Linux - Gettings Errors
Hi ,
Please advise me the solution.
I am Runing Red Hat 4 U 4 on 64 bit intel server. I installed the oracle 10g R2 RAC. Every thing is working fine but I am getting following errors in /var/log/messages. Using ASM over RAW devices.
I am also providing all the settings/entries in fstab file and related files.
================= /var/log/messages ==============
Dec 3 13:28:31 cc-orcl-ld2 kernel: SCSI error : <0 0 0 2> return code
= 0x20000
Dec 3 13:28:31 cc-orcl-ld2 kernel: end_request: I/O error, dev sdc,
sector 1606333775
Dec 3 13:28:31 cc-orcl-ld2 kernel: end_request: I/O error, dev sdc,
sector 1606333776
===============================================
# cat /proc/cmdline
ro root=LABEL=/ rhgb quiet noexec=off numa=off elevator=deadline
console=tty0
=================================================
[oracle@cc-orcl-ld2 io-error]$ cat /etc/sysconfig/rawdevices
# This file and interface are deprecated.
# Applications needing raw device access should open regular
# block devices with O_DIRECT.
# raw device bindings
# format: <rawdev> <major> <minor>
# <rawdev> <blockdev>
# example: /dev/raw/raw1 /dev/sda1
# /dev/raw/raw2 8 5
# Voting Disk 500mb
/dev/raw/raw1 /dev/emcpowerb1
# OCR-500mb
/dev/raw/raw2 /dev/emcpowerc1
# Oracle Data
/dev/raw/raw3 /dev/emcpowera1
# New Oracle Volume
/dev/raw/raw4 /dev/emcpowerd1
=======================================================
[oracle@cc-orcl-ld2 io-error]$ cat /etc/fstab
# This file is edited by fstab-sync - see 'man fstab-sync' for details
LABEL=/ / ext3 defaults
1 1
LABEL=/boot /boot ext3 defaults
1 2
none /dev/pts devpts gid=5,mode=620
0 0
none /dev/shm tmpfs defaults
0 0
LABEL=/home /home ext3 defaults
1 2
none /proc proc defaults
0 0
none /sys sysfs defaults
0 0
LABEL=/tmp /tmp ext3 defaults
1 2
LABEL=/u01 /u01 ext3 defaults
1 2
LABEL=/var /var ext3 defaults
1 2
/dev/cciss/c0d0p2 swap swap defaults
0 0
# NAS Mounts
cc-file-ap3:/root_vdm_12/fs_e2/vol1 /cc-file-ap3/vol1
nfs rsize=8192,wsize=8192,async,hard,bg 0 0
cc-file-ap4:/vol/vol2 /cc-file-ap4/vol2
nfs rw,bg,vers=3,tcp,timeo=600,rsize=8192,wsize=8192,hard,intr
0 0
cc-file-ap2:/root_vdm_10/fs_ccc_2/ccc_2 /cc-file-ap2/ccc_2
nfs rw,bg,vers=3,tcp,timeo=600,rsize=8192,wsize=8192,hard,intr
0 0
cc-file-ap6:/vol/test6f /cc-file-ap6/test6f nfs
nfsvers=3,proto=tcp,hard,intr,rsize=8192,wsize=8192 0 0
cc-file-ap3:/root_vdm_12/fs_444_3/444_3 /cc-file-ap3/444_3
nfs rsize=8192,wsize=8192,async,hard,bg 0 0
cc-file-ap3:/root_vdm_12/fs_statefarmtest/statefarmtest
/cc-file-ap3/statefarmtest nfs rsize=8192,wsize=8192,async,hard,bg 0 0
cc-file-ap5:/vol/VOL_688_1 /prodservices/data/custdata/688 nfs
rsize=8192,wsize=8192,async,hard,bg 0 0
ve-orcl-ld1:/u02 /ve-orcl-ld1/u02 nfs
rsize=8192,wsize=8192,async,hard,bg 0 0
# NS ticket 54133
cc-file-ap1:/root_vdm_8/fs_444_1/444_1 /cc-file-ap1/444_1
nfs rw,bg,vers=3,tcp,timeo=600,rsize=8192,wsize=8192,hard,intr
0 0
cc-file-ap2:/root_vdm_10/fs_444_2/444_2 /cc-file-ap2/444_2
nfs rw,bg,vers=3,tcp,timeo=600,rsize=8192,wsize=8192,hard,intr
0 0
#Ticket 55504
cc-file-ap4:/vol/VOL_686_1 /prodservices/data/custdata/686
nfs rsize=8192,wsize=8192,async,hard,bg 0 0
# per ticket number 58783 ndm 09/07/07
cc-file-ap4:/vol/V_699_1 /prodservices/data/custdata/699
nfs rsize=8192,wsize=8192,async,hard,bg 0 0
# per task id 81662 "Mount NAS volume" NDM 10/24/07
dev-file-ad4:/vol/fv_cebeta_01 /devservices/data/custdata/beta nfs
rsize=8192,wsize=8192,async,hard,bg 0 0
# sudo /sbin/powermt display dev=all
Pseudo name=emcpowerc
CLARiiON ID=APM00062200016 [sg_cc-orcl-RAC-dev]
Logical device ID=600601606590180002FB58708710DC11
[cc-orcl-RAC-dev_OCR-log-500M_L13R10RG1SB]
state=alive; policy=BasicFailover; priority=0; queued-IOs=0
Owner: default=SP B, current=SP B
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - --
Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs
Errors
==============================================================================
0 qla2xxx sda SP B1 active alive 0
0
0 qla2xxx sde SP A0 active alive 0
0
Pseudo name=emcpowerb
CLARiiON ID=APM00062200016 [sg_cc-orcl-RAC-dev]
Logical device ID=600601606590180046DECA868710DC11
[cc-orcl-RAC-dev_voting-data-log_500M_L19R10RG1SB]
state=alive; policy=BasicFailover; priority=0; queued-IOs=0
Owner: default=SP B, current=SP B
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - --
Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs
Errors
==============================================================================
0 qla2xxx sdb SP B1 active alive 0
0
0 qla2xxx sdf SP A0 active alive 0
0
Pseudo name=emcpowera
CLARiiON ID=APM00062200016 [sg_cc-orcl-RAC-dev]
Logical device ID=600601606590180082D4901F7E10DC11
[cc-orcl-RAC-dev_oracle-data_1.2T_ML381_SB]
state=alive; policy=BasicFailover; priority=0; queued-IOs=0
Owner: default=SP B, current=SP B
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - --
Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs
Errors
==============================================================================
0 qla2xxx sdc SP B1 active alive 0
0
0 qla2xxx sdg SP A0 active alive 0
0
Pseudo name=emcpowerd
CLARiiON ID=APM00062200016 [sg_cc-orcl-RAC-dev]
Logical device ID=60060160C8FC1C00043E02FC265BDC11
[cc-orcl-RAC-dev_Logs_100G_L68R5RG17SB]
state=alive; policy=BasicFailover; priority=0; queued-IOs=0
Owner: default=SP B, current=SP B
==============================================================================
---------------- Host --------------- - Stor - -- I/O Path - --
Stats ---
### HW Path I/O Paths Interf. Mode State Q-IOs
Errors
==============================================================================
0 qla2xxx sdd SP B1 active alive 0
0
0 qla2xxx sdh SP A0 active alive 0
0
avg-cpu: %user %nice %sys %iowait %idle
8.00 0.00 8.00 13.00 71.00
Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s rkB/s wkB/s
avgrq-sz avgqu-sz await svctm %util
cciss/c0d0 0.00 51.00 0.00 32.00 0.00 664.00 0.00 332.00
20.75 0.02 0.66 0.25 0.80
sda 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00
sdb 0.00 0.00 2.00 1.00 4.00 1.00 2.00 0.50
1.67 0.00 0.33 0.33 0.10
sdc 444.00 0.00 447.00 0.00 113824.00 0.00 56912.00
0.00 254.64 0.55 1.23 1.23 54.80
sdd 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00
sde 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00
sdf 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00
sdg 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00
sdh 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00
sdi 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00
sdj 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
0.00 0.00 0.00 0.00 0.00
zzzMon Dec 3 13:28:25 PST 2007
Kernel Interface table
Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR
TX-DRP TX-OVR Flg
eth0 1500 0 252359177 0 0 0 623408018 0
0 0 BMRU
eth0:1 1500 0 - no statistics available -
BMRU
eth1 1500 0 4969990 0 0 0 5 0
0 0 BMRU
eth2 1500 0 49310376 0 0 0 59145492 0
0 0 BMRU
eth3 1500 0 4969986 0 0 0 2 0
0 0 BMRU
lo 16436 0 9791500 0 0 0 9791500 0
0 0 LRU
sit0 1480 0 0 0 0 0 0 0
0 0 O
Tcp:
3902496 active connections openings
228163 passive connection openings
0 failed connection attempts
379 connection resets received
80 connections established
261897856 segments received
628528469 segments send out
20867 segments retransmited
0 bad segments received.
259 resets sent
zzzMon Dec 3 13:29:25 PST 2007
Kernel Interface table
Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR
TX-DRP TX-OVR Flg
eth0 1500 0 252360270 0 0 0 623409699 0
0 0 BMRU
eth0:1 1500 0 - no statistics available -
BMRU
eth1 1500 0 4969992 0 0 0 5 0
0 0 BMRU
eth2 1500 0 49519566 0 0 0 59200804 0
0 0 BMRU
eth3 1500 0 4969988 0 0 0 2 0
0 0 BMRU
lo 16436 0 9791677 0 0 0 9791677 0
0 0 LRU
sit0 1480 0 0 0 0 0 0 0
0 0 O
zzz ***Mon Dec 3 13:28:25 PST 2007
top - 13:28:25 up 12 days, 18:02, 4 users, load average: 1.16, 0.97,
0.55
Tasks: 259 total, 2 running, 257 sleeping, 0 stopped, 0 zombie
Cpu(s): 2.3% us, 2.1% sy, 0.0% ni, 93.0% id, 2.5% wa, 0.0% hi,
0.1% si
Mem: 16254476k total, 16206136k used, 48340k free, 179344k
buffers
Swap: 16385272k total, 72788k used, 16312484k free, 14633624k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
2123 oracle 16 0 6083m 1.3g 1.3g S 27 8.1 0:36.10 oracle
9762 oracle 15 0 6087m 3.6g 3.6g R 4 23.1 6:37.60 oracle
9758 oracle 15 0 6087m 3.6g 3.6g S 2 23.2 14:29.89 oracle
5005 oracle 15 0 8460 1136 764 R 2 0.0 0:00.01 top
1 root 16 0 4756 556 460 S 0 0.0 0:10.80 init
2 root RT 0 0 0 0 S 0 0.0 0:51.55
migration/0
3 root 34 19 0 0 0 S 0 0.0 0:02.43
ksoftirqd/0
4 root RT 0 0 0 0 S 0 0.0 0:38.86
migration/1
5 root 34 19 0 0 0 S 0 0.0 0:01.16
ksoftirqd/1
6 root RT 0 0 0 0 S 0 0.0 0:41.21
migration/2
7 root 34 19 0 0 0 S 0 0.0 0:00.92
ksoftirqd/2
8 root RT 0 0 0 0 S 0 0.0 0:42.16
migration/3
As far as I can see, the only errors I saw were:
================= /var/log/messages ==============
Dec 3 13:28:31 cc-orcl-ld2 kernel: SCSI error : <0 0 0 2> return code
= 0x20000
Dec 3 13:28:31 cc-orcl-ld2 kernel: end_request: I/O error, dev sdc,
sector 1606333775
Dec 3 13:28:31 cc-orcl-ld2 kernel: end_request: I/O error, dev sdc,
sector 1606333776
1. check if first line printed above are related to the second and third lines:
use the shell command: cat /proc/scsi/scsi
2. the second and third line are SCSI error messages. This means the SCSI controller received a message from the device about an error.
Similar Messages
-
Errors - ORA-01034, ORA-27101 & Linux-x86_64 Error: 2: No such file or dir
I have installed Oracle 10g database and AS 10g on SUSE linux EE 10 (SP2)
When I try to log in as system/system using sqlplus locally on the server, it works fine. However, when I try the following I get error messages:
SQL> conn system/system@botsdb
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
I tried the same from my laptop through sqlplus and the error message is the same.
I checked if the database was up and to check this I executed follwing commands whicle still being logged as system/system:
SQL>Select * from v$database;
SQL>Select * from v$instance;
SQL>Select * from tab;
These do bring results. Also if I try to start up the database again, it gives error message that the database is already up. I have restarted the db number of times, checked if my listener was listening on the service BOTSDB and these all seem fine.
It is very intriguing that when @BOTSDB is attached while connecting, the connection fails.
Can someone please guide me to sort this error?
Thanks and kind regards,
AparnaHi
I am answering all the three questions here.
1) No of instances on the machine, I understand it is 1.
2) Results of lsnrctl status
oracle@linuxserver:~> lsnrctl status
LSNRCTL for Linux: Version 10.1.0.4.2 - Production on 28-JUL-2010 09:19:33
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=linuxserv.dcdm.mu)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.1.0.4.2 - Production
Start Date 27-JUL-2010 11:24:12
Uptime 0 days 21 hr. 55 min. 20 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/app/ora10ginfra/network/admin/listener.ora
Listener Log File /oracle/app/ora10ginfra/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=linuxserver.dcdm.mu)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "metarep.dcdm.mu" has 1 instance(s).
Instance "metarep", status READY, has 3 handler(s) for this service...
The command completed successfully
--Note that lsnrctl status command was issued after loading 10ginfra.env file.
Please note that the listener for the database is set as DBLISTENER and lsnrctl status DBLISTENER was executed after loading 10gdb.env file. The results of lsnrctl status DBLISTENER are as follows:
oracle@linuxserver:~> . ./10gdb.env
oracle@linuxserver:~> lsnrctl status DBLISTENER
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 28-JUL-2010 09:24:44
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.107.123)(PORT=1650)))
STATUS of the LISTENER
Alias DBLISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 27-JUL-2010 15:11:28
Uptime 0 days 18 hr. 13 min. 15 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/app/ora10gdb/network/admin/listener.ora
Listener Log File /oracle/app/ora10gdb/network/log/dblistener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.16.107.123)(PORT=1650)))
Services Summary...
Service "BOTSDB" has 1 instance(s).
Instance "BOTSDB", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
3) The output of ps -ef |grep pmon is
oracle@linuxserver:~> ps -ef |grep pmon
oracle 12524 12091 0 09:16 pts/1 00:00:00 grep pmon
oracle 12525 1 0 Jul27 ? 00:00:00 ora_pmon_metarep
oracle 25776 1 0 Jul27 ? 00:00:00 ora_pmon_BOTSDB
The contents of listener.ora in two different Oracle Homes (one for AS infrastrcuture and another one for database) are as follows:
oracle@linuxserver:/oracle/app/ora10ginfra/network/admin> vi listener.ora
# listener.ora Network Configuration File: /oracle/app/ora10ginfra/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/app/ora10ginfra)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = linuxserv.dcdm.mu)(PORT = 1521))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
oracle@linuxserver:/oracle/app/ora10gdb/network/admin> vi listener.ora
# Generated by Oracle configuration tools.
SID_LIST_DBLISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/app/ora10gdb/)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = BOTSDB)
(ORACLE_HOME = /oracle/app/ora10gdb/)
DBLISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.107.123)(PORT = 1650))
Kind regards,
Aparna -
Oracle 10G Linux runInstaller Error in writing to directory
RDBMS Version: 10.1.0.3.0
Operating System and Version: Enterprise Red Hat Linux 4.0
Linux runInstaller Error in writing to directory
Steps :-
1. Downloaded the Install 10.1.0.3 for Linux X86
2. Followed the Instructions as per B15521-01
3. When running runInstaller got below Error
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-9, SuSE-8or UnitedLinux-1.0
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2005-06-28_01-40-22PM/installActions2005-06-28_01-40-22PM.log
4. Found Patch 4153257 after unzipping the file and running as below got another error
$ ./runInstaller -paramFile /home/oracle/p4153257
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
The Java RunTime Environment was not found at 0/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
5. Then Copied the oraparam.ini to the folder where the original oraparam.ini file was present ie /tmp/orcl/Disk1/install
6. After running the installer again got below error
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-9, SuSE-8, UnitedLinux-1.0 or redhat-4
Passed
All installer requirements met.
Checking Temp space: must be greater than 80 MB. Actual 3409 MB Passed
Checking swap space: must be greater than 150 MB. Actual 2055MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2005-06-28_01-53-49PM. Please wait ...sh: /tmp/orcl/Disk1/install/unzip: No such file or directory
Error in writing to directory /tmp/OraInstall2005-06-28_01-53-49PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
7. Saw the Error that it was looking for unzip in /tmp/orcl/Disk1/install so Created a Soft link
8. Still the other Error exists ie as below. Well the DIR is created and oracle user has written files. So not sure why it says check disk space or directory is writable.
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-9, SuSE-8, UnitedLinux-1.0 or redhat-4
Passed
All installer requirements met.
Checking Temp space: must be greater than 80 MB. Actual 3409 MB Passed
Checking swap space: must be greater than 150 MB. Actual 2055MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2005-06-28_02-23-50PM. Please wait ...
Error in writing to directory /tmp/OraInstall2005-06-28_02-23-50PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
$ ls -al /tmp/OraInstall2005-06-28_02-23-50PM
total 40
drwxr-xr-x 3 oracle oinstall 4096 Jun 28 14:23 .
drwxrwxrwt 44 root root 4096 Jun 29 04:03 ..
-rwxr-xr-x 1 oracle oinstall 4036 Jun 28 14:23 command_output_27899
drwxr-xr-x 2 oracle oinstall 4096 Jun 28 14:23 images
-rwxr-xr-x 1 oracle oinstall 528 Jun 28 14:23 installActions2005-06-28_02-23-50PM.logI am not sure what was wrong in the Initial download of the Install.
I did it again and this time it came properly and all the files in the install directory ie unzip was present and the Installer came up properly. -
ORA-01034: ORACLE not available ORA-27101: shared mem Linux-x86_64 Error 2
Hello,
I was in the process of importing a table and my VM Rhel 6 Oracle machine hung. I rebooted the machine and Im getting the following issues.
SQL*Plus: Release 11.2.0.1.0 Production on Wed May 9 12:51:47 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter user-name: example
Enter password:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Process ID: 0
Session ID: 0 Serial number: 0
I am a bit concerned over the Linux-x86_64 Error 2 issue. Can someone assist here please.
Thanks Kevin DeckerRequest per the 1st earlier post.
id=601(oracle) gid=517(oinstall) groups=517(oinstall),518(dba)
-bash-3.2$ env | sort
_=/bin/env
CLASSPATH=/usr/app/oracle/product/11.2.0/jlib:/usr/app/oracle/product/11.2.0/rdb ms/jlib
G_BROKEN_FILENAMES=1
HISTSIZE=1000
HOME=/usr/app/oracle
HOSTNAME=LPLCLDDB105.lab.trcn.aexp.com
INPUTRC=/etc/inputrc
LANG=en_US.UTF-8
LD_LIBRARY_PATH=/usr/app/oracle/product/11.2.0/lib:/lib:/usr/lib
LESSOPEN=|/usr/bin/lesspipe.sh %s
LOGNAME=oracle
LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;0 1:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.b tm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31: *.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:* .bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;3 5:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
MAIL=/var/spool/mail/oracle
ORACLE_BASE=/usr/app/oracle
ORACLE_HOME=/usr/app/oracle/product/11.2.0
ORACLE_HOSTNAME=LPLCLDDB105.phx.aexp.com
ORACLE_SID=DOC105P
ORACLE_UNQNAME=DOC105P
PATH=/usr/app/oracle/product/11.2.0/bin:/sbin:/usr/sbin:/bin:/usr/bin
PWD=/usr/app/oracle
SHELL=/bin/bash
SHLVL=1
SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
SSH_CLIENT=10.68.13.164 49281 22
SSH_CONNECTION=10.68.13.164 49281 10.68.58.50 22
SSH_TTY=/dev/pts/0
TERM=xterm
TMPDIR=/tmp
TMP=/tmp
USER=oracle
Refer to the SQL*Plus User's Guide and Reference for more information.
-bash-3.2$ sqlplus '/as sysdba'
SQL*Plus: Release 11.2.0.1.0 Production on Wed May 9 14:33:45 2012
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to an idle instance.
SQL> startup
SQL> startup
ORA-32004: obsolete or deprecated parameter(s) specified for RDBMS instance
ORACLE instance started.
Total System Global Area 534462464 bytes
Fixed Size 2215064 bytes
Variable Size 331350888 bytes
Database Buffers 192937984 bytes
Redo Buffers 7958528 bytes
Database mounted.
ORA-03113: end-of-file on communication channel
Process ID: 20688
Session ID: 9 Serial number: 3 -
While installing ECC6.0 SR3 FOR LINUX an error occured
Hi all,
While installing ECC6.0 SR3 FOR LINUX an error occured. Error Details:
ERROR 2008-10-12 20:38:59.866
FCO-00011 The step createSecureStore with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_SecureStore|ind|ind|ind|ind|8|0|createSecureStore was executed with status ERROR .WARNING 2008-10-13 18:17:26.006
Execution of the command "/opt/IBMJava2-amd64-142/bin/java -classpath /tmp/sapinst_instdir/ERP/SYSTEM/DB6/CENTRAL/AS/install/sharedlib/launcher.jar -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.security.core.server.secstorefs.SecStoreFS /tmp/sapinst_instdir/ERP/SYSTEM/DB6/CENTRAL/AS/install/lib:/tmp/sapinst_instdir/ERP/SYSTEM/DB6/CENTRAL/AS/install/sharedlib/exception.jar:/tmp/sapinst_instdir/ERP/SYSTEM/DB6/CENTRAL/AS/install/sharedlib/logging.jar:/tmp/sapinst_instdir/ERP/SYSTEM/DB6/CENTRAL/AS/install/sharedlib/tc_sec_secstorefs.jar create -s C31 -f /sapmnt/C31/global/security/data/SecStore.properties -k /sapmnt/C31/global/security/data/SecStore.key -enc -p XXXXXX" finished with return code 1. Output:
The java class is not found: com.sap.engine.offline.OfflineToolStart
ERROR 2008-10-13 18:17:26.011
CJS-30050 Cannot create the secure store. SOLUTION: See output of log file SecureStoreCreate.log:
The java class is not found: com.sap.engine.offline.OfflineToolStart.
ERROR 2008-10-13 18:17:26.235
FCO-00011 The step createSecureStore with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_SecureStore|ind|ind|ind|ind|8|0|createSecureStore was executed with status ERROR ( Last error reported by the step :Cannot create the secure store. SOLUTION: See output of log file SecureStoreCreate.log:
The java class is not found: com.sap.engine.offline.OfflineToolStart.). -
Cannot install oracle vpn on linux getting error kernel-sourcecode is neede
cannot install oracle vpn on linux getting error kernel-sourcecode is needed by gds_cisco_vpn_client-2.0-llrhel4.i386.. i already installed kernel-devel still it get the same error. pls help.
1. kernel (.rpm)
2. kernel-devel (.rpm) - containing only Makefiles and some kernel header files
3. kernel source rpm (src.rpm) - source for rebuilding the kernel
4. kernel-sourcecode (.rpm) - source-tree for developing custom kernels
are four different packages.
If you are running OEL-4 (2.6.9 kernel) and you have an ULN account, you can download kernel-sourcecode rpm from ULN. There is no kernel-sourcecode for OEL-5 available on ULN site.
NJ -
Linux/Unix error messages & troubleshooting notes
I am looking for some book/notes where i can check linux/unix error messages and what's there meaning? & possible what's fix? & any troubleshooting guide would help too....
eg
SQL> connect /as sysdba;
ERROR:
ORA-09925: Unable to create audit trail file
IBM AIX RISC System/6000 Error: 89: Invalid file system control data detected
Additional information: 9925
ORA-09925: Unable to create audit trail file
IBM AIX RISC System/6000 Error: 89: Invalid file system control data detected
Additional information: 9925DBA2008 wrote:
I am looking for some metalink notes# /document for Linux Troubleshooting, i want to know more about these topics
1. Troubleshooting Techniques
Troubleshooting methods
Best practices
Tools
2. Troubleshooting Boot Issues
Working with advanced GRUB features
Rescue and GRUB CDs
Advanced ext2/ext3 filesystem repair
Rescuing RAID and LVM volumes
3. Local Configuration
Tools to identify configuration problems
4. Hardware
Preempting hardware failures (looking for the signs)
Protecting against hardware failures
Redundant configurations
Tools to help identify hardware failures and intermittent problems
5. Applications
Tools and techniques for troubleshooting applications
Common application problems and how to solve them
6. Network
Manual configuration of network cards
Troubleshooting advanced setups (bonded interfaces, virtual interfaces)
Connectivity issues
Network diagnostic tools
7. Security
Working effectively with (and not against) security tools, including SELinux, SSL, and authentication
8. Red Hat Resources and Reporting Problems
Support options
Knowledgebase
Certified training
Initiating support calls
TAM support
Developer support
Bugzillas
Support workflow
Diagnostic and information-gathering tools
Edited by: DBA2008 on May 14, 2009 4:02 PMHave you done and got the training for RHCT/RCHE or taken advantage of training, eg cdrom or classrom, as listed here:
[http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getsearchpage?page_id=13&p_search_category_id=1345]
or
[http://education.oracle.com/pls/web_prod-plq-dad/show_desc.redirect?dc=D46590GC10&p_org_id=28&lang=US]
That would seem the most sensible way of covering that vastness of ground. -
I'm creating a DLL on a Red Hat flavor of linux. However when i'm
running into the error "Unknown Linux platform" from
platdefines.h. I don't know why its throwing this error or idea
of how to fix this problem. If anyone could help it will be
greatly appriciated.Hello Mess88,
I noticed in your first post you mentioned that you are trying to create a
DLL. I would assume that you are actually trying to create .so file as
Linux is unable to handle DLLs. I noticed that LabVIEW will still have a
default name of My DLL but it will actually be a .so file.
After looking through the platdefines.h file I was able
to determine the section that yields this error:
#if defined(i386)
#define ProcessorType
kX86
#define NI_BIG_ENDIAN
0
#elif defined(__alpha)
#define ProcessorType
kDECAlpha
#define NI_BIG_ENDIAN
0
#elif defined(powerpc)
#define ProcessorType
kPPC
#define NI_BIG_ENDIAN
1
#elif defined(sparc)
#define ProcessorType
kSparc
#define NI_BIG_ENDIAN
1
#elif defined(mips)
#define ProcessorType
kMIPS
#define NI_BIG_ENDIAN
1
#elif defined(arm) || defined(__arm__)
#define ProcessorType
kARM
#define NI_BIG_ENDIAN
0
#elif defined(__x86_64__)
#define ProcessorType
kX64
#define NI_BIG_ENDIAN
0
#else
#error "Unknown Linux platform"
#endif
So it looks like it checks to see the type of processor that you have and if
it is not one of the types listed in the "if else" statements then it
will eventually get to the "Unknown Linux Platform" error. Can
you verify what processor you are using?
Also, is this the first time that you have tried to implement a solution
like this before? Did it ever work in the past or would you get this
error no matter what you tried to do. Please just let me know if you have
any further questions! I hope this helps!
Thanks!
Bob H
Applications Engineer
National Instruments -
Linux-x86_64 Error: 28: No space left on device
10gR2 (10.2.0.3)
RHEL 4 AS 64-bit
Hi All,
After I created my RAC database with DBCA, I tried to connect to the database and got the following error:
SQL> startup
ORA-27102: out of memory
Linux-x86_64 Error: 28: No space left on device
SQL> startup pfile='/opt/app/oracle/product/10.2.0/db_1/dbs/initFPRCPROD.ora'
ORA-27102: out of memory
Linux-x86_64 Error: 28: No space left on device
SQL> startup mount pfile='/opt/app/oracle/product/10.2.0/db_1/dbs/initFPRCPROD.ora'
ORA-27102: out of memory
Linux-x86_64 Error: 28: No space left on device
I also tried to do what the following person did:
ORA-27102: out of memory
But changing the SHMALL kernel parameter still didn't change anything...I still got the error.
Any ideas?
Thank you.(Duplicate thread)
ORA- 27102 out of memory and Linux Error: 28: No space left on device -
Unable to install JRun on Linux receive error while loading shared libraries
I'm installing JRun trial version on Ubuntu with java version
"1.6.0_07". I receive the following errors when I install:
guest:~/Desktop$ sh ./jrun-40-linux-en.bin -i gui
Preparing to install...
Extracting the installation resources from the installer
archive...
Configuring the installer for this system's environment...
dirname: error while loading shared libraries: libc.so.6:
cannot open shared object file: No such file or directory
/bin/ls: error while loading shared libraries: librt.so.1:
cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6:
cannot open shared object file: No such file or directory
dirname: error while loading shared libraries: libc.so.6:
cannot open shared object file: No such file or directory
basename: error while loading shared libraries: libc.so.6:
cannot open shared object file: No such file or directory
Launching installer...
rm: error while loading shared libraries: libc.so.6: cannot
open shared object file: No such file or directory
rm: error while loading shared libraries: libc.so.6: cannot
open shared object file: No such file or directoryI get that error too when try to install Jrun 4.0 on Open
Suse 11.0, Can anyone show me how to solve that problem. -
SUN Java WebServer on Linux install error
Hi All
I am trying to install SUN JavaWebServer 6.1 SP2 on linux.
My environment is
Red Hat Enterprise Linux ES release 3 (Taroon Update 6)
Kernel 2.4.21-37.ELsmp on an i686
I am logged in as root.
I got the software sun-webserver61-rh72[1].tar.gz from sun site, after extracting when run using
./setup
After I pass through
1. accepting license
2.express install option,
3. /opt/SUNWwbsvr as location
4.install all components [1. Sun ONE Web Server, Enterprise Edition (2)] screens
I get thie error
ERROR: AdminSysUser not specified in install cache [tmp/fileACNAs8]
ERROR. Failure installing Server Core. Do you want to continue [n]?
and the installer terminates.
Can someone plese tell me the problem here.
Regards
bibI could install it in a different machine (linux). However on the machine it failed, it never asked me to enter the user name. Where do I enter it.
On the machine where I was succesfull, i was prompted to enter admin user name.
Thanks
bib -
Oracle 9.0.1 installation on RH Linux 9 : Error in CreateOUIProcess : 13
Hi,
I am trying to install Oracle 9.0.1 on Red Hat Linux 9 and in the process I am getting error.
I have installed jdk 1.3.1_15. In spite of setting JAVA_HOME, JDK_HOME, JRE_HOME to appropriate oracle installer does not picks up jre properly and tries to search it in bin/jre (this is wrt current directory , i.e. wrt diectory where runInstaller is present)
Hence finally I copied entire jre directory on above installation to bin/jre
After that oracle installer is able to pick up jre however it started giving error.
Initializing Java Virtual Machine from bin/jre. Please wait...
Error in CreateOUIProcess(): 13
: Permission denied
Please let me know if any changes are required in above process to rectify the error.
Thanks & Regards,
Sujit9i R2 is not certified with RedHat 9.0
Check the certified table on http://metalink.oracle.com => Certify and Avalaibility
Fred -
Oracle 8.0.5.1 on Linux/critical error
Hello!
My Oracle database (running under Linux) terminated by itself and
doesn't like
to start anymore.
When starting, I get the following error:
------>
Oracle Server Manager Release 3.0.5.0.0 - Production
(c) Copyright 1997, Oracle Corporation. All Rights Reserved.
Oracle8 Enterprise Edition Release 8.0.5.1.0 - Production
With the Partitioning and Objects options
PL/SQL Release 8.0.5.1.0 - Production
SVRMGR> Connected.
SVRMGR> ORACLE instance started.
Total System Global Area 4853008 bytes
Fixed Size 48400 bytes
Variable Size 4321280 bytes
Database Buffers 409600 bytes
Redo Buffers 73728 bytes
Database mounted.
ORA-00470: LGWR process terminated with error
<-------
In alert_orca.log I find:
------->
PMON started with pid=2
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
Fri Jul 2 12:03:40 1999
starting up 1 shared server(s) ...
starting up 1 dispatcher(s) for network protocol
'(ADDRESS=(PARTIAL=YES)(PROTOCO
Fri Jul 2 12:03:40 1999
alter database mount
Fri Jul 2 12:03:44 1999
Successful mount of redo thread 1, with mount id 338893408.
Fri Jul 2 12:03:44 1999
Database mounted in Exclusive Mode.
Completed: alter database mount
Fri Jul 2 12:03:44 1999
alter database open
Fri Jul 2 12:03:44 1999
Rolling back half complete log switch of thread 1
Fri Jul 2 12:03:44 1999
Errors in file
/opt/oracle/app/oracle/admin/orca/bdump/lgwr_orca_2545.trc:
ORA-07445: exception encountered: core dump [11] [43] [] [] [] []
Fri Jul 2 12:03:48 1999
ORA-470 signalled during: alter database open ...
Fri Jul 2 12:04:43 1999
PMON: terminating instance due to error 470
Instance terminated by PMON, pid = 2541
<-------
and in lgwr_orca_2545.trc:
------->
root@asenath:/opt/oracle/app/oracle/admin/orca/bdump > cat
lgwr_orca_2545.trc
Dump file
/opt/oracle/app/oracle/admin/orca/bdump/lgwr_orca_2545.trc
Oracle8 Enterprise Edition Release 8.0.5.1.0 - Production
With the Partitioning and Objects options
PL/SQL Release 8.0.5.1.0 - Production
ORACLE_HOME = /opt/oracle/app/oracle/product/8.0.5
System name: Linux
Node name: asenath
Release: 2.0.36
Version: #8 Tue Dec 8 15:34:59 MET 1998
Machine: i686
Instance name: orca
Redo thread mounted by this instance: 1
Oracle process number: 4
Unix process pid: 2545, image: ora_lgwr_orca
*** SESSION ID:(3.1) 1999.07.02.12.03.44.719
Exception signal: 11, code = 2b
ORA-07445: exception encountered: core dump [11] [43] [] [] []
<-------
and a long ugly dump. If you need this dump or any kind of
further information please do not hesitate to contact me using
mailto:[email protected]
Hope to from you- best regards,
Sven
nullIs your /opt or any other filesystem full?
Sven Arndt (guest) wrote:
: Hello!
: My Oracle database (running under Linux) terminated by itself
and
: doesn't like
: to start anymore.
: When starting, I get the following error:
: ------>
: Oracle Server Manager Release 3.0.5.0.0 - Production
: (c) Copyright 1997, Oracle Corporation. All Rights Reserved.
: Oracle8 Enterprise Edition Release 8.0.5.1.0 - Production
: With the Partitioning and Objects options
: PL/SQL Release 8.0.5.1.0 - Production
: SVRMGR> Connected.
: SVRMGR> ORACLE instance started.
: Total System Global Area 4853008 bytes
: Fixed Size 48400 bytes
: Variable Size 4321280 bytes
: Database Buffers 409600 bytes
: Redo Buffers 73728 bytes
: Database mounted.
: ORA-00470: LGWR process terminated with error
: <-------
: In alert_orca.log I find:
: ------->
: PMON started with pid=2
: DBW0 started with pid=3
: LGWR started with pid=4
: CKPT started with pid=5
: SMON started with pid=6
: RECO started with pid=7
: Fri Jul 2 12:03:40 1999
: starting up 1 shared server(s) ...
: starting up 1 dispatcher(s) for network protocol
: '(ADDRESS=(PARTIAL=YES)(PROTOCO
: Fri Jul 2 12:03:40 1999
: alter database mount
: Fri Jul 2 12:03:44 1999
: Successful mount of redo thread 1, with mount id 338893408.
: Fri Jul 2 12:03:44 1999
: Database mounted in Exclusive Mode.
: Completed: alter database mount
: Fri Jul 2 12:03:44 1999
: alter database open
: Fri Jul 2 12:03:44 1999
: Rolling back half complete log switch of thread 1
: Fri Jul 2 12:03:44 1999
: Errors in file
: /opt/oracle/app/oracle/admin/orca/bdump/lgwr_orca_2545.trc:
: ORA-07445: exception encountered: core dump [11] [43] [] [] []
: Fri Jul 2 12:03:48 1999
: ORA-470 signalled during: alter database open ...
: Fri Jul 2 12:04:43 1999
: PMON: terminating instance due to error 470
: Instance terminated by PMON, pid = 2541
: <-------
: and in lgwr_orca_2545.trc:
: ------->
: root@asenath:/opt/oracle/app/oracle/admin/orca/bdump > cat
: lgwr_orca_2545.trc
: Dump file
: /opt/oracle/app/oracle/admin/orca/bdump/lgwr_orca_2545.trc
: Oracle8 Enterprise Edition Release 8.0.5.1.0 - Production
: With the Partitioning and Objects options
: PL/SQL Release 8.0.5.1.0 - Production
: ORACLE_HOME = /opt/oracle/app/oracle/product/8.0.5
: System name: Linux
: Node name: asenath
: Release: 2.0.36
: Version: #8 Tue Dec 8 15:34:59 MET 1998
: Machine: i686
: Instance name: orca
: Redo thread mounted by this instance: 1
: Oracle process number: 4
: Unix process pid: 2545, image: ora_lgwr_orca
: *** SESSION ID:(3.1) 1999.07.02.12.03.44.719
: Exception signal: 11, code = 2b
: ORA-07445: exception encountered: core dump [11] [43] [] [] []
: <-------
: and a long ugly dump. If you need this dump or any kind of
: further information please do not hesitate to contact me using
: mailto:[email protected]
: Hope to from you- best regards,
: Sven
null -
Oracle instant Client and unixODBC for Linux has Error
Hi experts,
I have two Redhat EL 5. On the first Rehat(xxx.xxx.xxx.121 --> called Redhat1) I have installed Oracle 10g database server. On the second Redhat(xxx.xxx.xxx.123 --> called Redhat2) I want to connect to Oracle database server on xxx.xxx.xxx.121 via ODBC. But it does not work. Pls help me!
I have done steps as following:
Login to Redhat2 as root and type commands:
1)Install Instant Client + sqlplus
# rpm -ivh oracle-instantclient-basic-10.2.0.4-1.i386.rpm
# rpm -ivh oracle-instantclient-sqlplus-10.2.0.4-1.i386.rpm
2)Setting environment variable
# LD_LIBRARY_PATH=/usr/lib/oracle/10.2.0.4/client/lib:${LD_LIBRARY_PATH}; export LD_LIBRARY_PATH
# SQLPATH=/usr/lib/oracle/10.2.0.4/client/lib:${SQLPATH}; export SQLPATH
3)Testing connection to Redhat1(Oracle DB server) using sqlplus
# sqlplus abc/[email protected]:1521/lab2
Connected.
5)Begin to install unixODBC
# rpm -ivh oracle-instantclient-odbc-10.2.0.4-1.i386.rpm
# rpm -ivh unixODBC-2.2.11-7.1.i386.rpm
# rpm -ivh unixODBC-devel-2.2.11-7.1.i386.rpm
# rpm -ivh unixODBC-kde-2.2.11-7.1.i386.rpm
6)After installation above packages I check for existing of odbc.ini and odbcinst.ini in /etc --> ok
# ls /etc | grep odbc
odbc.ini
odbcinst.ini
7) Tar unixODBC-2.2.14-linux-x86-32.tar.gz and copy file to /usr/local/bin, /usr/local/include, /usr/local/lib
# tar -xzf unixODBC-2.2.14-linux-x86-32.tar.gz
# ls /usr/local/bin/
dltest isql iusql odbc_config odbcinst
# ls /usr/local/include
autotest.h odbcinstext.h odbcinst.h sqlext.h sql.h sqltypes.h sqlucode.h unixodbc_conf.h uodbc_extras.h uodbc_stats.h
# ls /usr/local/lib
libboundparam.la libgtrtst.la libodbccr.la libodbcinst.la libodbc.la
libboundparam.so libgtrtst.so libodbccr.so libodbcinst.so libodbc.so
libboundparam.so.1 libgtrtst.so.1 libodbccr.so.1 libodbcinst.so.1 libodbc.so.1
libboundparam.so.1.0.0 libgtrtst.so.1.0.0 libodbccr.so.1.0.0 libodbcinst.so.1.0.0 libodbc.so.1.0.0
# NLS_LANG=AMERICAN_AMERICA.UTF8; export NLS_LANG
# TNS_ADMIN=/root; export TNS_ADMIN
# ODBCINI=/etc/odbc.ini; export ODBCINI
7)Retest sqlplus to Redhad1(Oracle database server) with local tnsname
# sqlplus vonphoto/vonphoto@lab2
SQL*Plus: Release 10.2.0.4.0 - Production on Sat Mar 27 03:20:55 2010
Copyright (c) 1982, 2007, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
8) Edit odbc.ini and odbcinst.ini
---odbcinst.ini
# Included in the unixODBC package
[Oracle 10g ODBC driver]
Description = Oracle ODBC driver for Oracle 10g
Driver = /usr/lib/oracle/10.2.0.4/client/lib/libsqora.so.10.1
Setup =
FileUsage =
CPTimeout =
CPReuse =
---odbc.ini
[ora_dns]
Driver = Oracle 10g ODBC driver
DSN = ora_dns
ServerName = xxx.xxx.xxx.121
UserID = vonphoto
Application Attributes = T
Attributes = W
BatchAutocommitMode = IfAllSuccessful
BindAsFLOAT = F
CloseCursor = F
DisableDPM = F
DisableMTS = T
EXECSchemaOpt =
EXECSyntax = T
Failover = T
FailoverDelay = 10
FailoverRetryCount = 10
FetchBufferSize = 64000
ForceWCHAR = F
Lobs = T
Longs = T
MetadataIdDefault = F
QueryTimeout = T
ResultSets = T
SQLGetData extensions = F
Translation DLL =
Translation Option = 0
DisableRULEHint = T
TraceFile = /backup/sql.log
Trace = Yes
9)Testing the driver and the data source
# odbcinst -q -d
[Oracle 10g ODBC driver]
# odbcinst -q -s
[ora_dns]
10) Test connection via ODBC from Redhat2(xxx.xxx.xxx.123) to Redhat1(xxx.xxx.xxx.121)
# isql -v ora_dns
isql: error while loading shared libraries: libreadline.so.3: cannot open shared object file: No such file or directory
I have spent 4 days to search on the internet. But it still error.
Pls help me.Apologies - thought it was a database to database connection that you were trying to create.
isql: error while loading shared libraries: libreadline.so.3: cannot open shared object file: No such file or directoryThe readline library is in package readline-4.3-13 on RHEL4 and in readline-5.1-1.1 for RHEL5 on my servers (minor version number are of course dependent on the kernel version used).
This is also not an ODBC or Oracle issue. It seems that isql is using rlwrap or similar - this requires the readline library. And possibly LD_LIBRARY_PATH to be set too. -
Content Server error on LINUX (HTTP error: 404 Not Found)
Hi All,
While checking the status of content sever by using the T-code CSADMIN I am getting the following error message.
<b>***********************************************************
Error : - HTTP error: 404 Not Found
Message no. CMS025
Diagnosis
Error in accessing via HTTP
404 Not Found
*************************************************************</b>
I have done the installation of Content server 640 on Red Hat Linux / MaxDB.
Moreover I am using the following connection data in CSADMIN.
HTTP server :- 80.0.0.205
Port Number:- 1090
HTTP Script :- ContentServer/ContentServer.dll
Version no. :- 0046
Please help me.
Thanks ,
HarshalHi Dagmar,
The HTTP services are working fine. But i m not able to reach the content server url can u help on this?
Please find the http trace file
ERROR => PlugInHandleServData: HttpParseRequestHeader failed (rc=701) [http_plg.c 3258]
ERROR => IcmHandleNetWrite(id=3/4782): HandleServData failed (rc=701) [icxxthrio.c 1833]
The error i am getting in Content server url is
Server Error
404 - File or directory not found.
The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.
Maybe you are looking for
-
Need some Help with the new Genius Mixes on iTunes 9
I would like to know how to use the New Genius Mixes on iTunes 9. I don't quit know how to use it yet and like all of us we're all just learning how to use the Genius Mixes. I did watch the KeyNote but they didn't go into great detail on how to use i
-
Creating an html file in XI using an xsl stylesheet -- two error types
Hi I am working on mapping an xml invoice to an html-file using a stylesheet (xsl-file) in the message mapping in XI 3.0. Thus the inbound message is an xCBL Invoice and the output message is to be an html file. I name the output file "%supplierid%
-
Problem authenticating user in Active Directory cross domain
Hi, We have two different AD servers serving our London and Tokyo networks. My application runs in London network but used by both London and Tokyo users. The two ADs have domain trust setup between them. I have groups defined in London AD to which u
-
Store Counter Number in BODS using Global/Local Variable
Hi All, Anyone done before adding a counter integer field into a table based on key via BODS? Example: Table 1 (contains just 1 field) <-Input: Key 1 Key 1 Key 2 Key 2 Key 2 Table 2(contains 2 fields with INT as the 2nd field) <-Output: Key 1 1
-
Cisco MDS 9148 Inventory Collection
Hi I get the following error on an inventory collection of a MDS 9148 (NOS 5.0.4). I have tried deleting and recreating the device. RME 4.3.1 RICS0001:Internal Error,unable to process the collected data from the device. [ Thu Dec 30 13:48:46 GMT 201