I can address the other one: my new netbook cant get on the internet at home with my password. It forces loss of connectivity to the hardwired desktop when I try.
But I really need to know what I'm doing wrong, why I can NEVER get the online admin pages without powering the router off/on.
Please guide me.
Solved!
Go to Solution.Yes. Hardwired to the router.
Using the "Advanced Settings" on the menu under the router model in the EasyLink Advisor.
Also by typing IN the URL using http and https. With and without firewall. W & W/o a/v. Ie 7 & 8. Vista & Windows 7.
Ie64 and Ie32. And Firefox.
I upgraded from Vista 64 to W7 64. And updated IE from 7 to 8 (which gave me one day access without resetting).
Please offer suggestions. It has to be something in the software since ALL the variables have been tried (I cant think of anything else to change).
Router's webpage (192.168.1.1 which IS the address used by the EasyLink Advisor when I click on Advanced Settings) results in a Diagnose Connection Problems pages which ends with this result:
Problems found: "The remote device or resource won't accept the connection" Only when I power off/on can I get the signin popup and the web utility/admin pages.
I might add that my netbook cannot get on my network even with my password. I no longer use mac address filtering; turned it OFF. It IS in the OFF/Disabled position on the router's utility page. I think this problem might get fixed once I find the solution to getting to the admin pages/web utility pages without having to power down/up.
I can get this desktop AND the netbook on if I power everything down. But who wants to do that every time?
HELP please!
thank you for ready and any suggestions -
BEFW-11s4 ver. 4 Web-Utility is downlevel
I am trying to use a BEFW-11s4 that I put on the shelf years ago. I am configuring it as a cascaded router in a LAN-LAN configuration (as the 2nd router).
The ethernet cable from the main router is connected to one of the ethernet ports on the BEFW.
DHCP is disabled on the BEFW.
The IP addr of the main router is 10.0.0.2 .
The IP addr of the BEFW is 192.168.1.1 .
I have two problems that I hope yall can help with, because reusing this router is way cooler than buying another one :-).
First, the Web-Utility of the BEFW seems to be downlevel, since it does not match the illustrations in the manual for it. I need the uplevel utility to enable WPA2 wireless security. I suspect that the firmware is downlevel also, but the linksys site says that there are no downloads available... So, where can I download & how do I install the current level of the Web-Utility?
Second, when I configure the BEFW as the downstream router, which I can get working in wired mode, I can no longer access the BEFW at 192.168.1.1 . In order to access it again, I have to only connect the computer to the BEFW, and then hold down reset long enuf to restore the original settings. If anyone knows how to get to the BEFW Web-Utility after it is set up in LAN-LAN cascaded mode, please let me know.
Thanks!!!!The BEFW11S4 does not have the WPA2 wireless security type. I believe it is not compatible with that type of security. What you can set on the router is WPA Pre-shared key and as far as I know, the last firmware update was version 1.52.02.
For your second concern, make sure that you set a Static IP on the BEFW router so that you can access its UI. Also, do not use the192.168.1.1 IP Address on the BEFW if your router IP is 10.0.0.2 since you have a LAN to LAN network. The secondary router should be within the range of the main router. Try using 10.0.0.5 which is within the range with the main router.
You may refer to the procedure in cascading LAN to LAN on this link: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=785463d9ecaf4cac84aed245b08d615f_3733.xml&pid=80&r...
Hope that helps! -
How do I access the web utility with model cisco sf302-08p ?
Hi,i have a problem with the model Cisco SB SF302-08PP Switch , i connect a cable rj45 to my pc and configure the adapter local area connection (ip address:192.168.1.252), the LEDs blink green, and go to the address bar and get the IP by default, which according to the manual is 192.168.1.254 and the result is: page not found. Is there any way to change the web utility? How do I access the web utility?
restore the switch by holding more than 30 seconds and try accessing with ip 192.168.1.254. username and password is "cisco". before change your base ip to 192.168.1.2-253.try to ping and check the connectivity
-
Can not open Web from Nokia N81
Hi
My Nokia N81 worked fine until today
I just connected it to PC Suite and made a synchronization - now I have folowing problem - I can not open web-browser any more.
When I go into menu and then try to open Icon web - screens becames blue (desctopimage) for a second and then I'm landing again in menu just as it was before click on icon
What can be the reason of this problem?
Similar happened also with N-Gage Icon. I've tried it with memory card and without it - the result is the same - I can not go into web-section of my NokiaHi,
It seems that some faults has occurred during
the synchronization. You should re-set your
internet settings. If the issue persists your
phone will need reformat.
Regards.
Fattan -
I can't acces to BIOS to change boot order on Satellite 2410
I can't acces to cmos to change boot priorityre. HELP !!!
Notebook Satellite S2410-504.
I try to normally press "C" on startup to boot from CD. but it don't work.
F12 too don't help.
I think some set some password on HWUtility, but how disable this pasword?
Please HELP!!!!LOL... motherboard replacement? You dont need a new Motherboard.. Just a new flashed BIOS... Buy a new flashed BIOS... or ask someone to flash your old one...
Aaaand you can always update the BIOS with the wrong procedure :) as long as you dont reboot... If your highly skilled you will be also able to do the following trick...
Get a NB with the same BIOS and BIOS chip... Load the operating system... remove the BIOS chip while the operating system is... operating... Put the bad flashed or empty BIOS chip in the socket... Flash it... Now you got your accidentally bad flashed BIOS chip flashed...
To your BIOS Password problem Problem... I dont know, if Toshiba has build in a reset Jumper... But in Desktop systems, you can always reset the "complete" BIOS + Password with that jumper. Should be possible in Notebooks too...
Message was edited by: Stryker -
Downloaded 5.1.1 to my iphone. Now, Safari will not connect to my server. Can not download web pages and many of my apps. Email seems to be ok. iphone running slow and sluggish. I have read several other users have experienced the same problem. Any solutions?
Basic troubleshooting steps oultlined in the User Guide are restart, reset, restore from backup, restore as new device.
You need to go through all steps in succession until your problem is solved. If going through ALL these steps fails to resolve your issue, then you'll need to bring your phone into Apple for evaluation and possible replacement. -
Can I print web pages from firefox using adobe pro 9 (Not using PDF download) and if so how
Can I print web pages from Firefox 3.6.12 using adobe pro 9 (not using PDF Download) and if so how.
{Ctrl + P} - do you have a PDF Printer listed in the Printer - Name drop-down?
-
Can't open web addresses from an email-get an ERROR message saying-no application could be found
Hi, I had the same problem. I finally figured it out. Plug in the USB cord to your ipad, but beofre plugging it into your computer make sure your ipad is not in the locked or sleep mode. Once I did this, my photos showed up and started downloading. Hope that helps you!
Maybe you are looking for
-
Need Help with Adobe Acrobat please
I have recently started using Adobe Acrobat. I use it to combine several files (Word, powerpoint, and excel docs) into one pdf, which I then email out to meeting attendees. Then, at the meeting, I use the pdf for my AV presentation. But - my remote s
-
hi, there is not HDMI port on X201 so how to connect to HD TV and watch HD movies with HD audios from the harddisk? + ThinkPad X201 3626-FBG / Intel Core i5 M520 2.4Ghz / DDR3 8Gb / Intel SSD 730 Series 240Gb / 12.1" WXGA 1280x800px / Dual boot Win7
-
Get 5800 to use 802.11b even when the router suppo...
I wonder if there's a way to get the 5800 to use 802.11b mode WiFi although the router supports both 802.11b/g. I checked all the connection settings menus and even in the advanced connection settings but I didn't find a way to do this. So does anyon
-
Not printing colors right and can not find the button to get it aligned properly, very green
Ink was low bought all new carteriges and it is still printing colors off. More green tones of green. dont know how to get adjusted to print correctly.
-
Account password reset too often
I have a strange situation here. Every one week I'm receiving an e-mail notification that my Apple ID has been reset and I'm 100% sure that nobody except me is using my ID. It might be ridiculous but I suspect that someone is trying to hack my passwo